Escolar Documentos
Profissional Documentos
Cultura Documentos
NSCP-W62
Navigation
&
Audio book
CRA4803-A <1>
Introduction
Basic operation
Basic navigation operation
Search
Root
Registration and editing operation
Use of various types of information
Setting of navigation
Audio Basics
It wants to receive a broadcast
Use music disk
Use the SD card
Use the Bluetooth Audio
Use the AUX
Setting Audio
Use the camera function
Other operations
Appendix
Page 2
Two
CRA4803-A <2>
Precaution
(Please be sure to observe in order to Safety)
In order to prevent damage to you or harm or property to other people, and explain
that you get sure to observe
It is doing.
Ignore the display contents , the degree of danger and damage to exert upon the
wrong use pieces divided in the next display
It is, are described.
Caveat
It is a "content a person is assumed could result in death or serious injury."
Note
The occurrence of only the contents and property damage slightly injured possibility
is assumed "human assumption
The contents "to be.
the type of failure to observe the precautions are classified in the following picture
display, are described.
Note (including a warning) The contents that must be.
The contents of the Force where I am be sure.
The contents of the prohibited (doing it should not be).
MN-001-002
Connection and mounting
Caveat
Ban
This machine is DC12V grounded vehicles only
Please do not use in 24V vehicles. Fire and late
It becomes the cause of the disabled.
In place to interfere with the operation of the air bag
Is not an absolute to the mounting wiring
If you are installing the air bag equipped car, the vehicle
We will continue to check the notes on the work of the manufacturer
Please. Air bag malfunctions, of fatal accident
It may cause.
Place to prevent the forward visibility and driving operation
Place, in a location that is hazardous to passenger
I am not attached to the absolute
It becomes the cause of traffic accidents and injuries.
Turn off the coating of the power cord, other
Do not take the power of equipment
If the current capacity of the power cord is over, fire
Disaster or electric shock, it may cause malfunction.
The mounting safety parts (stearic
Ring, brake, volume of the tank, etc.)
Belt and nut are not used to the absolute
If you use these, braking inability or fire, traffic
The cause of the accident.
Caveat
Ban
The antenna, in order to meet safety standards Na
You can paste the stomach place, with re-paste
Paste in the only and general-purpose of double-sided tape
Not or
Peeling poor visibility and the antenna is, the cause of the accident
It becomes.
Forcing
Mounting and wiring, change the mounting location, cheap
Three
Introduction
CRA4803-A <3>
Caveat
Forcing
Be sure to use the supplied parts, surely
Fix
If you use other than the supplied parts, equipment internal parts
And damage the goods to the outside can not be securely fastened
It is to become a hindrance of operation, and cause of the accident or injury
Will.
You want to connect and installed in accordance with instructions
When you make a connection, attached to not follow the instructions,
It may cause a fire or failure.
The coating is not part of the code tape
Insulation, etc.
By short-circuiting, fire or electric shock, and the cause of failure
Will.
Body and threaded portion, a seat rail
Do not sandwiched between the code which the moving parts
The wiring will Iyo
By disconnection or short circuit, fire or electric shock, of failure
It may cause.
If cords and interfere with driving operation
Fixed so as not
Steering and selector lever, brake pedal
When wrapped around such as Le, it becomes the cause of the accident.
After installing the wiring is complete, power
Make I see goods to work restored successfully
Be sure
When used in a state that does not work properly, and Ya fire
Electric shock, it will cause a traffic accident.
Small parts such as screws, of infants
Store out of the reach of hand
If swallowed, immediately phase to doctor
Please be Dan.
Note
Ban
Hot air of direct sunlight or heater directly
it is not attached to the location where you hit
The internal temperature will rise, and cause a fire or failure
There is a thing.
Preparative unstable the antenna and monitor
It is not attached to a time
It may cause such as dropping.
Do not block the vents and heat dissipation plate
Internal heat build up to, and cause a fire or failure
There is a thing.
Cords are not cut in the middle of absolutely
And if the cords that with fuses
Some reason, no longer work protection circuit, fire
It may cause.
Note
Ban
Wiring of the cords, the body of the high-temperature portion
It is not brought into contact with the
It may cause a fire or electric shock.
Products shipped with power leads, back
It is not directly connected to Terry
It may cause a fire or electric shock.
Current is insufficient, the power directly from the battery
If you take, you will use a dedicated wiring kit
Please.
It is not a branch wiring
Cable is heated, it is a fire and electrical shock hazard
There is Rukoto.
place and water and condensation that rain blows, dust
Ri, in the place where such as soot is mixed
It is not installed
Smoke or fire, it may cause a malfunction.
Forcing
So that code does not touch the metal parts
Wire
A damaged power cord is in contact with metal parts, fire
Or electric shock, it may cause a malfunction.
Antenna and camera before and after the car width and car
It is mounted in a location that does not protrude from the
In contact with, such as a pedestrian, and the cause of the unexpected accident
It may become.
Write pull the antenna code or the like in the car
No case, be aware of the infiltration of rainwater
If rainwater is entering the car, the cause of fire or electric shock
It may become.
How to use
Caveat
Ban
Driver not operate while driving
It might cause a traffic accident becomes a front carelessness
Vinegar. Is operation after stop in safe place
Please be.
The driver does not watch the image while driving
It may cause a traffic accident becomes a front carelessness.
It is a retreat operation and screen to increase the speed
Do not retreat operation of while watching the only
Video back camera uses a wide-angle lens
It has. Since the actual distance and the feeling is different,
There is a possibility that the hit to the people and things. In addition,
Not be retracted while confirms safe visual
Please be. People who have become blind spot of the camera
There is a possibility that the hit on and things, an unexpected accident original
It becomes the cause.
Page 4
Four
CRA4803-A <4>
Caveat
Ban
Hand or fingers in the media insertion slot, the foreign matter
Not put
Injury or electric shock, it may cause a fire or failure.
It is not wetted with liquid
It may cause smoke or fire or electric shock. In particular
Please note that in families with children.
Screen is not displayed, no sound, voice
Abnormal and failures, such as it is broken, distorted
Do not use the state
unexpected accident, fire, or may cause electric shock.
NO contact
If thunder is heard, antenna code
Do not touch the soil and the machine
There is a risk of electric shock from lightning.
Disassemble
Do not disassemble or modify
Traffic accidents and fire, it may cause electric shock.
Forcing
Run in accordance with the actual traffic regulations
Only to route guidance by the navigation
Therefore, when traveling, it is contrary to the actual traffic regulations
There is a case, it will cause a traffic accident.
When the driver watch TV and video
Huang, parking blanking be sure to stop
Bet the rake
TV and video, while driving for safety display
It will not be.
When replacing the fuse, be sure
Provision capacity fuses (amps)
To use
If you use a fuse that exceeds regulated capacity, fire
It becomes the cause of the disaster and failure.
Note
Ban
This machine is not used except for automotive
Smoke or fire, it may cause electric shock or injury
There.
Do not touch the heat radiating portion of the amplifier
It may cause burns.
