Escolar Documentos
Profissional Documentos
Cultura Documentos
Sarah M. Don
Chemistry EEI
Semester 4, 2008
Dr Stolarchuk
2 Aim 6
3 Procedure 6
4 Results 7
5 Product Evaluation 8
5.1 Sard Wonder Soap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5.2 Baking Soda . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5.3 OMO Liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5.4 Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5.5 Napisan Oxy-Action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5.6 Bleach . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5.7 Lemon Juice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5.8 Tap Water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5.9 Overall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6 Conclusion 11
1
C Conductivity of the Stain Removal Solutions 16
C.1 Aim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
C.2 Equipment and Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
C.3 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
C.4 Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2
1 Background
There are many different methods for the removal of stains. However, various types of stain removers work
differently on varying stains. It is important to understand the science behind why different stain removal
solutions work in order to know what kind of solvent to use on a certain kind of identifiable stain. A stain’s
constituents’ molecular structure and composition determine how well and in what way the stain can be
removed from the fabric.
1.1.3 Pigments
Most pigments contain chromophores which are molecules that contain double bonds that absorb and emit a
particular wavelength of light which defines the colour of the stain. Tannin, an organic compound, is a kind
of pigment with a red-brown colour found in coffee and red wine. Tannin, however, is not very responsive
to oxidation and basic solvents, thus making it difficult to remove from fabrics. The green colour of grass is
provided by the pigment chlorophyll, also an organic chromophore.
1.2.1 Water
Water is considered a universal solvent. Because of the bent water molecule’s polarity, it is able to dissolve
other polar molecules as well as ionic compounds. As mentioned in Section 1.2, water is an inorganic solvent,
so it can only dissolve inorganic substances. However, with the aid of surfactants (such as detergent), organic
substances can also be suspended in an aqueous solution.
3
1.2.2 Surfactants
Surfactants are molecules that have one polar end and one non-polar end, making them able to reduce
the surface tension of a solvent or reduce the interfacial tension between two solutions. Micelles, such as
phospholipids, have a hydrophobic (non-polar) and a hydrophilic (polar) end that allow it to form a layer
between water-based and oil-based substances (see Figure 1).
Surfactants can emulsify compounds that are not normally soluble in a particular medium. (Wikipedia,
2008) The micelles form a coating on the insoluble particles, and because the micelle itself is soluble because
of the head group’s favourable interactions with the water, the previously insoluble compound can then be
dissolved. (Donker, 1998)
1.2.3 Phosphates
Phosphates are ionic compounds that contain a phosphate group (PO4 −3 ). The part of blood that causes
the rust-coloured stain to occur is iron oxide (Fe2 O3 ). Iron phosphate, however, is colourless, so solutions
that contain phosphates are able to ‘remove’ blood stains because a displacement reaction occurs between
the iron oxide and the phosphate compound.
F e2 O3 + 2XP O4 → 2F eP O4 + X2 O3
The oxide group in Fe2 O3 is replaced with a phosphate group to make FePO4 , which is colourless. However,
the actual mass of the biological material remains in the fabric unless surfactants are present to dissolve the
organic material as well.
1.2.5 Enzymes
Some laundry detergents contain enzymes. Certain molecules of the stain latch onto the active site of an
enzyme as the substrate to form an enzyme/substrate complex, and the enzyme breaks the molecule into
smaller sections that may be more easily dissolved (see Figure 2). Such enzymes suited to laundering usually
4
work best in warm water, and so instructions on laundry detergents’ packaging to use warm water is sometimes
an indication that the detergent contains enzymes.
On the other hand, sometimes laundry detergents incorrectly state on the packaging that they contain
enzymes. Often, however, what they really mean is that the laundry detergent contains oxidising agents.
1.2.7 Temperature
Besides facilitating the function of enzymes, temperature has other effects on how well laundry detergents (or
any other solvents) work. By increasing the temperature, the particles in both the stain and the solvent are
given more energy, causing them to vibrate faster. This assists the solvent in dislocating the stain particles
from the fibers of the fabric, and also makes it more difficult for the stain to reattach. Too much heat can
sometimes cause certain types of stain to become ‘fixed’ or ‘set’ into the fibers of the fabric which makes the
stain particles even harder to remove. However, cold water may not allow the chemical ingredients in the
stain removal solution to do their job properly.
5
2 Aim
The objective of this investigation was to identify the effectiveness of certain laundry detergents and stain
removal methods by comparing their constituents’ chemical properties.
3 Procedure
1. Extensive background research was done on the constituents of stains and laundry detergents, as well
as other stain removal methods.
