Escolar Documentos
Profissional Documentos
Cultura Documentos
Alcatel-Lucent
1646 Synchronous Multiplexer Compact (SMC) | Release
2.1
User Provisioning Guide
3KC18036ABABTQZZA
Issue 1
July 2011
Legal notice
Legal notice
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective
owners.
The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
Copyright 2011 Alcatel-Lucent. All rights reserved.
Notice
The information in this document is subject to change without notice. Although every effort has been made to make this document as accurate, complete, and
clear as possible, Alcatel-Lucent and its predecessors assume no responsibility for any errors that appear in this document.
Security Statement
In rare instances, unauthorized individuals make connections to the telecommunications network. In such an event, applicable tariffs require that the
customer pay all network charges for traffic. Alcatel-Lucent and its predecessors cannot be responsible for such charges and will not make any allowance or
give any credit for charges that result from unauthorized access.
Limited warranty
Alcatel-Lucent provides a limited warranty for this product. For more information, consult your local Alcatel-Lucent customer support team.
Ordering information
To order more copies of this document or other Alcatel-Lucent documents, please access the Online Customer Support (OLCS) (https://support.lucent.com).
Information product support
To comment on this information product, go to the Online Comment Form (http://www.alcatel-lucent-info.com/comments/enus/) or email your comments to
the Comments Hotline (comments@alcatel-lucent.com).
Contents
...................................................................................................................................................................... xxi
xxi
xxi
How to use this document ....................................................................................................................................................... xxi
Signal words
............................................................................................................................................................................... xxii
xxii
Conventions used
.................................................................................................................................................................... xxiii
xxiii
Related information
................................................................................................................................................................ xxiii
xxiii
xxiv
Technical support ..................................................................................................................................................................... xxiv
xxiv
How to order .............................................................................................................................................................................. xxiv
xxiv
How to comment ...................................................................................................................................................................... xxiv
1
Getting Started
Overview ...................................................................................................................................................................................... 1-1
1-1
1-1
ZIC Functionality ...................................................................................................................................................................... 1-1
System Management
Overview ...................................................................................................................................................................................... 2-1
2-1
2-2
ZIC overview .............................................................................................................................................................................. 2-2
2-4
Procedure 2-1: Establish ZIC session ................................................................................................................................ 2-4
ZIC icons and symbols
........................................................................................................................................................... 2-6
2-6
2-7
Menus ............................................................................................................................................................................................ 2-7
Equipment menu
....................................................................................................................................................................... 2-8
2-8
Connection menu
...................................................................................................................................................................... 2-8
2-8
2-9
Data menu .................................................................................................................................................................................... 2-9
....................................................................................................................................................................................................................................
1646 SMC
iii
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Contents
....................................................................................................................................................................................................................................
...................................................................................................................................................................... 2-11
2-11
2-11
Synchonization menu ............................................................................................................................................................ 2-11
2-12
System Management menu ................................................................................................................................................. 2-12
2-12
Security menu .......................................................................................................................................................................... 2-12
2-13
Tools menu ................................................................................................................................................................................ 2-13
2-13
Help menu ................................................................................................................................................................................. 2-13
3
Equipment management
Overview ...................................................................................................................................................................................... 3-1
3-1
3-1
Procedure 3-1: Configure a board ....................................................................................................................................... 3-1
3-5
Procedure 3-2: Configure a port .......................................................................................................................................... 3-5
3-12
Procedure 3-3: Housekeeping support ............................................................................................................................ 3-12
Ethernet Functions
Overview ...................................................................................................................................................................................... 4-1
4-1
Procedure 4-1: Traffic descriptor
........................................................................................................................................ 4-2
4-2
4-5
Procedure 4-2: Resource Availability ................................................................................................................................ 4-5
4-8
Procedure 4-3: MAC Access Control List management ............................................................................................. 4-8
4-10
Procedure 4-4: VLAN Profile ............................................................................................................................................ 4-10
4-11
Procedure 4-5: Create color profile .................................................................................................................................. 4-11
4-13
Procedure 4-6: Bridge configuration ............................................................................................................................... 4-13
Procedure 4-7: IGMP management
................................................................................................................................. 4-14
4-14
4-16
Procedure 4-8: Create ASAP list ....................................................................................................................................... 4-16
Procedure 4-9: Global setting
............................................................................................................................................ 4-18
4-18
.............................................................................................................. 4-19
4-19
....................................................................................................... 4-20
4-20
............................................................................................................................................. 4-23
4-23
4-25
Procedure 4-13: EFM tool ................................................................................................................................................... 4-25
Procedure 4-14: Configure EFM tool
............................................................................................................................. 4-26
4-26
....................................................................................................................................................................................................................................
1646 SMC
iv
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Contents
....................................................................................................................................................................................................................................
.......................................................................................................................... 4-30
4-30
..................................................................................................... 4-31
4-31
................................................................................................. 4-32
4-32
4-34
Procedure 4-20: Ethernet P2P XC .................................................................................................................................... 4-34
5
Synchronization
Overview ...................................................................................................................................................................................... 5-1
5-1
5-1
Synchronization menu ............................................................................................................................................................. 5-1
5-2
Procedure 5-1: Modify BITS-0 ............................................................................................................................................ 5-2
5-3
Procedure 5-2: Modify BITS-OUT .................................................................................................................................... 5-3
5-5
Procedure 5-3: Administer system timing BITS ............................................................................................................ 5-5
Synchronization outgoing
................................................................................................................................................... 5-12
5-12
Alarm Management
Overview ...................................................................................................................................................................................... 6-1
6-1
Procedure 6-1: Provision alarm severity assignment profiles
.................................................................................. 6-1
6-1
6-4
Procedure 6-2: ALM cutoff ................................................................................................................................................... 6-4
6-5
Procedure 6-3: ALM resynch. .............................................................................................................................................. 6-5
Procedure 6-4: Condition log
7
............................................................................................................................................... 6-6
6-6
Security
Overview ...................................................................................................................................................................................... 7-1
7-1
Procedure 7-1: Change user password
............................................................................................................................. 7-2
7-2
7-2
Procedure 7-2: Retrieve user information ........................................................................................................................ 7-2
7-4
Procedure 7-3: Create user account .................................................................................................................................... 7-4
Procedure 7-4: Change user account
................................................................................................................................. 7-5
7-5
7-8
Procedure 7-5: Modify account default settings ............................................................................................................ 7-8
7-9
Procedure 7-6: View current sessions ................................................................................................................................ 7-9
7-10
Procedure 7-7: Modify command privileges ................................................................................................................ 7-10
....................................................................................................................................................................................................................................
1646 SMC
v
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Contents
....................................................................................................................................................................................................................................
............................................................................................. 7-16
7-16
................................................................................................................................... 8-2
8-2
............................................................................................................................... 8-3
8-3
8-4
Procedure 8-3: Retrieve software version ........................................................................................................................ 8-4
8-6
Procedure 8-4: Search VCn cross-connection ................................................................................................................ 8-6
Procedure 8-5: Initialize and Upgrade with a new release
........................................................................................ 8-9
8-9
8-10
Procedure 8-6: DB management remote file copy ..................................................................................................... 8-10
8-13
Procedure 8-7: DB management cancel remote file copy ....................................................................................... 8-13
8-14
Procedure 8-8: Network Element management ........................................................................................................... 8-14
8-15
Procedure 8-9: Change site identifier .............................................................................................................................. 8-15
8-16
Procedure 8-10: LAC Management ................................................................................................................................. 8-16
8-18
Procedure 8-11: MAC File Collection ............................................................................................................................ 8-18
8-19
Procedure 8-12: Administer NTP ..................................................................................................................................... 8-19
8-22
Procedure 8-13: Network IF ............................................................................................................................................... 8-22
Procedure 8-14: Create XC Overhead
Procedure 8-15: IP Address
............................................................................................................................ 8-24
8-24
................................................................................................................................................ 8-26
8-26
8-27
Procedure 8-16: Configure IP route ................................................................................................................................. 8-27
Procedure 8-17: OSI management
................................................................................................................................... 8-29
8-29
8-31
Procedure 8-18: Create linear MSP ................................................................................................................................. 8-31
8-33
Procedure 8-19: Create MS-SPRing ................................................................................................................................ 8-33
8-35
Procedure 8-20: LAG management ................................................................................................................................. 8-35
Procedure 8-21: Remove LAG member
........................................................................................................................ 8-40
8-40
............................................................................................................. 8-43
8-43
8-45
Procedure 8-23: Create IP route ........................................................................................................................................ 8-45
8-47
Procedure 8-24: Create IP tunnel ...................................................................................................................................... 8-47
....................................................................................................................................................................................................................................
1646 SMC
vi
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Contents
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
vii
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Contents
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
viii
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
List of tables
........................................................................................................................ xxii
3-1
3-2
3-3
3-4
4-1
4-2
4-3
4-4
4-5
4-6
4-7
4-8
4-9
4-10
4-11
4-12
4-13
4-14
4-15
4-16
6-1
6-6
Alarm log parameters ............................................................................................................................................... 6-6
..................................................................................................................... 3-3
............................................................................................................................................. 3-7
3-7
......................................................................................................... 3-13
.......................................................................................................................................... 4-4
4-4
........................................................................................................... 4-7
............................................................................................ 4-9
...................................................................................................... 4-11
........................................................................................................................................ 4-17
.................................................................................... 4-22
............................................................................................................................ 4-24
...................................................................................................... 4-32
............................................................................................................ 4-35
....................................................................................................................................................................................................................................
1646 SMC
ix
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
List of tables
....................................................................................................................................................................................................................................
7-1
................................................................................................................ 7-4
7-2
7-3
Current sessions
8-1
Connection panel
8-2
8-3
8-4
8-5
8-6
8-7
8-8
8-26
Filter by parameters ................................................................................................................................................ 8-26
8-9
8-10
8-11
8-12
......................................................................................................................... 8-32
8-13
......................................................................................................................... 8-34
8-14
8-15
8-16
8-17
8-46
IP routing parameters ............................................................................................................................................. 8-46
8-18
NE IP tunnel parameters
8-19
...................................................................................................................... 7-6
....................................................................................................................................................... 7-10
7-10
....................................................................................................................................................... 8-6
8-6
......................................................................................................................................... 8-8
8-8
................................................................................................................... 8-12
............................................................................................ 8-14
................................................................................................................................... 8-17
8-17
.......................................................................................................... 8-19
......................................................................................................................... 8-23
............................................................................................................................... 8-28
................................................................................................................................... 8-30
............................................................................................................................. 8-31
............................................................................................................. 8-44
....................................................................................................................................... 8-48
....................................................................................................................................................................................................................................
1646 SMC
x
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
List of figures
2-1
................................................................................................................................... 2-2
2-2
2-3
ZIC main window ...................................................................................................................................................... 2-3
2-3
2-4
ZIC launcher ................................................................................................................................................................ 2-4
2-4
2-5
2-6
Equipment menu
........................................................................................................................................................ 2-8
2-8
2-7
Connection menu
....................................................................................................................................................... 2-8
2-8
2-8
Data menu
2-9
Communication menu
2-10
2-10
Alarms menu ............................................................................................................................................................. 2-10
2-11
Protection menu
2-12
2-11
Synchonization menu ............................................................................................................................................. 2-11
2-13
2-14
2-12
Security menu ........................................................................................................................................................... 2-12
2-15
Tools menu
3-1
3-2
3-3
Rack xx > Shelf xx > Board xx > Module xx > Port .................................................................................... 3-6
3-4
3-9
Bridge panel ................................................................................................................................................................. 3-9
3-5
3-6
3-7
3-11
History Data Tx panel ............................................................................................................................................ 3-11
........................................................................................................................ 2-5
............................................................................................................................................ 2-6
.................................................................................................................................................................... 2-9
2-9
........................................................................................................................................... 2-10
2-10
....................................................................................................................................................... 2-11
2-11
................................................................................................................................................................ 2-13
2-13
............................................................................................................................ 3-2
................................................................................................. 3-4
.......................................................................................................................... 3-10
........................................................................................................................................... 3-11
3-11
....................................................................................................................................................................................................................................
1646 SMC
xi
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
List of figures
....................................................................................................................................................................................................................................
