End Problems Chapter 3. Problem 1: 3.6 3.8 3.11 3.12 Problem 2: There is an ideal transformer as shown in figure. Submit Output Waveform for input signal given in part a and b.
a) Simulate the above circuit using Simulink/ MATLAB, and calculate voltage waveform for output load (R=100 Ohm) when input voltage is as shown in figure below.
b) Do same process as in part a), but input is shown as given below.
Problem 3: Simulate, using Simulink/ Matlab, a Single phase Rectifier with Ls= 1 mH, Id=10 A, as shown in figure below.
Submit waveforms for 1. Output Voltage 2. Input Current 3. Line Inductor Voltage
Problem 4: Simulate, using Simulink/ Matlab, a single Phase bridge rectifier circuit with RL load (R=1 Ohm and L = 0.2 H) and a small line inductance (Ls= 1 mH). Submit waveforms for 1. Load Current 2. Load Inductor Voltage 3. Voltage across RL Load 4. Line inductor Voltage