3. MSDS sheets of the hazardous chemicals required to conduct the experiments were obtained. (See
Appendix F)
4. A journal containing research, notes, ideas, planning and the results of the experiments was maintained
throughout the investigation.
5. A cleaning test was conducted to identify which stains could be removed by which stain removal
solutions. (See Appendix A)
7. The conductivity of the stain removal solutions was tested. (See Appendix C)
8. The solubility of the stain removal solutions in water, oil, acid and basic solvents. (See Appendix D)
9. The redox potential of the stain removal solutions was determined. (See Appendix E)
10. This research paper was written to explain the science behind the results of this extended experimental
investigation.
6
4 Results
7
5 Product Evaluation
5.1 Sard Wonder Soap
Sard Wonder Soap is alkaline and contains surfactants, reducing agents and some ionic compounds. It is also
soluble in basic solvent and partially soluble in water and oil. This suggests that the soap contains molecules
with the properties of a base, fats (surfactants), polar and possibly ionic compounds. Most of the stains
responded well1 to Sard Wonder Soap, except foundation and ink. However, foundation and ink responded
better to Sard Wonder Soap than to any other cleaning solution.
Most of the stains’ strength of colour was heavily reduced, however traces of the stains did remain. The
mass of the stains was most likely removed by the surfactants and oxidising agents in the soap. Both organic
and inorganic parts of the stain were able to be removed because of the polarity of the water in which the
Sard Wonder Soap was dissolved, and the glycerol that the soap most likely contained.
F e2 O3 + 6N aHCO3 → 2F e(HCO3 )3 + 3N a2 O
The results that showed that baking soda does not have redox potential may explain why it was not as
effective as other cleaners in removing the other stains.
5.4 Drive
Drive laundry detergent worked similarly to baking soda in that it only worked well on the beetroot and
blood stains. The packaging of the laundry power suggested the use of warm water, which implies the possible
presence of enzymes. As only cold water was used, it is possible that Drive was not able to work to its full
potential.
Drive did show some impact on the foundation stain. However, it was not soluble in oil, which suggests
that the Drive was able to remove some other part of the foundation stain other than the oil - possibly part
or one kind of pigment.
1
received a rating of 4 or greater in Table 2
8
5.5 Napisan Oxy-Action
With its basic nature, high conductivity, redox potential and solubility in water, acid and base, Napisan
Oxy-Action had an effect on all the stains. However, like most of the other stain removal solutions, Napisan
Oxy-Action was not so good at removing the foundation and ink stains. Napisan Oxy-Action’s conductivity
indicates that it contains ionic particles, and its redox potential (and effectiveness on the same stains as
bleach) suggests that it contains solid sodium hypochlorate (bleach).
5.6 Bleach
Bleach was clearly the most efficient stain removal method. It is likely that the other cleaning solutions
that worked fairly well on the same kinds of stains contained a small amount of some kind of bleach. As
discussed in the background section, the hydrogen peroxide in bleach is a strong oxidising agent that is able
to convert some of the double bonds in chromophores to single bonds through redox reactions, removing the
chromophore’s ability to display colour.
The sodium hyperchlorate and hydrogen peroxide in bleach can also liberate oxygen.
N aOCl + H2 O2
O2 + N aCl + H2 O
In this instance, the hydrogen peroxide acts as the reducing agent, and the oxygen that is produced from the
reaction disturbs the stain particles and may dislodge them from the fibers of the fabric. One observation
was that the bleach slightly discoloured the stark white cotton fabric of the square that had no stain applied
to it. So the hydrogen peroxide even attacked the bright white chromophores in the fabric.
5.9 Overall
It would seem from the results that baking soda was chemically similar to Drive. They both worked on the
same stains to a similar extent, however, their pH, conductivity, solubility and redox potential were different.
So they are most likely not chemically similar, however, their chemical constituents work on similar parts of
the same stains.
9
It also seems that Sard Wonder Soap, OMO Liquid, Napisan Oxy-Action and bleach all have similar
chemical constituents. As they all have redox potential and are soluble in bases, it is likely that Sard Wonder
Soap, OMO Liquid and Napisan Oxy-Action contain some form of bleach. However, Sard Wonder Soap was
most likely the only laundry detergent that contained surfactants as it was the only stain remover that had
a real effect on the foundation and ink stains.
Lemon juice and tap water were not very effective at removing any of the stains in the stain test. This is
probably because water only has the attribute of polar molecules that are only able to dissolve other polar
molecules, and lemon juice contains oil and citric acid which only allow it to dissolve oil-based and acidic
stains.