3-8
3-9
3-10
Alarms report
3-11
4-1
4-2
4-3
4-4
4-5
4-6
VLAN Profile
4-7
4-12
Color profile .............................................................................................................................................................. 4-12
4-8
4-9
4-16
ASAP window .......................................................................................................................................................... 4-16
4-10
4-11
4-17
New ASAP ................................................................................................................................................................. 4-17
4-12
4-13
4-14
4-15
4-16
4-17
EFM tool
.................................................................................................................................................................... 4-26
4-26
4-18
EFM tool
.................................................................................................................................................................... 4-27
4-27
4-19
VLAN Registration
................................................................................................................................................ 4-28
4-28
4-20
VLAN Registration
................................................................................................................................................ 4-29
4-29
4-21
4-30
Modify VLAN .......................................................................................................................................................... 4-30
4-22
4-23
4-24
4-32
Static Unicast Filtering .......................................................................................................................................... 4-32
4-25
............................................................................................................................................ 3-13
3-13
............................................................................................................................................................ 3-14
3-14
.......................................................................................................................... 3-15
........................................................................................................................................... 4-2
4-2
................................................................................................................................ 4-6
.......................................................................................................................... 4-8
................................................................................................................... 4-9
.................................................................................. 4-10
........................................................................................................................................................... 4-11
4-11
.................................................................................................................................. 4-14
................................................................................................................................................... 4-16
4-16
........................................................................................................... 4-22
................................................................................................................................................... 4-24
4-24
.................................................................................................................................. 4-31
...................................................................................................................................... 4-33
4-33
....................................................................................................................................................................................................................................
1646 SMC
xii
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
List of figures
....................................................................................................................................................................................................................................
4-26
P2P Panel
................................................................................................................................................................... 4-34
4-34
4-27
5-1
5-2
Modify BITS 0
5-3
5-4
5-5
5-6
Synchronization panel .............................................................................................................................................. 5-6
5-6
5-7
5-8
........................................................................................................ 5-9
5-9
...................................................................................................... 5-10
5-10
5-11
5-12
5-13
................................................................................... 5-13
5-14
................................................................................... 5-14
6-1
ASAP profile
6-2
6-3
Alarm cutoff
6-4
Refresh alarms
6-5
6-6
Alarm log ...................................................................................................................................................................... 6-6
7-1
7-2
User information
7-3
7-4
7-5
7-6
Current sessions
7-7
7-8
................................................................................................................................... 4-35
........................................................................................................................................... 5-2
5-2
........................................................................................................................................................... 5-3
5-3
........................................................................................................................................ 5-4
............................................................................................................................. 5-8
......................................................................................................... 5-11
.................................................................................................................... 5-12
............................................................................................................................................................... 6-2
6-2
......................................................................................................................................................... 6-3
6-3
................................................................................................................................................................ 6-4
6-4
............................................................................................................................................................ 6-5
6-5
............................................................................................................................................. 7-2
........................................................................................................................................................ 7-3
7-3
................................................................................................................................................... 7-4
7-4
............................................................................................................... 7-9
....................................................................................................................................................... 7-10
7-10
.................................................................................................................... 7-11
....................................................................................................................................................................................................................................
1646 SMC
xiii
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
List of figures
....................................................................................................................................................................................................................................
7-9
.................................................................................................................................................... 7-13
7-13
7-10
7-11
7-12
8-1
ZIC loading
8-2
8-4
Logout message screen ............................................................................................................................................ 8-4
8-3
About window
8-4
TDM search
8-5
8-6
8-7
8-9
XC mapping ................................................................................................................................................................. 8-9
8-8
8-9
8-10
System configuration
8-11
8-16
Set site identifier ...................................................................................................................................................... 8-16
8-12
8-13
8-14
8-15
8-16
8-17
8-23
DCC Channel ............................................................................................................................................................ 8-23
8-18
8-19
8-20
8-21
8-26
DCC Channel ............................................................................................................................................................ 8-26
8-22
8-27
IP route creation ....................................................................................................................................................... 8-27
8-23
8-24
OSI Area
8-25
OS Address
............................................................................................................................................. 7-15
7-15
................................................................................................... 7-17
.................................................................................................................................................................. 8-3
8-3
............................................................................................................................................................ 8-5
8-5
................................................................................................................................................................. 8-6
8-6
.................................................................................................................................. 8-7
.......................................................................................................................................... 8-11
8-11
................................................................................................................... 8-13
............................................................................................................................................. 8-15
8-15
........................................................................................................................... 8-17
............................................................................................................................................. 8-18
8-18
................................................................................. 8-21
.................................................................................. 8-25
................................................................................................................................................ 8-28
8-28
..................................................................................................................................................................... 8-29
8-29
................................................................................................................................................................ 8-30
8-30
....................................................................................................................................................................................................................................
1646 SMC
xiv
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
List of figures
....................................................................................................................................................................................................................................
8-26
Linear MSP
............................................................................................................................................................... 8-31
8-31
8-27
8-28
8-29
8-30
8-31
.................................................................................................................................... 8-40
8-32
..................................................................................................................................... 8-41
8-33
Configure LAG
8-34
8-35
8-36
8-37
System Information
8-38
IP Routing Configuration
8-39
8-40
8-50
Create FTP server .................................................................................................................................................... 8-50
................................................................................. 8-34
........................................................................................................................... 8-36
........................................................................................................................................................ 8-42
8-42
................................................................................................................. 8-42
............................................................................................................................................. 8-43
................................................................................................................................................ 8-44
8-44
..................................................................................................................................... 8-45
................................................................................................................................ 8-48
....................................................................................................................................................................................................................................
1646 SMC
xv
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
List of figures
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
xvi
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
List of procedures
System Management
2-1
............................................................................................................................................... 2-4
2-4
Equipment management
3-1
Configure a board
3-2
Configure a port
3-3
Housekeeping support
...................................................................................................................................................... 3-1
3-1
......................................................................................................................................................... 3-5
3-5
........................................................................................................................................... 3-12
Ethernet Functions
4-1
Traffic descriptor
4-2
Resource Availability
4-3
4-4
VLAN Profile
4-5
4-6
Bridge configuration
4-7
4-14
IGMP management ................................................................................................................................................. 4-14
4-8
4-9
4-18
Global setting ............................................................................................................................................................ 4-18
4-10
4-11
4-12
Create MEP
4-13
EFM tool
4-14
4-15
4-28
Create VLAN ............................................................................................................................................................ 4-28
....................................................................................................................................................... 4-2
4-2
............................................................................................................................................... 4-5
4-5
............................................................................................................ 4-8
........................................................................................................................................................... 4-10
4-10
................................................................................................................................................. 4-11
4-11
.............................................................................................................................................. 4-13
4-13
...................................................................................................................................................... 4-16
4-16
................................................................................................................................ 4-19
......................................................................................................................... 4-20
............................................................................................................................................................... 4-23
4-23
.................................................................................................................................................................... 4-25
4-25
............................................................................................................................................... 4-26
4-26
....................................................................................................................................................................................................................................
1646 SMC
xvii
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
List of procedures
....................................................................................................................................................................................................................................
4-16
4-17
Dynamic filtering DB
4-18
4-19
4-20
4-34
Ethernet P2P XC ...................................................................................................................................................... 4-34
............................................................................................................................................ 4-30
4-30
....................................................................................................................... 4-31
................................................................................................................... 4-32
Synchronization
5-1
Modify BITS-0
5-2
Modify BITS-OUT
5-3
........................................................................................................................................................... 5-2
5-2
................................................................................................................................................... 5-3
5-3
Alarm Management
6-1
6-2
ALM cutoff
6-3
ALM resynch.
6-4
6-6
Condition log ............................................................................................................................................................... 6-6
.................................................................................................................................................................. 6-4
6-4
............................................................................................................................................................. 6-5
6-5
Security
7-1
7-2
7-3
7-4
7-5
Change user account ................................................................................................................................................. 7-5
7-5
7-6
7-7
7-8
Manage audit
7-9
Log settings
7-10
............................................................................................................................................ 7-2
....................................................................................................................................... 7-2
7-2
................................................................................................................................................... 7-4
7-4
........................................................................................................................... 7-8
............................................................................................................................................... 7-9
7-9
............................................................................................................................... 7-10
............................................................................................................................................................ 7-12
7-12
............................................................................................................................................................... 7-15
7-15
............................................................................................................... 7-16
8-2
8-3
Log out of the system ............................................................................................................................................... 8-3
....................................................................................................................................................................................................................................
1646 SMC
xviii
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
List of procedures
....................................................................................................................................................................................................................................
8-3
....................................................................................................................................... 8-4
8-4
8-4
8-5
8-6
8-7
8-8
8-9
8-10
8-16
LAC Management ................................................................................................................................................... 8-16
8-11
8-12
8-19
Administer NTP ....................................................................................................................................................... 8-19
8-13
8-22
Network IF ................................................................................................................................................................. 8-22
8-14
Create XC Overhead
8-15
IP Address
8-16
8-27
Configure IP route ................................................................................................................................................... 8-27
8-17
OSI management
8-18
................................................................................................................................................... 8-31
8-31
8-19
Create MS-SPRing
................................................................................................................................................. 8-33
8-33
8-20
8-35
LAG management ................................................................................................................................................... 8-35
8-21
8-22
8-23
8-45
Create IP route .......................................................................................................................................................... 8-45
8-24
8-47
Create IP tunnel ........................................................................................................................................................ 8-47
8-25
NE TL1 Parameter
8-26
............................................................................................................................... 8-6
.................................................................................................................... 8-10
...................................................................................................... 8-13
.......................................................................................................................... 8-14
............................................................................................................................................. 8-15
8-15
............................................................................................................................................. 8-18
8-18
.............................................................................................................................................. 8-24
8-24
.................................................................................................................................................................. 8-26
8-26
..................................................................................................................................................... 8-29
8-29
.......................................................................................................................................... 8-40
............................................................................................................................... 8-43
.................................................................................................................................................. 8-49
8-49
....................................................................................................................................................................................................................................
1646 SMC
xix
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
List of procedures
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
xx
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Purpose
This User Provisioning Guide provides the following information about the
Alcatel-Lucent 1646 SMC, Release 2.1:
Accessing and logging into the Zero Installation Craft (ZIC) terminal
Intended audience
This Alcatel-Lucent 1646 SMC Release 2.1 User Provisioning Guide is intended
primarily for telecommunications technicians and communications network providers.
Procedural information in this document is intended primarily for maintenance, operation,
and provisioning personnel responsible for operating and maintaining the Alcatel-Lucent
1646 SMC.
How to use this document
This guide includes descriptive and procedural chapters with supporting information (for
example, safety instructions, glossary, and index). See the Contents section to locate
specific information.
Assumptions
This document assumes that users have an understanding of the following:
...................................................................................................................................................................................................................................
1646 SMC
xxi
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Chapter
Description
This chapter
Chapter 5, Synchronization
Chapter 7, Security
Glossary
Telecommunication terms
Abbreviations
Acronyms
Index
Signal words
The signal words that identify the hazard severity levels are shown in Table 1, Signal
words for hazard severity (p. xxii)
Table 1
Signal word
Meaning
DANGER
....................................................................................................................................................................................................................................
1646 SMC
xxii
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Table 1
(continued)
Signal word
Meaning
WARNING
CAUTION
NOTICE
See Alcatel-Lucent 1646 SMC R2.1 Safety Guide (3KC18041AAAATQZZA) for safety
related information.
Conventions used
Example:
Configuration -> Equipment
Related information
The following table lists the documents included in the documentation set:
Part Number
Title
Description
Provides information on
provisioning, configuration,
operation, performance
monitoring and maintenance
using the Zero Installation
Craft (ZIC) terminal.
Provides information on
product installation and
commissioning.
....................................................................................................................................................................................................................................
1646 SMC
xxiii
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Part Number
Title
Description
Provides information on
Fault Management, alarms
and clearance procedures.
Provides information on
provisioning, configuration,
operation, performance
monitoring and maintenance
using the TL1 interface in
the Zero Installation Craft
(ZIC) terminal Interface.
Technical support
For technical support, contact your local Alcatel-Lucent customer support team. See the
Alcatel-Lucent Support web site (http://www.alcatel-lucent.com/support/) for contact
information.
