Escolar Documentos
Profissional Documentos
Cultura Documentos
August 2014
The following policy applies to all accreditation bodies accrediting testing laboratories domiciled
in Qatar that provide services for Ashghal projects.
Ashghal recognition of a testing laboratory against the requirements of ISO/IEC Standard 17025
signifies that Accreditation Bodies (AB) that provide accreditation are confident that the
laboratory is competent and has the capability to perform all tests included in its scope. This
policy applies to tests performed either by the accredited laboratory using its own resources or
by utilizing subcontracted resources, as defined in ISO/IEC Standard 17025.
1. Initial accreditation will be awarded based on objective evidence, as determined by the AB,
that the laboratory has provided evidence of competence for all tests included in the
laboratorys requested scope of accreditation. Evidence of competence shall be based on
the AB assessors completing the following:
Actual test witnessing, under limited circumstance and upon agreement with Ashghal,
the following assessment procedures could be applied:
o Simulation test witnessing (testing actual specimen(s) not provided by a customer,
but simulating the actual test)
o Demonstration test witnessing (achieved by demonstrating the operation of
equipment and the testing process without performing an actual test).
2. Re-assessments shall be conducted at a minimum of once per year covering at least 1/3 of
each laboratorys accredited scope.
3. In a 3-year period all tests included in the scope of accreditation shall have been reassessed by the AB at least once.
4. Initial accreditation and annual re-assessments will be announced assessments.
5. Once per year, the AB shall conduct one unannounced assessment of each accredited
laboratory.
6. Scope expansion shall be considered as an initial assessment, with the exception that a full
management system assessment is not required. Some level of management system
components may be assessed depending on the nature of the scope expansion.
7. Laboratories shall complete and submit to each AB the following form prior to initial
accreditation assessment, re-assessment and/or scope expansion:
Standard
Title of
Location Test Equipment/
No./Method Standard/
/Facility Instrumentation
/ issue date Method
Used (name/ID
Used/Section
No.)
Names of
Approved
Operators/
Technicians
Date of
Comments
performance
of last test
under this
standard
8. Where available and appropriate to each laboratorys scope of accreditation, the results of
Proficiency Tests (PT) or Inter-laboratory Comparisons (ILC), shall be available for review by
the AB assessors during the initial assessment for all tests related to Ashghal scope(s). In
case of the unavailability of PT or ILC for a specific test, the laboratory should apply any of
the other alternatives of ISO/IEC 17025, section 5.9, Assuring the quality of test and
calibration results. After initial accreditation, PT or ILC tests or any of the other alternatives
of section 5.9, covering 1/3 of the laboratorys scope should follow the annual reassessment plan.
9. ABs shall provide to Ashghal an assessment plan/agenda prior to assessments. The
assessment plan/agenda shall include assessment dates, names of assessors, timetable
and tests to be witnessed.
10. Ashghal reserves the right to be present during any ABs assessment of laboratories
operating under this policy.
11. AB certificates of accreditation shall include in the accredited scope the full description of
the applicable standards/methods and the relevant sections (i.e., standard number, version
and title).
Note: For environmental testing scopes the following information must be included in the
certificate of accreditation: Specific testing and quality control procedures and matrices
(materials tested) based on the requirements of the latest edition of Standard Methods for
the Examination of Water & Wastewater, APHA.
12. Findings identified during Ashghal inspections of accredited laboratories shall be resolved
by ABs as equivalent to their own findings during a subsequent assessment of the
laboratory.
13. ABs shall provide to Ashghal a list of their approved assessors (including their C.V.) used for
the assessments covered under this policy.
14. ABs providing accreditation services under this policy should indicate to Ashghal their
management/technical personnel to act as contact point(s) to facilitate communication
between the AB and Ashghal for the successful implementation of this policy.
15. Transition Policy: Existing accredited laboratory shall complete a re-assessment (according
to clause 2 of this policy) no later than one calendar year from their last accreditation
assessment.
Table of Contents
No.
Section
Page No.
Soil Tests
Aggregate Tests
Concrete Tests
11
13
16
Steel Tests
21
Geotechnical Tests
22
Environmental Tests
25
10
31
11
33
12
34
36
No.
Section
Page No.
67
Materials Tests
Environmental Tests
67
96
104
Local Laboratories
Abroad Laboratories
1. Soil Tests
QEL
Pioneer
Teyseer
1.2
BS 1377
Part 2: Sec. 4.3
1.3
BS 1377
Part 2: Sec. 4.5
1.4
BS 1377
Part 2: Sec. 5
1.5
BS 1377
Part 2: Sec. 9.2
1.6
BS 1377
Part 2: Sec. 9.3
1.7
BS 1377
Part 4
:Sec.3.5/3.6
1.8
Determination of California
Bearing Ratio (CBR)
BS 1377
Part4: Sec. 7
1.9
BS 1377
Part 9: Sec. 2.1
1.10
BS 1377
Part 9: Sec. 2.2
ALBARAHA
QIL
QGEC
Tech Lab
Fugro
Gulf Lab
BS 1377
Part 2: Sec. 3.2
Standard
DTL
ACTS
Determination of Moisture
Content (Oven Drying)
Test
TEL
ACES
1.1
No.
ITL
Exova
Laboratory
3
QSD/LL/SO/F11
-
Soil Tests (Cont.)
Exova
ACES
ACTS
Gulf Lab
Tech Lab
QIL
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
ALBARAHA
Laboratory
1.11
BS 1377
Part 9: Sec. 2.5
1.12
Determination of Organic
Matter Content
BS 1377
Part 3: Sec. 3
1.13
BS 1377
Part 3: Sec. 7.2
1.14
BS 1377
Part 3: Sec. 7.3/5.5
1.15
BS 1377
Part 3: Sec. 5.3/5.5
1.16
BS 1377
Part 3: Sec. 5.2
1.17
BS EN 933
Part 8
1.18
ASTM D2419
1.19
BS 1924
Part 2
No.
Standard
Test
Note: It is the responsibility of the Engineer and Consultant to ensure the materials testing laboratory proposed by the Contractor is totally independent and has no
relationship, inclusive of formal, financial, family or legal, or other with the Contractor or the Contractors Sub-contractors.
:
4
QSD/LL/SO/F11
2. Aggregate Tests
No.
Test
Standard
Exova
ACES
ACTS
Gulf Lab
Tech Lab
QIL
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
ALBARAHA
Laboratory
2.1
BS 812
Part 102
2.2
BS 812
Part 109: Sec.6
2.3
BS EN 1097
Part 6
2.4
BS 812
Part 25.3
2.5
BS 812
Part 25.4
2.6
BS 812
Part 25.5
2.7
ASTM C128
2.8
ASTM C127
2.9
2.10
BS EN 933
Part 1
BS 812
Part 103.1-7.2
2.11
BS 812
Part 103.1-7.3
2.12
ASTM C136
5
QSD/LL/AG/F11
-
Aggregate Tests (Cont.)
Exova
ACES
ACTS
Gulf Lab
Tech Lab
QIL
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
ALBARAHA
Laboratory
2.13
BS EN 933
Part 1
2.14
ASTM C117
2.15
BS EN 933
Part 1
2.16
ASTM C142
2.17
Lightweight Particles
ASTM C123
2.18
ASTM C40
* *
2.19
2.20
Flakiness Index
2.21
Flakiness Index
2.22
Flakiness Index
2.23
2.24
Elongation Index
2.25
2.26
No.
Test
Standard
BS EN 933
Part 7
BS EN 933
Part 3
ASTM D4791
BS 812
Part 105.1
BS EN 933
Part 4
BS 812
Part 105.2
Elongation Index
ASTM D4791
ASTM C131
6
QSD/LL/AG/F11
-
Aggregate Tests (Cont.)
Exova
ACES
ACTS
Gulf Lab
Tech Lab
QIL
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
ALBARAHA
Laboratory
2.27
ASTM C535
2.28
ASTM C88
2.29
BS 812
Part 110
2.30
BS 812
Part 111
2.31
BS 812
Part 112
2.32
BS EN 1744
Part 5
2.33
BS 812
Part 117
2.34
BS 812
Part 117-App. C
2.35
BS 812
Part 118
2.36
BS EN 1744
Part 1: Sec 12
No.
Test
Standard
Note: It is the responsibility of the Engineer and Consultant to ensure the materials testing laboratory proposed by the Contractor is totally independent and has no relationship,
inclusive of formal, financial, family or legal, or other with the Contractor or the Contractors Sub-contractors.
:
7
QSD/LL/AG/F11
3. Concrete Tests
Exova
ACES
ACTS
Gulf Lab
Tech Lab
QIL
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
ALBARAHA
Laboratory
ASTM C31
BS EN 12350
Part 1
3.3
ASTM C172
3.4
BS EN 12390
Part 2
3.5
ASTM C1064
3.6
BS EN 12390
Part 7
3.7
BS EN 12390
Part 1
3.8
BS EN 12390
Part 3
3.9
ASTM C39
3.10
ASTM C617
3.11
ASTM C1231
3.12
ASTM C42
No.
Test
3.1
3.2
Standard
8
QSD/LL/CO/F11
-
Concrete Tests (Cont.)
Exova
ACES
ACTS
Gulf Lab
Tech Lab
QIL
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
ALBARAHA
Laboratory
3.13
BS EN 12504
Part 1
3.14
ASTM C1218
3.15
3.16
BS 1881
Part 124 Sec. 10.2
BS 1881
Part 124 Sec. 10.3
3.17
ASTM C1152
3.18
ASTM C1202
3.19
NT Build 492
3.20
3.21
BS EN 12390
Part 8
BS 1881
Part 122
3.22
BS 1881
Part 208
3.23
ASTM C231
3.24
ASTM C173
3.25
Slump Test
BS EN 12350
Part 2
No.
Test
Standard
9
QSD/LL/CO/F11
-
Concrete Tests (Cont.)
Exova
ACES
ACTS
Gulf Lab
Tech Lab
QIL
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
ALBARAHA
Laboratory
ASTM C143
BS EN 12350
Part 5
ASTM C138
Sampling of Shotcrete
ASTM C1385
ASTM C900
ASTM C1688
No.
Test
3.26
Slump Test
3.27
3.28
3.29
3.30
3.31
Standard
3.32
ASTM C1701
3.33
ASTM C1611
3.34
BS EN 12350
Part 9
3.35
BS EN 12350
Part 10
3.36
ASTM C1621
Note: It is the responsibility of the Engineer and Consultant to ensure the materials testing laboratory proposed by the Contractor is totally independent and has no relationship,
inclusive of formal, financial, family or legal, or other with the Contractor or the Contractors Sub-contractors.
:
10
QSD/LL/CO/F11
DTL
Fugro
QGEC
ALBARAHA
BS EN 771
Part 1
4.2
BS EN 771
Part 1
4.3
BS 6073
Part 1
4.4
BS EN 772
Part 1
4.5
EN 771
Part 3
4.6
Measurement of Dimensions of
Kerbs
BS EN 1340
Annex C
4.7
BS EN 1340
Annex E
4.8
BS EN 1340
Annex F
4.9
BS EN 1338
Annex E
4.10
BS EN 1338
Annex F
4.11
BS EN 1339
Appendix F
Test
Standard
Exova
4.1
No.