Forcing
Five
Introduction
CRA4803-A <5>
Introduction
Safety Precautions ................................. 2
Book How to read .................................. 11
How to book conventions ......................... 11
Please read .............................. 12
Attention to customers ............................. 12
......................... 12 for operation of the machine
Of 3D hybrid sensor
For automatic learning ......................... 12
In order to prevent the battery up of the car ... 12
If you remove the battery terminal
About reconfigured ............................. 12
About SD Memory Card ............. 13
For LCD screen ............................. 13
For map data ......................... 13
For customers of the registered data ... 13
Copyright ................................................ . 14
For security functions .............. 14
Other ................................................. 14
QUICK SETUP ............................ 15
Perform QUICK SETUP .................... 15
............ 15 to start the QUICK SETUP
Preparation .............. 19 for watching TV
Basic operation
Part Names and Functions .................. 20
Navigation body
(State closed the screen monitor) ....... 20
Navigation body
(State opened the screen monitor) ....... 20
Steering switch
(Vehicles only) .................................. 21
You are here screen touch key .................. 21
Basic Operations .......................................... 22
To operate the touch panel .................. 22
Operating in button ............................. 23
Screen switching how ......................... 23
...... 24 to adjust the angle of the screen monitor
To adjust the image quality ................................. 25
Operation of the list screen ............................. 25
Disk out of ......................... 26
And out of the SD card ....................... 28
Character input operation .............................. 30
.......... 30 to switch the method of character input
Flow of character input operation ...................... 30
To switch the type of character .................. 30
Enter the character ................................. 31
No conversion, conversion is carried out ........................... 33
To end the character input ......................... 33
Symbol can be kana-to-kanji conversion .................. 34
Table of contents
Page 6
Six
Table of contents
CRA4803-A <6>
Basic navigation operation
Navigation of the basic operation ........... 35
Operation of the navigation menu ......................... 35
Operation of the shortcut menu ...... 38
Seven
Table of contents
Introduction
CRA4803-A <7>
Registration and editing operation
To register the location .............................. 81
To register the location ................................. 81
.......................... 83 to edit the registered location
.......... 83 to edit the contents registered in the registration area
To erase the registered location ............................. 84
............................. 85 to migrate the registered location
To edit other data ........... 87
To clear the search history ......................... 87
To erase the learning contents of the root .......... 87
......................... 88 to erase the traveling locus
Use of various types of information
............ 89 to use the FM-VICS information
The VICS information ................................... 89
View VICS information on the map ............... 90
And to guide the traffic jam information on the route ... 91
View characters and graphics information of VICS ........ 92
..................................... 93 to select a broadcast station
Eight
Table of contents
CRA4803-A <8>
Audio Basics
Audio Basic Operations ............... 121
Show AV source screen ............. 121
Nine
Table of contents
Introduction
CRA4803-A <9>
Use the AUX
Using the AUX ................................. 144
To listen to the voice of external equipment ................... 144
Setting Audio
........... 145 for a set of audio
Fader / balance setting ............ 145
Loudness setting .............................. 146
Equalizer settings .......................... 146
Source level adjuster setting ... 147
Mute setting .......................................... 148
Use the camera function
Using the back guide monitor .... 149
The back guide monitor
Note point of about .......................... 149
Notes on camera ................... 149
Select the guide way how ................... 150
To the back guide monitor screen
Ten
Table of contents
CRA4803-A <10>
Appendix
Handling Precautions ................... 197
Correct use of the LCD screen how ........... 197
Correct use of a disk-type ........... 197
Correct use of SD card-type ......... 198
Notices radio ...................... 199
For disk ....................... 200
Type of disc that can be played ........... 200
The configuration of the disk ............... 200
WMA / MP3 / AAC /
About WAV files ............ 201
Folders and WMA / MP3 / AAC /
About WAV files .............. 201
The WMA? .................................... 201
And MP3? .................................... 202
The AAC? ..................................... 203
And WAV? .................................... 203
Navigation mechanisms ........... 204
How You are here can be seen ................... 204
Mechanism for increasing the positioning accuracy ... 204
For error is .................................. 205
Failure kana? If you think ............... 207
Common items .......................................... 207
Navigation .............................. 207
Audio ...................................... 208
ETC ................................................. 212
For reset ......................... 213
About body reset ................... 213
About sensor reset ........... 213
VICS information pay broadcasting
Service Agreement ................... 214
Other information ............................... 216
In Search
For database ................ 216
Note about the root matters ............... 216
Eleven
Introduction
CRA4803-A <11>
How to book conventions
Signage
Meaning
Instruction mark
Operation or the like will be noted in the context of performing, in order to maintain
the performance of the product
It describes the fact that I would like you to observe.
Memo
The operation on It should be noted and with that hint, describes such convenient
ways you can use.
Go back
It represents the touch key.
Example: Touch to return
slide
It represents the slide operation. For example, it will be referred to as " slide" the
slide operation to the left.
It represents a button that is attached to the navigation body.
Example: press the (menu)
italic
I would like you to see text and title page or will lead to other instructions,.
Example:
"find the location."
(P55)
Long press /
I long touch
It indicates to press the (touch) it until you hear a "beep".
Press continue /
Continue to touch
Press and are only between (being touched) it indicates that it is operating.
Memo
In this manual, SD memory card, are collectively referred to SDHC memory card is
being referred to as "SD card".
Illustrations and screen examples you use in this book, it may be different from the
actual product.
Screen of the actual product, due to the performance and functional improvement, it
may be subject to change without notice.
Proper nouns, such as product names that are mentioned in this document are
trademarks or registered trademarks of their respective owners.
Twelve
CRA4803-A <12>
Please read
Attention to customers
Of emergency facilities (hospital, fire station, police station, etc.)
For search and route guidance, and in each facility
Please check directly.
This unit, the parking brake ON / OFF
By detecting, by watching the video of the TV while driving
It is so could not have been.
It issues a navigation operations and disk
When you put in, stop the car in a safe place
Is allowed to, the car of the select lever N (New
Tral) or to the P (parking) position, Per
It goes carried out from over the parking brake
Sai.
The Kappuhoru when the monitor part of the unit is open
Containers such as juice and placed in Zehnder interference
you might want to.
Page 13
13
Introduction
CRA4803-A <13>
About SD memory card
In the text, SD memory card and
The SDHC memory card, convenience, "SD
It is referred to as card ".
This machine, SD card and SDHC card
It supports (up to 32 GB).
It also ensures the operation of all of the SD card
There is no than.
During access to the SD card, SD card
Please do not remove the. In addition, car keys
Please do not change the switch position.
There is a possibility that the data may be damaged. The
If it is damaged in the act, such as, compensation
You ca n't.
SD card has a limited service life. Normally used
and such as iodide also have successfully writing and erasing
There are times when it is no longer the operation.
SD we are recognized by you have a personal computer
If the card is, it is not recognized in rare cases this unit
I have. In this case, the SD card not
Depending on the condition, dedicated to format
And certified by formatting tool
You may want to identify. In addition, personal computer
SD When you format a standard feature of
To become a non-compliant format, Day
Can other write or read, it is
Kotogaa that problems such as not occur
Since Ri you, in a dedicated format software
It recommended that you perform the format operation
Are we.
However, if you format, SD
Data recorded on the card are all lost
You. During the format, be sure SD Car
You can create a backup of Dodeta
Please go.
SD card format software
Please read
Page 14
14
CRA4803-A <14>
Copyright
Recording data and programs to the machine
Copyright, copyright for our company and our
It was attributable to the third party that was granted the rights under
Cage you. Customers, any form smell
Even if all of these data and programs
Replicate or part, modified, and vinegar, such as analysis
You can not.
The security features
This machine, security machines by password
It has a built-in function (theft deterrence function). Out
Load at the time of the security function is operating or
To do. Setting security functions as necessary
Please be constant.
