Escolar Documentos
Profissional Documentos
Cultura Documentos
1-3
CCNP: Building Scalable Internetworks v5.0 Case Study 3 OSPF Five Routers Copyright 2006, Cisco Systems, Inc
Instructions Plan, design, and implement the International Travel Agency (ITA) network shown in the diagram and described below. Verify that all configurations are operational and functioning according to the guidelines. Scenario The ITA needs its core network set up for OSPF with the following specifications. Use the addressing scheme shown in the diagram.
2-3
Configure the OSPF backbone area on the Ethernet connection between R1 and R5. Configure the Frame Relay subnet as a point-to-multipoint network in area 100. Configure R2s loopback interfaces to be in area 200. Summarize this area with the most efficient summary. Configure the Ethernet connection between R3 and R4 to be in area 300. Add the loopback on R3 to area 300. Make area 300 a totally NSSA area.
Copyright 2006, Cisco Systems, Inc
CCNP: Building Scalable Internetworks v5.0 Case Study 3 - OSPF Five Routers
Redistribute the loopback networks on R4 that do not belong in any OSPF area. Create virtual links as necessary for full connectivity. Make sure that all loopback interfaces get advertised with the correct subnet mask.
3-3
CCNP: Building Scalable Internetworks v5.0 Case Study 3 - OSPF Five Routers