All the stain removers except for lemon juice and tap water were able to effectively remove blood stains,
which indicated the presence of phosphates. There were not any anomalous results.
The toughest stains are those that contained pigments, which only stain removers containing bleach or
other oxidising agents were able to remove. Blood was able to be removed by stain removers that contained
phosphates. Heavy, oil-based stains such as that of foundation and ink required surfactants (only present in
Sard Wonder Soap) in order to be removed.
10
6 Conclusion
The data collected from the five experiments in this extended experimental investigation were quite compre-
hensive. This provided enough chemical information about the stain removal solutions to be able to draw
conclusions about the chemical mechanisms of stain removal present throughout the investigation. However,
there were some procedural inaccuracies that could have been further improved.
Warm water is sometimes required of laundry detergents in order for them to work properly. As discussed
in the background section of this paper, an increase in temperature provides the molecules of both the stain
and the cleaner with more energy, causing them to vibrate and move around more. By providing the particles
with more energy, redox reactions and dissolvation occurs more rapidly and is therefore more effective. Only
cold water was used during the investigation because the stains were left to soak for such a long period of
time, so it is possible that not all the laundry detergents worked to their full potential. An improvement to
the method of the stain experiment would have been to use warm or hot water instead of cold.
The concentrations of the stain removal solutions used in this investigation were not of the same concen-
tration that would be used in a load of washing. This could have provided misleading results. However, the
concentrations were actually higher than if the were the true concentrations used in a load of washing. If
the results were affected in any way, they were only made clearer because the concentration would have been
high enough for the chemicals that did actually work on the stain to work to their full potential (disregarding
temperature), while the parts of the stain that could not be removed by the cleaner remained on the fabric
at the end of the cleaning test.
This investigation could have been improved by testing a wider variety of cleaning solutions on more
kinds of stains. Also, the presence of true enzymes (as opposed to oxidising agents) could be investigated.
Further separation of the chemical constituents of the laundry detergents could be done in order to identify
particular ingredients, their chemical properties, and role in stain removal.
Overall, the investigation provided accurate results that allowed the identification of different types of
stain removal solutions constituents and how they assisted in the removal of certain parts of different kinds
of stains.
11
References
[1] Calder, V. (2008) ”Stain Removal”, Ask A Scientist, Argonne National Laboratory,
http://www.newton.dep.anl.gov/askasci/chem00/chem00229.htm (23/08/08)
[2] Calder, V. (2008) ”Ethanol as a Stain Remover”, Ask A Scientist, Argonne National Laboratory,
http://www.newton.dep.anl.gov/askasci/chem07/chem07002.htm (23/08/08)
[3] Calder, V. (2008) ”Bonds and Stains on Fabrics”, Ask A Scientist, Argonne National Laboratory,
http://www.newton.dep.anl.gov/askasci/chem03/chem03660.htm (23/08/08)
[4] Calder, V. (2008) ”Measuring Stain Intensity”, Ask A Scientist, Argonne National Laboratory,
http://www.newton.dep.anl.gov/askasci/chem03/chem03813.htm (23/08/08)
[5] Calder, V. (2008) ”Phosphate and Stain Removal”, Ask A Scientist, Argonne National Laboratory,
http://www.newton.dep.anl.gov/askasci/chem03/chem03735.htm (23/08/08)
[6] Cross, J. (2006) ”The makeup of the toughest stains”, CleanPros Online,
http://www.cleanprosonline.com/Toughest stains.html (10/09/08)
[7] Donker, C.B. (1998) Non-aqueous Liquid Cleaning Products Which Contain Modified Silica, US Patent
vol.5, no.714, pp.449.
[9] Rainbow International (2007) ”Spot and Stain Removal Guide”, Rainbow International Restoration and
Cleaning, http://www.rainbowintl.com/expert/guide.aspx?c (10/09/08)
[18] Yamada, I. (2003) The difference between anionic and nonionic surfactant, and its appliation to deter-
gent, Chemistry Question, http://www.chemistryquestion.com (07/09/08)
12
A Stain Removal Solutions’ Effectiveness on Different Stains
A.1 Aim
The aim of this experiment was to identify which stain removal solutions were able to remove which stains
and how effectively the stains were removed.
A.3 Procedure
1. Each of the stains (coffee, beetroot, blood, grass, red wine, foundation, black ink) were applied to 8
pieces of white cotton each and left to dry for 24 hours.
2. 8 50mL beakers were filled with Sard Wonder Soap solution which was made by adding 1g of shavings
of the soap to 50mL of water in each beaker and stirring vigorously until all the soap was dissolved.