"to the security settings
That "(P116)
Other
For the purpose of performance improvement of product, in this unit
To record the operation history information (such as positioning result)
It has the ability to. Contact the operation history information
Personal information of the customers are not included. In addition,
Base and the Company of this information our specification
It can be analyzed only in the specified subcontractors
We have become a mechanism, and have your consent
It will be used only if the only digits.
, Match this unit to your particular purpose
It does not guarantee that you.
The appearance and specifications of the machine, the pre for improvement
You may want to change WARNING without. The
Modification of the product before the change in the case, or
Please read
Page 15
Fifteen
Introduction
CRA4803-A <15>
QUICK SETUP
The basic configuration of the machine, it can be done easily in accordance with the
instructions on the screen.
After your purchase, you have not done and security settings when you begin using
the machine for the first time
If, automatically QUICK SETUP will start. The settings, change later
You can also further.
Do QUICK SETUP
Items and order that can be set in the QUICK SETUP
It is as follows.
Security Settings
Security of the navigation system
You can set the utility.
Volume settings
Navigation of the guide volume, earpiece volume, ringtone
You can set the amount and operation sound.
Home setting
I can home of registration and change.
Bluetooth Settings
You can register a Bluetooth device to this unit
You.
Personalization settings
User icon, user name, Anne
The internal volume, operation sound, and map display
You can be set on a per-user basis.
Started QUICK SETUP
Make
One
To start QUICKSETUP to
Touch
Memo
If you want to set a later time, andsetatthenextstartup
to PleaseTouch.Alsonextstartup
QUICK SETUP will start. In addition, the unit
If you from other startup you want to make the setting, (mesh
New) - Settingandediting - QUICKSETUP from
The settings can also be.
Not set Whenyoutouch,QUICKSETUP
The is not carried out, to display the map screen. However, the back
If you have not done Kyuriti setting, Set
Not youcannottouchto.
During QUICK SETUP setting, tothenext I want to touch on
To the next setting, Previous settings before you touch an
You can move to.
Exit Whenyoutouch,thesettingofuptothatpoint
Page 16
Sixteen
CRA4803-A <16>
Security Settings
Two
Security function Touchto,
Setting the Security of
Memo
The security settings to the setting of the password
Is required.
"Setting the Security"
(P116)
Three
Next Iwanttotouchon
Volume settings
Four
+ or - , ON or OFF
Touch and to set in
Adjust the volume of the "guidance volume" navigation voice guidance
To you.
"Beep"
And set the ON / OFF of the operation sound of the machine
You constant.
"Earpiece volume" hands-free calls when the reception sound of
We will adjust the amount.
We will adjust the incoming volume of "Ring volume" phone.
Five
Next Iwanttotouchon
Setting of home
Six
Home registration youwilltouchon
Memo
If you already have at home you are already registered, registrationchange is
It will be displayed. Step Touch
Seven
To go to,
It can be overridden by changing the home location
You.
Seven
Looking for a location ( P55), decision
It will touch on
Eight
Next Iwanttotouchon
Setting of ETC mounted state
Nine
Touch to choose the state
Memo
When set to "is attached to the car", feature set
Constant
( P101)
"Smart IC consideration route search" of
It will automatically turn ON. In addition, of either
Even when the set function setting
( P101)
Of
"ETC lane guide display" will be changed to ON.
During route guidance, you will not be able to set.
Ten
Next Iwanttotouchon
QUICK SETUP
Page 17
17
Introduction
CRA4803-A <17>
Bluetooth settings
Eleven
Device registration itwilltouchon
Twelve
Touch the device name to be connected
Memo
If the equipment to be connected is not in the list, theotherpartyequipment
Registering from Bluetoothdevicesbytouchingthe
Please register Ri. For more information
"Bluetooth machine
To register the vessel "( P107)
Please visit.
For more information about Bluetooth settings,
"Make the Bluetooth settings" ( P106)
It is Goranku
Please.
13
Next Iwanttotouchon
Setting of the vehicle information
14
Set the contents by selecting each item
Memo
Set parking limit (car make vehicle dimension), parking
It is reflected in the guidance of the car park and toll road fees.
And during route guidance, in the case of the highway mode,
You can not set the "toll segment".
Fifteen
Next Iwanttotouchon
Setting of fuel consumption
Sixteen
Set the contents by selecting each item
Memo
Fuel consumption of the guideline has entered the factory. Input
Fuel consumption to force customers I confirmed in such dealer
Please enter the fuel consumption had left.
17
Next Iwanttotouchon
QUICK SETUP
Page 18
Eighteen
CRA4803-A <18>
Setting of personalized
User currently in use
( P188)
Dedicated
You will do the setting.
Eighteen
Set the contents by selecting each item
Memo
For detailed settings of the personalization settings
Te is,
"To the user settings" ( P188)
The visit
Give me.
19
Next Iwanttotouchon
Exit the QUICK SETUP
Twenty
End itwilltouchon
Previous
One it will return to the previous screen.
Introduction Back QUICKSETUPstartscreen
( P15)
It will return to.
QUICK SETUP
Page 19
19
Introduction
CRA4803-A <19>
Prepare for watching TV
After purchasing the machine, when the first time to visit the TV (one-segment
broadcasting), it can be received
Work (channel scan) to be registered on the machine looking for a channel is required.
Until the channel scan is complete, you will not be able to visit the TV.
Memo
One
Bet the car engine
Two
When the map screen is displayed
I press the (audio)
Twenty
CRA4803-A <20>
Names and functions of each part
( P122)
Volume adjustment of audio
It will do.
AUX input terminal
( P144)
Portable players
Which external device to connect to
Vinegar. 3.5 mm stereo
Insert the mini plug.
Hands-free microphone
Navigation body (state that opened the screen monitor)
Disk insertion port
( P27)
Insert the CD and CD-R / RW
To you.
SD card slot
( P28)
Insert the SD card.
Page 21
Twenty one
CRA4803-A <21>
Basic operation
Steering switch (vehicles only)
MODE switch
Radio and CD, it will switch the AV source, such as a TV. Long press and AV source
It makes the nest OFF.
/ switch
Audio, such as track and file of down / up and rewind / fast forward
Oh it does.
- / + Switch
We will adjust the volume of the audio.
Touch key of the current location screen
User icon touch key
User eye set in the personalization settings
It will display the configuration.
When you touch, in the use of the personalization features
Can you. For personalization features, and details
Clause
"Using the personalization features" ( P187)
Please visit.
Twenty two
CRA4803-A <22>
Basic operation
We'll explain the basic operation of the machine.
Operated by touch panel
Mark and items are displayed on the screen (operation
Direct contact with a finger on the touch key) and (Touch
That) it will be able to operate by.
Example:
End
The final and menu that are currently open
The completion was to return to the original screen.
Go back
Such as menus that are currently open
It will return the screen to the previous screen.
Slide operation
And slide your finger while touching the screen up, down, left, or right
Navigation by simply wells and audio
You can operate some functions of the organization.
One
It will touch on the slide reaction area
Example: CD
Slide reaction area slide frame
Memo
Slide frame is displayed a predetermined time on the screen, slide
It will show the id reaction area.
Slide frame of the icon (
) Is a finger
It indicates the direction in which it is possible to ride.
Slide eye of reaction area and the slide frame
Con depends on the displayed screen.