ITL
Teyseer
Pioneer
QEL
QIL
Tech Lab
Gulf Lab
ACTS
ACES
TEL
Laboratory
11
QSD/LL/MA/F11
-
Masonry Blocks and Paving Units Tests (Cont.)
Exova
ACES
ACTS
Gulf Lab
Tech Lab
QIL
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
ALBARAHA
Laboratory
4.12
BS EN 1339
Appendix E
4.13
Measurement of Dimensions of
Paving Blocks
BS 6717
Annex A
4.14
BS 6717
Annex B
4.15
ASTM C140
4.16
BS EN 13748
Part 1-Sec.5.5/5.8
No.
Test
Standard
Note: It is the responsibility of the Engineer and Consultant to ensure the materials testing laboratory proposed by the Contractor is totally independent and has no relationship,
inclusive of formal, financial, family or legal, or other with the Contractor or the Contractors Sub-contractors.
:
12
QSD/LL/MA/F11
QIL
QEL
Pioneer
Teyseer
5.2
ASTM C183
5.3
Determination of Strength of
Cement
BS EN 196
Part 1
5.4
Compressive Strength of
Cement Mortars
ASTM C349
5.5
BS EN 196
Part 2Cl. 13.14
5.6
BS EN 196
Part 2Cl. 13.15
5.7
BS EN 196
Part 2Cl. 13.11
5.8
BS EN 196
Part 2Cl. 13.10
* *
5.9
Loss on Ignition
5.10
5.11
ITL
QGEC
Gulf Lab
BS EN 196
Part 7
Standard
Fugro
ACTS
Test
DTL
ACES
5.1
No.
TEL
Exova
Laboratory
BS EN 196
Part 2Cl. 7
BS EN 196
Part 2Cl. 13.2&3
BS EN 196
Part 2Cl. 13.6
13
QSD/LL/CE/F10
-
Cementitious Materials Tests (Cont.)
Standard
Exova
ACES
ACTS
Gulf Lab
Tech Lab
QIL
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
Laboratory
BS EN 196
Part 2Cl. 13.9
BS EN 196
Part 2Cl. 17
BS EN 196
Part 3
5.15
Determination of Soundness of
Cement
BS EN 196
Part 3
5.16
ASTM C191
5.17
ASTM C187
5.18
BS EN 196
Part 5
5.19
Chloride Content
BS EN 196
Part 21Cl. 4
5.20
BS EN 196
Part 21
5.21
BS EN 196
Part 6
5.22
ASTM C989
No.
Test
5.12
5.13
Alkalies Content
5.14
14
QSD/LL/CE/F10
-
Cementitious Materials Tests (Cont.)
Exova
ACES
ACTS
Gulf Lab
Tech Lab
QIL
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
Laboratory
5.23
ASTM C1240
5.24
ASTM D5759
5.25
ASTM C311
5.26
ASTM C1012
No.
Test
Standard
Note: It is the responsibility of the Engineer and Consultant to ensure the materials testing laboratory proposed by the Contractor is totally independent and has no
relationship, inclusive of formal, financial, family or legal, or other with the Contractor or the Contractors Sub-contractors.
:
15
QSD/LL/CE/F10
6.7
6.8
6.9
Determination of Void
Characteristics
6.10
6.11
Temperature Measurement
6.12
Determination of Dimensions of
Specimen
6.13
Marshal Test
6.14
Laboratory Mixing
ALBARAHA
QGEC
6.6
Fugro
DTL
6.5
TEL
ITL
6.4
Teyseer
Pioneer
6.3
QEL
QIL
6.2
Tech Lab
Sampling of Asphalt
Gulf Lab
6.1
Standard
ACTS
Test
ACES
No.
Exova
Laboratory
BS EN 12697
Part 27
BS EN 12697
Part 28
BS EN 12697
Part 30
BS EN 12697
Part 1
ASTM D2172
BS EN 12697
Part 2
BS EN 12697
Part 5
BS EN 12697
Part 6
BS EN 12697
Part 8
BS EN 12697
Part 9
BS EN 12697
Part 13
BS EN 12697
Part 29
BS EN 12697
Part 34
BS EN 12697
Part 35
16
QSD/LL/AS/F11
-
Road and Pavement Tests (Cont.)
Teyseer
ITL
TEL
DTL
Fugro
QGEC
ALBARAHA
QEL
QIL
Tech Lab
Gulf Lab
ACTS
ACES
Exova
BS EN 1426
ASTM D5
BS EN 1427
ASTM D36
Test
6.15
6.16
6.17
6.18
6.20
BS EN 12697
Part 36
BS EN 12697
Part 39
No.
6.19
Pioneer
Laboratory
Standard
6.21
ASTM D2171
6.22
ASTM D2726
6.23
ASTM D70
6.24
ASTM D2041
6.25
ASTM D3549
6.27
6.28
BS 3262
Part 1Ap. C
BS 2000-58
BS 3262
Part 1Ap. D
* *
17
QSD/LL/AS/F11
-
Road and Pavement Tests (Cont.)
Exova
ACES
ACTS
Gulf Lab
Tech Lab
QIL
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
ALBARAHA
Laboratory
AASHTO T250
BS 3262
Part 3Ap. C
BS 2000-35
BS 3262
Part 1Ap. H
6.33
BS 3262
Part 1Ap. D
6.34
6.35
Measurement of Retro-reflectivity of
pavement marking materials
BS 6088
Appendix B
BS EN 1436
Annex A&B
6.36
Measurement of Retro-reflectivity of
pavement marking materials
ASTM E1710
6.37
6.38
6.39
6.40
6.41
BS 3262
Part 1Ap. J
BS 3262
Part 1Ap. G
BS 3262
Part 1Ap. F
BS 3262
Part 3Ap. B
BS EN 13197
Annex C
6.42
ASTM D4414
No.
Test
6.29
6.30
Determination of Density of
Thermoplastic Material
6.31
6.32
Standard
18
QSD/LL/AS/F11
-
Road and Pavement Tests (Cont.)
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
ALBARAHA
6.44
ASTM D6648
AASHTO T313
ASTM D7175
AASHTO T315
ASTM D6521
AASHTO R28
ASTM D2872
AASHTO T240
ASTM D7405
AASHTO TP70
Tech Lab
Gulf Lab
ASTM D4402
AASHTO T316
Standard
ACTS
Test
ACES
6.43
No.
Exova
QIL
Laboratory
6.45
6.46
6.47
6.48
6.49
ASTM D92
6.50
ASTM D95
6.51
ASTM D2042
19
QSD/LL/AS/F11
-
Road and Pavement Tests (Cont.)
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
ALBARAHA
BS EN 12697
Part 23
Tech Lab
Gulf Lab
ACTS
AASHTO TP79
Standard
ACES
Test
Exova
No.
QIL
Laboratory
6.53
Note: It is the responsibility of the Engineer and Consultant to ensure the materials testing laboratory proposed by the Contractor is totally independent and has no relationship,
inclusive of formal, financial, family or legal, or other with the Contractor or the Contractors Sub-contractors.
:
20
QSD/LL/AS/F11
7. Steel Tests
Standard
Exova
ACES
ACTS
Gulf Lab
Tech Lab
QIL
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
Laboratory
BS EN 10002
Part 1
7.2
ASTM A370
7.3
Bend Test
BS 4449
Sec. 7.2.5
7.4
Rebend Test
BS 4449
Sec. 7.2.5
7.5
BS 131
Part 1
7.6
ASTM E23
7.7
BS EN 10045
No.
Test
7.1
Note: It is the responsibility of the Engineer and Consultant to ensure the materials testing laboratory proposed by the Contractor is totally independent and has no relationship,
inclusive of formal, financial, family or legal, or other with the Contractor or the Contractors Sub-contractors.
:
21
QSD/LL/ST/F11
8. Geotechnical Tests
Gulf Lab
Tech Lab
QIL
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
BS 1377
Part 7-Sec. 8
8.3
ASTM D5731
8.4
ASTM D4543
8.5
ASTM D7012
8.6
BS 1377
Part 5-Sec. 3
8.7
ASTM D2435
8.8
BS 1377
Part 7-Sec. 4
8.9
BS 1377
Part 7-Sec. 5
8.10
ASTM D5607
Test
Standard
ACES
BS 5930
Section 6
No.
Exova
ACTS
Laboratory
Laboratory Tests
8.1
8.2
22
QSD/LL/GE/F11
-
Geotechnical Tests (Cont.)
No.
Test
Standard
Exova
ACES
ACTS
Gulf Lab
Tech Lab
QIL
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
Laboratory
8.11
ASTM D4546
8.12
BS 1377
Part 5-Sec. 5
8.13
BS 1377
Part 7-Sec. 3
Field Tests
8.14
Soil Sampling
BS 5930
Cl. 22
8.15
BS 5930
Cl. 23
8.16
BS 5930
Cl. 23, 27, 47
8.17
BS 5930
Cl. 25
8.18
Packer Test
BS 5930
Cl. 25
8.19
BS 1377
Part 9-Sec. 3.3
23
QSD/LL/GE/F11
-
Geotechnical Tests (Cont.)
Standard
ACTS
Gulf Lab
Tech Lab
QIL
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
Test
ACES
No.
Exova
Laboratory
ASTM G57
8.20
8.21
BS 1377
Part 9-Sec. 4.1
8.22
BS 1377
Part 9-Sec. 4.3
8.23
ASTM D6951
Notes:
Other tests related to geotechnical field can be found in soil and aggregate tests sections.
This list is for geotechnical related tests. General requirements for geotechnical soil investigation firms should follow the Ministry of Environment conformity criteria.
It is the responsibility of the Engineer and Consultant to ensure the Materials Testing Laboratory proposed by the Contractor is totally independent and has no relationship,
inclusive of formal, financial, family or legal, or other with the Contractor or the Contractors Sub-contractors.
:
24
QSD/LL/GE/F11
9. Environmental Tests
ACES
ACTS
Gulf Lab
Tech Lab
QIL
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
Ashghal
GeoChem
APHA/AWWA 4500H+B
nd
22 Edition 2012
APHA/AWWA 2510-B
nd
22 Edition 2012
APHA/AWWA 2130 B
nd
22 Edition 2012
APHA/AWWA 2540-B
nd
22 Edition 2012
APHA/AWWA 2540-D
nd
22 Edition 2012
APHA/AWWA 2540-D
nd
22 Edition 2012
APHA/AWWA 2540-C
nd
22 Edition 2012
APHA/AWWA 2540-C
nd
22 Edition 2012
Settleable Solids
APHA/AWWA 2540-F
nd
22 Edition 2012
* *
APHA, SM,2710 D,
nd
22 Edition 2012
* *
APHA, SM,2710 D,
nd
22 Edition 2012
* *
No.
9.1
Test
pH
Standard
9.2
Electrical Conductivity
9.3
Turbidity
9.4
Total Solids
9.5
9.6
9.7
9.9
9.10
Sludge Weight
9.11
Sludge Volume
9.8
Abroad Labs
Exova
Local Labs
25
QSD/LL/EN/F11
-
Environmental Tests (Cont.)
