Escolar Documentos
Profissional Documentos
Cultura Documentos
0 Dated: 01/2007
Position A (LOAD)
Injection valve Waste
In-Line
Waste
Refraktometer
Sample
OWLS Sensor Holder
Continuous Flow Loop
Syringe
Sample Syringe
Needle Port
Syringe
Flow cell O-ring
Pump
Sensor
Waste
Position B (INJECT)
Injection valve Waste
In-Line
Waste
Refraktometer
OWLS Sensor Holder
Continuous Flow
Syringe
Sample Syringe
Waste
Description:
SIS-06 subunit provides bubble-free, controlled flow rate fluid supply through the cuvette of the sensor holder with flow rate
setting in the range of 0.01µl/min - 35ml/min. Selectable 20µl - 200 µl sample loop is offered for controlled-volume sample injection
with Rheodyne Model 9725 injector valve. The syringe pump (Type: NE-1000) is a stand alone unit controlled by manual or PC
commands. Inline refractometer is optional see datasheet Model RI-MV751.
MicroVacuum Ltd. H-1147, Kerékgyártó u. 10. Budapest, Hungary Phone: + 36 1 252 1991; +36 1 467 0108 Fax: +36 1 221 7996
Web: http://www.owls-sensors.com/ E-mail: info@owls-sensors.com Copyright @ Microvacuum, 2007