Twenty three
Basic operation
CRA4803-A <23>
Basic operation
Slide operation list
Operation screen
Behavior
Navigation
Route Information
slide: display cancellation of route information
slide: Display of the next guide land
Intersection guide map
slide: display cancellation of the intersection guide map
slide: Display of the next guide land
Roadblock consideration auto re-route
slide: Check Roadblock
Audio
Transportation information
Slide: 1 620 kHz reception
slide: 1 629 kHz reception
Slides: unmute
slide: mute
Radio / TV
Slides: channel down
slide: channel up
Slides: unmute
slide: mute
DISC (CD, CD-R, CD-RW) /
Bluetooth Audio
Slides: track or file down
slide: track or file up
Slides: unmute
slide: mute
SD
Slides: file down
slide: File up
Slides: unmute
slide: mute
AUX
Slides: unmute
slide: mute
Cellular phone
Phone during an incoming call
Slides: hang up the phone
slide: answer the phone
Operated by button
Use the button on the unit, the switching of the screen,
Display of the menu screen, I audio of operation
Etc. It is possible to carry out.
Switching of the screen how
Navigation screen and the AV source
Switched the scan screen
Navigation screen (map screen) and the AV source
One-A screen (audio / video screen)
It can be switched in touch.
One
In the navigation screen (O
Press the audio)
Page 24
Twenty four
Basic operation
CRA4803-A <24>
+
Screen monitor opens one by one stage.
Screen monitor will close one by one stage.
Memo
Angle memory of this machine was adjusted screen monitor
Is, power supply OFF / ON (engine switch OFF /
The ON) and it will be automatically adjusted angle even.
If you want a different angle, and it will adjust again
Sai.
Page 25
Twenty five
Basic operation
CRA4803-A <25>
Basic operation
Manually or tool adjustment of the angle of the screen monitor
Please do not forcibly performed using. Screen monitor
May fail with a strong force is applied to ter
You.
When you adjust the angle of the screen monitor, things
Please be careful not to pinch. Caught mono
One
In the display screen of the image to be adjusted,
(Menu) press for more than 2 seconds
Two
Touch the left and right of the touch key
Adjust
Depth of black
(white)
Become thin
(black)
Thicken
Contrast (light and dark)
Low
The difference between the black-and-white is small
High
The difference between the black-and-white is large
Brightness
Dark
Darken
Ming
Lighten
Color temperature
(red)
Warm color system becomes stronger
(blue)
Cool system becomes stronger
Color strength
Pale
Become thin
Concentrated
Thicken
Tint
(red)
Redden
(green)
Become green
Memo
Depth of color, one-segment broadcasting or back guide
It adjusts only if you are viewing the monitor image
Rukoto I can. Shades, back guide mode
only when Nita you are viewing a video, to adjust
Thing I can.
Three
Back toTouch
Operation of the list screen
Common operations on the list screen that is displayed during operation
We will describe.
Operation Basic List
Page 26
26
Basic operation
CRA4803-A <26>
The feed page
It will move one screen at a time.
It will touch on
(And continue to touch,
It will move continuously. )
The feed tab
And Sen in the tabbed list
The switch to a list of do's tab
Ri I will instead.
Tab (example: root
Guidance itwilltouchon)
50 operation of sound tab
Line feed
The line feed the child a list
You bet you can.
(Example: Oh or Is the was I)
Tab ( Oh ~ I standing)
Chisuru
It sends sound
The sound list Feed child
You bet you can.
(Example: Oh have sales e e)
(Eg tab Oh is repeated in)
Touch returns
50 sound at the time of the side map display
Operation of the tab
Feed Na was revealed
To put the list on the next page
Rukoto I can.
It will touch on
(Example: Itwasrevealed
Yara Hama )
Memo
To return to the list on the previous page, Touch the
You.
For side map,
Attached to the "side map
Te "
( P46)
Please reference to.
Page 27
27
Basic operation
CRA4803-A <27>
Basic operation
Injury of finger
Note
When you open and close the screen monitors, fingers
Etc. and attention so as not to pinch Do
There. Please note especially for children.
It may cause injury.
Disk Inserting
One
Press the (open)
Two
Disk insertion touchthe
Three
Remove the disc, (O
Press the Pung)
28
Basic operation
CRA4803-A <28>
And out of the SD card
The Day of the SD card when you are using with this unit
Even if others lost, and compensation of the lost data Nitsu
Please pardon be had.
And using a manual or tool the opening and closing of the screen monitor
Please do not attempt to place Te. Screen monitor
You may want to failure and strong force is applied to.
When the opening and closing of the screen monitor, and pinch your stuff
Please be careful not. It was caught mono
When it was waiting, remove the stuck ones
Please open and close.
When forced to carry out the loading and unloading of the SD card, and Ya this unit
There is a possibility that the SD card may be damaged. PLEASE NOTE
Give me.
In SD card slot, even the non-SD card
Please do not insert the. Gold, such as coins
If you insert a genus products, failure internal circuit is damaged
Of the cause.
For safety reasons, while driving out of the SD card
Please do not.
Injury of finger
Note
When you open and close the screen monitors, fingers
Etc. and attention so as not to pinch Do
There. Please note especially for children.
It may cause injury.
Of SD card Inserting
One
Press the (open)
Two
SD card insertion touchthe
29
Basic operation
CRA4803-A <29>
Basic operation
Three
SD "clicks" and until the sound is
And release by pushing the card
Page 30
Thirty
CRA4803-A <30>
Conversion cut the method of character input
Obtain
Character input of this unit, two methods (keyboard
Child is carried out by selecting from a de system mobile phone system)
You bet you can.
One
Or
It will touch on
Each time you touch, the conversion to cut as follows
Wari you.
Keyboard system
"I am using.
Page 31
31
CRA4803-A <31>
Basic operation
Enter a character
Basic operation
If you want to enter on the keyboard method
One
Touch to the character you want to input
If you want to enter the mobile phone system
One
Or the character you want to input is displayed
In, you want to touch the key
Input Example 1: Japan
Na Touch twice to "to"
Itis to touch two five times "to the ho"
32
CRA4803-A <32>
Each time you touch, the statement to the left of the cursor
Character is deleted one character at a time. Cursor
If that someone is on the left end, removed the right of the character
It is. Only the necessary amount by deleting the character,
It will repeat the input.
Memo
Delete Whenyoulongtouch,allofthecharactersonce
You can be removed.
Free up space
One
Of the character we want a space
Move the cursor to the right,
Space Iwanttotouchon
33
CRA4803-A <33>
Basic operation
Do non-conversion, the conversion
You can directly enter the Hiragana, Hiragana
I will convert such as kanji and katakana. Conversion
Conversion, which is displayed according to the characters entered
Be selected from the candidate (predictive conversion function)
You can.
Make a non-conversion input
One
Enter the characters in hiragana,
No conversion Iwanttotouchon
It is entered in hiragana.
Make the conversion input
One
Enter the characters in hiragana
When you touch, the character to be converted
You can change the range.
34
CRA4803-A <34>
Symbols can be kana
Academic symbol
Reading
Symbol
Equal
=
Congruence
Dainari
>
Will award
<
Vatu
Inequality sign
<>
Plus / +
+
Minus / grind
Plus or minus
Mugen / Mugendai
Because
Therefore
Play
Waru
Greek character
Reading
Symbol
Alpha / alpha
Iota
Epsilon
Upsilon
Ohm / omega
Omicron
Buy / key
Cucumber
Gamma / gamma
/ xi
Theta
Zita
Heavy rain
Delta
New
Pi / copy
/ fee
Psi / Pushi
Beta
Low
Parentheses
Reading
Symbol
Parentheses
'' "" () []
[] {} <> ""
"" "" []
Symbol mark
Reading
Symbol
Black spot
Black circle
Win
White circle
Participation
Viewing angle
Zukei
Circle
Beetle, Epilachna round
Diamond
Star
Male
Female
Postal
Unit
Reading
Symbol
Yen
Angstrom
Celsius
Capital relocation
Unit
'"
$
%
Etc.