Tech Lab
QIL
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
Ashghal
GeoChem
Gulf Lab
9.12
* *
* *
APHA/AWWA 5520 D
nd
22 Edition 2012
* *
APHA/AWWA 4500-Cl
nd
G, 22 Edition 2012
APHA/AWWA 4500-Cl
nd
I, 22 Edition 2012
Standard
APHA, SM,2710 D,
nd
22 Edition 2012
nd
APHA/AWWA 22
Edition 2012.Test5210B & 4500-OC
nd
APHA/AWWA 22
Edition 2012 Test5220 D
APHA/AWWA 4500 N
nd
22 Edition 2012
APHA/AWWA 4500 N
nd
org- 22 Edition
2012 22nd
APHA/AWWA
P
9.13
Biochemical Oxygen
Demand (BOD)
9.14
Chemical Oxygen
Demand (COD)
9.15
9.16
Total Kjeldahl
Nitrogen
Total Organic
Nitrogen
9.17
Ammonia Nitrogen
9.18
Nitrate Nitrogen
9.19
Nitrite Nitrogen
9.20
9.21
Total Chlorine
Residual Chlorine
9.22
ACES
Test
Exova
No.
Abroad Labs
ACTS
Local Labs
26
QSD/LL/EN/F11
-
Environmental Tests (Cont.)
Sulphate
9.30
Sulphide
9.31
Fluoride
9.32
Iron
Total Hardness
* *
9.33
GeoChem
9.29
Ashghal
Sulphate
9.28
QGEC
Cyanide
9.27
Fugro
Phenol Concentrations
DTL
9.26
TEL
ITL
Phosphorous ( total)
Teyseer
9.25
Pioneer
Chloride
QEL
9.24
QIL
Tech Lab
APHA/AWWA
nd
4500-Cl B, 22
nd
APHA 4110-B, 22
Edition 2012
APHA/AWWA 4500P D&C
nd
22 Edition 2012
APHA/AWWA 5530
B&C
nd
22 Edition 2012
Gulf Lab
Chloride
Standard
ACTS
9.23
Test
ACES
No.
Abroad Labs
Exova
Local Labs
27
QSD/LL/EN/F11
-
Environmental Tests (Cont.)
ACTS
Gulf Lab
Tech Lab
QIL
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
Ashghal
GeoChem
APHA/AWWA 2320nd
B, 22 Edition 2012
APHA/AWWA 2320nd
B, 22 Edition 2012
Test
9.34
Magnesium
Concentration by
calculation
9.35
Magnesium
9.36
ACES
No.
Calcium
Abroad Labs
Exova
Local Labs
Standard
APHA/AWWA
nd
3500-Mg B- 22
Edition 2012
APHA 3120-B
nd
22 Edition 2012
APHA/AWWA
3500-Ca B,
nd
22 Edition 2012
nd
APHA 3120-B, 22
Edition 2012
P
9.37
Calcium
9.38
Sodium
APHA 3120-B, 22
Edition 2012
9.39
Potassium
APHA 3120-B, 22
Edition 2012
9.40
Bromide
APHA 4110-B, 22
Edition 2012
9.41
Bromate
9.42
Total Alkalinity
nd
P
nd
P
nd
P
9.43
Phenolphthalein
Alkalinity
nd
9.44
Bicarbonate
APHA 2320-B, 22
Edition 2012
9.45
Carbonate
APHA 2320-B, 22
Edition 2012
nd
P
28
QSD/LL/EN/F11
-
Environmental Tests (Cont.)
No.
Test
Standard
ACES
ACTS
Gulf Lab
Tech Lab
QIL
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
Ashghal
GeoChem
Abroad Labs
Exova
Local Labs
9.46
Residual Pesticides
EPA 608
9.47
Organic
Hydrocarbon
APHA/AWWA/
6200 volatile
Organic
Compounds
9.48
Total Organic
Carbon (TOC)
APHA/AWWA
nd
5310-B or C, 22
Edition 2012
9.49
Total Silicates
APHA/AWWA/
4500- SiIO2-C,
nd
22 Edition 2012
9.50
Silicon, Aluminum
9.51
Heavy Metals
Concentrations
APHA/AWWA/
3111 D , Direct
Nitrous Oxide
Acetylene flame
method (AAS)
APHA/ SM/ 3120 B
Heavy Metal
Analysis by ICP
APHA/ SM/ 3110 B
Heavy Metal
29
QSD/LL/EN/F11
-
Environmental Tests (Cont.)
Tech Lab
QIL
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
Ashghal
GeoChem
Total Coliforms
* *
* *
* *
Standard
APHA/AWWA
9222B & 9222D,
nd
22 Edition 2012
APHA/AWWA
nd
9222D, 22
Edition 2012
APHA/AWWA
nd
9223B& G, 22
Edition 2012
P
9.53
Fecal Coliform
9.54
E-Coli
ACES
Gulf Lab
9.52
Test
Exova
No.
Abroad Labs
ACTS
Local Labs
9.55
Nematodes
(Helminths) Eggs
9.56
Microscopic
Examination
9.57
Pseudomonas
Aeruginosa
APHA 9213-E
nd
22 Edition 2012
Fecal Streptococcus
APHA 9230-C
nd
22 Edition 2012
APHA 9260-J
nd
22 Edition 2012
RT PCR
Methodology
9.58
Legionella
9.60
Viruses
9.59
Note: It is the responsibility of the Engineer and Consultant to ensure the materials testing laboratory proposed by the Contractor is totally independent and has no relationship, inclusive of
formal, financial, family or legal, or other with the Contractor or the Contractors Sub-contractors.
:
30
QSD/LL/EN/F11
Standard
ACTS
Gulf Lab
Tech Lab
QIL
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
Ashghal
BATLABS
Test
ACES
No.
Exova
Laboratory
ASTM D4694
ASTM E950
10.1
10.2
10.3
ASTM D7113
10.4
ASTM C805
10.5
BS 1881
Part 204
10.6
BS EN 12504
Part 4
10.7
Gauge Manual
10.8
Microscope
Manual
10.9
ASTM D5882
10.10
ASTM D6760
31
QSD/LL/ND/F10
-
Non Destructive Tests (Cont.)
Exova
ACES
ACTS
Gulf Lab
Tech Lab
QIL
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
Ashghal
BATLABS
Laboratory
10.11
ASTM D4945
10.12
ASTM D6167
10.13
ASTM D4541
* *
10.14
ASTM D7091 /
D6132
* *
10.15
ASTM D4787 /
D5162
10.16
ASTM E709 /
ASME - Sec. V
* *
10.17
ASTM E165 /
ASME - Sec. V
* *
No.
Test
Standard
Note: It is the responsibility of the Engineer and Consultant to ensure the materials testing laboratory proposed by the Contractor is totally independent and has no relationship,
inclusive of formal, financial, family or legal, or other with the Contractor or the Contractors Sub-contractors.
:
32
QSD/LL/ND/F10
QIL
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
TBWIC
11.4
Tech Lab
11.3
Gulf Lab
11.2
Standard
ACTS
11.1
Test
ACES
No.
ASTM E84
BS EN 1634
Part 1
BS EN 1364
Part 1
BS EN 1364
Part 3 & 4
BS 476
Part 22
Abroad Labs
Exova
Local Labs
11.5
11.6
ASTM E814
11.7
ASTM E2226
11.8
BS EN
13501
Part 2
Note: It is the responsibility of the Engineer and Consultant to ensure the materials testing laboratory proposed by the Contractor is totally independent and has no relationship, inclusive of formal,
financial, family or legal, or other with the Contractor or the Contractors Sub-contractors.
:
33
QSD/LL/FR/F06
ACES
ACTS
Gulf Lab
Tech Lab
QIL
QEL
Pioneer
Teyseer
ITL
TEL
Fugro
DTL
Fugro
QGEC
TBWIC
Abroad Labs
Exova
Local Labs
12.1
ASTM E283
12.2
ASTM E330
12.3
ASTM E331
12.4
BS EN 1026
12.5
BS EN 1027
12.6
BS EN 12211
12.7
BS EN 12153
12.8
BS EN 12155
No.
Test
Standard
34
QSD/LL/LK/F04
-
Leakage Testing of Buildings (Cont.)
ACES
ACTS
Gulf Lab
Tech Lab
QIL
QEL
Pioneer
Teyseer
ITL
TEL
DTL
Fugro
QGEC
TBWIC
Abroad Labs
Exova
Local Labs
12.9
BS EN
12179
12.10
BS EN
13829
12.11
AAMA 501.1
12.12
AAMA 501.2
No.
Test
Standard
Note: It is the responsibility of the Engineer and Consultant to ensure the materials testing laboratory proposed by the Contractor is totally independent and has no relationship, inclusive of formal,
financial, family or legal, or other with the Contractor or the Contractors Sub-contractors.
