By-Pass Blanking Plugs

Plugs run in the by-pass position, assuring equalization

Applications

Shutting in wells downhole

Snubbing tubing in and out of the hole

Setting hydraulic packers

Test tubing by bleeding pressure off from above

Features

Run in the by-pass position, assuring pressure

equalization

To equalize pressure, the prong must be pulled

from the body

Normal wireline tools and techniques are used to

run and pull

EFSG Blanking Plug

EFWG Blanking Plug

SLPX Blanking Plug

The Evolution Model EFSG Blanking Plug is a

The EFWG Blanking Plug is a positive blank-off,

The Evolution Model SLPX Blanking Plug is

positive blank-off tool designed to be run into a

top no-go tool designed to be run into an EF

used to land into the appropriate sized Model

Model EF Landing Nipple or into the upper sub

Landing Nipple or an upper sub of an EL or SLFU

SLX Landing Nipple.

of an EL Sliding Sleeve. It holds pressure from

Sliding Sleeve. It holds pressure from both

both above and below. Conventional wireline

above and below. Conventional wireline tools

Once in place it blanks off all pressure from

tools and techniques are used to run, set and

and techniques are used to run, set and pull the

above or below the tool. Some of the uses for

pull the plug.

blanking plug.

the SLPX are: to pressure test tubing, to

temporarily isolate specific zones the well, to

The EFWG is designed to be used with a

temporarily or permanently suspend or

removable mandrel for equalizing pressure.

abandon selected zones and to help snub

tubing into or out of the hole under pressure.

This document is uncontrolled when printed.

2015 Evolution Oil Tools Inc. All rights reserved.

www.eotools.com
Toll Free: 1-800-265-TOOL

Blanking_Plugs_By-Pass_TDS (Blanking Plugs

By-Pass) February 2015

Flow Control

By-Pass Blanking Plugs

UNITED STATES OF AMERICA

CANADA
#3, 1820 30 Ave NE

P.O. Box 5363

Calgary, Alberta T2E 7M5

2908 Coffey Street

Toll Free: 1-800-265-TOOL (8665)

Victoria, Texas 77903

Main: 403-243-1442

Main: 361-575-7900

Fax: 403-258-2614

Fax: 361-575-8081

th

6415A - 63 St. Close

2400 Kermit Hwy

Lloydminster, Alberta T9V 3B5

Odessa, Texas 79764

Tel: 780-522-8294

Cell: 432-638-7902

Fax: 780-875-6337
4512 81 Ave
Edmonton, Alberta
Tel: 587-758-9091
Cell: 780-919-1722
Cell: 780-893-1019

www.eotools.com

www.eotools.com