Escolar Documentos
Profissional Documentos
Cultura Documentos
Page 1 of 1
Dowels
Dowel Bar Requirements: a. Plain Round Bars: ASTM A615M, Grade 400 or higher. b. Epoxy Coating: AASHTO M254, Type B. Minimum Coating Thickness of 0.15 mm after cure. c. Length: 450 mm d. Diameter: as ordered
Skewed Contraction Basket Assembly Requirements: e. Skew: One longitudinal to six transverse. f. To support the ordered number of dowels in the longitudinal direction, parallel to the subgrade, at 305 mm center-to-center spacing and at one-half the height of the designed concrete pavement thickness.
g. Dowels to be arc or resistance welded to the basket at alternate ends. h. Basket assembly to be constructed with a wire of 7.77 mm minimum diameter.
Basket Assembly Anchor Pin Requirements: i. j. Two anchor pins per 900 mm length of basket assembly. Anchor pins to be 125 mm minimum to 140 mm maximum constructed to insure penetration into the granular base.