3. 8 50mL beakers were filled with baking soda solution which was made by dissolving 1g of baking soda
in 50mL of tap water for each beaker.
4. 8 50mL beakers were filled with OMO Liquid solution which was made by adding 1mL of OMO Liquid
to 50mL of tap water for each beaker.
5. 8 50mL beakers were filled with Drive solution which was made by adding 1g of laundry powder to
50mL of warm tap water for each beaker. (warm water was only used to assist with dissolving the
powder in the water)
6. 8 50mL beakers were filled with Napisan Oxy-action solution which was made by adding 1g of laundry
powder to 50mL of warm tap water for each beaker. (warm water was only used to assist with dissolving
the powder in the water)
7. 8 50mL beakers were filled with bleach solution which was made by adding 10mL of bleach to 50mL
of tap water for each beaker.
10. Once all the solutions were of room temperature, one of each of the stains and the control (no stain)
were added to the 8 beakers containing Sard Wonder Soap solution, making sure that the entire fabric
square was submerged in the stain removal solution.
11. Step 10 was repeated for the other 7 stain removal solutions (including water) so that a grid of test
beakers was set up so each combination of stain and stain remover was tested.
13
12. After the cotton squares were left to soak for 24 hours, they were rinsed in cold tap water.
A.4 Results
14
B Determining the pH of the Stain Removal Solutions
B.1 Aim
The aim of this experiment was to determine the pH of each of the stain removal solutions.
B.3 Procedure
1. Each if the stain removal solutions were prepared as in Experiment 1 (see Appendix A)
2. 10mL of each stain removal solution was poured into it’s own 50mL beaker.
3. The beakers were filled to the 20mL mark with distilled water.
5. The pH was identified by using the universal indicator pH colour chart to match the colour of the
solution in each beaker to the corresponding pH on the chart.
B.4 Results
Cleaning solution pH
Sard Wonder Soap 9
Baking soda 8
Omo Liquid 7
Drive 11
Napisan Oxy-action 10
Bleach 8
Lemon juice 4
Tap water (control) 7
15
C Conductivity of the Stain Removal Solutions
C.1 Aim
To determine the conductivity of the stain removal solutions.
C.3 Procedure
1. A beaker containing 25mL of distilled water was placed in the conductivity testing apparatus so that
the electrodes were submerged.
2. The brightness of the light bulb was noted. This set the marker for the least conductive solution.
3. The electrodes were rinsed off with distilled water into the 100mL beaker.
4. Steps 1-2 were repeated for the beaker containing 25mL of NaCl solution. This set the marker for the
most conductive solution.
5. The conductivity of the 8 stain removal solutions (Sard Wonder Soap, baking soda, Omo Liquid, Drive,
Napisan Oxy-action, bleach, lemon juice and tap water) was tested by comparing and rating the light
bulb’s brightness for each solution as an indicator of its conductivity.
C.4 Results
16
D Solubility of the Stain Removal Solutions
D.1 Aim
To determine the solubility of the stain removal solutions in water, oil, acids and bases.
D.3 Procedure
1. 8 of the test tubes were filled with 10mL tap water each, 8 with vegetable oil, 8 with 0.1M HCl and 8
with 0.1M NaOH.
2. 5mL of each of the stain removal solutions was added to each of the solvents so that a test grid was
made so that each combination of stain removal solution and solvent was tested.
3. Each of the mixtures in the test tubes were stirred vigorously with a bamboo skewer, using a different
skewer in each test tube.
4. The test mixtures were left for 24hrs so that it was clear which solutions were dissolved and which
were suspended.
D.4 Results
X = soluble, * = partially soluble, × = insoluble 1 Water-based lemon juice was suspended 2 Lemon oil
was suspended
17
E Redox Indicator Test
E.1 Aim
The aim of this experiment was to identify the redox potential of each of the stain removal solutions.
E.3 Procedure
1. The cleaning solutions were prepared as in Experiment 1 (see Appendix A).
2. 25mL of 0.1M Hydrogen Peroxide was added to the remaining 50mL beaker as the control.
3. Acidified potassium permanganate was made by mixing 50mL of 0.1M HCl with 50mL of KMnO4 .
4. Even amounts of acidified potassium permanganate were added to each of the beakers containing the
stain removal solutions as well as the control.
5. The solutions were observed over 30 minutes. The solutions that returned clear or to their original
colour (ie. did not remain pink from the acidified potassium permanganate) were identified as having
undergone a redox reaction and therefore had redox potential.
E.4 Results
18