Escolar Documentos
Profissional Documentos
Cultura Documentos
Venkatesh
2012-2013
Presented By:Rahul Agarwal(EC/09/108) Suresh Sharma(EC/09/73) Rahul Garg(EC/09/58) Rahul Pipalwa(EC/09/40) Rishabh Kachhwaha(EC/09/117)
Introduction
Block Diagram & Circuit Diagram Components & Software Tool Feasibility Application & Purpose
Cell phone based voting machine is capable of saving considerable printing stationery and transport of large volumes of electoral material. It is easy to transport, store, and maintain.
In this project user can dial the specific number from any
land line or mobile phone to cast his vote.
5
MOBILE
LCD
GSM MODEM
Microcontroller
KEY
SERIAL INTERFACE
Gsm modem
ATmega32 Max 232 IC. Voltage regulator 7805. LCD
11
MAX 232
The MAX232 is an integrated circuit that converts signals from an RS-232 serial port to signals suitable for use in TTL compatible digital logic circuits. The MAX232 is a dual driver/receiver and typically converts the RX, TX, CTS and RTS signals. The drivers provide RS-232 voltage level outputs (approx. 7.5 V) from a single + 5 V supply via on-chip charge pumps and external capacitors
12
13
Feasibility:
This project is very feasible as it reduces the required time for voting. Provided the base data for scrutiny work on the day after the poll, as per ECI guideline Preserving data for analysis and future use Reports are collected directly from the Polling Stations to the State Head quarter through SMS message avoiding any time delay and increasing the accuracy.
14
The EVM system is a longtime-consuming process and very much prone to errors.
16
17
Democracy: All and only the authorised voters can vote,and each eligible voter can vote no more than once. Voters can also choose not to vote. Privacy: All votes remain secret while voting takes place and each individual vote cannot be linked by any individual or authority to the voter who casts it. Accuracy: The voting result accurately reflects voterschoices. In this case, no vote can be altered, duplicated or eliminated without being detected. Fairness: No partial result is available before the final result comes out.
18
Following distribution of work has been decided among group members: Rahul Agarwal : Coding , circuitry ,PCB design &
documentation.
Suresh Sharma : circuitry , components simulation, PCB design, documentation . Rahul Garg : documentation, PCB design . Rahul Pipalwa : PCB design ,component simulation.
http://www.8051projects.info
http://ece-projects.blogspot.in/p/main-projects.html
SMS based systems for monitoring of Polling Stations(praposal):By Sanjeev Ranjan,(Chief Electoral Officer, Tripura). http://www.codeproject.com
20