:
35
QSD/LL/LK/F04
Laboratory
ACES
Project
Development of Roads in
Bani Hajer Zone 51
Field
1. Soil Tests
Test
Determination of Moisture
Content (Oven Drying)
BS 1377
Part 2: Sec. 3.2
BS 1377
Part 2: Sec. 9.3
BS 1377
Part 2: Sec. 4.3
BS 1377
Part 2: Sec. 4.5
BS 1377
Part 2: Sec. 5
2. Aggregate Tests
Standard
BS 1377
Part 9: Sec. 2.5
BS 812
Part 102
BS EN 933
Part 1 / ASTM C117
BS EN 933
Part 1
Determination of Specific
Gravity and Water Absorption of
Fine Aggregate
ASTM C128
Determination of Specific
Gravity and Water Absorption of
Coarse Aggregate
ASTM C127
36
Laboratory
ACES
Project
Development of Roads in
Bani Hajer Zone 51
Field
2. Aggregate Tests
Particle Size
Distribution (Wet)
Particle Size
Distribution
3. Concrete Tests
4. Asphalt Tests
Test
Standard
BS 812
Part 103.1-9.2
ASTM C136
Sampling of Fresh
Concrete
BS EN 12350
Part 1
BS EN 12390
Part 2
Slump Test
BS EN 12350
Part 2
Density of Hardened
Concrete
BS EN 12390
Part 7
BS EN 12390
Part 1
ASTM C1064
Compressive Strength
of Concrete Specimens
BS EN 12390
Part 3
Sampling of Asphalt
BS EN 12697
Part 27
Preparation of Samples
for Testing
BS EN 12697
Part 28
Specimen Preparation
by Impact Compactor
BS EN 12697
Part 30
BS EN 12697
Part 1
37
Laboratory
ACES
Project
Field
Development of Roads in
Bani Hajer Zone 51
4. Asphalt Tests
Test
Standard
Marshal Test
BS EN 12697
Part 34
Particle Size
Distribution
BS EN 12697
Part 2
Determination of Bulk
Density
BS EN 12697
Part 6
Determination of Void
Characteristics
BS EN 12697
Part 8
38
Laboratory
ACES
Project
Development of Roads in
Block 1300
Field
1. Soil Tests
Test
Standard
Determination of Moisture
Content (Oven Drying)
BS 1377
Part 2: Sec. 3.2
BS 1377
Part 2: Sec. 9.2
BS 1377
Part 2: Sec. 9.3
Dry Density/Moisture
Content Relationship
Determination of Liquid
Limit (Casagrande
Method)
2. Aggregate Tests
BS 1377
Part 4 :Sec.3.5/3.6
BS 1377
Part 2: Sec. 4.5
Determination of Plastic
Limit and Plasticity Index
BS 1377
Part 2: Sec. 5
BS 1377
Part 9: Sec. 2.5
Determination of
California Bearing Ratio
(CBR)
BS 1377
Part4: Sec. 7
BS 1377
Part 9: Sec. 2.1
Determination of Moisture
Content (Oven Drying)
BS 812
Part 109: Sec.6
Sampling of Aggregates
(From Heaps)
BS 812
Part 102
BS 812
Part 103.1-9.2
39
Laboratory
ACES
Project
Development of Roads in
Block 1300
Field
3. Concrete Tests
4. Asphalt Tests
Test
Sampling of Fresh
Concrete
BS EN 12350
Part 1
BS EN 12390
Part 2
Slump Test
BS EN 12350
Part 2
Density of Hardened
Concrete
BS EN 12390
Part 7
BS EN 12390
Part 1
ASTM C1064
Compressive Strength of
Concrete Specimens
BS EN 12390
Part 3
BS EN 12697
Part 27
BS EN 12697
Part 28
Specimen Preparation by
Impact Compactor
BS EN 12697
Part 30
BS EN 12697
Part 1
Sampling of Asphalt
Marshal Test
Particle Size Distribution
Determination of Bulk
Density
Standard
BS EN 12697
Part 34
BS EN 12697
Part 2
BS EN 12697
Part 6
40
Laboratory
ACES
Project
Field
Development of Roads in
Block 1300
4. Asphalt Tests
Test
Standard
Determination of Void
Characteristics
BS EN 12697
Part 8
Determination of
Thickness of Specimen
BS EN 12697
Part 36
Determination of
Dimensions of Specimen
BS EN 12697
Part 29
ASTM D2041
41
Laboratory
ACES
Project
Doha Express Way
Package 12 F Ring Road
Field
1. Soil Tests
Test
Determination of Moisture
Content (Oven Drying)
BS 1377
Part 2: Sec. 3.2
BS 1377
Part 2: Sec. 9.2
BS 1377
Part 2: Sec. 9.3
BS 1377
Part 4 :Sec.3.5/3.6
BS 1377
Part 2: Sec. 4.5
BS 1377
Part 2: Sec. 5
2. Aggregate Tests
Standard
Determination of Moisture
Content (Oven Drying)
BS 1377
Part 9: Sec. 2.5
BS 1377
Part4: Sec. 7
BS 1377
Part 9: Sec. 2.2
ASTM D2419
BS 812
Part 109: Sec.6
Sampling of Aggregates
(From Heaps)
BS 812
Part 102
BS 812
Part 103.1-9.2
42
Laboratory
ACES
Project
Doha Express Way
Package 12 F Ring Road
Field
2. Aggregate Tests
Test
Material Finer than 0.075
mm
BS EN 933
Part 1 / ASTM C117
BS EN 933
Part 1
Determination of Specific
Gravity and Water
Absorption of Fine
Aggregate
ASTM C128
Determination of Specific
Gravity and Water
Absorption of Coarse
Aggregate
ASTM C127
Determination of Ten
Percent Value
Clay Lumps and Friable
Particles
BS 812
Part 111
ASTM C142
Flakiness Index
BS EN 933
Part 3 / ASTM D4791
Elongation Index
BS EN 933
Part 3 / ASTM D4791
Magnesium Sulphate
Soundness
Standard
ASTM C88
43
-
ACES
3. Concrete Tests
4. Asphalt Tests
Sampling of Fresh
Concrete
BS EN 12350
Part 1
BS EN 12390
Part 2
Slump Test
BS EN 12350
Part 2
Density of Hardened
Concrete
BS EN 12390
Part 7
BS EN 12390
Part 1
ASTM C1064
Compressive Strength of
Concrete Specimens
BS EN 12390
Part 3
Sampling of Asphalt
BS EN 12697
Part 27
Preparation of Samples
for Testing
BS EN 12697
Part 28
Specimen Preparation by
Impact Compactor
BS EN 12697
Part 30
BS EN 12697
Part 1
BS EN 12697
Part 34
BS EN 12697
Part 2
BS EN 12697
Part 6
44
Laboratory
ACES
Project
Doha Express Way
Package 12 F Ring Road
Field
4. Asphalt Tests
Test
Standard
Determination of Void
Characteristics
BS EN 12697
Part 8
Determination of
Thickness of Specimen
BS EN 12697
Part 36
Determination of
Dimensions of Specimen
BS EN 12697
Part 29
ASTM D2041
45
Laboratory
ACES
Project
Lusail Express Way
Package 01-P003
Field
1. Soil Tests
Test
Determination of Moisture
Content (Oven Drying)
BS 1377
Part 2: Sec. 3.2
BS 1377
Part 2: Sec. 9.2
BS 1377
Part 2: Sec. 9.3
Dry Density/Moisture
Content Relationship
Determination of Liquid
Limit (Casagrande Method)
BS 1377
Part 4 :Sec.3.5/3.6
BS 1377
Part 2: Sec. 4.5
Determination of Plastic
Limit and Plasticity Index
BS 1377
Part 2: Sec. 5
BS 1377
Part 9: Sec. 2.5
Determination of California
Bearing Ratio (CBR)
BS 1377
Part4: Sec. 7
BS 1377
Part 9: Sec. 2.2
2. Aggregate Tests
Standard
Determination of Moisture
Content (Oven Drying)
ASTM D2419
BS 812
Part 109: Sec.6
Sampling of Aggregates
(From Heaps)
BS 812
Part 102
BS 812
Part 103.1-9.2
46
Laboratory
ACES
Project
Lusail Express Way
Package 01-P003
Field
2. Aggregate Tests
3. Concrete Tests
Test
Standard
BS EN 933
Part 1 / ASTM C117
BS EN 933
Part 1
Flakiness Index
BS EN 933
Part 3 / ASTM D4791
Elongation Index
BS EN 933
Part 3 / ASTM D4791
Sampling of Fresh
Concrete
BS EN 12350
Part 1
BS EN 12390
Part 2
Slump Test
BS EN 12350
Part 2
Density of Hardened
Concrete
BS EN 12390
Part 7
BS EN 12390
Part 1
ASTM C1064
Compressive Strength of
Concrete Specimens
BS EN 12390
Part 3
47
Laboratory
ACES
Project
Lusail Express Way
Package 01-P003
Field
4. Asphalt Tests
Test
Standard
Sampling of Asphalt
BS EN 12697
Part 27
Preparation of Samples
for Testing
BS EN 12697
Part 28
Specimen Preparation by
Impact Compactor
BS EN 12697
Part 30
BS EN 12697
Part 1
Marshal Test
BS EN 12697
Part 34
BS EN 12697
Part 2
Determination of Bulk
Density
BS EN 12697
Part 6
Determination of Void
Characteristics
BS EN 12697
Part 8
Determination of
Thickness of Specimen
BS EN 12697
Part 36
Determination of
Dimensions of Specimen
BS EN 12697
Part 29
ASTM D2041
48
Laboratory
ACES
Project
Dukhan Highway Central
Contract
Field
1. Soil Tests
Test
Determination of Moisture
Content (Oven Drying)
BS 1377
Part 2: Sec. 3.2
BS 1377
Part 2: Sec. 9.2
BS 1377
Part 2: Sec. 9.3
BS 1377
Part 4 :Sec.3.5/3.6
BS 1377
Part 2: Sec. 4.3
BS 1377
Part 2: Sec. 5
BS 1377
Part4: Sec. 7
2. Aggregate Tests
Determination of Moisture
Content (Oven Drying)
Sampling of Aggregates (From
Heaps)
Particle Size Distribution (Wet)
Standard
BS 1377
Part 9: Sec. 2.2
ASTM D2419
BS 812
Part 109: Sec.6
BS 812
Part 102
BS 812
Part 103.1-9.2
Determination of Specific
Gravity and Water Absorption of
Coarse Aggregate
ASTM C127
Determination of Specific
Gravity and Water Absorption of
Fine Aggregate
ASTM C128
49
Laboratory
ACES
Project
Dukhan Highway Central
Contract
Field
2. Aggregate Tests
Test
Material Finer than 0.075 mm
Material Finer than 0.063 mm
BS EN 933
Part 3 / ASTM D4791
Elongation Index
BS EN 933
Part 3 / ASTM D4791
BS EN 933
Part 1 / ASTM C117
BS EN 933
Part 1
Flakiness Index
3. Concrete Tests
Standard
ASTM C142
ASTM C131 / ASTM
C535
BS 812
Part 111
ASTM C88
BS EN 12350
Part 1
BS EN 12390
Part 2
BS EN 12350
Part 2
BS EN 12390
Part 7
BS EN 12390
Part 1
ASTM C1064
BS EN 12390
Part 3
50
Laboratory
ACES
Project
Dukhan Highway Central
Contract
Field
4. Asphalt Tests
Test
Standard
Sampling of Asphalt
BS EN 12697
Part 27
Preparation of Samples
for Testing
BS EN 12697
Part 28
Specimen Preparation by
Impact Compactor
BS EN 12697
Part 30
BS EN 12697
Part 1
Marshal Test
BS EN 12697
Part 34
BS EN 12697
Part 2
Determination of Bulk
Density
BS EN 12697
Part 6
Determination of Void
Characteristics
BS EN 12697
Part 8
Determination of
Thickness of Specimen
BS EN 12697
Part 36
Determination of
Dimensions of Specimen
BS EN 12697
Part 29
51
Laboratory
Tech-Lab
Project
Salwa Road
Field
1. Soil Tests
Test
Determination of Moisture Content (Oven Drying)
BS 1377
Part 2: Sec. 3.2
BS 1377
Part 2: Sec. 9.2
BS 1377
Part 2: Sec. 9.3
BS 1377
Part 4 :Sec.3.5/3.6
BS 1377
Part 2: Sec. 4.3
BS 1377
Part 2: Sec. 5
BS 1377
Part4: Sec. 7
BS 1377
Part 9: Sec. 2.1
BS 1377
Part 9: Sec. 2.2
BS 1377
Part 9: Sec. 2.5
2. Aggregate Tests
Standard
BS 812
Part 102
BS 812
Part 103.1-9.2
BS 812
Part 25.3
BS 812
Part 25.4
BS 812
Part 25.5
52
Laboratory
Tech-Lab
Project
Salwa Road
Field
3. Concrete Tests
4. Asphalt Tests
Test
Standard
BS EN 12390
Part 2
Slump Test
BS EN 12350
Part 2
BS EN 12390
Part 7
BS EN 12390
Part 1
ASTM C1064
Compressive Strength of
Concrete Specimens
BS EN 12390
Part 3
Sampling of Asphalt
BS EN 12697
Part 27
BS EN 12697
Part 28
BS EN 12697
Part 30
BS EN 12697
Part 1
Marshal Test
BS EN 12697
Part 34
BS EN 12697
Part 2
BS EN 12697
Part 6
53
Laboratory
Tech-Lab
Project
Salwa Road
Field
4.