How to order
To order Alcatel-Lucent documents, contact your local sales representative or use Online
Customer Support (OLCS) (http://support.alcatel-lucent.com)
How to comment
To comment on this document, go to the Online Comment Form (http://infodoc.alcatellucent.com/comments/) or e-mail your comments to the Comments Hotline
(comments@alcatel-lucent.com).
....................................................................................................................................................................................................................................
1646 SMC
xxiv
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Getting Started
1
Overview
Purpose
This Chapter introduces the Zero Installation Craft (ZIC) terminal Alcatel-Lucent
software and the main functions of the ZIC Menu. The ZIC provides local management of
single network element, with an ITU compliant Information Model Interface that
manages the Network Element.
Contents
ZIC Functionality
1-1
ZIC Functionality
Purpose
The following is a listing of the functionality of the Zero Installation Craft terminal in
managing the NE.
System Management
System Overview
Hierarchical menu
System Functions
Provides a description of the presentation of the equipment and the hierarchical tree
structure.
Equipment/Board Management also provides information on:
...................................................................................................................................................................................................................................
1646 SMC
1-1
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Getting Started
ZIC Functionality
....................................................................................................................................................................................................................................
Remote Inventory
Port Management
Port Management permits configuration and viewing of transmission resources at the
port level. The following are the Port level configuration menu listing:
Automatic Laser Shutdown
MSP protection
Loopback management and configuration
Single fiber configuration
TP Frame Mode Configuration
Re-timing
Network Configuration
Provides descriptions of Ethernet related features and the detailed level provisioning
procedures for the same.
Synchronization
Provides a description and listing of the Alarms and the alarm management system.
Performance Management
....................................................................................................................................................................................................................................
1646 SMC
1-2
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Getting Started
ZIC Functionality
....................................................................................................................................................................................................................................
Provisioning
Data Communication
Alarms
Protection
Synchronization
System Management
Security
....................................................................................................................................................................................................................................
1646 SMC
1-3
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Getting Started
ZIC Functionality
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
1-4
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
System Management
2
Overview
Purpose
Provides a description of the Zero Installation Craft (ZIC) terminal system overview and
hierarchical menu.
Contents
ZIC overview
2-2
2-4
2-6
Menus
2-7
Equipment menu
2-8
Connection menu
2-8
Data menu
2-9
Communication menu
2-10
Alarms menu
2-10
Protection menu
2-11
Synchonization menu
2-11
2-12
Security menu
2-12
Tools menu
2-13
Help menu
2-13
...................................................................................................................................................................................................................................
1646 SMC
2-1
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
System Management
ZIC overview
....................................................................................................................................................................................................................................
ZIC overview
Overview
The Zero Installation Craft (ZIC) terminal is a project in charge of the local management
of single network elements, providing ITU-compliant Information Model Interface to the
Network Element.
The ZIC can be integrated to products in charge of the management of networks and
network elements. The Network Element (NE) provides the web server while the user
only needs to start a standard available web browser to access the ZIC application.
Figure 2-1 ZIC authentication window
The Authentication dialog window displays the product name and release number. It also
contains the following fields:
....................................................................................................................................................................................................................................
1646 SMC
2-2
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
System Management
ZIC overview
....................................................................................................................................................................................................................................
Starting from left to right, the Page header contains the company logo, the equipment
title, the user ID and the Logout hyperlink.
....................................................................................................................................................................................................................................
1646 SMC
2-3
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
System Management
....................................................................................................................................................................................................................................
Use this procedure to establish a Zero Installation Craft (ZIC) terminal session.
...................................................................................................................................................................................................
Start the Alcatel-Lucent ZIC Launcher. Add the NE's IP address as shown in the figure.
Figure 2-3 ZIC launcher
....................................................................................................................................................................................................................................
1646 SMC
2-4
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
System Management
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Start the Alcatel-Lucent ZIC Launcher. Load the NE's IP address as shown in Figure 2-3,
ZIC launcher (p. 2-4) and click Open.
...................................................................................................................................................................................................
The authentication dialog window opens as shown in Figure 2-1, ZIC authentication
window (p. 2-2).
....................................................................................................................................................................................................................................
1646 SMC
2-5
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
System Management
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
In the authentication dialog box enter the user name and password and click Login or
press the Enter key. The ZIC application opens and loads the NE information as shown in
Figure 2-2, ZIC main window (p. 2-3).
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
2-6
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
System Management
Menus
....................................................................................................................................................................................................................................
Menus
Description
This section describes an important aspect of the user interface. The user constantly has to
open Pages, select icons and navigate through the different functionalities of the Zero
Installation Craft (ZIC) terminal. A menu consists of a title, that usually identifies the
nature of the actions that can be undertaken, and a list of options associated with actions.
Menu types can be classified as:
Menu bars
Pull-down menus
Cascading menus
Pop-up menus
Menu bars
Menu bars present at the top of a page's browser (under the title of the page) and above
the client area. They appear automatically along with the page.
Pull down menu
A pull-down menu is pulled down from a menu item present in a menu bar. To open a
pull-down menu, click on the title of the menu you need to open with the "Select" mouse
button.
Note: A menu option followed by ... means that selecting this option opens another
view. For example the Open... or Save As... menu options in the File pull-down
menu.
Cascading menus
Cascading menus are derived from pull-down menus and represent additional options for
the pull-down menu item selected. Cascading menus are indicated if the > sign follows
an option in a pull-down menu.
To open a cascading menu, click on the menu option with the > sign in the pull-down
menu.
....................................................................................................................................................................................................................................
1646 SMC
2-7
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
System Management
Equipment menu
....................................................................................................................................................................................................................................
Equipment menu
This menu allows to manage the equipment configuration. The menu options are shown
in the following figure:
Figure 2-6 Equipment menu
Connection menu
The connection menu allows to manage (provisioning, service type etc.) the client/line
traffic. The menu options are shown in the following figure:
Figure 2-7 Connection menu
....................................................................................................................................................................................................................................
1646 SMC
2-8
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
System Management
Data menu
....................................................................................................................................................................................................................................
Data menu
The data menu allows to set the service for Data traffic. The menu options are shown in
the following figure:
Figure 2-8 Data menu
ASAP list - To show and manage the Alarm Severity Assignment Profile.
suboptions are:
Global Setting
....................................................................................................................................................................................................................................
1646 SMC
2-9
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
System Management
Communication menu
....................................................................................................................................................................................................................................
Communication menu
The communication menu allows to configure and set the external communication for NE
management interfaces. The menu options are shown in the following figure:
Figure 2-9 Communication menu
Alarms menu
The alarms menu allows to manage entities yield alarms when they malfunction. The
menu options are shown in the following figure:
Figure 2-10 Alarms menu
....................................................................................................................................................................................................................................
1646 SMC
2-10
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
System Management
Alarms menu
....................................................................................................................................................................................................................................
TCA Profile - Allows to configure and display of the active threshold crossing alarm
profile (TCA = Threshold Crossing Alarm).
ASAP Mng - Allows to configure and display the ASAP (Alarm Severity Assignment
Profile).
ALM CUTOFF - Allows to silence the office audible alarm indications.
ALM Resynch. - Allows to update the alarm database to the current alarm situation.
Condition Log - Allows to collect the alarm history report from the NE.
Protection menu
This menu allows the to manage the available protection systems. The menu options are
shown in the following figure:
Figure 2-11 Protection menu
Synchonization menu
This menu allows the operator to manage the ports dedicated to BITS (Building
Integrated Timing Source) facilities for clock distribution purposes. A BITS output
reference is a DS1 signal. The menu options are shown in the following figure:
Figure 2-12 Synchonization menu
....................................................................................................................................................................................................................................
1646 SMC
2-11
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
System Management
....................................................................................................................................................................................................................................
Security menu
This menu contains the following sub-menu options for user and administrative users.
Figure 2-14 Security menu
....................................................................................................................................................................................................................................
1646 SMC
2-12
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
System Management
Tools menu
....................................................................................................................................................................................................................................
Tools menu
This menu allows the operator to open a Telnet console for TL1 commands. The menu
options are shown in the following figure:
Figure 2-15 Tools menu
Help menu
The menu options are shown in the following figure:
....................................................................................................................................................................................................................................
1646 SMC
2-13
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
System Management
Help menu
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
2-14
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Equipment management
3
Overview
Purpose
3-1
3-5
3-12
...................................................................................................................................................................................................................................
1646 SMC
3-1
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Equipment management
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
The following table provides description of the Rack xx > Shelf xx > Board xx
parameters.
Table 3-1
Parameter
Description
Access Identifier
Current Provisioned
Type
Alarm Profile
....................................................................................................................................................................................................................................
1646 SMC
3-2
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Equipment management
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Parameter
Description
Access Identifier
Phase
...................................................................................................................................................................................................
Provision a module
...................................................................................................................................................................................................
Click Provision hyperlink to provision the SFP module for the selected board as shown in
Figure 3-1, Rack xx > Shelf xx > Board xx (p. 3-2).
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
3-3
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Equipment management
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Select the SFP/XFP module from the Provisioned Type drop-down list box.
...................................................................................................................................................................................................
Click Save to save the settings, the tree area displays the XFP module provisioned on the
selected facility.
...................................................................................................................................................................................................
Click View hyperlink displayed under Alarms and Conditions panel to view the
alarms/conditions raised by the equipment.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
3-4
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Equipment management
....................................................................................................................................................................................................................................
Select Rack xx Shelf xx Board xx Module Port from the tree area displays
the following tabs:
Physical
Bridge
IGMP Snooping
PM Data
....................................................................................................................................................................................................................................
1646 SMC
3-5
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Equipment management
....................................................................................................................................................................................................................................
Figure 3-3 Rack xx > Shelf xx > Board xx > Module xx > Port
....................................................................................................................................................................................................................................
1646 SMC
3-6
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Equipment management
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
The State panel allows to change the settings of the resource by means of the following
parameters:
Table 3-3
Parameter
Description
Port
Administrative status
Last change
Operational State
...................................................................................................................................................................................................
The Ethernet port panel allows to change the settings of the resource by means of the
following parameters:
Parameter
Description
Connector present
Type
Speed
Alias
Encapsulation mode
....................................................................................................................................................................................................................................
1646 SMC
3-7
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Equipment management
....................................................................................................................................................................................................................................
Parameter
Description
Maximum MRU
Promiscous mode
Client type
Underlie Layer
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
3-8
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Equipment management
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Description
Bridge State
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
3-9
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Equipment management
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Description
Name
Granularity Period
Direction
15m
24h
Tx
Rx
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
3-10
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Equipment management
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Description
Time Stamp
EINB
EINF
...................................................................................................................................................................................................
...................................................................................................................................................................................................
Description
Time Stamp
EONB
EONF
....................................................................................................................................................................................................................................
1646 SMC
3-11
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Equipment management
....................................................................................................................................................................................................................................
E...................................................................................................................................................................................................
N D O F S T E P S
The NE will be able to receive and process three separate customer-defined inputs for
fault conditions arising externally to the NE. The fault conditions will be processed and
reported as for internally detected fault conditions.
It will be possible to disable the reporting from any input if not used. The inputs will be
capable of interfacing to a dry relay contact, i.e. an input will comprise two wire interface
capable of detecting an open or closed circuit condition between the two connections.
Each user alarm input shall be separately configurable to accept either a closed circuit or
open circuit state as the active alarm condition. The inputs from the dry contacts are
normally used for site specific alarms such as open door, high temperature, high water
level, etc. The polarity of an external input control determines the relationship between
the declaration of an environmental condition and the physical signal. The NE shall drive
1 separate output station controls for customer defined site specific facilities external to
the NE, such as air conditioning, generators, etc. Operating an external control means that
a relay is activated to control some external device. Releasing an external control means
deactivating the relay. The polarity of an external output control determines the
relationship between the control state (CONTSTATE) value and the physical signal.
Provisioning of housekeeping alarms and controls shall be persistent Customer access to
the Housekeeping (HKP) connections shall be via 25 pin D-Sub connector on the NE user
access panel.
Input Points
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
3-12
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Equipment management
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Select the Shelf Access Identifier from the drop-down list. Click Continue.
...................................................................................................................................................................................................
...................................................................................................................................................................................................
Parameter
Description
Notification Code
Alarm Type
Polarity
...................................................................................................................................................................................................
