Escolar Documentos
Profissional Documentos
Cultura Documentos
samsung S1030
Contents
Part 1. Basic information
Part 2. Firmware
Part 3. Adjustment
Part 4. Disassembly
1. Basis information
Special Features
Feature
1. Basis information
Special Features
Feature
10.1 mega pixels 3x optical zoom
The Samsung S1030 is a high resolution digital camera equipped with a true-colour filtered 10.1
mega-pixel CCD and a 15x total zoom (3x optical, 5x digital), allowing you to produce highquality, detailed photos for printing up to poster size.
1. Basis information
Special Features
Feature
Supports high resolution ISO 1000
The Samsung S1030 supports ISO 1000, making it one of the most light-sensitive models in its
class. This allows you to use faster shutter speeds - great for moving subjects and capturing crisp
images in low-light conditions. [Select from ISO/AUTO 80, 100, 200, 400, 800, 1000]
1. Basis information
Special Features
Feature
MPEG-4, VGA 30fps movie function
The powerful video capability of the Samsung S1030 delivers a "camcorder like"experience. For a
more enhanced movie shooting experience, the Samsung S1030 uses MPEG-4(640 x 480 30fps).
Ergonomic grip
The user-friendly ergonomic body design delivers comfort and a steady hold for better shots. This
means you can expect even better focus no matter where your subject isin the frame.
1. Basis information
Special Features
Feature
Auto Macro & Macro 4cm
When set to Auto mode, the Samsung S1030 automatically adjusts the shooting distance and
focus from between 4cm to infinity, helping you to get great close-up shots more easily. For more
detailed macro pictures the additional Macro mode allows you to take shots of subjects as close as
4cm.
1. Basis information
Special Features
Feature
Easy to use manual features
The easy-to-use manual features of the Samsung S1030 put you in control of the shutter speed and
aperture so you can get that perfect shot - easily.
1. Basis information
Specification
Specification
1. Basis information
Specification
Specification
1. Basis information
Specification
Specification
1. Basis information
Specification
Specification
1. Basis information
Identification of Parts
Part names
1. Basis information
Identification of Parts
Part names
1. Basis information
Identification of Parts
Part names
2. Firmware
Reseting Camera
Initializing
1. Turn on the Camera.
2. Firmware
Reseting Camera
Initializing
Press the Up button twice and the Voice recording mode will be selected.
2. Firmware
Reseting Camera
Initializing
3. Press and hold the Up button and Shutter button and then press the Power button again.
2. Firmware
Reseting Camera
Initializing
4. Turn on the camera and check whether the camera is reset or not.
2. Firmware
Checking Firmware
Checking version
1. Remove the memory card from the camera.
2. Firmware
Checking Firmware
Checking version
2. Turn on the camera.
2. Firmware
Checking Firmware
Checking version
3. Press the Up button twice to select the Voice Recording mode.
2. Firmware
Checking Firmware
Checking version
4. Press the 5 function button as following order.
(Left button Right button Up button +/- button)
2. Firmware
Checking Firmware
Checking version
5. Check the Firmware and turn off the camera.
2. Firmware
Upgrading Firmware
Upgrading
1. Insert the SD card that has the firmware.
2. Firmware
Upgrading Firmware
Upgrading
2. Use the AC adapter or fully charged battery.
To upgrade the Firmware, all of the battery level indicator on the LCD monitor must be displayed.
2. Firmware
Upgrading Firmware
Upgrading
3. Turn on the camera.
2. Firmware
Upgrading Firmware
Upgrading
4. Press the Up button twice to select the Voice Recording mode.
2. Firmware
Upgrading Firmware
Upgrading
5. Press the 5 function button as following order.
(Left button Right button Up button +/- button)
2. Firmware
Upgrading Firmware
Upgrading
6. NOW UPGRADING!' message will display and then the firmware will be upgraded.
2. Firmware
Upgrading Firmware
Upgrading
7. After upgrading the firmware, the camera is turned off.
8. Turn on the camera and do the 'Reset' menu in the Setup menu.
2. Firmware
Full Version of Firmware 1
2. Firmware
Full Version of Firmware
2. Firmware
Full Version of Firmware
2. Assemble the camera correctly and insert the SD card that has the Full version of
firmware.
