Escolar Documentos
Profissional Documentos
Cultura Documentos
NORMAPLAST
Strength
139
Plastic Products
NORMAPLAST
Plastic Products
140
2. Hose connectors With these NORMAPLAST SV connectors without thread hoses are connected quickly and easily with one another by just pushing the hose onto the connectors. The ribbed surface of the push-on spigots ensures that the hoses are tight-fit after assembly. The NORMAPLAST SV hose connectors are made of ecrucoloured POM (acetalcopolymerisat); other materials are available on request.
3. Compression The NORMAPLAST SV threaded connectors feature on one end a metric thread and on the other end one or two pipe unions. These compression connectors are made of black polyamide 6 with 30 % glass-fibre reinforcement.
4. Push-on connectors These NORMAPLAST SV parts are used for connecting plastic pipes made of PA6 or PA12. With these connectors safe connections can be achieved even without the use of additional hose clips. The push-on connectors are made of black polyamide 6 or polyamide 12 containing 30 % glass fibre reinforcement. The connectors can be supplied with O-rings on request.
NORMAPLAST
141
Plastic Products
NORMAPLAST
Plastic Products
142
0 = No statement available / no declaration possible 1 = Very stable / applicable (Change in dimensions: none or negligible and reversible; no damage also after long periods of time)
2 = Very stable / applicable (Change in dimensions: none or negligible and reversible after a short period of time; slightly changed dimensions, possibly irreversible changes in the material characteristics after a longer period of time) 3 = Conditionally applicable (Change in dimensions: considerable changes; possibly irreversible changes in the material characteristics after a longer period of time) 4 = Not stable / not applicable (soluble or extremely affected after a short period of time) (*) Moisture expansion
The details given in this brochure are based on tests carried out by the granulate manufacturer. They are given as guidelines for our customers but cannot be applied to cases where our customers expect these products to meet requirements not covered by testing. In such cases customers must consult us in advance. Our customers must conduct their own tests to ensure that NORMAPLAST plastic hose connectors are suitable for their intended
purpose. We would be pleased to provide help and advice in any way. Liability is strictly limited to our general terms and conditions of sale. Custom versions will be available if a sufficiently large quantity is ordered. Before use as a safety component, please consult the manufacturer. We reserve the right to make technical changes.
NORMAPLAST
Used as a hose connector Used as a pipe connector 143
Plastic Products
Description GES 3 / M 5 GES 4 / M 8 x 1 GES 4 / M 8 x 1.25 GES 4 / M 10 x 1 GES 4 / M 12 x 1.5 GES 4 / M 14 x 1.5 GES 4 / R 1/8 GES 4 / R 1/4 GES 4 / 1/8 NPT GES 4 / 1/4 NPT GES 5 / M 12 x 1.5 GES 5 / M 14 x 1.5 GES 5 / R 1/4 GES 5 / R 1/4 NPT GES 6 / M 10 x 1 GES 6 / M 12 x 1.5 GES 6 / M 14 x 1.5 GES 6 / R 1/8 GES 6 / R 1/4 GES 6 / R 3/8 GES 6 / 1/8 NPT GES 6 / 1/4 NPT GES 8 / M 10 x 1 GES 8 / M 12 x 1.5 GES 8 / M 14 x 1.5 GES 8 / M 18 x 1.5 GES 8 / M 22 x 1.5 GES 8 / R 1/8 GES 8 / R 1/4 GES 8 / R 3/8 GES 8 / R 1/2 GES 8 / 1/4 NPT GES 10 / M 12 x 1.5 GES 10 / M 14 x 1.5 GES 10 / M 16 x 1.5 GES 10 / R 1/4
Packaging PU 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
D1 3 4 4 4 4 4 4 4 4 4 5 5 5 5 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 10 10 10 10
D2 M5 M 8 x 1 keg M 8 x 1.25 keg M 10 x 1 keg M 12 x 1.5 keg M 14 x 1.5 keg R 1/8 keg R 1/4 keg 1/8 NPT 1/4 NPT M 12 x 1.5 keg M 14 x 1.5 keg R 1/4 keg 1/4 NPT M 10 x 1 keg M 12 x 1.5 keg M 14 x 1.5 keg R 1/8 keg R 1/4 keg R 3/8 keg 1/8 NPT 1/4 NPT M 10 x 1 keg M 12 x 1.5 keg M 14 x 1.5 keg M 18 x 1.5 keg M 22 x 1.5 keg R 1/8 keg R 1/4 keg R 3/8 keg R 1/2 keg 1/4 NPT M 12 x 1.5 keg M 14 x 1.5 keg M 16 x 1.5 keg R 1/4 keg
D3 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3 3 3 3 4 4 4 4 4 4 4 4 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 7 7 7 7
L1~ 19.5 27 27 27 32 32 27 32 29 35 36 36 36 39 32.5 37.5 36.5 32.5 37.5 39 34.5 40.5 38 41 41 49 49 38 41 41 49 44 43.5 43.5 43.5 43.5
SW 6 10 10 10 14 14 10 14 10 14 14 14 14 14 10 14 14 10 14 17 10 14 14 14 14 22 22 14 14 17 22 14 14 14 17 14
Material Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide Polyamide
NORMAPLAST
Plastic Products
All dimensions in mm. Please refer to the table on Page 163 for further information.
144
All dimensions in mm. Please refer to the table on Page 163 for further information.
NORMAPLAST
All dimensions in mm. Please refer to the table on Page 163 for further information.