Nikki at
$
Percent
%
View Per
Tack
"
Poop
'
Lb
Point
Reading
Symbol
Voiced sound mark
,, ...
Handakuten
Circle
..
Arrow
Reading
Symbol
Arrow
Other
Reading
Symbol
Asterisk /
Asterisk
*
Attomaku
@
Ampersand
&
Note
From / to
~
Rice / Star
Sharp
Lane
/\
Section
Dagger
Daburudaga
Aimlessly
Character input operation
Page 35
35
Basic navigation operation
CRA4803-A <35>
The basic operation of the navigation
Operation of the navigation menu
To use the various functions of this machine, the beginning
To me to display the navigation menu.
One
In the navigation screen
And press (menu)
It is displayed.
Route editing
Such as route editing and erasure
View menu to perform turf
Vinegar.
( P78)
Root erase
To clear the route in guidance (medium
Stop) the.
( P80)
Information Menu
Congestion information
The check and information acquisition congestion information
Do you.
( P92)
Data version
Display
Map data that has been recorded in this unit
The version of the search data
You can check.
( P100)
Maintenance
Car of consumables (engine oil
And the time to replace the tire, etc.)
Message display to inform
Setting of I can.
( P96)
System information andserialnumberofthemachineHoyo
Fine sensor learning of the situation and the machine
Make the information of devices connected to the
You can sure.
( P98, 99)
ETC
The dealer installed option on the machine
Down the navigation interlocking ETC system
It is displayed when you connect,
It is possible to confirm the ETC usage history
You.
( P94)
Page 36
36
The basic operation of the navigation
CRA4803-A <36>
Destination menu
Name
Search by entering the name of the destination
You.
( P55)
Street address
Search by entering the destination address
You.
( P56)
Genre
Ken specify the genre of destination
You search.
( P57)
Surrounding facilities
Specify the genre of the vehicle surrounding facilities
It is then retrieved.
( P57)
Phone number
Ken enter the phone number of the destination
You search.
( P59)
Registered location
The destination is selected from the registered point
Nde it finds.
( P59)
Search history
Destination from the point where it was searched in the past
And choose to search.
( P60)
Home
It will search for a route to the home.
( P54)
Home of the tow if home is not registered
We will do the recording.
( P54)
Map code Enterthemapcodeofdestination
It finds Te.
( P60)
Page 37
37
The basic operation of the navigation
Basic navigation operation
CRA4803-A <37>
Audio
Audio
Setting
You can set the audio function
You.
( P145)
TV set
Setting of one-segment broadcasting reception function
It will do.
( P132)
Video screen clock
Display
You want to display the clock on the video screen on the
You set or not.
(
P123)
Telephone and communications
Bluetooth
Setting
This unit and Bluetooth device
Set in the case of Bluetooth connection
To you.
( P106)
Volume settings
The Ya guidance volume of navigation
The adjustment of the operation sound, hands-free
We will adjust the volume when.
(
P111)
Mobile phone data
Edit
Reading and application of the memory dial
Such as the elimination of credit history, mobile phone information
And edit and erase Hou.
(
P182)
Mobile phone menu
Dialing oraphonecallbyenteringthephonenumber
You only.
( P180)
Memory dial powerbycallingthememorydial
We will put the story.
( P180)
Call History
Arrival and departure it will display the trust of history.
(
P180)
Redial
I will make a phone call in the redial.
( P181)
Bluetooth
Setting
This unit and Bluetooth device
Set in the case of Bluetooth connection
To you.
( P106)
Edit and erase
Reading and application of the memory dial
Such as the elimination of credit history, mobile phone information
It is subjected to editing and erasing Hou
Can you.
( P182)
Eco Manager menu
Eco prize
Thumbnail screen of eco prize
It is displayed.
( P186)
Fuel consumption set
Criteria of eco route display of measurement
Make the fuel consumption of the settings that the.
(
P186)
Eco-driving evaluation
History
To view the history of eco-driving evaluates the
Vinegar.
( P185)
Page 38
38
The basic operation of the navigation
CRA4803-A <38>
Shortcut menu
Operation
Automatic to after looking for a place to move the map
Manner the displayed menu that shortcut
It called the menu. Route search and point
Registration, be carried out such as the display of detailed information
Can you.
One
The scroll or location map
Find ( P55)
To display status of the position and the map of the cross cursor
Thus, the short cut in accordance with the respective
-Up menu appears.
When scrolling screen
I register here
Is this the current cursor position
It is possible to be registered in the machine
You.
( P81)
Look for the surrounding facilities
Facilities around the cursor position
Search by selecting a genre
You can be.
(
P57)
Go to here
Destination the arrow cursor position
As, or to perform a route search
Vinegar.
( P63)
Search results when the screen
Information
Search location to the detail information
place where the data is recorded
Page 39
39
Basic navigation operation
CRA4803-A <39>
Operation of the map screen
The map display of the navigation displays the current location of your car (the
vehicle), "You are here image
Location to display that you want to see the plane, "there is a" scroll screen ".
You want to display the current position screen
Even if any screen, you can return to quickly present location screen.
One
Press the (Hometown)
To
To switch (you are viewing in the registration scale
It does not work in this case).
Forty
CRA4803-A <40>
Memo
And when you use the first time this unit, when you did not use a long period of time,
it takes to to display the current location about 5 minutes
There is a thing.
Vehicle mark is, you may deviate from the actual location.
Trajectory display, you can view the travel locus of about 250 km worth passing
through until now. Usually white, the car speed
Two
If the position you want to fine-tune,
Tweak itfromTouch,fine
The integer you want the direction of the arrow (8 directions)
It will touch on
41
Basic navigation operation
CRA4803-A <41>
Change the scale of the map
Map in the range of 10 m ~ 500 km scale
You can change the le.
One
Details or wide area itwilltouchon
More detailedmapthanappears.Table
Range shown will be narrower.
Wide-area mapisdisplayedinawiderangefrom.
Narrow roads, etc. will not be displayed.
Memo
Detail and wide area eachtimeyoutouchthe,and10m,
25 m, 50 m, 100 m, 200 m, 500 m,
1 km, 2 km, 5 km, 1 0 km, 2 0 km,
50 km, 100 km, 200 km, 500 km and vinegar
Kale display will change.
Details and wide-area andcontinuestotouch,insuccession
You can change the scale.
42
CRA4803-A <42>
Type of display method
Normal view
It is displayed in the normal map (2D map).
Detailed city map recording area
( P218)
In,
Detailed city at the time of the 10 m ~ 50 m scale
Town map is displayed (City map).
Memo
Automatically usually land in the vicinity of the boundary of the city map
The display switches in the figure. City map
You can also display the boundary. In that case,
City map only appear in the vicinity of the boundary, boundary
The outside nothing is displayed.
City map display and the City map boundary table
Shows can be ON / OFF.
"function to the setting"
(P101)
Sky View
Map as seen from the sky (3D Map)
There will be displayed.
Eco-information display
Eco-driving evaluation screen
( P185)
There, the right side of the map
It appears in.
Highway mode
43
Basic navigation operation
CRA4803-A <43>
44
CRA4803-A <44>
ON the enlarged display of character /
To OFF
Statement of place names and facility name to be displayed on a map screen
You can to enlarge the character.
The factory is "OFF".