Select View under the Alarm Access Identifier column and the following screen appears
that contains
....................................................................................................................................................................................................................................
1646 SMC
3-13
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Equipment management
....................................................................................................................................................................................................................................
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
3-14
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Equipment management
....................................................................................................................................................................................................................................
Output Points
...................................................................................................................................................................................................
Select the Shelf Access Identifier from the drop-down list. Click Continue.
...................................................................................................................................................................................................
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
3-15
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Equipment management
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
3-16
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
4
Overview
Purpose
Provides a description of the Ethernet functionality and features supported in the Zero
Installation Craft (ZIC) terminal.
Contents
Procedure 4-1: Traffic descriptor
4-2
4-5
4-8
4-10
4-11
4-13
4-14
4-16
4-18
4-19
4-20
4-23
4-25
4-26
4-28
4-29
4-30
4-31
4-32
4-34
...................................................................................................................................................................................................................................
1646 SMC
4-1
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
Table 4-1
Parameter
Description
User Label
....................................................................................................................................................................................................................................
1646 SMC
4-2
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
Table 4-1
(continued)
Parameter
Description
Service type
Specifies the type of service the traffic. Identifies the used output queue.
Queue is specified by specifying the service type.
CIR [Kb/sec]
PIR [Kb/sec]
Peak Information Rate - This is the maximum peak rate allowed (kb/sec)
for the Tunnel/Pseudowire.
CBS [KBytes]
Committed Burst Size - This is the maximum burst size (byte) with high
priority guaranteed for the Tunnel/Pseudowire packets deliver.
PBS [KBytess]
Peak Burst Size - This is the maximum burst rate allowed (byte) for the
Tunnel/Pseudowire.
....................................................................................................................................................................................................................................
1646 SMC
4-3
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
The Traffic Descriptor tab displays the table that contains different traffic descriptor
entries.
Table 4-2
Parameter
Description
Service type
CIR [Kb/sec]
This is the normal medium rate (expressed in kb/sec) of the data flow
(Effective Bandwidth) and it ranges from 0 to PIR value. It can be set
only if the RegulatedService has been selected; in BestEffortService
case it is set to 0 by the system; in GuaranteedService case it is set equal
to PIR value.
PIR [Kb/sec]
....................................................................................................................................................................................................................................
1646 SMC
4-4
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
Table 4-2
(continued)
Parameter
Description
CBS [Kbytes]
This is the committed number of bytes for which the source may
transmit the PIR; it ranges from 0 to 64 MB. It can be set only if the
RegulatedService traffic has been selected; in BestEffortService case it
is set to 0 by the system; in GuaranteedService case it is set equal to PBS
value. A value greater than MTU (e.g. 2000) is advisable.
PBS [Kbytes]
This is the number of bytes for which are allowed to be sent above PIR
or CIR before the colour (drop eligibility) of the packet changes; it
ranges from 1 to 64 MB (this max value cannot be greater than the
minimum value of 64 MB or 256xCBS. I.e.: if CBS=2000, then
PBS<512 kB). A value greater than MTU (e.g. 2000) is advisable.
...................................................................................................................................................................................................
td_undefined
td_colorBlind
td_colorAware
td_colorAwareNoCoupling
td_colorAwareWithCoupling
...................................................................................................................................................................................................
Click Save & Exit to save all the changes and exit from the window.
...................................................................................................................................................................................................
Click Save & Continue to save the settings and create another traffic descriptor.
E...................................................................................................................................................................................................
N D O F S T E P S
This procedure is used to monitor and to count the amount of dynamic NE resources,
where dynamic NE resources (for example, ETS Classifier, ETS Inflow, ETS Outflow
and so on..) are mapped inside NE internal resources.
....................................................................................................................................................................................................................................
1646 SMC
4-5
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
to report the Used amount of entries and the Available amount of entries
(associated to each dynamic NE resource) to a Management operator, informing the
Management Operator when available resources are exhausted
to support Resource management feature to track Resources limitations (on per-NE
basis) through dedicated Resource Management pools (see Figure 4-2, Resource
Management Pools (p. 4-6) ). Each Resource Management Pool allows the
monitoring of a resource, relying on the following retrieved information (for each
resource):
used entries
available entries
to keep aligned the values inside Management Pools with Packet processor CAM
....................................................................................................................................................................................................................................
1646 SMC
4-6
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
Parameter
Description
ETS Cross-Connections
Used
Available
Unavailable
Nominal
Used
Available
Unavailable
Nominal
Used
Available
Unavailable
Nominal
Static Filtering
Used
Available
Unavailable
Nominal
....................................................................................................................................................................................................................................
1646 SMC
4-7
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
E...................................................................................................................................................................................................
N D O F S T E P S
Use this procedure to manage the MAC Access Control List (MAC ACL).
Procedure
...................................................................................................................................................................................................
Select Data MAC Access Control List option from the menu bar.
Figure 4-3 MAC Access Control List panel
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
4-8
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Table 4-4
Parameter
Description
ACL Identifier
ACL Name
Apply Change
Allows to select the change to the ACL. Values are: true or false.
Status
...................................................................................................................................................................................................
Management Access Control Element (ACE) panel contains to View hyperlink. Click
View to Search the Management ACE.
....................................................................................................................................................................................................................................
1646 SMC
4-9
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Management Actual Access Control Element (ACE) panel contains to View hyperlink.
Click View to Search the Management ACE.
...................................................................................................................................................................................................
Click Cancel to cancel the settings on the page and return to previous page.
E...................................................................................................................................................................................................
N D O F S T E P S
The virtual LAN (VLAN) management provides reports the registered VLANs associated
to the Ethernet interface existing on the each data card and in specific range. VLAN
registration is not applicable to MAC Bridge case.
User this procedure to set the virtual LAN mode.
Procedure
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
4-10
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Table 4-5
Parameter
Description
User Label
...................................................................................................................................................................................................
Click Cancel to cancel the operation and return to the previous page.
...................................................................................................................................................................................................
Click Save & continue to apply the changes and continue the configuration process.
...................................................................................................................................................................................................
Click Save & Exit to apply the changes and the following page appears.
E...................................................................................................................................................................................................
N D O F S T E P S
Ethernet Functions
....................................................................................................................................................................................................................................
When to use
...................................................................................................................................................................................................
Table 4-6
Parameter
Description
User Label
Priority
Dscp
....................................................................................................................................................................................................................................
1646 SMC
4-12
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
Table 4-6
(continued)
Parameter
Description
Priority Bits 0 to 7
green
red
yellow
...................................................................................................................................................................................................
Select Dscp from the Color Profile Mode drop-down list. The Priority bits increases to 063.
...................................................................................................................................................................................................
Click Cancel to unsave the settings and return to the previous page.
...................................................................................................................................................................................................
Click Save & Exit to save the settings and return to the previous page.
...................................................................................................................................................................................................
Click Save & Continue to save the settings and continue to create another color profile.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
4-13
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Select the Type of bridge to be configured from the Bridge Type drop-down list box.
The values are:
Bridge802.1D
Bridge802.1Q
Bridge802.1ad
...................................................................................................................................................................................................
Select the type of protocol from the Protocol Type drop-down list box.
The values are:
manuaDisable
STP
RSTP
...................................................................................................................................................................................................
Click Save & Continue to save the setting and continue to create another bridge
configuration.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
4-14
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
Procedure
...................................................................................................................................................................................................
...................................................................................................................................................................................................
The IGMP Management per NE displays the details of Board, Router Neighbor Timeouts
and their status.
Click Create link to configure IGMP management for a new board.
Result: The IGMP Configurations per NE panel is displayed
...................................................................................................................................................................................................
Click Select link to choose the board for IGMP configuration is done.
Result: A new window is displayed with a list of boards.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
4-15
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
4-16
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Enter the new Asap Label in the entry box and click Create as shown in the following
figure.
Figure 4-11 New ASAP
...................................................................................................................................................................................................
Table 4-7
Parameter
Description
Alarm type
SA - Severity in
service affecting
case
Specifies the alarm severity levels in case of affecting the service. The
values are:
critical
major
minor
warning
intermediate
....................................................................................................................................................................................................................................
1646 SMC
4-17
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
Table 4-7
(continued)
Parameter
Description
NSA - Severity in
non service affecting
case
Specifies the alarm severity levels in case of non service affecting case.
The values are:
critical
major
minor
warning
intermediate
...................................................................................................................................................................................................
Click Save or add severity row for adding a new severity row.
...................................................................................................................................................................................................
Select Data OAM management Global Setting option from the menu bar.
...................................................................................................................................................................................................
The NE Global Setting tab displays the OAM Global Configuration panel.
This panel contains the following parameters:
ETH Type
LBM Time Out [sec]
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
4-18
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
Select Data OAM Management OAM Resource config. MD option from the
menu bar.
Click Create hyperlink.
Result: The Create Maintenance Domain panel is displayed.
Figure 4-12 Create Maintenance Domain panel
Parameter
Description
MD Label
Name
MHFCreation
Format
....................................................................................................................................................................................................................................
1646 SMC
4-19
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
Table 4-8
(continued)
Parameter
Description
Level
Specifies the maintenance domain levels. The valid range is from Level0
to Level7
Status
...................................................................................................................................................................................................
Click Save to save the settings and return to the previous panel.
...................................................................................................................................................................................................
Click Cancel to cancel the settings and return to the previous panel.
E...................................................................................................................................................................................................
N D O F S T E P S
Select Data OAM Management OAM Resource config. MA option from the
menu bar.
....................................................................................................................................................................................................................................
1646 SMC
4-20
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
Parameter
Description
Search Filter
Specifies the search criteria. The values are show all or specify criteria
MD From To
MA From To
...................................................................................................................................................................................................
Click Search/Refresh to filter the Maintenance Association based on the range selected.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
4-21
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
Parameter
Description
MD
Status
MA Index
MHFCreation
MA Name
CCM Interval
Format
Specifies the format for new Maintenance Association. The values are:
charString
Type
Type is vid
Vid
....................................................................................................................................................................................................................................
1646 SMC
4-22
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Click Cancel to cancel the settings and return to the previous panel.
...................................................................................................................................................................................................
Click Save to save the settings and return to the previous panel.
E...................................................................................................................................................................................................
N D O F S T E P S
Select Data OAM Management OAM Resource config. MA MEP list option from
the menu bar.
Result: The Maintenance Associations Range panel is displayed.
Figure 4-15 MA MEP List Range panel
Parameter
Description
Search Filter
Specifies the search criteria. The values are Show all or Specify
Criteria.
....................................................................................................................................................................................................................................
1646 SMC
4-23
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
Table 4-11
Parameter
Description
MD From To
MA From To
MEP From To
(continued)
...................................................................................................................................................................................................
Select the filter criteria from the Search Filter drop-down list box. The values are: Show
alland specify criteria.
...................................................................................................................................................................................................
If Show all is selected as a search filter the MD From and To and MA From and To range
cannot be set by the user. To set the specified range, select specify criteria and click
Search that displays the existing MA MEP list.
...................................................................................................................................................................................................
Select Data OAM Management OAM Resource config. MEP option from the
menu bar.
Click Create hyperlink.
Figure 4-16 Create MEP panel
Parameter
Description
MA Label
MEP Identifier
If Index
....................................................................................................................................................................................................................................
1646 SMC
4-24
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
Table 4-12
(continued)
Parameter
Description
LTM/CCM Priority
(0..7)
LBM Priority
CCIEnable
Active
Direction
true
false
Up
Down
...................................................................................................................................................................................................
Click Select to choose the MA Label, MEP Identifier and If index values and click Save
to store the settings.
...................................................................................................................................................................................................
Click Cancel to revoke all the settings and return to the previous panel
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
4-25
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
Result: The EFM tool tab displays the Search Local Port panel.
Figure 4-17 EFM tool
...................................................................................................................................................................................................
Click Show.
Result: The EFM Tool panel with Configuration and Link Monitoring tabs is
displayed.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
4-26
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
Result: The EFM tool panel is displayed with the Configuration and Link Monitoring
tabs. By default the Configuration tab is opened.
Figure 4-18 EFM tool
...................................................................................................................................................................................................
Click Save on the bottom left pane of the panel to save the changes.
...................................................................................................................................................................................................