Asphalt Tests
Test
Standard
Determination of
Thickness of Specimen
BS EN 12697
Part 36
Determination of
Dimensions of Specimen
BS EN 12697
Part 29
Temperature
Measurement
BS EN 12697
Part 13
Determination of
Maximum Density
BS EN 12697
Part 5
ASTM D2041
54
Laboratory
Gulf Labs
Project
Al Muntazah Street
Extension (Package 13)
Field
1. Soil Tests
Test
Determination of Moisture
Content (Oven Drying)
BS 1377
Part 2: Sec. 3.2
BS 1377
Part 2: Sec. 9.2
BS 1377
Part 2: Sec. 9.3
BS 1377
Part 4 :Sec.3.5/3.6
BS 1377
Part 2: Sec. 4.5
BS 1377
Part 2: Sec. 5
2. Aggregate Tests
Standard
BS 1377
Part 9: Sec. 2.5
Determination of California
Bearing Ratio (CBR)
BS 1377
Part4: Sec. 7
Determination of Moisture
Content (Oven Drying)
BS 812
Part 109: Sec.6
Sampling of Aggregates
(From Heaps)
BS 812
Part 102
BS 812
Part 103.1-9.2
55
Laboratory
Gulf Labs
Project
Al Muntazah Street
Extension (Package 13)
Field
2. Aggregate Tests
Test
Particle Density and Water
Absorption (10mm aggregate
and smaller)
BS 812
Part 25.5
BS 812
Part 25.4
Determination of Specific
Gravity and Water Absorption of
Fine Aggregate
ASTM C128
3.
Concrete Tests
Standard
ASTM
C131/ASTM C535
Flakiness Index
BS 812
Part 105.1
Elongation Index
BS 812
Part 105.2
Compressive Strength of
Concrete Specimens
BS EN 12390
Part 3
BS EN 12390
Part 7
BS EN 12390
Part 1
BS EN 12350
Part 1
56
Laboratory
Gulf Labs
Project
Al Muntazah Street
Extension (Package 13)
Field
3.
Concrete Tests
Test
Standard
BS EN 12390
Part 2
Slump Test
BS EN 12350
Part 2
57
Laboratory
Gulf Labs
Project
West Corridor P-010
(Package 1)
Field
1. Soil Tests
2. Aggregate Tests
Test
Particle Size Distribution
(Wet Sieving Method)
Standard
BS 1377
Part 2: Sec. 9.2
BS 1377
Part 4 :Sec.3.5/3.6
BS 1377
Part 2: Sec. 4.3
BS 1377
Part 2: Sec. 5
Determination of California
Bearing Ratio (CBR)
BS 1377
Part4: Sec. 7
ASTM D2419
BS 1377
Part 9: Sec. 2.5
BS 1377
Part 9: Sec. 2.2
BS EN 933
Part 1 / ASTM C117
BS EN 933
Part 1
ASTM C142
BS 812
Part 103.1-9.2
58
Laboratory
Gulf Labs
Project
West Corridor P-010
(Package 1)
Field
Test
Standard
2. Aggregate Tests
Determination of Specific
Gravity and Water Absorption of
Coarse Aggregate
ASTM C127
Determination of Specific
Gravity and Water Absorption of
Fine Aggregate
ASTM C128
3. Concrete Tests
ASTM
C131/ASTM C535
Flakiness Index
BS 812
Part 105.1
Elongation Index
BS 812
Part 105.2
Compressive Strength of
Concrete Specimens
BS EN 12390
Part 3
BS EN 12390
Part 7
BS EN 12390
Part 1
BS EN 12350
Part 1
BS EN 12350
Part 1
59
Laboratory
Gulf Labs
Project
West Corridor P-010
(Package 1)
Field
Test
Standard
3. Concrete Tests
BS EN 12390
Part 2
Slump Test
BS EN 12350
Part 2
BS EN 12350
Part 7
BS EN 12350
Part 5
Sampling of Asphalt
BS EN 12697
Part 27
BS EN 12697
Part 28
BS EN 12697
Part 30
BS EN 12697
Part 1
Marshal Test
BS EN 12697
Part 34
Determination of Thickness of
Specimen
BS EN 12697
Part 36
4.
Asphalt Tests
60
Laboratory
Gulf Labs
Project
West Corridor P-010
(Package 1)
Field
4. Asphalt Tests
Test
Standard
Temperature Measurement
BS EN 12697
Part 13
Determination of Maximum
Density
BS EN 12697
Part 5
BS EN 12697
Part 6
Determination of Dimensions of
Specimen
BS EN 12697
Part 29
Determination of Void
Characteristics
BS EN 12697
Part 8
61
-
Qatar Industrial
Labs
Development of Al Ruwais
Port Phase 2
1. Concrete Tests
ASTM C31
Compressive Strength of
Concrete Specimens
BS EN 12390
Part 3
ASTM C1064
BS EN 12350
Part 1
62
-
Qatar Engineering
Labs
Construction and
Maintenance of Al
Huwailah Link Road
1. Soil Tests
BS 1377
Part 2: Sec. 9.2
BS 1377
Part 2: Sec. 9.3
BS 1377
Part 4
:Sec.3.5/3.6
BS 1377
Part 2: Sec. 4.5
BS 1377
Part 2: Sec. 5
Determination of California
Bearing Ratio (CBR)
BS 1377
Part 9: Sec. 2.5
BS 1377
Part4: Sec. 7
63
-
Qatar Engineering
Labs
Construction and
Maintenance of Al
Huwailah Link Road
2. Aggregate Tests
BS EN 933
Part 1 / ASTM
C117
BS EN 933
Part 1
Determination of Moisture
Content (Oven Drying)
3. Asphalt Tests
BS 812
Part 103.1-9.2
BS 812
Part 109: Sec.6
Marshal Test
BS EN 12697
Part 34
Determination of Thickness of
Specimen
BS EN 12697
Part 36
64
Laboratory
DOHA
TECHNICAL
LABORATORIES
Project
P003-LUSAIL Expressway
Field
1.Soil Tests
Test
Particle Size Distribution
(Wet Sieving Method)
BS 1377
Part 4
:Sec.3.5/3.6
BS 1377
Part 2: Sec. 4.3
BS 1377
Part 2: Sec. 5
Determination of California
Bearing Ratio (CBR)
BS 1377
Part4: Sec. 7
Sampling of Aggregates
BS 1377
Part 2: Sec. 9.2
2.AggregateTests
Standard
BS 1377
Part 9: Sec. 2.5
BS 812
Part 102
BS EN 932
Part 1
65
-
3. Concrete Tests
BS EN 12390
Part 2
Slump Test
BS EN 12350
Part 2
BS EN 12350
Part 1
Slump Test
ASTM C143
ASTM C231
ASTM C138
BS EN 12390
Part 1
ASTM C1064
Compressive Strength of
Concrete Specimens
BS EN 12390
Part 3
66
Materials Tests
67
Aggregate Tests
Test
Test Method
BS EN 1744-1:1998
68
Test
PLASTIC LIMIT
PLASTICITY INDEX
SAMPLING OF AGGREGATE
Test Method
BS 1377 : Part 2:1990 :T5.3 AMD 9027 :
1996
BS 1377: Part2: 1990: T5.4 AMD 9027 :
1996
ASTM D75 - 09
69
Test
SIEVE ANALYSIS (DRY)
ANALYSIS OF MATERIAL BY X-RAY FLUORSCENCE
SPECTOMETRY
SIEVE ANALYSIS OF FINE AND COARSE
AGGREGATE.(WET)
LIGHT REFLECTANCE VALUE (LRV) OF A SURFACE
BULK DENSITY & VOIDS IN AGGREGATE - RODDING
BULK DENSITY & VOIDS IN AGGREGATE - JIGGING
BULK DENSITY & VOIDS IN AGGREGATE - LOOSE
SOLAR REFLECTANCE INDEX (SRI) OF MATERIALS
pH OF SOIL AND SOIL- AGG./LIGHTWEIGHT
EXPANDABLE CLAY AGG.
Test Method
BSEN 933-1 : CL.7.2 : 1997 AMD
15907 MARCH 2006
BS ISO 29581 - 2 : 2010
ASTM C 136 : CL.7.7.1 : 2006
BS 8493 : 2008 + A1 : 2010
ASTM C 29 / C 29 M : 2009 CLAUSE
10
ASTM C 29/ C 29 M : 2009, CLAUSE
11
ASTM C 29/ C 29M :2009 CLAUSE
12
ASTM E 1980:01
AASHTO T 289-91
70
Bituminous Tests
Test
PENETRATION OF BITUMINOUS MATERIALS
SAYBOLT FUROL VISCOSITY OF PETROLEUM PRODUCTS
FLASH POINT
KINEMATIC VISCOSITY OF ASPHALT
SPECIFIC GRAVITY & DENSITY OF SEMI - SOLID BITUMINOUS
MATERIAL
SOFTENING POINT OF BITUMEN
SAYBOLT FUROL VISCOSITY OF EMULSIFIED ASPHALT
VISCOSITY OF ASPHALT BY BROOKFIELD THERMOSEL
APPARATUS
RHEOLOGICAL PROPERTIES OF ASPHALT BY DYNAMIC SHEAR
WATER VAPOR TRANSMISSION OF INSULATION MATERIALS
TENSILE PROPERTIES OF BITUMEN SHEET FOR ROOF WATER
PROOFING
ACCELERATED AGING OF ASPHALT BINDER USING PAV
EFFECT OF HEAT AND AIR ON A MOVING FILM OF ASPHALT
(RTFO)
TENSILE PROPERTIES OF THIN PLASTIC SHEETING
TENSILE - TEAR STRENGTH OF MODIFIED BITUMINOUS SHEET
MATERIAL
TENSILE PROPERTIES OF FLEXIBLE SHEETS FOR BTTU. WATER
PROFING MEMBRANE
LOW TEMPERATURE FLEXIBILITY OF MODIFIED BITUMINOUS
SHEET MATERIAL
COMPOUND STABILITY OF MODIFIED BITUMINOUS SHEET
MATERIAL
Test Method
ASTM D5 - 06
ASTM D88 : 2007
ASTM D92 - 05a(Reapproved 2010) cl. 11.2
ASTM D2170 - 07
ASTM D70 : 2009
ASTM D36 / D36 M - 09
ASTM D7496-09 : cl. 7.1 PROC. B
ASTM D 4402 - 06
AASHTO TP 5
ASTM E96-00
BS EN 12311 P1 : 2000
AASHTO PP1-93
ASTM D 2872:04
ASTM D882: 2001
ASTM D5147:2002 CLAUSE 7
ASTM D4073 :1994 R98
ASTM D5147:02a CLAUSE 11
ASTM D5147:02a CLAUSE 15
71
Test
Test Method
72
Test
WATER IN PETROLEUM PTODUCTS AND BITUMINOUS MAT. BY
DISTILLATION
DUCTILITY CUTBACK ASPHALTIC PRODUCTS RESIDUE (PRIME
COAT)
SOLUBILITY OF CUTBACK ASPHALTIC PRODUCTS
RESIDUE(PRIME COAT)IN TRICHLOROETHYLENE
PENETRATION TEST ON RESIDUE OF CUTBACK MATERIAL
(PRIME COAT)
SOLUBILITY OF CUTBACK ASPHALTIC PROD. RESIDUE(TACK
COAT)IN TRICHLOROETHYLENE
DUCTILITY OF CUTBACK ASPHALTIC PRODUCTS RESIDUE
(TACK COAT)
PENETRATION TEST ON RESIDUE OF CUTBACK MATERIAL
(TACK COAT)
DISTILLATION OF CUTBACK ASPHALTIC (BITUMINOUS)
PRODUCTS
DISTILATION OF EMULSIFIED ASPHALT
FLEX.OF HOT APPLIED SEALANTS&FILLERS FOR
JOINTS&CRACKS
FLOW OF HOT APPLIED SEALANTS & FILLERS FOR JOINT &
CRACKS
ASPH.COMP. OF HOT APPLIED SEALANTS,FILLERS FOR
JOINTS&CRACKS
DUCTILITY OF SEALANTS,FILLERS FOR JOINTS & CRACKS
SOFTENING POINT OF SEALANTS,FILLERS FOR JOINTS &
CRACKS
VISC. OF SEALANTS,FILLERS FOR JOINTS&CRACKS AT
ELEVATED TEMP.