One
View character enlarged display of map
It will touch on
45
Basic navigation operation
CRA4803-A <45>
Two
Ja you want to display the logo
Touch the Nru
Two
~
Three
Repeat the go
Please.
Four
End itwilltouchon
46
CRA4803-A <46>
Four
It will touch on the hope of Facility Name
Display: ON touchthe
47
Basic navigation operation
CRA4803-A <47>
Highway mode
In highway mode, the current position or combing
To roll destination facility map of again map
It will be displayed.
List screen
In the list screen, such as when you find a location, select
Map in the vicinity of the facility, which is the Saidoma~tsu
It appears in-flops.
Candidate display screen
In the candidate display screen, the facilities have been selected
The location of the map will be displayed on the side map.
Information screen
In the graphic information and character information screen of VICS, Information
Map of the area surrounding the vehicle position along with the screen again
It appears in the map.
Operation of the side map screen
In the side map with list screen, is selected
Position of the list item that is a, Saidoma~tsu
It appears in-flops.
Information
Detailed information of the location you have selected
(
P62)
You can display a.
Go here asadestinationtothelocationyouhaveselected
Route search
( P63)
It will do.
Memo
Scale display ( 100meters When you touch, etc.),
You can change the scale.
48
CRA4803-A <48>
Safety informational
Tion
Various guidance for safe driving according to the situation
It takes place.
Toll road attention point Border guidance
Approximately kilometers from here
Until then, be aware enough operation
Please be.
The earlier, the confluence there from the right
Ri you. Please note.
The earlier, the confluence there from the left
Ri you. Please note.
Ahead, there is a confluence.
Please note.
it enters the prefecture.
About e Start Us
Speed from the start start until after about 5 seconds
Upon detection of more than 41 km / h, sudden acceleration of warning
It is guided by the WARNING message and voice.
Memo
e start guide I can ON / OFF.
"function
To the Settings "(P101)
49
Basic navigation operation
CRA4803-A <49>
On the screen that is displayed while driving
About
When the signal approaches
The traveling direction, a signal within about 300 m
Mark of the machine will be displayed up to a maximum of five locations.
When traveling on the toll road
When traveling on the toll road, automatically highway
Instead cut into by mode (auto high
Way mode).
Memo
Fifty
CRA4803-A <50>
For highway mode
The distance of the highway mode, until the interchange and service area that is
currently headed
Away, and you can confirm and facility information. In addition, in accordance with
the running of the car, automatically the next facility
It will switch to the information. Facility information of the main line or on the branch
destination also, you can see.
Highway mode You are here screen of seeing how
Toll road facility information close to the second
Facility Feed touch key
Screen is changed to the cursor mode, and sends a toll road facilities in order of
proximity to the current location
It will continue. Use, for example, if you want to see the toll road facility close to the
fourth.
You are here Display (Side map)
Toll road facility information close to the first
ETC lane guide
Or the presence or absence of the ETC board equipment
It is displayed unchanged.
Toll road facility information close to the third
SA / PA Feed touch key
SA and (service area)
PA (parking area)
We will send only to order
You.
Memo
Map the orientation of the side map of highway mode will be heading up fixed.
In the highway mode, each type of facility (IC / PA / SA / JCT / lamp / toll / smart IC)
and facilities
Distance and expected time remaining until arrival (pass) from the and location
will be displayed.
The following facilities and service information of the facility
( P52)
It settled to when descended from the fee (pass or toll road and
In the case of facilities) is displayed.
When you touch on the map portion of the side map, it is used to display the map in
the vicinity of facilities in location and selection
Can you.
SA / PA Feed Ifyoutouch,youcansendonlytheserviceareaandparkingareain
order.
If the illustration information to the next facility is recorded, if you select the next
facility, illustrations will be displayed.
If there is a branch destination route to the next facility, you can select the branch
destination.
If the branch facility and SA / PA to the next facility is the hotel, you are prompted to
select either.
If you have to get the VICS information, VICS information
( P89)
There will be displayed.
During route guidance, when it comes to approximately 1 km before the toll road exit
guide of the toll road exit is displayed, an exit
Automatically highway mode when you pass will be canceled.
View Ifyoutouch,youcanswitchtochooseanotherdisplaymap.Also,fromother
mapdisplay
If you return to the highway mode, the right screen will be displayed in the map
display of the angle of the previous. (For example, just before the earth
If diagrammatic representation of Skyview, right screen of highway mode will be
displayed in 3D. )
51
Basic navigation operation
CRA4803-A <51>
About price indication
If you set a route on the toll road,
Rates may not appear.
If the price of non-compliant route to "
*****
"
If it contains fee non-compliant routes
"
*****
Yen or more "is displayed.
Rates display is possible because, urban expressways, urban
During high speed, and it is part of the toll road.
"Paid
For road fee data "
(P219)
Rates displayed, by the vehicle setting, midsize car,
Ordinary car, it can be switched to light car.
"Setting the vehicle information."
(P113)
Correspondingly, for the various ETC discounted rates
No.
See ahead of facility information
In the highway mode, it is allowed to postpone the facility
You can see the destination facility information Te.
One
Next facility , before the facility istouch
And then choose the facility you want to display
Facility in selection
Memo
52
CRA4803-A <52>
But it is taken into account, the available facilities (Example:) is available with
No facilities (Example:) is displayed is distinguished.
(D
Work time account display)
The information displayed at the same time is up to eight. Nine or more
If there is a top of information, priority table in order of the above table
the indicated, it does not appear after the ninth.
Biweekly regular holiday, occasional holidays and irregular management
It does not correspond to the work time. The actual management
The work time may be different.
Memo
Map Whenyoutouch,thepointwherethereisaSAandPA
It will display the map.
53
Basic navigation operation
CRA4803-A <53>
When approaching the toll of toll road
It ETC lane guidance display is set to ON
If that is the charge on the main line that there is ETC lane
Place, or when approaching the exit toll, ETC Leh
Down guidance is displayed.
Memo
ETC lane guidance display I can ON / OFF.
"Ability to set"
(P101)
ETC lane guide display is different from the actual signboard
There is a case.
Na are illustrations data is recorded by a point
If the stomach, it does not appear.
QUICK SETUP
( P15)
ETC mounted state set of
At a constant, and was set to "is attached to the car" place
If it is, is automatically ETC lane guidance display settings
It will be "ON".
Please be sure.
Voice guidance: the ETC card expiration date this month
It is the end. We will continue to check the card
Please.
Example of the case has expired already
Message: the ETC card expiration date
It has expired.
Voice guidance: the ETC card expiration date the switching
It has been.
Operation of the map screen
Page 54
54
CRA4803-A <54>
Go back to home
When you register your home, Lou up home with a simple operation even if they go
to the country where
You can make bets assistance.
I want to register a home
In When you register your home, simple operation
I can route search of the home.
One
To stop the car at home, (menu)
Press and destination - home - yes
It will touch on
Home is registered.
Memo
When you register your home to a new, named "Home"
Home mark and
It will be automatically input.
When you are stopped at a location other than home,
"Location
Find "( P55)
With reference to locate the home of location
Please be.
QUICK SETUP
( P15)
In also be registered in
Can you.
When you register to find a location, and registered as a home
55
Inspection
Rope
CRA4803-A <55>
Look for a place
Navigation operations begin from the fact that to find the location (destination, such
as a stop-off destination destinations)
Ri you. If it is possible to display the destination of the map, set the root to the bottom
Or, you can be watching for more information.
