This experiment to know the polymer material, knowing the properties of polymers, thermoplastics and thermosets differentiate. There are two types of polymers are glue gun and polyester by heating the two polymers, the observed changes in both the polymer and the polymer tested with reflection test. From the experimental data we can conclude that a is a thermoplastic polymer as softened when heated, low melting point and can be reshaped. While thermoset polymer B is due to the nature of the thermoset is hard
This experiment to know the polymer material, knowing the properties of polymers, thermoplastics and thermosets differentiate. There are two types of polymers are glue gun and polyester by heating the two polymers, the observed changes in both the polymer and the polymer tested with reflection test. From the experimental data we can conclude that a is a thermoplastic polymer as softened when heated, low melting point and can be reshaped. While thermoset polymer B is due to the nature of the thermoset is hard
This experiment to know the polymer material, knowing the properties of polymers, thermoplastics and thermosets differentiate. There are two types of polymers are glue gun and polyester by heating the two polymers, the observed changes in both the polymer and the polymer tested with reflection test. From the experimental data we can conclude that a is a thermoplastic polymer as softened when heated, low melting point and can be reshaped. While thermoset polymer B is due to the nature of the thermoset is hard
Name of Sudent : Revi Adikharisma Student I D : 2412 105 021 Major : Engineering Physics Assistant : Nur Ulfa Hidayatullah Abstract Polymer is defined as a substance consisting of molecules that include a series of one or more than one monomer unit. The purpose of this experiment to know the polymer material, knowing the properties of polymers, thermoplastics and thermosets differentiate. In the experiment, there are two types of polymers are glue gun and polyester by heating the two polymers, the observed changes in both the polymer and the polymer tested with reflection test. From the experimental data we can conclude that A is a thermoplastic polymer as softened when heated, low melting point and can be reshaped. While thermoset polymer B is due to the nature of the thermoset is hard, hardens when heated, can not melt when heated and can not be reshaped.
Macromolecular Chemistry—9: Specially Invited and Selected Symposium Lectures Presented at the International Symposium on Macromolecules Held in Aberdeen, Scotland, 10—14 September 1973