Escolar Documentos
Profissional Documentos
Cultura Documentos
Final Examination
May 07, 2014
Name: ______________________________
285 kips
Problem 1 of 3:
The steel beam-column shown is part of a braced frame and is
subjected to the indicated axial load and end moments. The loads
and moments are based on service loads consisting of 55% Dead
Load and 45% Live Load. Select the lightest W10-shape using
A572 Grade 50 steel by solving the steps below. Bending is about
the strong axis.
M2=130 ft-k
L=13
M1 = 100 ft-k
285 kips
Problem 2 of 3:
Determine the design strength in compression, cPn , for
a column, made of A588 steel, with the built-up cross
section that consists of four 3/8 6-in Plates (PL, see
figure). The column has an effective length KL = 12 ft 8
in. Use elastic modulus E = 29,000 ksi.
Problem 3 of 3:
(a) Using the Alignment Chart, determine the effective length factors K for columns IJ, FG, and
GH. Assume the frame is subject to sidesway (sidesway uninhibited).
(b) Determine the designed compressive strength cPn of those three columns. Use Fy = 50 ksi.
W18 35
W10 54
W10 33
W2144
C
W1039
W2462
W10 33
B
W21 50
W10 54
W2144
W10 45
W1039
W2462
W1049
24 ft
30 ft
12 ft
W10 77
12 ft
14 ft