2. Firmware
Full Version of Firmware 2
When using the full version upgrade, back up the script file as the files will be deleted by the
upgrade.
If the full version upgrade is done by the following way, the script files are saved on the SD
card.
To upload the script files, do not remove the SD card and refer to instructions listed below.
2. Firmware
Full Version of Firmware 2
2. Firmware
Full Version of Firmware 2
To upgrade the Firmware, all of the battery level indicator on the LCD monitor must be displayed.
2. Firmware
Full Version of Firmware 2
2. Firmware
Full Version of Firmware 2
2. Firmware
Full Version of Firmware 2
2. Firmware
Upgrading Firmware
Upgrading
6. NOW UPGRADING!' message will display and then the firmware will be upgraded.
2. Firmware
Upgrading Firmware
Upgrading
- After completing the upgrading, back up files will be made on the SD memory card.
Backup file names are LSCLUT0.BIN, DefectivePixel0.bin and DefectivePixel1.bin .
2. Firmware
Full Version of Firmware 2
7. After upgrading the Full version firmware, upload the script files.
Turn on the camera and press the Up button twice to select the Voice Recording mode.
Press the 5 function button as following order :Tele button Wide button Down
button OK button.
2. Firmware
Full Version of Firmware 2
3. Adjustment
Basic Information of Adjustment
Adjustment Caution
1. To adjust the camera after changing the electronic parts, see the below table.
3. Adjustment
Basic Information of Adjustment
Adjustment Caution
2. Equipment
Equipments
- AE TESTER : AE TESTER can test up to LV 16.7
- POWER SUPPLY : 3.3V / 2A
Chart
- Focus Chart
- Gray Chart(18%..Reflection Paper)
3. Adjustment
OB SETTING
<How to adjust>
a...Download the adjustment file and save it to SD memory card.
b...Insert the SD memory card that has the program file and turn on the camera.
3. Adjustment
OB SETTING
3. Adjustment
LENS SHADING
This menu adjust the brightness gaps between center of the lens and around the lens.
Required Equipment : AE TESTER(LV: 8.2)
<How to adjust>
a...Prepare AE TESTER can be test up to LV16.1.
b...Download program file and save it to SD memory card.
c...Insert the SD memory card that has the program file and attach the camera to the AE TESTER.
3. Adjustment
LENS SHADING
3. Adjustment
LENS SHADING
3. Adjustment
LENS SHADING
3. Adjustment
CCD DEFECT Pixel
After changing the MAIN PCB and CCD, adjust the defect of the CCD CELL.
<How to adjust>
a...Download the adjustment file and save it to SD memory card.
b...Turn on the camera.
3. Adjustment
CCD DEFECT Pixel
3. Adjustment
BACK LASH ADJ
After changing the MAIN PCB, BARREL and CCD, adjust the BACK LASH.
<How to adjust>
a...Download the Program file and save it to SD memory card.
b...Insert the SD memory card that has program file and turn on the camera.
3. Adjustment
BACK LASH ADJ
c...<Figure 3-1> will be displayed on the TFT LCD and the adjustment will be done automatically.
3. Adjustment
B/T LEVEL ADJ
After changing the MAIN PCB, adjust WARNING LEVEL and LOCK LEVEL.
Required Equipment : POWER SUPPLY(2.71V)
<How to adjust>
a...Prepare the POWER..SUPPLY.
b...Connect the camera to the POWER..SUPPLY.
3. Adjustment
B/T LEVEL ADJ
f...The adjustment will be done automatically. There are no displays on the LCD.
g...After completing the upgrade, the camera is turned off automatically.
3. Adjustment
S/T CLOSE TIME ADJ
After changing the MAIN PCB, BARREL and CCD, adjust the SHUTTER CLOSE TIME.
Required Equipment: AE TESTER(LV 15.8)
<How to adjust>
a...Prepare AE TESTER that can be test up to LV 16.00.1.
b...Attach the camera to the AE TESTER.