145
Plastic Products
All dimensions in mm. Please refer to the table on Page 163 for further information.
NORMAPLAST
Plastic Products
146
NORMAPLAST
All dimensions in mm. Please refer to the table on Page 163 for further information.
147
Plastic Products
Description GS 3 GS 4 GS 5 GS 6 GS 8 GS 10 GS 12 GS 13 GS 14 GS 16 GS 19 GS 25
Packaging PU 100 100 100 100 100 100 100 100 100 100 100 100
D1 3 4 5 6 8 10 12 13 14 16 19 25
L1~ 25 35 45 49 56 63 66.5 73 79 75 76 95
Material Acetalcopolymerisat (POM) Acetalcopolymerisat (POM) Acetalcopolymerisat (POM) Acetalcopolymerisat (POM) Acetalcopolymerisat (POM) Acetalcopolymerisat (POM) Acetalcopolymerisat (POM) Acetalcopolymerisat (POM) Acetalcopolymerisat (POM Acetalcopolymerisat (POM) Acetalcopolymerisat (POM) Acetalcopolymerisat (POM)
All dimensions in mm. Please refer to the table on Page 163 for further information.
NORMAPLAST
Description
Plastic Products
Packaging PU 100 100 100 100 100 100 100 100 100
D1 4 5 6 8 8 10 10 12 12
D3 3 3 4 4 6 6 8 8 10
Material Acetalcopolymerisat (POM) Acetalcopolymerisat (POM) Acetalcopolymerisat (POM) Acetalcopolymerisat (POM) Acetalcopolymerisat (POM) Acetalcopolymerisat (POM) Acetalcopolymerisat (POM) Acetalcopolymerisat (POM) Acetalcopolymerisat (POM)
All dimensions in mm. Please refer to the table on Page 163 for further information.
148
All dimensions in mm. Please refer to the table on Page 163 for further information.
All dimensions in mm. Please refer to the table on Page 163 for further information.
149
Plastic Products
KS 4 KS 5 KS 6 KS 12
4 5 6 12
2.9 3 4 8.6
39 48 48 69
NORMAPLAST
Description
D1
D2
L1~
Material
All dimensions in mm. Please refer to the table on Page 163 for further information.
NORMAPLAST
Plastic Products
All dimensions in mm. Please refer to the table on Page 163 for further information.
150
All dimensions in mm. Please refer to the table on Page 163 for further information.
NORMAPLAST
All dimensions in mm. Please refer to the table on Page 163 for further information.
151
Plastic Products
All dimensions in mm. Please refer to the table on Page 163 for further information.
NORMAPLAST
D2 4.75 6.8 8 12 16
L1~ 66 58 60 72 65
L3~ 28 29 30 36 32.5
Material Polyamide 6 or 12; 30% GF* Polyamide 6 or 12; 30% GF* Polyamide 6 or 12; 30% GF* Polyamide 6 or 12; 30% GF* Polyamide 6 or 12; 30% GF*
152
All dimensions in mm. Please refer to the table on Page 163 for further information.
Packaging IC 1000
D1 8.4
D2 5.8
L1~ 50.5
NORMAPLAST
153
Plastic Products
All dimensions in mm. Please refer to the table on Page 163 for further information.
NORMAPLAST
Plastic Products
L1~ 14 15 14 14 15 14
L2~ 21 23 21 21 23 21
SW 13 17 13 13 17 13
Material Polyamide 6; 30% GF* Polyamide 6; 30% GF* Polyamide 6; 30% GF* Polyamide 6; 30% GF* Polyamide 6; 30% GF* Polyamide 6; 30% GF*
154
All dimensions in mm. Please refer to the table on Page 163 for further information.
ET T compression connectors
Description ET 6 x 1 - R 1/8 ET 6 x 1 - R 1/4 ET 6 x 1 - M 10 x 1 ET 8 x 1 - R 1/8 ET 8 x 1 - R 1/4 ET 8 x 1 - M 10 x 1
* GF = glass fibre content All dimensions in mm. Please refer to the table on Page 163 for further information.
D2 R 1/8 keg R 1/4 keg M 10 x 1 keg R 1/8 keg R 1/4 keg M 10 x 1 keg
L1~ 19 23 19 19 23 19
L2~ 23 23 23 23 23 23
Material Polyamide 6; 30% GF* Polyamide 6; 30% GF* Polyamide 6; 30% GF* Polyamide 6; 30% GF* Polyamide 6; 30% GF* Polyamide 6; 30% GF*
NORMAPLAST
155
Plastic Products
All dimensions in mm. Please refer to the table on Page 163 for further information.
NORMAPLAST
Plastic Products
VT 6 x 1 VT 8 x 1 VTR 6 x 1 - 8 x 1 - 6 x 1 VTR 8 x 1 - 6 x 1 - 8 x 1
All dimensions in mm. Please refer to the table on Page 163 for further information.
156
All dimensions in mm. Please refer to the table on Page 163 for further information.
Assembly Instructions
Pipe size: Outside - x wall thickness Push the cap onto the pipe, push the pipe onto the sleeve up to the stop. Tighten the cap on the buttress thread up to the stop! (If necessary, use commercially available pliers). The cap is also available as piece part. After tightening the cap Cap Pipe Cap Pipe
Sleeve
Depending on the material used NORMAPLAST hose and pipe connectors are the ideal connectors for lines transporting Water Air Oil Fuel For details please refer to the table Product and Material Properties on page 142.
157
Plastic Products
Applications
NORMAPLAST