Click Cancel to undo the changes and return back to the Search Local Port panel.
...................................................................................................................................................................................................
Click Show.
....................................................................................................................................................................................................................................
1646 SMC
4-27
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
Result: The EFM Tool panel with Configuration and Link Monitoring tabs is
displayed.
E...................................................................................................................................................................................................
N D O F S T E P S
Select Data Virtual LAN Management Virtual LAN option from the menu bar.
Result: The VLAN Registration tab is displayed
Figure 4-19 VLAN Registration
...................................................................................................................................................................................................
Enter the range of ports to be searched in From: and To: boxes and click Search.
Result: The search result is displayed.
...................................................................................................................................................................................................
Click Create link on the bottom left pane of the VLAN Registration tab.
Result: The Create VLAN panel is displayed.
...................................................................................................................................................................................................
Enter a numeric value in the VLAN Id: text box. Then select the port to which you want to
assign the VLAN Id from the list of ports in Available Port panel and by clicking
.
....................................................................................................................................................................................................................................
1646 SMC
4-28
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
Select Data Virtual LAN Management Virtual LAN option from the menu bar.
Result: The VLAN Registration tab is displayed
Figure 4-20 VLAN Registration
...................................................................................................................................................................................................
Enter the range of ports to be searched in From: and To: boxes and click Search.
Result: The search result is displayed.
....................................................................................................................................................................................................................................
1646 SMC
4-29
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Select the check box of the VLAN that you want to configure and click Configure link
given for the selected VLAN.
Result: The Modify VLAN panel is displayed.
Figure 4-21 Modify VLAN
Parameter
Description
VLAN
Limit in learning
process
Port#
Value
Untagged
...................................................................................................................................................................................................
Click Cancel to undo the changes and return back to VLAN Registration panel.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
4-30
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
Procedure
...................................................................................................................................................................................................
Select Data Virtual LAN Management DB Filtering option from the menu bar.
Result: The Dynamic Filtering Parameter panel is displayed
Figure 4-22 Dynamic filtering database
...................................................................................................................................................................................................
Enter the time interval in seconds in Aging Time (seconds): text box and click Save.
Note: The value entered for Aging Time (seconds): should be in multiples of 60. If
any value other than this is entered, it throws up an error as shown in Figure 4-23,
Dynamic filter error message (p. 4-31).
Figure 4-23 Dynamic filter error message
Select Data Virtual LAN Management DB Filtering option from the menu bar.
....................................................................................................................................................................................................................................
1646 SMC
4-31
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Parameters
Description
VLAN ID
MAC Address
Outbound port
...................................................................................................................................................................................................
Click on the Select link to choose an existing VLAN ID from the drop-down list.
...................................................................................................................................................................................................
Click on the Select link to choose an existing outbound data ports from the drop-down
list.
...................................................................................................................................................................................................
Click Save & Exit to save the settings and return to the previous window.
...................................................................................................................................................................................................
Click Save & Continue to save the setting and configure another unicast entry.
...................................................................................................................................................................................................
Click Cancel to cancel the settings and return back to previous window.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
4-32
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
Procedure
...................................................................................................................................................................................................
Select Data Virtual LAN Management DB Filtering option from the menu bar.
Result: The Static Multicast Filtering tab is displayed
Figure 4-25 Static Multicast Filtering
...................................................................................................................................................................................................
Parameters
Description
VLAN ID
MAC Address
Outbound port
...................................................................................................................................................................................................
Click on the Select link to choose an existing VLAN ID from the drop-down list.
...................................................................................................................................................................................................
Click on the Select link to choose an existing outbound data ports from the drop-down
list.
...................................................................................................................................................................................................
Click Save & Exit to save the settings and return to the previous window.
...................................................................................................................................................................................................
Click Save & Continue to save the setting and configure another multicast entry.
...................................................................................................................................................................................................
Click Cancel to cancel the settings and return back to previous window.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
4-33
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Click Create to create a new P2P instance. The following screen appears.
....................................................................................................................................................................................................................................
1646 SMC
4-34
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
Parameter
Description
Type
From
To
Service Label
...................................................................................................................................................................................................
Click Cancel to cancel all the settings and return to the previous window.
...................................................................................................................................................................................................
Click Save & Exit to save the settings and exit from the window.
...................................................................................................................................................................................................
Click Save & Continue to save the settings and configure another P2P instance.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
4-35
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Ethernet Functions
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
4-36
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Synchronization
5
Overview
Purpose
Provides an overview of the chapter contents and an introduction to Time and Alarm
Synchronization.
Contents
Synchronization menu
5-1
5-2
5-3
5-5
Synchronization outgoing
5-12
Synchronization menu
This menu allows the operator to manage the ports dedicated to BITS (Building
Integrated Timing Source) facilities for clock distribution purposes. A BITS output
reference is a DS1 signal.
The menu options are:
...................................................................................................................................................................................................................................
1646 SMC
5-1
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Synchronization
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
5-2
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Synchronization
....................................................................................................................................................................................................................................
Access Identifier - Specifies the access identifier for the selected BITS
Signal Format - Specifies the signal format. The values are 2MHZ, or 2MBIT-SSM
SA Bit Location - Specifies the SA bit location used to carry the SSM information.
The values are SA4, SA5, SA6, SA7, and SA8. The default menu value is the
previous existing value. If the existing value is empty. The default existing value is
SA4.
SSM Supported - Specifies whether the timing input port supports SSM or not. The
values are Y and N.
...................................................................................................................................................................................................
The Save link is used to send the related command to the Network Element.
Automatically the Modify BITS page is loaded to show updated data.
...................................................................................................................................................................................................
A further panel Alarms allows to display the alarms relevant to the BITS. Click View
hyperlink to view the alarms.
E...................................................................................................................................................................................................
N D O F S T E P S
Use this procedure to edit to search and edit bit out related to a given shelf
....................................................................................................................................................................................................................................
1646 SMC
5-3
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Synchronization
....................................................................................................................................................................................................................................
Procedure
...................................................................................................................................................................................................
Select Synchronization Bits Modify BITS OUT. The following panel appears.
Figure 5-3 Modify BITS OUT Select shelf panel
...................................................................................................................................................................................................
...................................................................................................................................................................................................
Access Identifier - Specifies the access identifier for the selected BITS
Signal Format - Specifies the signal format. The values are 2MHZ, or 2MBIT-SSM
....................................................................................................................................................................................................................................
1646 SMC
5-4
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Synchronization
....................................................................................................................................................................................................................................
SA Bit Location- Specifies the SA bit location used to carry the SSM information. The
values are SA4, SA5, SA6, SA7, and SA8. The default menu value is the previous
existing value. If the existing value is empty. The default existing value is SA4.
Transmitted ESF - Specifies if the output signal is the DUS message or is the actual
SSM value. The values are DUS and ACT. The default value is the previous existing
value. If the existing value is empty. The default existing value is DUS.
Enable Output - Specifies the output mode to which the facility is set. The values are
Y and N. The default value is N.
AIS Mode - Specifies which signal is inserted for the timing output port if the output
signal is squelched. The values are AISMODE and QLMODE. The default values is
the previous value. If the existing value is empty, the default factory value is
QLMODE.
Outgoing Signal Quality - Specifies the quality value level for the out-going signal at
the timing output port. The values are PRC, SSUL, SSUT, SEC, and DUS.
SA Bit Location - Specifies the SA bit location used to carry the SSM information.
The values are SA4, SA5, SA6, SA7, and SA8. The default menu value is the
previous existing value. If the existing value is empty. The default existing value is
SA4.
SSM Supported - Specifies whether the timing input port supports SSM or not. The
values are Y and N.
...................................................................................................................................................................................................
Click Save that is used to send the related command to the Network Element.
Automatically the Modify BITS OUT page is loaded to show updated data.
E...................................................................................................................................................................................................
N D O F S T E P S
Use this procedure to retrieve, edit, remove, and restore Building Integrated Timing
Source (BITS) timing and to switch system clock synchronization from one reference to
the other.
General
Synchronization
....................................................................................................................................................................................................................................
Locked mode (normal mode) - Steady state, the SETG generated clock signal is
controlled by the selected external timing reference determined by the T0 selection
process
Holdover mode - Steady state. The operating condition of a clock that has lost its
references and is using data previously acquired (when it was operating in the normal
mode) to control its output signal.
Free-running mode - Temporary operating mode. The operating condition when the
output signal is totally internally controlled with no influence of a present or previous
reference.
Procedure
...................................................................................................................................................................................................
...................................................................................................................................................................................................
Select the access identifier from the Access Identifier drop-down list.
The values are:
ALL
SYNC
EXTREF
LINEREFSYS
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
5-6
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Synchronization
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
...................................................................................................................................................................................................
Click the radio button under Select column to set the access identifier.
...................................................................................................................................................................................................
Click Modify hyperlink to edit the system timing entity parameters as shown in the
following figure.
....................................................................................................................................................................................................................................
1646 SMC
5-7
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Synchronization
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Set the Sync Messaging to either Y or N. Click Default to choose the default setting.
...................................................................................................................................................................................................
Click View to view the alarm profile for the selected timing entity from the Alarms panel.
...................................................................................................................................................................................................
10
Click Save to set the synchronization settings for the system timing entity and return to
the Synchronization window.
...................................................................................................................................................................................................
11
Click Operate or Release hyperlinks to perform the operate and release functions on
either system timing or references timing entities.
E...................................................................................................................................................................................................
N D O F S T E P S
Operate
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
5-8
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Synchronization
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
The Synchronization Switch Outgoing tab displays the Modify Synchronization Switch
panel that contains the following parameters:
Switch Command - Specifies the switch command that is requested by the user. The
...................................................................................................................................................................................................
Release
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
5-9
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Synchronization
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
The Synchronization Switch Outgoing tab displays the Modify Synchronization Switch
panel that contains the following parameters:
Switch Command - Specifies the switch command that is requested by the user. The
Access Identifier
....................................................................................................................................................................................................................................
1646 SMC
5-10
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Synchronization
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Shelf Access Identifier - This is used to change the access identifier according to the
...................................................................................................................................................................................................
The Search link sends the TL1 command to the agent and results are displayed in the
following Synchronization Message Search page.
Figure 5-11 Search synchronization message results
....................................................................................................................................................................................................................................
1646 SMC
5-11
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Synchronization
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Incoming SSM Message - Specifies the actual quality value for the incoming SSM
Synchronization outgoing
This option contains the following sub-menu options:
shelf
shelf
shelf
Search
...................................................................................................................................................................................................
...................................................................................................................................................................................................
The Synchronization Outgoing tab displays the Synchronization Outgoing panel that
contains the following parameters:
Shelf Access Identifier - This is used to change the content of Access Identifier
....................................................................................................................................................................................................................................
1646 SMC
5-12
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Synchronization
Synchronization outgoing
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Operate
...................................................................................................................................................................................................
...................................................................................................................................................................................................
The Synchronization Switch Outgoing tab displays the Modify Synchronization Switch
Outgoing panel that contains the following parameters:
Switch Command - Specifies the switch command that is requested by the user. The
...................................................................................................................................................................................................
Release
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
5-13
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Synchronization
Synchronization outgoing
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
The Synchronization Switch Outgoing tab displays the Modify Synchronization Switch
Outgoing panel that contains the following parameters:
Shelf Access Identifier - This is used to change the content of the Access Identifier
parameter according to the selected shelf access identifier
Access Identifier - Specifies the access identifier of the synchronization facility
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
5-14
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Alarm Management
6
Overview
Purpose
supports different types of alarms and events in various scenarios related to the equipment
and transmission.
This section defines the alarms or events supported on the network element. The probable
cause, raise/clear criteria, object against which alarm is raised, alarm domain, and
consequent actions for each of the supported alarms are defined in the following table.
Contents
Procedure 6-1: Provision alarm severity assignment profiles
6-1
6-4
6-5
6-6
...................................................................................................................................................................................................................................
1646 SMC
6-1
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Alarm Management
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Select the ASAP Profile from the drop-down list as shown in the figure.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
6-2
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Alarm Management
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
The ASAP AID, Condition Type, Notification Code, displays the default values in the
ASAP MODIFY panel.
....................................................................................................................................................................................................................................