3. Adjustment
S/T CLOSE TIME ADJ
e...Insert the SD memory card that has the program file and turn on the camera.
Mouse on the program file and click the right button of the mouse. Select Save as (A) to save it as a new file name.
3. Adjustment
S/T CLOSE TIME ADJ
3. Adjustment
S/T CLOSE TIME ADJ
3. Adjustment
FLASH ADJ
After changing the MAIN PCB, BARREL and CCD, adjust the SHUTTER CLOSE TIME.
Required Equipment: AE TESTER(LV 15.8)
<How to adjust>
a...Arrange a 36% reflect chart in a darkroom..
b... Arrange a camera in a darkroom. (Use TRIPOD)
c...The distance between the reflect chart and the camera should be 80cm.
3. Adjustment
FLASH ADJ
3. Adjustment
FLASH ADJ
<Figure 6-1>
3. Adjustment
FLASH ADJ
3. Adjustment
FOCUS ADJ
After changing the MAIN PCB and BARREL, adjust the PUNT.
<How to adjust>
a...Arrange a chart for adjust the FOCUS.
b...Attach the camera to the tripod.
c...The distance between the chart and the camera should be 80cm.
3. Adjustment
FOCUS ADJ
e...Insert the SD memory card that has the program file and turn on the camera.
3. Adjustment
FOCUS ADJ
3. Adjustment
FOCUS ADJ
3. Adjustment
BURNING TEST
BURNING TEST : After changing the MAIN PCB and parts, check whether all of the
camera functions work correctly.
CCD DEFECT CELL : After changing the MAIN PCB and CCD, adjust the DEFECT
CELL of CCD.
<How to test>
a...Type step <6> by using the table shown below.
Ex.> <6>20,14,1,2,4,3,6,7,8,9,10,11,12,13,14,15,,1,,1,1,1,1,3000,400,6,20000,0,65535,0;
1st number means : Repeat time (To repeat this adjustment 20 times, put 20.)
2nd number means : Number of codes (As there are 14 codes
-1,2,4,3,6,7,8,9,10,11,12,13,14,15 -, put 14.)
From the 3rd to last number means : see the table.
4th number means : for CCD DEFECT CELL
3. Adjustment
BURNING TEST
b... Insert the SD memory card that has the program file and turn on the camera.
3. Adjustment
EEPROM READ
c...Turn on the camera and the DATA in the EEPROM will be copied in the SD card.
The codes from ADDRESS 0 to 7 will display on the LCD monitor and the rest of codes will
not display.
d...Turn off the camera after reading and saving the data.
e... If you read the SD card in your PC, you can find the STS3_103_E2PR.CSV file and you can
check the EEPROM DATA.
3. Adjustment
EEPROM WRITE
c... Turn on the camera and the data of EEPROM will be copied to the camera.
d... When the copy is complete, the camera is turned off automatically.
4. Disassembly
Disassemble Camera
Procedure of disassembly
1. Remove 2 screws.
4. Disassembly
Disassemble Camera
Procedure of disassembly
2. Remove 2 screws.
4. Disassembly
Disassemble Camera
Procedure of disassembly
2. Remove 2 screws for each side.
. Notice : distinguish by a difference of length .
4. Disassembly
Disassemble Camera
Procedure of disassembly
3. Remove 4 screws.
4. Disassembly
Disassemble Camera
Procedure of disassembly
4. Disassemble the BACK COVER.
4. Disassembly
Disassemble Camera
Procedure of disassembly
5. Remove 3 screws.
4. Disassembly
Disassemble Camera
Procedure of disassembly
6. Lift up the LCD and move to the direction as shown.
4. Disassembly
Disassemble Camera
Procedure of disassembly
7. Disassemble the PCB from the connector.
4. Disassembly
Disassemble Camera
Procedure of disassembly
8. Disassemble the LCD.
4. Disassembly
Disassemble Camera
Procedure of disassembly
9. Caution : Before disassembling, discharged the MAIN CONDENSOR first.
4. Disassembly
Disassemble Camera
Procedure of disassembly
10. Disassemble the PCB from the connector.
4. Disassembly
Disassemble Camera
Procedure of disassembly
11. Remove 2 wired (Black, Red).
4. Disassembly
Disassemble Camera
Procedure of disassembly
12. Disassemble the FRONT COVER.
4. Disassembly
Disassemble Camera
Procedure of disassembly
13. No.1 : Before removing the PCB soldering, discharge the main condenser.
No.2 : Remove the 2 soldering of battery contact and 2 screws. No.3 : Disassemble the
connector.