Test Method
ASTM D95-05 (R10)
ASTM D 113 -07
ASTM D 2042-09
ASTM D5 -06
ASTM D 2042-09
ASTM D 113-07
ASTM D 5 -06
ASTM D 402-08
ASTM D 6997 - 04
ASTM D 5329-09 CL.18
ASTM D 5329-09 CL.8
ASTM D 5329 - 09 CL.14
ASTM D 113 - 07
ASTM D36/D36M - 09
ASTM D 4402 - 06
73
Concrete Tests
Test
SAMPLING HARDENED CONCRETE (CORING ON FLOORS)
NORMAL CURING OF TEST SPECIMEN
COMPRESSIVE STRENGTH OF CONCRETE CUBES
WATER ABSORPTION OF HARDENED CONCRETE
SULPHATE CONTENT INHARDENED CONCRETE
CHLORIDE CONTENT IN HARDENED CONCRETE
TYPE OF CEMENT
ELECTRICAL INDICATION OF CONCRETE'S ABILITY TO
RESIST CHLORIDE IO
INITIAL SURFACE ABSORPTION OF CONCRETE
DEPTH OF PENTRATION OF WATER FOR CONCRETE
TESTING HARDENED CONCRETE: PART 3 :C/S OF TEST
SPECIMEN
SAMPLING OF FRESH CONCRETE ON SITE
SLUMP TEST OF FRESH CONCRETE
MAKING TEST CUBES FROM FRESH CONCRETE
MAKING TEST CYLINDERS FROM FRESH CONCRETE
Test Method
BS 1881 : 1983 P120 AMD6109 1989
BS 1881 : 1983 P111 AMD9387 1997
BS 1881 : 1983 P116 AMD6720 1991
BS 1881 : 1983 P122 AMD6108 1989
BS 1881 P124 : (1988 ) AD- 06
(2002)
BS 1881 P124 : (1988 ) AD- 06
(2002)
BS 1881 P124 : (1988 ) AD- 06
(2002)
ASTM C1202 : 2010
BS 1881 : P208 : 1996
BS EN 12390 - 8 :2009
BS EN 12390-3:2009
BS 1881 : 1983 P101 AMD6728 1991
BSEN 12350 - 2 : 2009
BS 1881 : 1983 P108 AMD6105 1989
BS 1881 : 1983 P110 AMD6103 1989
74
Test
MIXING & SAMPLING FRESH CONCRETE IN LAB
BLEEDING OF CONCRETE
AIR CONTENT OF FRESH CONCRETE - PRESSURE METHOD
MAKING AND CURING SPECIMENS FOR STRENGTH TESTS
SAMPLING FRESH CONCRETE
SAMPLING HARDENED CONCRETE (CORING ON FLOORS)
SAMPLING HARDENED CONCRETE ( CORING ON WALLS,
COLUMNS )
NORMAL CURING OF TEST SPECIMEN
SPLITTING TENSILE STRENGTH OF CYLINDRICAL CONCRETE
DENSITY OF HARDENED CONCRETE
COMPRESSIVE STRENGTH OF CONCRETE CORES
WATER ABSORPTION OF HARDENED CONCRETE
TRANSVERSE STRENGTH & WATER ABSORPTION FOR
TERRAZO TILES
SAMPLING PRECAST CONCRETE KERBS
MEASUREMENT OF DIMENSIONS OF PRECAST CONCRETE
KERBS
TRANSVERSE STRENGTH OF PRECAST CONCRETE KERBS
WATER ABSORPTION OF PRECAST CONCRETE KERBS
SULPHATE CONTENT INHARDENED CONCRETE
CHLORIDE CONTENT IN HARDENED CONCRETE
Test Method
BS 1881 : 1986 P125 AMD6107 1989
ASTM C 232 / C 232 M -09
BS EN 12350 -7 :2009
BS EN 12390 - 2 : 2002
BS EN 12350 - 1 : 2002
BS 1881 : 1983 P120 AMD6109 1989
BS 1881 : 1983 P120 AMD6109 1989
BS 1881 : 1983 P111 AMD9387 1997
ASTM C496/ C 496 M - 04
BS 1881 : 1983 P114 AMD6721 1991
BSEN 12504-1:2009
BS 1881 : 1983 P122 AMD6108 1989
BS 4131 : 1973 Ap. A & B
BS 7263 : 1994 P1 C14
BS 7263 : 1994 P1 Anx. A.3
BS 7263 : 1994 P1 Anx. B.2.2
BS 7263 : 1994 P1 Anx. C.2.2
BS 1881 P124 : (1988 ) AD- 06
(2002)
BS 1881 P124 : (1988 ) AD- 06
(2002)
75
Test
TYPE OF CEMENT
ANALYSIS OF MATERIAL BY X-RAY FLUORSCENCE
SPECTOMETRY
ELECTRICAL INDICATION OF CONCRETE'S ABILITY TO
RESIST CHLORIDE IO
FLEXURAL STRENGTH OF CONCRETE PRISMS
WATER VAPOR TRANSMISSION OF INSULATION MATERIALS
INITIAL SURFACE ABSORPTION OF CONCRETE
DEPTH OF PENTRATION OF WATER FOR CONCRETE
THERMAL TRANSMISSION PROPERTIES BY HEAT FLOW
METER (AAC BLOCK)
MAKING SPECIMEN FOR THERMAL CONDUCTIVTY
LIGHT REFLECTANCE VALUE (LRV) OF A SURFACE
SOLAR REFLECTANCE INDEX (SRI) OF MATERIALS
CONSISTENCY OF CEMENT
SETTING TIME OF CEMENT
SOUNDNESS OF CEMENT
CHLORIDE CONTENT OF CEMENT
ANALYSIS OF MATERIAL BY X-RAY FLUORSCENCE
SPECTOMETRY
MAKING TEST SPECIMENS - PRISMS
COMPRESSIVE STRENGTH OF CEMENT
FLEXURAL STRENGTH OF CEMENT
DETERMINATION OF FINENESS OF CEMENT
WATER REQUIREMENT OF FUEL ASH
DENSITY OF CEMENT
MOISTURE CONTENT OF FUEL ASH
STRENGTH FACTOR OF FUEL ASH
Test Method
BS 1881 P124 : (1988 ) AD- 06
(2002)
BS ISO 29581 - 2 : 2010
ASTM C1202 : 2010
BS EN 12390 : PART 5 : 2000
ASTM E96-00
BS 1881 : P208 : 1996
BS EN 12390 - 8 :2009
ASTM C-518 : 2010
BS 8493 : 2008 + A1 : 2010
ASTM E 1980:01
BS EN 196-3:2005 Clause 5
BS EN 196 - 3 : 2005 Clause 6
BS EN 196 - 3 : 2005, Clause 7
BSEN 196 -P2 : 2005
BS ISO 29581 - 2 : 2010
BS EN 196-1 : 2005
BS EN 196-1 : 2005 CLAUSE 9.2
BS EN 196-1 : 2005 CLAUSE 9.1
BS EN 196 - 6 : 1992
BS 3892 PART1:1997 ANNEX E
BS EN 196-6 NC:1992
BS 3892 PART 1:1997 ANNEX C
BS 3892 PART 1:1997 ANNEX F
76
Test
ACTIVITY INDEX OF FLY ASH
WATER REQUIRED FOR FLY ASH
ACCELERATED POZZILANIC STRENGTH ACTIVITY INDEX
WITH OPC
BULK DENSITY OF SILICA FUME
DENSITY OF SILICA FUMES
FINESS OF CEMENT BY 45 um SIEVE
MOISTURE CONTENT OF SILICA FUMES
FINENESS BY WET SIEVING
Test Method
BSEN 450 -1 : 2005
BSEN - 450 -1 : 2005
ASTM C-1240:05 CLAUSE 16
ASTM C1240.05 CLAUSE 19
ASTM C 1240 .05 CLAUSE 12
ASTM - C 430:96 (Re 2003)
ASTM C-311-2005
BSEN 451-2 : 1995
77
Masonry Tests
Test
COMPRESSIVE STRENGTH OF SOLID MASONRY
BLOCKS
COMPRESSIVE STRENGTH OF HOLLOW MASONRY
BLOCKS
COMPRESSIVE STRENGTH OF FILLER BLOCKS
DIMENSION OF SOLID MASONRY BLOCKS
DIMENSION OF HOLLOW MASONARY BLOCKS
DIMENSION OF FILLER BLOCKS
DENSITY OF BLOCKS
CHLORIDE CONTENT OF CONCRETE BLOCKS
COMPRESSIVE STRENGTH OF PAVING BLOCKS NON RECTANGULAR
COMPRESSIVE STRENGTH OF PAVING BLOCKS RECTANGULAR
DIMENSION OF PAVING BLOCKS - NON
RECTANGULAR
DIMENSION OF PAVING BLOCKS - RECTANGULAR
SAMPLING OF BLOCKS
WATER ABSORPTION OF PAVING BLOCKS
WATER ABSORPTION OF PAVING BLOCKS
Test Method
BS 6073 : 1981 P2 Ap. B AMD4508 1984
BS 6073 : 1981 P2 Ap. B AMD4508 : 1984
BS 6073 : 1981 P2 Ap. B AMD4508 1984
BS 6073 : 1981 P1 Ap. A AMD4462 1984
BS 6073 : 1981 P1 Ap. A AMD4462 1984
BS 6073 : 1981 P1 Ap. A AMD4462 - 1984
BS 6073 : 1981 P2 Ap. C AMD4508 1984
BS 1881 : 1988 P124
BS 6717 : 1993 P1 Anx. A & B
BS 6717 : 1993 P1 Anx. A & B
BS 6717 : 1993 P1 Anx. A
BS 6717 : 1993 P1 Anx. A
WI-IC-01-02
BS 1881 : 1983 P122 AMD6108 - 1989
ASTM C140 - 09 a
Test
ANALYSIS OF MATERIAL BY X-RAY FLUORSCENCE
SPECTOMETRY
MOISTURE CONTENT DETERMINATION
WATER VAPOR TRANSMISSION OF INSULATION
MATERIALS
WATER ABSORPTION
BEHAVIOR OF MATERIAL IN A VERTICAL TUBE
FURNACE AT 750 C
COMPRESSIVE STRENGTH OF BRICK AND
STRUCTURAL CLAY TILES
WATER ABSORPTION OF BRICK AND STRUCTURAL
CLAY TILES
DIMENSION OF MASONRY UNITS
COMPRESSIVE STRENGTH OF AUTOCLAVED
AERATED CONCRETE
DRY DENSITY OF AUTOCLAVED AERATED
CONCRETE
DRYING SHRINKAGE OF AUTOCLAVED AERATED
CONCRETE
DETERMINATION OF GROSS DRY DENSITY OF
MASONRY UNITS
DETERMINATION OF COMPRESSIVE STRENGTH OF
MASONRY UNIT
DETERMINATION OF NET DRY DENSITY OF
MASONRY UNITS
THERMAL TRANSMISSION PROPERTIES BY HEAT
FLOW METER (AAC BLOCK)
COMPRESSIVE STRENGTH OF MASONRY PRISM
COMPRESSIVE STRENGTH OF CONCRETE
MASONRY UNIT & RELATED UNIT
Test Method
BS ISO 29581 - 2 : 2010
ASTM C 1616 - 07
ASTM E96-00
ASTM C272 : 2001 (Reapproved 2007)
ASTM E136 : 2009
ASTM C 67-02a
ASTM C67-02A
BSEN 772-16 : 2000
BSEN 679-1994
BSEN 678-1994
BSEN 680-1994
BS EN 772 - 13 : 2000 CLAUSE 7.3
BS EN 772 - 1 : 2000 ; DMS-1 PART 1
BS EN 772 - 13 : 2000 CLAUSE 7.2
ASTM C-518 : 2010
