The document discusses powershift transmissions and drivepaths in 3rd and 4th gear for machines with 4-wheel drive. It notes that for machines before serial number 415012, the 4-wheel drive clutch is spring-loaded in the 'on' position to engage 4WD, while after that number the clutch must be pressurized to select 4WD. It also states that for machines up to serial number 409435, selecting 4th gear automatically engages the 2-wheel drive clutch.
Descrição original:
JCB 4cx TRANSMISSION
Gear selection, clutch and solenoids
The document discusses powershift transmissions and drivepaths in 3rd and 4th gear for machines with 4-wheel drive. It notes that for machines before serial number 415012, the 4-wheel drive clutch is spring-loaded in the 'on' position to engage 4WD, while after that number the clutch must be pressurized to select 4WD. It also states that for machines up to serial number 409435, selecting 4th gear automatically engages the 2-wheel drive clutch.
The document discusses powershift transmissions and drivepaths in 3rd and 4th gear for machines with 4-wheel drive. It notes that for machines before serial number 415012, the 4-wheel drive clutch is spring-loaded in the 'on' position to engage 4WD, while after that number the clutch must be pressurized to select 4WD. It also states that for machines up to serial number 409435, selecting 4th gear automatically engages the 2-wheel drive clutch.
Clutches Engaged Solenoids Active F - Forward Low Ratio F - Forward Low G - Mainshaft G - Mainshaft K - 2/4 wheel drive (see note) Note: Powershift transmissions installed in machines prior to serial number 415012 have the 4-wheel drive clutch spring loaded in the 'on' position to give 4WD, as shown at K. On machines after serial number 415012, the clutch must be pressurised to select 4WD. Refer to pages F/3-6 to F/3-9 for a description of the 4-wheel drive clutch operation. Figure 4 - 4th GEAR FORWARD (4 Wheel Drive) Clutches Engaged Solenoids Active E - Forward High Ratio E - Forward High G - Mainshaft G - Mainshaft K - 2/4 Wheel Drive Note that when 4th gear is selected, the 2/4 wheel drive clutch solenoid K is automatically energised, which therefore places the transmission in 2 wheel drive (only applicable on machines up to serial number 409435). Refer also to the note above. 6 - 4 Section F Transmission 9803/3260 Section F 6 - 4 Issue 2* Descriptions * * *