1646 SMC
6-3
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Alarm Management
....................................................................................................................................................................................................................................
Note: Only Notification Code is modifiable by the user. ASAP AID and Condition
Type cannot be modified by the user.
Note: The alarm severity of specified Condition Type can be modified by selecting a
parameter in Notification Code.
...................................................................................................................................................................................................
Choose the Notification Code as either CR, MJ, MN, WR, or NR.
...................................................................................................................................................................................................
Click Save & continue to save the settings and to modify another ASAP.
...................................................................................................................................................................................................
Click Cancel to revoke all changes and return to the previous page.
E...................................................................................................................................................................................................
N D O F S T E P S
...................................................................................................................................................................................................
Click on SEND functional button a command cuts off the office audible alarm indications
without changing the local alarm reporting.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
6-4
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Alarm Management
....................................................................................................................................................................................................................................
The currently active audible alarm indications will be silenced. The visual alarm
indications are not affected. Future alarm reporting is not be affected and new audible
alarm indications will be provided for any new alarms.
The ACO LED turns on and a new alarm arrives, it is presented to the audible
closures and the ACO LED switches off. Alarms silenced is not presented to the
Audible closures even if they are still present (only new alarms).
E...................................................................................................................................................................................................
N D O F S T E P S
Use this procedure to update the alarm database to the current alarm situation.
Procedure
...................................................................................................................................................................................................
...................................................................................................................................................................................................
Click Resynchronize, a command refreshes the alarms and the relevant information is
referred.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
6-5
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Alarm Management
....................................................................................................................................................................................................................................
Use this procedure to collect the alarm history report from the NE.
Procedure
...................................................................................................................................................................................................
...................................................................................................................................................................................................
The Alarm Log tab displays the Filter by panel that contains the following parameters.
Table 6-1
Parameter
Description
Domain
Specifies the domain for filtering the alarm. The values are ALL, TDM,
and DATA.
Note1: If the selected Domain value is DATA, the widow displays
Severity drop down, the values are: CRITICAL, MAJOR, MINOR,
WARNING, and CLEARED.
Note2: If the selected Domain value is ALL, the Event Type and Aid
Type parameters are not available.
Event Type
Specifies the event type that triggers alarm. The values is ALM.
....................................................................................................................................................................................................................................
1646 SMC
6-6
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Alarm Management
....................................................................................................................................................................................................................................
Table 6-1
(continued)
Parameter
Description
Aid Type
...................................................................................................................................................................................................
The Search link allows to filter the alarm details based on the selection criteria.
...................................................................................................................................................................................................
The Reset Criteria link allows to reset the new criteria to apply the filter.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
6-7
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Alarm Management
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
6-8
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Security
7
Overview
Purpose
This section is related to security within the Zero Installation Craft (ZIC) terminal. The
functions of configuration and installation are accessible only to the administrator.
Provides an overview of the Security menu and features.
Contents
Procedure 7-1: Change user password
7-2
7-2
7-4
7-5
7-8
7-9
7-10
7-12
7-15
7-16
...................................................................................................................................................................................................................................
1646 SMC
7-1
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Security
....................................................................................................................................................................................................................................
Use this procedure to change or configure the password used when logging into a
Network Element (NE).
Procedure
...................................................................................................................................................................................................
Select Security User Account Change Password option from the menu bar.
Figure 7-1 Change user password
...................................................................................................................................................................................................
The User Identifier and Old Password ID entry boxes display the user name and
password with which the user has logged in.
...................................................................................................................................................................................................
Enter the new password in the New Password ID entry box. Enter the same password in
Confirm New Password ID entry box.
...................................................................................................................................................................................................
The system generates an error message if the newly entered password is violating the
password naming convention. Go to Step 3 to re-enter the correct string.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
7-2
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Security
....................................................................................................................................................................................................................................
When to use
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
7-3
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Security
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Parameter
Description
User Identifier
Password Identifier
Confirm Password
Identifier
Password Duration
[day]
....................................................................................................................................................................................................................................
1646 SMC
7-4
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Security
....................................................................................................................................................................................................................................
Table 7-1
(continued)
Parameter
Description
Warning on
Password Duration
[day]
Access after
Password Duration
Default is 3 days.
Password
Obsolescence
Interval [day]
User ID Duration
[day]
Default is 60 days.
Available User
Access Privileges
User Access
Privileges
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
7-5
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Security
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Parameter
Description
ACTION
User Identifier
Modify Account
Inhibit User
Allow User
Delete Account
....................................................................................................................................................................................................................................
1646 SMC
7-6
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Security
....................................................................................................................................................................................................................................
Table 7-2
(continued)
Parameter
Description
User Access
Privileges
Read-only (READ)
Provision (PROV)
Configure (CONF)
Test (DEBUG)
User State
This shows the new user's login password. The values that can be
displayed are Active and Suspended
Password Duration
[day]
Warning on
Password Duration
[day]
This shows the number of days after the expiration date, that is allowed
for the user to change the password.
Access after
Password Duration
This shows the number of times that a user can log in after Password
expiration.
0 (zero) means that the grace extra log-in after password expiration is
disabled.
Password
Obsolescence
Interval [day]
This shows the minimum time interval that is required if the User wishes
to use a password that was already used.
Password Expiration
date and time
User ID Duration
[day]
Last Login
TimeStamp
This shows the time interval, in minutes, after which the NE shall send a
KEEP ALIVE MESSAGE on a TCP connection inactivity. The value
range is 0 - 240. 0 (zero) means that KEEP ALIVE MESSAGE sending
is disabled.
....................................................................................................................................................................................................................................
1646 SMC
7-7
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Security
....................................................................................................................................................................................................................................
Table 7-2
(continued)
Parameter
Description
Minimum Interval
between invalid
attempts [sec]
Maximum Invalid
Attempts
User Session
Inactivity Timeout
[min]
This shows User Session Activity Link TimeOut, specifies the amount of
time (in minutes) that the User Session link is inactive with regards to
user TL1 input before a user session link time-out occurs.
0 (zero) means that no user session link timeout will occur (disabled).
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
7-8
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Security
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
See Table 7-2, Change User information window (p. 7-6) for parameter description.
...................................................................................................................................................................................................
Click Default hyperlink next to each parameter to enter the default settings.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
7-9
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Security
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Current sessions
Parameters
Description
Action
Contains the Log Off User hyperlink which allows to close the session
User Identifier
Session
Address
Specifies the address where the user is connecting from. It is the port/IP
address that is being used for access. If a non IP port is used to connect
to the NE, the values DCC, LAN, USB, RS232 are used
Specifies by a quoted string the last recorded Login time of a user. This
time is displayed every time a user logs in
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
7-10
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Security
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
7-11
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Security
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
The page the command security privileges assigned to the specified TL1 command.
The columns of the table are:
Action - Contains the hyperlinks in order to modify the security privilege. The
manager actions related to these hyperlinks are:
The Modify hyperlink activates the following Modify Command Access
Privileges page.
Command Identifier - Specifies the TL1 command code. The value for the parameter
can be any one of the TL1 command codes, in upper or lower case.
Command Access Privilege - Allows to choose the User access privileges granted to
the user.
E...................................................................................................................................................................................................
N D O F S T E P S
Use this procedure to activate the Audit Security Log page and retrieve audit log.
Procedure
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
7-12
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Security
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
The Audit Log tab contains the Retrieve Audit Log panel with the following parameters:
From - Specifies the beginning date and time used to filter the response messages. By
...................................................................................................................................................................................................
The Retrieve hyperlink send the command to the agent, then the Retrieve Audit Log
page is reloaded and the table with Security log is displayed
....................................................................................................................................................................................................................................
1646 SMC
7-13
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Security
....................................................................................................................................................................................................................................
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
7-14
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Security
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
The Modify Log Attributes page is made up of description of the TL1 command and the
Modify Log Attributes panel that contains:
Current Log File Max Size [Mbyte] - Specifies the size, in 1 Megabyte blocks, of the
....................................................................................................................................................................................................................................
1646 SMC
7-15
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Security
....................................................................................................................................................................................................................................
shown
New Warning Message - Allows to provision a new user-logon warning message. The
Default hyperlink allows to set the relevant warning message automatically. The Set
Empty hyperlink allows to deplete the entry field.
Current Log Events - Specifies the current log event.
Available Log Events - Specifies the list of events that, upon their occurrence, are
included in the security log (i.e., events that are specified for logging, if they occur).
The values are:
Authentication Event (EIUA) - It logins, logoffs, invalid user authentication
attempts and the alarms/alerts generated due to the invalid authentication attempts
Changes to the User's Security Accounts (EUSP) - Specifies the details of the
changes made in a user's security profiles and attributes
They can be copied or removed from one of the entry box using the left or right arrow
buttons available between the two entry boxes.
...................................................................................................................................................................................................
Click Save hyperlink to send the command to the agent; the main page is reloaded.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
7-16
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Security
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
The Modify In Progress Message Settings panel is displayed that contains the following
parameters:
seconds.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
7-17
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Security
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
7-18
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
8rovisioning: Detailed
P
level Procedures
Overview
Purpose
8-2
8-3
8-4
8-6
8-9
8-10
8-13
8-14
8-15
8-16
8-18
8-19
8-22
8-24
8-26
8-27
8-29
8-31
8-33
8-35
8-40
...................................................................................................................................................................................................................................
1646 SMC
8-1
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Overview
....................................................................................................................................................................................................................................
8-43
8-45
8-47
8-49
8-49
Use this procedure to log into the Zero Installation Craft (ZIC) terminal.
Procedure
...................................................................................................................................................................................................
See Procedure 2-1: Establish ZIC session (p. 2-4) for the initial steps to launch the ZIC
session.
...................................................................................................................................................................................................
Enter the User Identifier and Password in the respective entry boxes, set the Language
from the drop-down list box. The default is English.
The default User is ALCATEL and password is Alcatel_1.
...................................................................................................................................................................................................
Enable the Local Time check box for the network element to display the local time.
...................................................................................................................................................................................................
Click Login to log into the system, the browser starts loading the ZIC.
....................................................................................................................................................................................................................................
1646 SMC
8-2
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
Note: After the maximum number of attempts the user is disabled. Check parameters
for spelling and case-sensitive characters.
E...................................................................................................................................................................................................
N D O F S T E P S
To log out from the Zero Installation Craft (ZIC) terminal, click the Logout hyperlink
displayed in the top right corner of the ZIC application.
OR
Select Security Logout.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
8-3
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
8-4
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
8-5
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
Select Connection TDM Search option from the menu bar to view and set the
cross-connection parameters for the search criteria
The following Connection panel is displayed.
Figure 8-4 TDM search
...................................................................................................................................................................................................
Connection panel
Parameters
Description
Retrieve Connection
command
....................................................................................................................................................................................................................................
1646 SMC
8-6
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
Table 8-1
Connection panel
(continued)
Parameters
Description
Filter by Access
Identifier Type
...................................................................................................................................................................................................
Click Search. The system retrieves the cross-connection details based on the search
parameter defined.
E...................................................................................................................................................................................................
N D O F S T E P S
Click on the Create hyperlink as shown in Figure 8-4, TDM search (p. 8-6) or select
Connection TDM Create from the menu bar.
The following screen appears.
Figure 8-5 TDM create with ENT-CRS
....................................................................................................................................................................................................................................
1646 SMC
8-7
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Parameters
Description
Enter Command
ENT-CRS
ENT-CRSPROT
To
Cross Connection
Type
Revertive
Y - Yes
N - No
Revertive Timer
Values are 0, 100, 300, 500, 700, 1000, 3000, 5000, 10000
Protection Type
SNCN
SNCI
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
8-8
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
8-9
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
When to use
This option starts the background activity on the NE to perform the actual switch over
from the current release to the new release. This option returns a completion message to
the user when the background activity is successfully started.
A copy of the primary database is generated during its execution and used for database
conversion in the upgrade processing. This backup is also used to revert to the old release
database when the Initialize System With Old Release option is issued after the system is
upgraded to the new release.
Procedure
...................................................................................................................................................................................................
The panel contains the Apply hyperlink that is used to start the new release downloading
procedure.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
8-10
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
8-11
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Parameters
Description
From
To
Remote File Server PM Global File Collection (RFSPMGLB) Represents the PM Global File Collection on a Remote File Server.