ASTM C 1314
ASTM C140 - 09a & DMS-1: Part 4 : 2010
79
Test
DIMENSION OF CONCRETE MASONRY UNITS &
RELATED UNIT
MEASUREMENT OF ABRASION RESISTANCE (WIDE
WHEEL TEST)
LIGHT REFLECTANCE VALUE (LRV) OF A SURFACE
SOLAR REFLECTANCE INDEX (SRI) OF MATERIALS
VERIFICATION OF VISUAL ASPECT FOR PAVING
BLOCK
Test Method
ASTM C140 - 09a
BS EN 1338:2003 (E)-ANNEX G, AMD
16470-2006
BS 8493 : 2008 + A1 : 2010
ASTM E 1980:01
BS EN 1338:2003 ANNEX J/ DMS
1:PART 4 : 2011 ANNEX B
80
Rock Tests
Test
SPECIFIC GRAVITY & WATER ABSORPTION OF FINE
AGGREGATE
SOUNDNESS
LOS ANGELES ABRASION (SMALL SIZE COARSE
AGGREGATE)
LOS ANGELES ABRASION (LARGE SIZE COARSE
AGGREGATE)
PARTICLE DENSITY / WATER ABSORPTION (
COARSE AGGREGATE )
SAMPLING HARDENED CONCRETE (CORING ON
FLOORS)
SPECIFIC GRAVITY & WATER ABSORPTION OF
COARSE AGGREGATE
ANALYSIS OF MATERIAL BY X-RAY FLUORSCENCE
SPECTOMETRY
POINT LOAD STRENGTH INDEX OF ROCK
UNCONFINED COMPRESSIVE STRENGTH OF
COHESIVE SOIL USING LOAD FRAME METHOD
Test Method
ASTM C128 : 07a
ASTM C88 : 05
ASTM C131 : 2006
ASTM C535 : 2009
BS 812 : 1995 P2 T5.3, 5.4
AMD10379/r - 1999
BS 1881 : 1983 P120 AMD6109 1989
ASTM C 127 : 07
BS ISO 29581 - 2 : 2010
ASTM D5731 - 2002
BS 1377 : PART7 : CL.7.2 : 1990
81
Soils Tests
Test
INSITU CBR
CONE PENETRATION TEST (PER METER)
STANDARD PENETRATION TEST (PER METER)
INSITU DENSITY (SMALL POURING CYLINDER)
INSITU DENSITY ( LARGE POURING CYLINDER )
SIEVE ANALYSIS (WET)
SAMPLING OF SOIL FROM BOREHOLE (BY USING
STANDARD PENETRATION EQUIPMENT (PER METER)
CHLORIDE CONTENT OF SAND & AGGREGATE (
ACID SOLUBLE )
SULPHATE CONTENT OF SAND & AGGREGATE (
ACID SOLUBLE )
SPECIFIC GRAVITY & WATER ABSORPTION OF FINE
AGGREGATE
FULLY CRUSHED FACES OF AGGREGATE
PARTIALLY CRUSHED FACES OF AGGREGATE
TEN PERCENT FINES (DRY)
ELONGATION INDEX OF AGGREGATE
AGGREGATE CRUSHING VALUE
SOUNDNESS
Test Method
BS 1377 :PART9: 1990: T 4.3AMD
8264: 1995
DIN 4094 : P2 : 1980 & DIN 4094 : P1 :
1974
BS 1377:Part9 : 1990:T 3.3 AMD
8264:1995
BS 1377 :Part9: 1990:T 2.1 AMD 8264:
1995
BS1377:P9:cl.2.2:Amd 8264:95(AD09:2011)
BS 1377 : Part 2 : 1990:T 9.2 :
AMD9027:1996
BS 5930 - 1999
BS 812 : 1988 P117 " Appendix C "
BS EN 1744-1:1998
ASTM C128 : 07a
DMS - 7 : 2001(R-07)
DMS - 8 : 2001(R07)
BS 812 : 1990 P111 T7.1 (AD-04:2002)
BS 812 : 1990 P105 S105.2
BS 812 : 1990 P110 ( AD-03:2002)
ASTM C88 : 05
82
Test
LOS ANGELES ABRASION (SMALL SIZE COARSE
AGGREGATE)
LOS ANGELES ABRASION (LARGE SIZE COARSE
AGGREGATE)
LIQUID LIMIT
PLASTIC LIMIT
PLASTICITY INDEX
SAND EQUIVALENT OF SOILS & FINE AGGREGATE
FLAKINESS INDEX OF AGGREGATE
SAMPLING OF AGGREGATE
CALIFORNIA BEARING RATIO (CBR)
LINEAR SHRINKAGE
DRY DENSITY / MOISTURE CONTENT RELATIONSHIP
(4" MOULD)
DRY DENSITY / MOISTURE CONTENT RELATIONSHIP
(6" MOULD)
SIEVE ANALYSIS (WET)
SIEVE ANALYSIS (DRY)
ORGANIC MATTER CONTENT
ACID SOLUBLE SULPHATE OF SOIL
ACID SOLUBLE CHLORIDE OF SOIL
WATER SOLUBLE SULPHATE OF SOIL
PH VALUE OF SOIL
Test Method
ASTM C131 : 2006
ASTM C535 : 2009
BS 1377 : Part 2:1990 : T4.5 AMD 9027
: 1996
BS 1377 : Part 2:1990 :T5.3 AMD 9027
: 1996
BS 1377: Part2: 1990: T5.4 AMD 9027
: 1996
ASTM D2419 : 2009
BS 812 : 1989 P105 S105.1
ASTM D75 - 09
BS 1377: Part4:1990: T.7 AMD 13925 :
2002
BS 1377 : Part2: 1990: T6.5 AMD 9027:
1996
BS 1377 : Part4:1990 T.3.5 AMD 13925
: 2002
BS 1377 : Part4:1990: T. 3.6 AMD
13925 : 2002
BS 1377 : Part 2 : 1990:T 9.2 :
AMD9027:1996
BS 1377:1990 P2 T9.3
BS 1377 : P3 (1990)AMD 9028:(1996)
BS 1377 : P3 (1990)AMD 9028:(1996)
BS 1377 : P3 (1990)AMD 9028:(1996)
BS 1377 : P3 (1990)AMD 9028:(1996)
BS 1377 : P3 (1990)AMD 9028:(1996)
83
Test
DRY DENSITY / MOISTURE CONTENT RELATIONSHIP
(VIBRATING HAMMER)
SPECIFIC GRAVITY & WATER ABSORPTION OF
COARSE AGGREGATE
Test Method
BS 1377 : Part4: 1990 : T.3.7 AMD
13925 : 2002
ASTM C 127 : 07
ASTM E 1980:01
AASHTO T 289-91
84
Water analysis
Test
CHLORIDE CONTENT IN WATER
pH VALUE OF WATER
TOTAL DISSOLVED SOLIDS (TDS) OF WATER
SULPHATE CONTENT IN WATER
Test Method
ASTM D512 - 10
ASTM D1293 : 2005
BS 1377 : P3 (1990)AMD 9028:(1996)
ASTM D516 - 07
PH OF GROUND WATER
85
Test Method
BS EN ISO 11925 - 2 : 2002
BS EN 13501 -1 :2007
BS EN ISO 10545-3 : 1997 CLAUSE 5.1.1
BS EN ISO 10545-4 : 1997
BS EN 15771 : 2010
BS 8493 : 2008 + A1 : 2010
ASTM E 1980:01
BS 7976 - 2: 2002
UAE S GSO ISO 10545-2 : 2007 CLAUSE
2
UAE S GSO ISO 10545-2 :2007 CLAUSE
4
UAE S GSO ISO 10545-2 : 2007 CLAUSE
7
UAE S GSO ISO 10545-2 : 2007 CLAUSE
3
UAE S GSO ISO 10545-2 : 2007 CLAUSE
6
UAE S GSO ISO 10545-2 : 2007 CLAUSE
5
86
Test Method
ASTM D445 - 06 & ASTM
D2270 - 04
ASTM D97 - 08
ASTM D92 - 05a(Reapproved
2010)
ASTM D892 - 06
ASTM D874 - 07
ASTM D93 - 07
UAE STANDARD No. 125 :
1992
ASTM D5293 (2008)
ASTM D 2896-07a
87
Test Method
88
Test Method
BS 5480:1990
APPENDIX - H
BS 5480:1990
APPENDIX-A
BS EN ISO 9969:1995
89
Test Method
90
Test
BEND TEST FOR CARBON STEEL BAR FOR
CONCRETE
MSMT.OF THE GEOMETRICAL CHAR.&
RELATIVE RIB AREA OF STEEL BAR
MEASUREMENT OF PROJECTED RIB AREA OF DE
FORMED STEEL BAR
TENSILE STRENGTH TEST OF STEEL COUPLER
RIB MEASUREMENT OF DEFORMED STEEL BAR
TENSILE TEST OF METALLIC MATERIALS
CHEMICAL ANALYSIS OF STAINLESS STEEL BY
ATOMIC EMISSION
CHEMICAL ANALYSIS OF STAINLESS STEEL BY
ATOMIC EMISSION
Test Method
ASTM A-370-08a Annex 9
BS EN ISO 15630-1 : 2002 C10
&11
BS 4449 :1997 : ANNEX C
DMS - 024 : 2010
ASTM A 615/615M 09 CL. 8
ASTM A370 - 2010 CL. 5 TO 13
ASTM E 1086-08
ASTM E 1086-08
91
Test Method
APPARENT DENSITY
DIMENSION & DENSITY OF BLOCK & BOARD
INSULATION
MOISTURE CONTENT DETERMINATION
NON-FIBROUS (SHOT) CONTENT DETERMINATION
BINDER CONTENT DETERMINATION
DETERMINATION OF ORGANIC MATTER
WATER ABSORPTION ( 2H) THERMAL INSULTATION
THERMAL TRANSMISSION PROPERTIES BY HEAT
FLOW METER (THERMAL COND)
BULK DENSITY PREFORMED FLAT MATERIAL
(INORGANIC INSULATION)
BULK DENSITY OF PREFORMED PIPE SECTION
(INORGANIC INSULATION)
DENSITY & DIMENSION OF PREFORMED PIPE
INSULATION
LONG TERM WATER ABSORPTION BY PARTIAL
IMMERSION
LONG TERM WATER ABSORPTION BY TOTAL
IMMERSION
SHORT TERM WATER ABSORPTION BY PARTIAL
IMMERSION
WATER ABSORPTION (CELLULAR GLASS
INSULATION)
THICKNESS & DENSITY OF BLANKET & BATT
INSULATION
BS EN 1602 : 1997
ASTM C 303 : 2007
ASTM C 1616 - 07
ASTM C 1335 (04) - R09
ASTM C 1139 - 08
BS 2972 SEC 16 : METHOD 1
ASTM C 209 : 07a
ASTM C518 : 2010
BS 2972 SEC. 3 : 1989
BS 2972 SEC. 3 : 1989
ASTM C302 : 1995, PROCEDURE - 1 (R2007)
BSEN 12087 : 1997 METHOD 1A
BSEN 12087 : 1997 METHOD 2A
BSEN 1609 : 1997 METHOD A
ASTM C240 : 2008
ASTM C 167 : 1998 (R-2003)
92
Test
WATER VAPOR TRANSMISSION OF INSULATION
MATERIALS
DIMENSION STABILITY UNDER CONSTANT
NORMAL LAB CONDITIONS
MOISTURE CONTENT AS RECEIVED OF INORGANIC
INSULATION
WATER ABSORPTION (TOTAL IMMERSION) OF
INORGANIC INSULATION
WATER ABSORPTION
COARSE SHOT CONTENT OF INORGANIC