Memo
Depending on the searched location, if the displayed map is not a map of a pin point
around the destination there
Ri you. In that case, a message indicating that it is not a pin point is displayed, the
map of the representative point is displayed.
If you search the facility, please set at the destination after a search without directly
scroll. For example, highway
When you scroll through the streets of the facility after the search is set to destination,
the there if on the open road is the destination
Ri you.
In the search on a natural, you may point there is no road around is displayed. Such a
place
Where, please set the destination on a nearby road Scroll through the map. The
location is not around the road
When the destination, you may not be able to route search.
If the Search location (facility) parking data has been recorded, to guide the parking
lot of the facility as the destination
you might want to. (Parking point link)
56
Look for a place
CRA4803-A <56>
Memo
It is not possible to input other than the hiragana. Katakana,
Kanji, Roman, and look for the facility, including the numbers
Liver, enter in hiragana all.
Name Enter only the portion you know, and search to
Rukoto you can (keyword search).
Input of the voiced sound (Bu) and semi-voiced () it can be omitted.
In addition, such as double consonants (Yo) it can be substituted with such (good).
Name I can enter up to 20 characters eyes.
Search method, the character that is nearest to the number of characters you entered
It will display the number of facilities.
Depending on the input contents and narrowing condition, and Ken
Result of search, of that there is no corresponding data message
There is a case where the information is displayed.
Three
Look for the purpose of the facility from the list
Order of the Japanese syllabary
It sorted in alphabetical order.
Four
It will touch on the facility name
Operation of
( P38)
Please reference to.
Look for in Address
You can search for an address or place name.
One
Press (menu), destination
- Address I will touch on
Two
Prefecture name, city name, place name
It will touch on order
Three
Touch by selecting an address from the list
Make
Memo
Major portion Touchto,thechosenrepresentativeareasoftheregion
It appears map of points.
Address input Whenyoutouch,thefingerbyenteringtheaddress
It can be constant.
In the case of address direct input, do not enter the address
Input end Whenyoutouch,chomeoraddressname
Representative point is searched.
If you know to contain Oaza-Koaza is, respectively
Enter.
57
Look for a place
Inspection
Rope
CRA4803-A <57>
Search by Category
It is to look for various facilities from the genre tab
Can you.
And narrowed that genre tab
Cars and transportation
Buy
Life
Stay-play
Eat
One
Press (menu), destination
- genre I want to touch on
Two
standing to the genre of the tab Filter
Is the earth, further narrow genre
It will touch on
Three
Touch to select a search method
You look around the vehicle /
I look around
And Ken facilities around the vehicle position
You search.
Cursor position around
(Map scroll only)
Facilities around the cursor position
You find the.
Area designation
Search and narrow down the area
You can.
Line order
(Car-transportation only)
Narrow down by route search
You can.
Memo
Search method that is displayed, depending on the chosen genre
Four
It will touch on the purpose of the facility
One
Press (menu), destination
- surroundingfacilities it will touch on
Two
It will touch on the genre
Page 58
58
Look for a place
CRA4803-A <58>
Three
If there is more information genre,
Refine the genre
Four
It will touch on the purpose of the facility
The vehicle around
Find the facilities of the area surrounding the vehicle
You.
Route neighborhood
Five
It will touch on the facility name
Page 59
59
Look for a place
Inspection
Rope
CRA4803-A <59>
Look for the phone number
You may search by entering the phone number of the destination
Can you.
One
Press (menu), destination
- phonenumber I want to touch on
Two
Enter the phone number
Automatically search and the phone number to all the digits input
Me begin. You do not automatically start the search
If, inputend it will touch on.
Memo
Please be sure to enter the area code and the city code.
You can enter up to 10 digits (090,080,070,
Phone numbers that start with 050 and can enter up to 11 digits
Masu).
Dial Q2 (0990- ), mobile phone, shortening
Dial, it is not eligible. However, the corresponding power
If the telephone number is registered in the registered point detection
You can search.
Sixty
Look for a place
CRA4803-A <60>
Look for from the search history
Where it is a place or a destination that has been searched in the past,
Map or display the facilities during highway mode
You can look et al.
One
Press (menu), destination
- Searchhistory I want to touch on
Two
Touch the purpose of the facility (history name)
Make
( P38)
Please reference to.
Look for from map code
By entering the map code, the point
You can call quickly.
Memo
Map code, Japan various locations of place
13-digit maximum the location data (extended map code of place
It is intended to identify a number of the case). Address in such as
A difficult place even map the code to be identified
It can be identified.
One
Press (menu), destination
- mapcode I want to touch on
Two
Enter the map code
61
Look for a place
Inspection
Rope
CRA4803-A <61>
Look for an easy destination search
In operation from the map screen, narrow down the search item
Use the destination menu'm, easily
You can find.
One
Easy destination search on the map screen
62
CRA4803-A <62>
One
The location using the destination menu
Find ( P55)
Two
Information Iwanttotouchon
Three
Confirm the information
Phone number / address / name / genre /
If you look from the surrounding facilities:
Next page
It will switch to the next page.
Map
Map screen is displayed.
Transmission
Power to the phone number that is registered
We will put the story.
( P179)
Go to here
The route to the point that displays
You search.
Memo
For more information, facility icon is displayed.
Parking Yes:
ATM Yes:
Sake of handling (convenience store):
Of tobacco handling (convenience store):
Drive-through (fast food):
The above icon, there is also not displayed some facility
You.
By item of destination menu that you use, vary the contents of the detailed
information that can be displayed.
Page 63
63
CRA4803-A <63>
Root
It will explore the root
If you set the search location as the "destination", a route from the current location to
the destination
It is search, you will see the route guidance start screen.
One
Location Find ( P55)
Two
Go here totouchon
Memo
When in the vicinity of the destination there is a toll road, and the General
Screen is displayed to confirm the road] or [toll road]
It might be. Whether either the case
Please choose.
Congestion consideration route search
( P69)
If is "ON"
Performs a route search in consideration of the VICS information
You.
If you have already been set route, it looked for
Place to either stop-off destination to destination or of pop
-Up screen appears. Destination standing in
When the earth, and to clear the current destination, new purpose
We will explore the root of the earth as a destination. Thestopoff
Earth Whenyoutouch,thedestinationasitis,look
We will explore the route stop by location.
Page 64
64
It will explore the root
CRA4803-A <64>
Route guidance start screen of seeing how
Memo
Route guidance start screen, North-up
( P43)
It becomes.
Congestion information
( P89)
The if is obtained, displays the time required in consideration of the traffic jam.
Rates classification and rates display,
"Setting the vehicle information" ( P113)
Fee of "toll segment" that has been set by the
It is displayed in gold.
Charges that are displayed, not in response to the various ETC discounted rates and
Metropolitan Expressway and Hanshin fast ETC car fee.
However, if you are connected to the Navi linkage ETC system of dealer installed
option on this machine, discount fee in voice
There is that gold is guided.
( P72)
If the route, including the fee non-compliant routes, or is displayed as "more than
hundred yen", "
*****
This is displayed as a circle. "
There is a door.
If the toll road facilities such as service area was a destination, it may fee does not
appear.
Menu display
IC (Interchange) Display
And the first IC of the toll road to be used
Last IC is displayed.
Search conditions
The root of the currently selected
Search criteria are displayed.
(Distance)
Of route that is selected
The total distance is displayed.
(Time)
Function Settings
The setting was estimated arrival time
It calculated the speed to the original
The required time is displayed
You.
(Fee)
Of the toll road to be used
It is the rate classification and rates
It is.
