Escolar Documentos
Profissional Documentos
Cultura Documentos
1
Click on the Desired Brace Geometry
Determine the geometry of a door opening in chevron bracing with or without a shear link
Determine the geometry of a Determine the geometry of door opening in "V" bracing a door opening in diagonal with or without a shear link bracing with or without a shear link
Comments? Questions? Visit us online at www.aisc.org/ASKAISC or contact us at solutions@aisc.org or toll free at 866.ASK.AISC
This spreadsheet has been prepared in accordance with information made available to the American Institute of Steel Construction, Inc., AISC Marketing, LLC, and the Steel Solutions Center, LLC at the time of its preparation. While it is believed to be accurate, it has not been prepared for conventional use as an engineering or construction document and should not be used or relied upon for any specific application without competent professional examination and verification of its accuracy, suitability and applicability by a licensed engineer, architect or other professional. AISC, AISCM, and SSC disclaim any liability arising from information provided by others or from the unauthorized use of the information contained in this spreadsheet.
Bay Width =
24 ft
t = 8 in
Link Length 2 ft
Centerline
Detail A
Door Height
8 ft
Story Height
10 ft
Bay Width =
Link Length
24 ft
2 ft
Brace Lengths
B
Door Height
14.14
15.62
Story Height
10 ft
8 ft
45 deg
39.81 deg
Bracing Angles
Centerline
d = 12 in
Centerline
Detail A
Detail B
Bay Width =
24 ft ft
t = 8 in
Link Length 2 ft
Centerline
Detail A
Brace Length
B
24.17
Story Height
Door Height
A
10 ft
ft
8.41 ft
Centerline
Door Width 6 ft
d = 12 in
Detail B
Note: The effect of gusset plates is not considered in these calculations. Door Height = 8.41 ft