INSULATION
LENGTH AND WIDTH OF THERMAL INSULTATION
THICKNESS OF THERMAL INSULATION
COMPRESSIVE RESISTANCE OF THERMAL
INSULATION
COMPRESSIVE STRENGTH/COMPRESSIVE STRESS
AT 10% DEFORMATION
DIMENSIONAL STABILITY UNDER SPECIFIED
TEMPERATURE & HUMIDITY
BEHAVIOR OF MATERIAL IN A VERTICAL TUBE
FURNACE AT 750 C
TENSILE STRENGTH PARALLEL TO FACES OF
THERMAL INSULATION
BULK DENSITY OF GRANULAR LOOSE FILL
INSULATION
FLEXURAL STRENGTH OF INORGANIC INSULATION
THERMAL AND HUMID AGING AT SPECIFIED
CONDITION
BENDING STRENGTH OR BENDING STRESS AT
GIVEN DEFLECTION
Test Method
ASTM E96-00
BS EN 1603 : 1997 (AMD-9742:97)
BS 2972 SEC. 11 : 1989
BS 2972 SEC. 12 : 1989
ASTM C272 : 2001 (Reapproved 2007)
BS 2972 SEC. 14 : 1989
BS EN 822 : 95
BS EN 823 : 95
ASTM C165 : 2007 PROCEDURE A/B
BS EN 826 : 1996
BS EN : 1604 : 1997
ASTM E136 : 2009
BS EN - 1608 : 1997
ASTM C 520 : 2004 METHOD A
BS 2972-89, SECTION 18
ASTM D 2126 : 09
BS EN 12089-97 METHOD B,
93
Test
WATER VAPOR SORPTION OF UNFACED MINERAL
FIBER INSULATION
WORKMANSHIP, FINISH & APPEARANCE OF RCPS
THERMAL INSULATION
THERMAL TRANSMISSION PROPERTIES BY HEAT
FLOW METER (AAC BLOCK)
COMPRESSIVE STRENGTH OF RIGID CELLULAR
PLASTICS
APPARENT DENSITY OF RIGID CELLULAR PLASTICS
SAMPLING OF CONSTRUCTION MATERIALS
COMPRESSIVE STRENGTH OF POLYPROPYLENE
FLUTED BOARDS
FLEXURAL STRENGTH OF THERMAL INSULATION
MAKING SPECIMEN FOR THERMAL CONDUCTIVTY
DETERMINATION OF SQUARENESS OF THERMAL
INSULATION
DETERMINATION OF FLATNESS OF THERMAL
INSULATION
MEASURING TRUNESS AND SQUARENESS OF
INSULATION
ODOR EMISSION OF THE THERMAL INSULATION
MATERIALS
DETERMINATION OF BEHAVIOUR UNDER POINT
LOAD(THRMAL INSULATION)
BREAKING LOAD (TWO POINT) OF THERMAL
INSULATION BEAM
IGNITABILITY TEST - SINGLE-FLAME SOURCE TEST
FIRE CLASSIFICATION OF CONSTRUCTION
PRODUCTS
Test Method
ASTM C 1104/C-1104M - 00
ASTM C 578 : 2011 CL .9
ASTM C-518 : 2010
ASTM D 1621:00
ASTM D 1622 : 03
DCLD - IC - 99
DMS 18:2004
ASTM C203:2005a METHOD 1
BSEN 824 : 1995
BSEN 825 :1995
ASTM C 550-10
ASTM C 1304 - 08
BSEN 12430 : 1998
94
Test
Test Method
DMS-029 : 2012
DMS-028 : 2012
ASTM D 2863-09
ASTM D 4632:08
US EPA SW 846/8260 B
DMS : 080 : 2012
95
Environmental Tests
96
Test Method
Conductivity
APHA-2510 B
Turbidity
APHA-2130 B
pH
APHA-4500-H+
APHA-2540 D
APHA-2540 C
Total Solids
APHA-2540 B
APHA-5520 B
Total Alkalinity
APHA-2320 B
Acidity
APHA-2310 B
Total Hardness
Phosphate-Phosphorous
Determination of Total Phosphorus
Free chlorine
APHA-2340
MOOPM4rd ED. 3.2.8-A
APHA -4500-P (B,D)
APHA-4500-Cl- G
Determination of Color
APHA-2120 B
AOAC 920.194
97
Test
Test Method
Determination of monochloroamine
APHA-4500-Cl- G
Chlorides
APHA-4500-CI- B
Fluorides
APHA-4500-F- C
Determination of Fluoride( F) by
Dionex Manual
Determination of Nitrate(NO3) by
Dionex Manual
Dionex Manual
Dionex Manual
Dionex Manual
Dionex Manual
Dionex Manual
Determination of Chlorate(ClO3)
Dionex Manual
Sulfate
APHA-4110B
Sulfide
APHA-4500 S2- F
P
APHA-5220 B
APHA-5210 B
98
Test
Test Method
Total Nitrogen
T.RPARSONS
2.1,1984,APHA 4110 B
APHA-4500-NORG B,C
Ammonia Nitrogen
APHA-4500-NH3- B,C
Nitrate- Nitrogen
APHA-4110-B
Salinity
Oil & Grease
Determination of Phytopigments
Determination of Anionic Surfactants as MBAS
Determination of Petroleum Hydrocarbon
By meter
APHA-5520-B
T.R. Parsons (4.1,4.2)
APHA-5540-C
MOOP 4rd ED. SECTION
6.6,6.9
P
APHA-3030E,3120
APHA-3030E,3120
APHA-3120
APHA-3120
APHA-3120
99
Test
Test Method
APHA-3120
APHA-3120
APHA-3120
APHA-3030 E, 3111
APHA 3111
APHA-3120,VGA Manual
APHA-3120,VGA Manual
Determination of Organochlorine Pesticides in water by GC-ECDSolvent Extraction (Endrin,Dieldrin,Aldrin,p,p DDT, o,p DDT,
,Lindane,Trifluralin,Chlordane,Alachlor,Pendemethalin,Methoxychlor)
APHA-6630-B
100
Test
Test Method
E-
APHA-9223 B
BSI BS 6068 SECTION 4.4:1989
APHA-9215 A & B
EPA-Method 1623
101
Test Method
Chemical Analyses
Determination of pH
APHA-4500-H+
Determination of Conductivity
APHA-2510 B
Determination of Turbidity
APHA-2130 B
TDS/EC Meter
APHA-2340
APHA-4500-NH3- B, C
(21th edition)
Determination of Fluoride( F)
Dionex manual
Determination of Nitrate(NO3)
Determination of Nitrate(NO3)
Dionex manual
Dionex manual
Dionex manual
Dionex manual
Dionex manual
Dionex manual
Determination of Chlorate(ClO3)
Dionex manual
102
Test
Determination of Silver (Ag) by ICP-OES
Determination of Arsenic (As) by ICP-OES
Determination of Cadmium (Cd), Manganise (Mn)
Determination of Lead ( Pb)
Determination of Calcium (Ca), Magnesium (Mg) , Iron (Fe)
Determination of Metals ( Zn ,Ni ,Cr,Cu,Mo,Na,Ba,K)
Determination of Colour
Test Method
APHA 3120
APHA -2120 B
APHA-4500 Cl -G
Determination of Monochoramine
APHA-4500 Cl -G
3125 APHA-21 st
edition.2005
APHA- 3120, VGA
Manual
APHA- 3120, VGA
Manual
APHA 6630B
APHA-9223 B
BSI BS 6068 section 4.7
:1989
BSI BS 6068 section 4.4
:1989
BS EN 26461 part 2 1993
Water quality- detection
103
Test Method
Chemical Analyses
Determination of Moisture
Determination of pH
Determination of Total Phosphorus
Determination of Total Heavy
Metals*Copper(Cu),Cadmium
EPA-SW-846-9045 C
Chemical Analysis of ecological meterials3,APHA-4500 P D
EPA-139-13 Melbourne.1981,MOOPAM
4th edition &APHA-3111
P
(Cd),Lead(Pb),Nickel(Ni),Zinc
(Zn),Chromium(Cr)*
Determination of Petroleum Hydrocarbons
Determination of Oil And Grease
Determination of Sludge-
APHA-5520 E
DM,EPSS TG-No-43
Leachate Test
Determination of Electrical conductivity Of Soil
104
Test Method
MOOPAM 4th
ED,section 5.3,5.4
Chemical Analyses
(Cd),Lead(Pb),Nickel(Ni),Zinc (Zn)
Determination of Hydrocarbon
MOOPAM 4th
ED,section 6.8,6.9
P
105
Laboratory Name
Tel.
Fax
P.O. Box
E. Mail
(Exova Qatar)
44603202
44603246
23650
qatar.reception@exova.com
(ACES)
44870141
44870146
19579
acesdoha@aces-int.com
(ACTS)
44601257
44601254
22159
infoqatar@acts-int.com
(Gulf Lab)
44607034
44607628
4024
gulflabs@mannai.com.qa
(Tech Lab)
44603251
44600952
5652
info@techlabqatar.com
(QIL)
44601580
44601739
10415
qil@qatar.net.qa
(QEL)
44515401
44515317
40278
qel@qel.com.qa
(Pioneer)
44690362
44514407
41028
customerservice@pioneerlaboratory.com
(Teyseer Labs)
44621254
44568977
1556
lab@teyseergroup.com
10
(ITL)
44554309
44554310
37986
info@itl-qatar.com
11
(TEL)
44507437
44580716
47428
must@qatar.net.qa
12
(DTL)
44607508
44607552
40462
info@dtl.com.qa
13
(Fugro)
44601075
44601076
47167
fme_qtr@fugrome.com
14
(QGEC)
44501473
44501573
22054
main@qgec.net
15
(ALBARAHA)
44501701
44509326
8294
info@bat-labs.com
0T
106
2. Abroad Laboratories:
No.
Laboratory Name
City-Country
Tel.
Fax
P.O. Box
E. Mail
Dubai - UAE
00971-43027222
00971-43366160
67
aaelian@dm.gov.ae
Dubai - UAE
00971-43332692
00971-43332693
26385
joy.gomez@bell-wright.com
Dubai - UAE
00971-48867400
00971-48867401
5778
sales@geochem.ae
107