CQ Amateur Radio

MATH’S NOTES

t is not too often that we discuss components, but this month I would like to introduce you to a relatively new and unique device, the . Most of us are familiar with common capacitors, from the tiny ceramic pF versions up through the paper and Mylar devices and eventually to the electrolytic. We are also familiar with various common and “standard” capacitor values such as picofarads (pF) and microfarads (μF) from less than 1 picofarad to many hundreds

You’re reading a preview, subscribe to read more.

More from CQ Amateur Radio

CQ Amateur Radio6 min read
Vhf Plus
During August, an impressive high-pressure system was in place over the middle of the country, bringing sweltering heat and weeks without rain. A silver lining to the weather, however, was the tropospheric ducting that resulted across the region. Pho
CQ Amateur Radio3 min read
Antennas
I have been doing a lot of work on direction-finding antennas lately, so it sure seemed like it would be a good topic for this issue. In Photo A, we have the classic ferrite rod antenna used in most AM radios, often called a wave magnet in the early
CQ Amateur Radio10 min read
Transceiver to Computer Interface
Many modern-day amateur radio programs use a single USB cable between the transceiver and computer to transfer three basic types of information; audio signals which can include SSB, RTTY, digital or CW signals, critical transceiver control and pollin

Related Books & Audiobooks