Você está na página 1de 2

CONFIDENTAL

ASSIGNMENT

Reinforced Concrete I
KAS 2292

Name :
Matrix No :
Semester :


























FK/KAS2292/ASSIGNMENT
CONFIDENTAL/ 2
QUESTION

A floor system consisting of a solid in-situ reinforced concrete slab cast integrally with the support
beams is supported over four span of 5.0 m as shown in figure 1.

(a) design suitable reinforcement for typical beam T-section to satisfy flexure and shear,
(b) check the suitable of a typical T-section with respect to deflection,
(c) determine the transverse reinforcement required for the flanges of the T-beams
(d) prepare a sketch indicating all reinforcement; use the simplified rules indicated in
Clause 3.12 and Figure 3.24 for curtailment.

Design Data:
Characteristic dead load (excluding self-weight + finishes) g
k
= 12 kN/m
2

Characteristic dead load due to finishes only g
k
= 1.0 kN/m
2

Characteristic imposed load q
k
= 5.0 kN/m
2

Concrete grade f
cu
= 40 N/mm
2

Characteristic strength of reinforcing steel f
y
= 460 N/mm
2

Exposure condition = mild
Fire resistance = 1 hr minimum
Slab thickness h
f
= 300 mm
Rib width b
w
= 300 mm
Overall depth h = 600 mm
Span of main beams L = 5.0 m
Centres of main beams L = 4.0 m
Bar size for main steel beam (Tension) = 25 mm
Bar size for main steel beam (Compression) = 16 mm
Bar size for links beam = 8 mm
Bar size for slab = 16 mm






Figure 1

Você também pode gostar