Multiple instances of RFSPMGLB can exist in different locations on
an RFS.A specific instance is always addressed with this AID, with
the addition of information in the LOCATION parameter in the
command.
Remote File Server MAC File Collection (RFSMACGLB) Represents the MAC File Collection on a Remote File Server.
Multiple instances of RFSMACGLB can exist in different locations
on an RFS. A specific instance is always addressed with this AID,
with the addition of information in the LOCATION parameter in the
command.
User
The user identifier used for the ftp connection on the RFS.
Password
The user password used for the ftp connection on the RFS
Host
....................................................................................................................................................................................................................................
1646 SMC
8-12
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
Table 8-3
(continued)
Parameters
Description
Port
The port number to connect to. Most schemes designate protocols that
have a default port number.
URL Path
The details of how the specified resource (i.e. the directory where the
file(s) reside) can be accessed.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
8-13
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
The Remote file tab displays the Cancel Copy of Remote File panel that contains the
following parameters.
Table 8-4
Parameters
Description
From
To
LOCMACGLB (LOCMACGLB)
...................................................................................................................................................................................................
Use this procedure to retrieve general system level configuration information consisting
of: system type, software release identifier, software release date, matrix size, system
restart status.
Procedure
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
8-14
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
The System Configuration tab displays the following general system level configuration
information.
Access Identifier
Matrix Size
Node Type
Provision Mode
Region
Release Date
Release Identification
System Restart Process Status
System Type
USER LABEL
E...................................................................................................................................................................................................
N D O F S T E P S
Use this procedure to change the unique site identifier (SID) for the NE.
The SID value can be either up to 20 noncase-sensitive alphanumeric characters,
including the special hyphen (-) character, or up to 20 characters quoted string.
If it is a non quoted string, the hyphen (-) is the only special character allowed. The SID
must start with a letter and shall end with an alphanumeric character. Consecutive
hyphens (-) shall not be allowed. Number of hyphens shall be not greater than 4. If a
lower-case character string is entered for the SID, it is automatically converted to an
uppercase character string for comparison to any TID value entered in a command.
If it is a quoted string, any character is allowed, included any special character, and no
case conversion is applied. On initial turn-up, the NE shall automatically generate an
unique SID, using the last 5 hexadecimal characters of the NE's MAC address and
appending them to the PLEASE- SET-SID name. This SID is updated (by reading the
....................................................................................................................................................................................................................................
1646 SMC
8-15
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
MAC address from the appropriate NE hardware module) and stored in the NE's database
during any cold restart of the NE, as long as the SID is already set to PLEASE-SET-SIDxxxxx, or a default database is created.
Procedure
...................................................................................................................................................................................................
Select System Management DB Management Set Site Identifier option from the
menu bar.
Figure 8-11 Set site identifier
...................................................................................................................................................................................................
New Site Identifier - Specifies the new site identifier for the NE.
...................................................................................................................................................................................................
Click Double Quotes hyperlink to insert double quotes for the new site identifier.
If lower-case characters are entered for the SID, they are converted to an upper-case
character string and stored as the SID value.
If a quoted string is entered for the SID, no case conversion is applied.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
When to use
...................................................................................................................................................................................................
The LAC state tab displays the Lac State Management panel that contains the following
parameters.
Table 8-5
Parameters
Description
LAC state
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
8-17
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
The mechanism of MAC File Collection is an efficient way of collecting MAC adrresses
of the entire NE in a single file.
The collection of MAC data will be done on the basis of the input filtering, where the
input filters consists of MAC address, slot AIDs and FDB IDs. The MAC File Collection
then generated will contain one line (record) for every retrieved MAC address in the NE
according to the input filtering.
Procedure
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
8-18
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
...................................................................................................................................................................................................
The MAC File Collection Status panel displays the Collection State and contains the
following hyperlinks:
Refresh
File View
...................................................................................................................................................................................................
Parameters
Description
MAC Address
Board
VLAN
...................................................................................................................................................................................................
This procedure provides the instructions to retrieve the Network Time Protocol (NTP)
server IP address, provision NTP servers, and delete NTP servers. It also provides
instructions to enable and disable the NTP synchronization.
NTP servers are used for time-of-day synchronization when the NTP protocol is enabled.
If no NTP server is entered and the NTP protocol is enabled, the time-of-day clock
synchronizes with the last known internal clock frequency.
When NTP is enabled, the NE internal time-of-day clock uses the calculated Coordinated
Universal Time (UTC) from the selected NTP server, which is modified by the
user-provisioned offset. All messages, event reports, logs, and events that carry time
stamps use the following time of day: NTP UTC time + provisioned offset.
....................................................................................................................................................................................................................................
1646 SMC
8-19
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
Procedure
...................................................................................................................................................................................................
Select System Management Network Time Protocol option from the menu bar.
Figure 8-14 NTP Config - with Disabled Server Synchronization
The NTP config tab contains the Time and Date and Network Time Protocol panels.
...................................................................................................................................................................................................
The Time and Date panel allows to manually set the system date and time by means of
six combo-boxes Year, Month, Day, Hour, Minute and Sec. This command is not allowed
if NTP is enabled as shown in Figure 8-15, NTP Config - with Enabled Server
Synchronization (p. 8-21).
...................................................................................................................................................................................................
Click Save to save the settings and Refresh to refresh the page.
....................................................................................................................................................................................................................................
1646 SMC
8-20
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Current NTP Server Synchronization - The time synchronization from the NTP
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
8-21
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
Cancel allows to leave the page without applying the previously selections.
...................................................................................................................................................................................................
Use this procedure to modify the various network interface parameters on a specified
DCC channel on an optical port for data communication purposes. The network interface
must be first provisioned on the line or section DCC of the specific STMn facility. The
DCC is identified as STMn and the DCCCHNL parameter.
Procedure
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
8-22
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Click the radio button to select the previously created DCC Channel entries from the
table.
Table 8-7
Parameters
Description
Access Identifier
DCC Channel
LINE
SECTION
Layer 2
OSI Protocol
USER
NETWORK
OSI Area
ENABLE
DISABLE
Specifies which OSI Area the addressed DCC belongs to. The default
value is 1
...................................................................................................................................................................................................
Click Save to store all the settings and click Create to configure a new DCC Channel as
shown in the following figure.
....................................................................................................................................................................................................................................
1646 SMC
8-23
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Select the AID type from the combo-box to filter DCC Channel that the user wants to
configure.
...................................................................................................................................................................................................
The available resources are displayed, else No configurable resources found message is
displayed.
...................................................................................................................................................................................................
Click Cancel to revoke all the settings and return to the previous page.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
8-24
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
...................................................................................................................................................................................................
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
8-25
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Click Save to store all the settings and return to the previous page.
...................................................................................................................................................................................................
Click Cancel to revoke all the settings and return to the previous page.
E...................................................................................................................................................................................................
N D O F S T E P S
Table 8-8
Filter by parameters
Parameter
Description
IP Address:
Subnet mask:
This is the entry box for subnet mask of the network the NE
is connected to (value range [128-255]-[0-255]-[0-255]-[0255]). The mask, in binary representation, must contain a
contiguous string of 1s (the network portion) and a
contiguous string of 0s (the host portion).
....................................................................................................................................................................................................................................
1646 SMC
8-26
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Click Save link to store the settings and return back to the previous page.
E...................................................................................................................................................................................................
N D O F S T E P S
Use this procedure to configure the IP Routing and enter (add) a new static IP route in the
IP routing table.
Procedure
The panel displays the existing IP route entry along with its attributes.
...................................................................................................................................................................................................
Click Create hyperlink to configure a new IP route as displayed in Figure 8-22, IP route
creation (p. 8-27).
Figure 8-22 IP route creation
....................................................................................................................................................................................................................................
1646 SMC
8-27
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
Table 8-9, IP Routing panel parameters (p. 8-28) provides description of the IP route
panel parameters.
Table 8-9
Parameter
Description
Access Identifier
Access Identifier, it specifies the facility carrying the DCC with the next
hop network interface or identifies the IP Tunnel or Customer LAN. The
select hyperlink allows to open the window shown in Figure 8-23, AID
Type Selection (p. 8-28) for the selection of the resource. After the
selection procedure, the chosen value will be reported
Destination Address
This is the IP address of the destination host or network (in the format
nnn-nnn-nnn-nnn). The address 0-0-0-0 is used to specify a default
route. If NETMASK is not all '1' (that is, a network route is specified),
the host portion of the DESTADDR must be all '0'
Subnet Mask
This is the IP subnet mask of the route (in the format nnn-nnnnnn- nnn).
The mask 0-0-0-0 is used to specify a default route
Metric
This is the cost metric of the route. The valid range is 1- 65535
Status
...................................................................................................................................................................................................
Enter the Access Identifier for the new IP route. Click Select hyperlink to choose the AID
type. The values are DCC, NE IPT, and LAN as shown in Figure 8-23, AID Type
Selection (p. 8-28).
Figure 8-23 AID Type Selection
...................................................................................................................................................................................................
Select one of the radio button to choose the AID value and click Send hyperlink, the
choice are added in the relevant field of the previous page. Close hyperlink allows to
leave the window.
...................................................................................................................................................................................................
Enter the Destination Address and Subnet mask for the IP route to be configured.
....................................................................................................................................................................................................................................
1646 SMC
8-28
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Enter the Metric value and set the Advertise value to either Y or N.
...................................................................................................................................................................................................
Click Save & Exit to save the settings and return to the window.
...................................................................................................................................................................................................
Click Save to store the settings and return to the previous panel.
...................................................................................................................................................................................................
Click Cancel to revoke all the settings and return to the previous page.
E...................................................................................................................................................................................................
N D O F S T E P S
This option retrieves the parameters of a configured OSI AREA that the NE is part of.
It contains the following two sub-menu options:
OSI NE Area
OSI OS Address
Select Communication Network Domain OSI Mng OSI NE Area option from the
menu bar. The OSI area panel is displayed as shown in Figure 8-24, OSI Area (p. 8-29).
Figure 8-24 OSI Area
....................................................................................................................................................................................................................................
1646 SMC
8-29
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Table 8-10, OSI area panel parameters (p. 8-30) provides description of OSI NE area
parameters.
Table 8-10
Parameter
Description
OSI AREA
Level 3 Initial
Domain Part
Level 3 Domain
Format Identifier
Assigns the domain format identifier field of the manual area address (2
hexadecimal characters)
Level 3
ORGanization
Level 3 Reserved
Level 3 Routing
Assigns the routing domain and routing area within the routing domain
of the manual area address (8 hexadecimal characters)
Level 3 System
Identifier
...................................................................................................................................................................................................
The Save hyperlink closes the page and return back to the previous page.
E...................................................................................................................................................................................................
N D O F S T E P S
Select Communication Network Domain OSI Mng OSI OS Address option from
the menu bar. The OS Address panel is displayed as shown in Figure 8-25, OS Address
(p. 8-30).
Figure 8-25 OS Address
....................................................................................................................................................................................................................................
1646 SMC
8-30
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Table 8-11, OS Address panel parameters (p. 8-31) provides description of the OS
address parameters.
Table 8-11
Parameter
Description
Operating System
Main Address
Spare Address
...................................................................................................................................................................................................
The Save hyperlink closes the page and returns back to the previous page.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
8-31
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Select the available STMn Signal from the combo-box for which the user wants to
configure a Linear MSP.
...................................................................................................................................................................................................
...................................................................................................................................................................................................
Linear Multiplex Section Protection Provision panel parameters are described in the
following table.
Table 8-12
Parameters
Description
FFP Access
Identifier
Protection Type
Revertive Mode
Revertive Delay
Time (min)
Indicates the Hold off time in milliseconds. The valid range is 010000.
Protected Access
Identifier
Protecting Access
Identifier
Protection Switching
Direction
....................................................................................................................................................................................................................................
1646 SMC
8-32
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Click Select to choose the Protected Access Identifier and Protecting Access
Identifier.
...................................................................................................................................................................................................
Click Save to store all the settings and return to the previous page.
...................................................................................................................................................................................................
Click Cancel to revoke all the settings and return to the previous page.
E...................................................................................................................................................................................................
N D O F S T E P S
Select the available STMn Signal from the drop-down list for which the user wants to
configure a MS-SP.