4. Disassembly
Disassemble Camera
Procedure of disassembly
14. Disconnect the CCD PCB from the connector.
4. Disassembly
Disassemble Camera
Procedure of disassembly
15. Disassemble the MAIN PCB.
4. Disassembly
Disassemble Camera
Procedure of disassembly
16. Remove 2 screws.
4. Disassembly
Disassemble Camera
Procedure of disassembly
17. Disassemble the STROBE PCB.
4. Disassembly
Disassemble Camera
Procedure of disassembly
18. Remove 3 screws.
4. Disassembly
Disassemble Camera
Procedure of disassembly
19. Disassemble the Barrel ASSY.
4. Disassembly
Disassemble Camera
Procedure of disassembly
20. Remove 3 screws.
4. Disassembly
Disassemble Camera
Procedure of disassembly
21. Disassemble the CCD FPCB ASSY.
4. Disassembly
Disassemble Barrel
4. Disassembly
Disassemble Barrel
4. Disassembly
Disassemble Barrel
2. To disassemble the Barrel, remove the screw that holds the F PCB. d X 1
4. Disassembly
Disassemble Barrel
4. Disassembly
Disassemble Barrel
4. Disassembly
Disassemble Barrel
4. Disassembly
Disassemble Barrel
6. To disassemble the Guide Plate from the Cam Barrel, press the 3 points of the Guide Plate
inside and remove it.
4. Disassembly
Disassemble Barrel
4. Disassembly
Disassemble Barrel
8. To disassemble the Shutter Ass'y from the 2nd Lens Ass'y, disassemble the F PCB Guide
and screw.
4. Disassembly
Disassemble Barrel
8. To disassemble the Shutter Ass'y from the 2nd Lens Ass'y, disassemble the F PCB Guide
and screw.
Take care of the double glue tape when disassembling the PCB Guide.
4. Disassembly
Disassemble Barrel
4. Disassembly
Disassemble Barrel
4. Disassembly
Assemble Barrel
4. Disassembly
Assemble Barrel
4. Disassembly
Assemble Barrel
4. Disassembly
Assemble Barrel
4. Disassembly
Assemble Barrel
5. Assemble the Cam Barrel and Guide Plate. To assemble them press the Guide Plate as
shown. You can hear Click sound when they are assembled correctly.
4. Disassembly
Assemble Barrel
6. Match the Boss part of the Outer Guide Barrel and Guide part of the Outer Guide Barrel.
4. Disassembly
Assemble Barrel
7. Assemble the zoom Ring + 2nd Lens Ass'y and Cam Barrel + Guide Plate.
Before assembling them, rotate the Guide Plate until the groove of the Cam Barrel is shown.
4. Disassembly
Assemble Barrel
8. Match the part of the Cam barrel that has no pattern and grooved part of the
Zoom Ring + 2nd Barrel Ass'y and assemble them
4. Disassembly
Assemble Barrel
8. Match the part of the Cam barrel that has no pattern and grooved part of the
Zoom Ring + 2nd Barrel Ass'y and assemble them
After completing the assembly
4. Disassembly
Assemble Barrel
9. Assemble the Outer Cam Barrel and Outer Guide Barrel. When assembling them,
take care of the position of the screw hole of Outer Cam Barrel and reflector of Outer
Guide Barrel.
4. Disassembly
Assemble Barrel
4. Disassembly
Assemble Barrel
11. Taking care of Focus motor and Barrel Lever, assemble the Lens base Ass'y.
4. Disassembly
Assemble Barrel
Thank you