Escolar Documentos
Profissional Documentos
Cultura Documentos
CALCULATION SHEET
Resolve.ro
Calculation No.
CALCULATION NUMBER
Project No.
PROJECT NUMBER
Calc. By Author Date today Date today
Project Name
Lap length
Checked By Checker
Lap length
Materials
Concrete class fctk,0.05= Reinforcement
40 30 80 a= 50 bar type= bent or hooked cd= 25 fyk= fyd= 400 347.826087 1.15
= c= c1 =
mm mm mm mm mm MPa MPa
gs=
600
mm
The design lap length must exceed l0,min l0,min max{0.3*6*lb,rqd;15*;200 mm}= 5.574136 1 mm MPa 1.794 ct*fctk,0.05/c= 1
'good' conditions sd is the design stress of the bar at the position from where the anchorage is measured from
600 mm
2.25*1*2*fctd= fctd= 1= 2=
per EN 1992-1-1 - expression (3.16) ct - recommended value is 1.0 c - 1.5 for persistent and transient design situations
0.92
Bars in compression 1= 1 2= 1
1
cross-sectional area of the transverse reinforcement along the design achorage length lbd are of one lapped bar
5=
0.7 p= 1.00 =
5= 110 MPa
6=
25
the percentage of reinforcement lapped within 0.65l0 from the centre of the lap length considered
References: EN 1992-1-1:2004 - Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings
92-1-1
measured from