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
8-33
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Parameters
Description
FFP Access
Identifier
Protection Type
Revertive Mode
Revertive Delay
Time (min)
Indicates the Hold off time in milliseconds. The valid range is 010000.
East Access
Identifier
The East and West Access identifiers should have the same data rates.
West Access
Identifier
The East and West Access identifiers should have the same data rates.
Node Identifier
Node Descriptor
...................................................................................................................................................................................................
Click Save to store all the settings and return to the previous page.
....................................................................................................................................................................................................................................
1646 SMC
8-34
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Click Cancel to revoke all the settings and return to the previous page.
E...................................................................................................................................................................................................
N D O F S T E P S
The Link Aggregation function is an extension of the MAC layer which allows grouping
of a set of physical Ethernet interfaces into one logical interface with greater capacity and
reliability. The Link Aggregation Group (LAG) is valid only as a link between two
systems (called the Partners). Grouping of more interfaces linking one system with two or
more Partners is not allowed.
Permitted port rates to be aggregated are 1 Gbps and 10 Gbps (10 Mbps and 100 Mbps
are for future release). The max number of ports (LAG-size) to be aggregated is 16; (LAG
stands for Link Aggregation Group). Links may be anytime added or removed to/from the
bundle. Ports to be aggregated can be either located on the same board and also on
different boards.
Its management in the network is based upon the communication, between the aggregate
partner pieces of equipment, of LACP messages (Link Aggregation Control Protocol).
The LACP packets transport information about set-up, aggregation capability, links
failures, automatic reconfiguration after failure, etc.
The benefits of Link Aggregation feature are:
All involved ports must be Local (remote ports are not allowed).
Actor and Partner ports (local and far sides) must be of the same type.
Create LAG
....................................................................................................................................................................................................................................
1646 SMC
8-35
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Click LAG Group from the Tree area. The Link Aggregation Mng window is displayed.
Figure 8-29 Link aggregation management
...................................................................................................................................................................................................
The Link Aggregator Creation panel parameters are described in the following table.
Table 8-14
Parameter
Description
Name
Allows to set the name of the LAG; the only suffix after # can be set by
the user, with an integer in the 1 to 123 range
Admin State
This item can be set only after creation, in Configure Aggregator option.
The values are:
User Label
Size
Allows to set the size of the LAG, i.e. number of Aggregated Ports;
possible values are integers in the 1 to 16 range.
Allows to indicate the LAG Key, the parameter identifying this LAG;
integer in the 1 to 65535 range.
....................................................................................................................................................................................................................................
1646 SMC
8-36
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
Table 8-14
(continued)
Parameter
Description
EthClient Type
Actor System
Priority
Allows to indicate the LAG Priority. This parameter, together with the
LAG Mac-Address, forms the System Identifier. The lowest System
Identifier value is elected as the Master of the link, i.e. the one that will
drive the actions in case of events such as failures, switches, etc. The
valid range is 0 to 65535.
Type
Maximum MRU
LACP Enabled
...................................................................................................................................................................................................
Click Save hyperlink that applies the users operation in this page.
...................................................................................................................................................................................................
Select the LAG# from the LAG table to select any previously created LAG and Select
Configuration to configure the existing LAG.
E...................................................................................................................................................................................................
N D O F S T E P S
Configure LAG
...................................................................................................................................................................................................
Click on LAG# from the tree area or select the LAG and select the Configuration
hyperlink.
....................................................................................................................................................................................................................................
1646 SMC
8-37
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
8-38
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
See Table 8-14, Link aggregation parameters (p. 8-36) for Link Aggregator
Configuration panel parameters description.
...................................................................................................................................................................................................
Client Type Management panel contains the EthClient Type parameter that indicates the
The Link Aggregator Configuration panel parameters are described in the following
table.
Table 8-15
Parameter
Description
Mac Address
Partner System Id
Partner Operator
Key
Indicates the current operational value of the Key for LAG (in Partner
System); in case of Active LAG, Partner Admin key = Partner Oper key.
Partner System
Priority
N. Selected Ports
N. Attached Ports
Primary Port
Primary Port
Position
It is the port index number in the Link Aggregation Group used to send
BPDUs and flooding frames
...................................................................................................................................................................................................
Click Save & Continue to save the settings and configure another LAG.
...................................................................................................................................................................................................
Click Save & Exit to save the settings and exit from the window.
....................................................................................................................................................................................................................................
1646 SMC
8-39
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Click Cancel to cancel all the settings and return to the previous window.
E...................................................................................................................................................................................................
N D O F S T E P S
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
8-40
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
8-41
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Click Select hyperlink to select the Actor Admin key and the following window pops up.
Figure 8-34 Actor Admin key selection window
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
8-42
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Click Save & exit to save all the changes and exit from the window.
Note: If the member is not the first one, the saved settings are fine. If the member
which is removed is the first one, the following window pops up.
Figure 8-36 LAG pop up window
....................................................................................................................................................................................................................................
1646 SMC
8-43
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
When to use
Use this procedure to retrieve general system level and global system configuration
information.
Procedure
...................................................................................................................................................................................................
Select Equipment System Information option from the menu bar. The Zero
Installation Craft (ZIC) terminal displays the system level information.
The System Information panel is displayed.
Figure 8-37 System Information
...................................................................................................................................................................................................
Parameter
Description
Node Type
Software
System Type
Release ID
Release Date
Matrix Size
Status
Region
Provision Mode
User Label
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
8-44
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
Select Communication Network Domain IP Routing option from the menu bar.
The following table displays the existing IP route entry along with its attributes.
Figure 8-38 IP Routing Configuration
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
8-45
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
IP routing parameters
Parameter
Description
Access Identifier
Specifies the STMn facility carrying the DCC with the next hop network
interface or identifies the IP Tunnel or Customer LAN. The select
hyperlink allows to open the window shown in following figure for the
selection of the resource. After the selection procedure, the chosen value
will be reported.
Destination Address
This is the IP address of the destination host or network (in the format
nnn-nnn-nnn-nnn). The address 0-0-0-0 is used to specify a default
route. If NETMASK is not all '1' (i.e., a network route is specified), the
host portion of the DESTADDR must be all '0'.
....................................................................................................................................................................................................................................
1646 SMC
8-46
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
Table 8-17
IP routing parameters
(continued)
Parameter
Description
Subnet Mask
This is the IP subnet mask of the route (in the format nnn-nnnnnn- nnn).
The mask 0-0-0-0 is used to specify a default route.
...................................................................................................................................................................................................
Enter the Access Identifier for the new IP route. Click Select hyperlink to choose the
AID type. The values are DCC, NE IPT, and LAN.
...................................................................................................................................................................................................
Enter the Destination Address and Subnet mask for the IP route to be configured.
...................................................................................................................................................................................................
Click Save & Exit to save the settings and return to the window.
...................................................................................................................................................................................................
Click Save to store the settings and return to the previous panel.
...................................................................................................................................................................................................
Click Cancel to revoke all the settings and return to the previous page.
E...................................................................................................................................................................................................
N D O F S T E P S
Use this procedure to create an IP tunnel instance on the NE. The IP tunnel that has to be
created is specified by its AID.
Procedure
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
8-47
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
NE IP tunnel parameters
Parameter
Description
AID
REMOTE NSAP
(TL1 SID of the IP Tunnel target NE.) The Target NE must be reachable
via OSI over DCC and the NSAP address corresponding to this TID
must be able to be retrievable from the TARP cache. The values are:
<1-20 VALID TID CHARACTERS> or <1-20 VALID TID
CHARACTERS>. If the value contains non-alphanumeric characters, it
has to be enclosed in double quotes
Encapsulation Type
Specifies the encapsulation type for the NE. The values are: ALU or
GRE.
...................................................................................................................................................................................................
Select the encapsulation type from the drop-down list box and click Save to create new IP
tunnel.
...................................................................................................................................................................................................
Click Close to revoke all the settings and return to the previous page.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
8-48
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Click Save to store the settings and return to the previous panel.
E...................................................................................................................................................................................................
N D O F S T E P S
Select Tools FTP Server Configuration option from the menu bar.
Result: The available FTP server configuration details if any, are displayed.
....................................................................................................................................................................................................................................
1646 SMC
8-49
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Table 8-19
Parameter
Description
Host
Port
Path
...................................................................................................................................................................................................
Click Save to store the settings and return to the previous panel.
...................................................................................................................................................................................................
Click Cancel to revoke all the settings and return to the previous page.
E...................................................................................................................................................................................................
N D O F S T E P S
....................................................................................................................................................................................................................................
1646 SMC
8-50
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Glossary
...................................................................................................................................................................................................................................
AIS
Visible or audible signal indicating that an equipment failure or significant event/condition has
occurred.
Alarm Severity
An attribute that defines the priority of the alarm message. The way in which alarms are processed
depends on the severity.
APS
Backup
The backup and restoration features provide the capability to recover from loss of network
element data because of such factors as human error, power failure, and network element design
flaws.
BITS
CBS
Committed Burst Size is the maximum burst size (byte) with high priority guaranteed for the
Tunnel/Pseudowire packets deliver.
CFM
Customer Interface
CIR
Committed Information Rate is the maximum rate (kb/sec) with high priority guaranteed for the
Tunnel/Pseudowire packets delivery.
....................................................................................................................................................................................................................................
1646 SMC
GL-1
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Glossary
....................................................................................................................................................................................................................................
Circuit
DCC
ESD
Electro Static Discharge. Static electrical energy potentially harmful to circuit packs and humans.
...................................................................................................................................................................................................................................
FDB
Filtering Database. The filtering database maintains a dynamic list of paths to which packets are
routed based on the destination address. The database entries are created, updated, and removed
by the learning process.
FLC
GB
Gigabytes.
GUI
Graphical User Interface. This interface supports applications that consist of a series of
rectangular presentation regions called windows. Each window displays another application.
...................................................................................................................................................................................................................................
HKP
HouseKeeping
...................................................................................................................................................................................................................................
ID
Identifier
ISID
Glossary
....................................................................................................................................................................................................................................
ITU
LAC
A method of combining a group of IEEE 802.3 Ethernet links into a single logical link of up to the
aggregate rate.
...................................................................................................................................................................................................................................
MA
Maintenance Association.
MAC
Maintenance Domain.
MEG
Maintenance Point.
MTU
....................................................................................................................................................................................................................................
1646 SMC
GL-3
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Glossary
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................................................
NE
Network Interface.
Node
A node or network element is defined as all equipment that is controlled by one-system controller.
NTP
OSS
Path
A logical connection between the point at which a standard frame format for the signal at the
given rate is assembled, and the point at which the standard frame format for the signal is
disassembled.
PBS
Peak Burst Size is the maximum burst rate allowed (byte) for the Tunnel/Pseudowire.
PDU
Provider Instance Port. The set of Virtual Instance ports that are supported by a single instance of
the Internal sub-layer service.
PIR
Ring
....................................................................................................................................................................................................................................
1646 SMC
GL-4
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Glossary
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................................................
S-VID
Basic rack assembly unit; contains subassemblies (usually circuit packs, also referred to as
modules).
SNCP
TDM
UNI
User-Network Interface.
...................................................................................................................................................................................................................................
VCG
XFP
ZIC
Zero Installation Craft Terminal. A NE-embedded graphical user interface application for local
operation and maintenance.
....................................................................................................................................................................................................................................
1646 SMC
GL-5
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Glossary
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
GL-6
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Index
A alarm, 6-1
LAG, 8-35
configure, 8-37
.............................................................
cutoff, 6-4
create, 8-35
provision, 6-1
resynch., 6-5
.............................................................
audit, 7-12
M MAC, 8-18
.............................................................
B bridge
configure, 4-13
.............................................................
U user
.............................................................
information, 7-2
N NTP, 8-19
.............................................................
.............................................................
.............................................................
O OAM
conventions, xxiii
.............................................................
D DB management
MA, 4-20
MD, 4-19
MEP, 4-23
.............................................................
set, xxiii
S security, 7-1
.............................................................
IP routing, 8-27
.............................................................
L LAC, 8-16
....................................................................................................................................................................................................................................
1646 SMC
IN-1
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011
Index
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1646 SMC
IN-2
3KC18036ABABTQZZA Release 2.1
Issue 1 July 2011