( P101)
Route display
A route that is currently selected
It is schematic representation.
Page 65
65
It will explore the root
Root
CRA4803-A <65>
66
It will explore the root
CRA4803-A <66>
You want to view the route map
One
Route map Iwanttotouchon
( P63)
Two
Guidance start or return totouch
Make
In the route map screen, the scroll of the map
( P40)
Scale changes and
( P41)
It is
You.
I a detailed route setting
You want to add a stop-off place
Add the ground stop-off on the route, and through the stop-off areas
You can be guided Yukari route.
Memo
If you already have a route in assistance, short
Cut menu
( P38)
In gohere standing in
When the blood or of to do stop-off destination to destination
One
Details Routing stop-off location specified
Touch to ( P63)
Two
Additional touchthe
Three
Looking for a location ( P55) stop-off place
Are decided, determined to touch the
Memo
It will specify the order in which stop by.
You can also rearrange the order later.
Four
Search start Iwanttotouchon
Page 67
67
It will explore the root
Root
CRA4803-A <67>
Add to
In addition it will add a stop-off place.
Delete
It will remove the stop-off place.
Sorting
Auto
The total distance of the entire route is shorter
Arranged you changed as.
Sorting
Manual
The exchange arranged by specifying the order in which the stop by
For example you.
Memo
(P69)
One
Details Routing getting on and off IC specified
Touch to ( P63)
Two
Entrance IC designated or exit IC specified
It will touch on
Three
Inter is the entrance or exit
It will touch on the change
Page 68
68
It will explore the root
CRA4803-A <68>
To release the passenger IC specified
One
P67 of procedure
Two
In specifiedrelease in
Touch
Two
The inlet and outlet / inlet only / exit
Only touchthe
Three
Yes Iwanttotouchon
The probe route the specified location was the starting point is
It will be search.
To cancel the point of departure is
One
P68 of the "to specify a starting point."
Procedure
One
In placeofdeparturespecifiedrelease in
Touch
Two
Yes Iwanttotouchon
69
It will explore the root
Root
CRA4803-A <69>
For route search function
Learning route search
Departure, stop-off areas, road frequently used in the vicinity of the destination
Make the route search in consideration of.
Memo
Learning route search I can ON / OFF.
"function
You want to configure. "
(P101)
It does not have the ability to display the learned routes.
the learned road is not necessarily always be used.
and changes when frequently used road was gone
Page 70
70
CRA4803-A <70>
Root induction and Information
We'll explain about the display and voice guidance during route guidance.
You are here screen during route guidance
Memo
Root in guidance, general road is toll road in green will be road-painted in blue. In
addition, near the starting point, and stop-off
Near the ground, near the destination is searched to narrow streets, narrow streets are
displayed in pink. Depending on the location Michinuri
In some cases, it is not Risa.
The estimated arrival time,
"Function to set" ( P101)
estimated arrival time speed in set will be reflected. And
It will also be taken into account VICS information. Time that is displayed is different
from the last actual arrival time at guess time.
Display of distance and estimated arrival time to the destination,
"Ability to set"
( P101)
"Way, estimated arrival time display" of
The By a "stop-off areas" can be changed to display the distance and estimated arrival
time up to the stop-off areas.
The route information, direction and intersection names turn and the distance to the
next guide land is appear
Vinegar. Also, it is further display the direction in which the bend to the distance to
the guide land beyond the upper. By intersection,
It may intersection name is displayed as "guided land".
Route information, you can slide operation.
"Root Information Operations"
(P77)
To approach the guide land (general road: about 700 m, toll road: about 2 km) and, in
the intersection guidance display of the next guide land Leh
Down information, it will be displayed direction sign (in the general road driving). It
does not appear in no intersection of information.
Information display, lane during the induction will be displayed in green. arrow of
white induction lanes to green passage is recommended
It appears in the mark. Lane information display in the toll road running will be
displayed in blue.
For route search,
"Considerations about the root"
( P216)
Please reference to.
Route Information
Direction signboard display
Root in guidance
And the distance to the destination
Expected time of arrival
Lane information
Page 71
71
Root
CRA4803-A <71>
As we approach the guide land
Before about 300 of the guide land m (simple guide
When it approaches the 500 m), the intersection guidance display
Is switched to the screen, the direction of turn display
Will.
Arrow guide (factory settings)
Enlarged view
Memo
Intersection guidance display, change of Arrow Guide / enlarged view
Further I can.
"function to the setting"
(P101)
In the "Arrow Guide", and information on the intersection of the guide target
If there is a broadcast, you will see the signal mark.
Also, if there is information for the next guide land, screen
It appears in the section.
Intersection guidance display, to display the AV source screen
might also be an interrupt displayed in a state where there
You.
Intersection guidance display interrupt table to the AV source screen
It shows I can be ON / OFF.
"function to the setting"
(P101)
During the intersection guidance display,
The Touch but are displayed
With that, you can turn off the intersection guidance. Again,
If you want to display the intersection guidance
Touch to
To you.
72
CRA4803-A <72>
As you approach the entrance of the city highway
About in front of the city highway entrance on the route
When approaching the 300 m, illustrations will be displayed.
Memo
In some urban expressway entrance, illustrations display
It may not be.
If there is a guide point just before the city fast entrance
Might illustrations may not appear.
Page 73
73
Root
CRA4803-A <73>
When close to the narrow street guidance
Is road painted on narrow streets (pink on the route
In was to approach the road), messages and voice
It is guided.
Memo
The message in the narrow streets running, it will continue to display.
Starting the route traveling from within the narrow streets, or fine
If the engine ON / OFF in the streets, and voice
Information will not be performed. However, the message table
It is shown.
Narrow street guide I can ON / OFF.
"function setting
I will be a "
(P101)
Guiding example
Side directions
Approximately m away, side road
The is the left direction.
Toll road entrance-exit guide approximately m destination, left
Direction, is the entrance.
Toll road toll guidance about km away, fee
It is the place.
ETC fee guidance
Prices, was circle.
ETC usage fee is circle
It has been discounted.
Smart IC guidance
Beyond, in the smart IC
Vinegar. The actual signs
Please proceed thus.
Lane guidance
Approximately m away, right
It is over there. Right turn lane
There.
Rates guidance
Rates are circle.
Signal just guiding this signal is left.
Memo
Well the plan is only guidance, such as the right direction and left direction
In a point that can not be inside, to be traveling lane
Also it will guide you like.
Direction of right or left turn induced the actual road form of
Jo and it may not fit.
To take advantage of the ETC information guidance functions of this machine, the
present
Come to the Navi conjunction of dealer-fitted option ETC Shea
You need to connect a stem.
ETC information guide, the information from the information providing facility
More, the guide is done.
Traffic lights just assistance, the fee guided by the ON / OFF
Can you.
"function to the setting"
(P101)
74
CRA4803-A <74>
Guidance at the time of the general road driving
In conjunction with the speed of the car, up to four times in front of the intersection,
the voice guidance will flow. In addition, in the timing
Together intersection guidance is displayed.
Memo
You can to simplify the number and content of the voice guidance.
"function to the setting"
(P101)
Normal time
Approximately 300m away,
It is the right direction.
As above, in m,
It is the left direction.
Second time
The guide point is continuously
When you are
Approximately 700m away,
It is the right direction.
There is a right turn lane.
First
Soon,
It is the right direction.
As above, in m,
It is the left direction.
It is right.
Third time
4th
It is left.
Subsequently,
It is the left direction.
It is about 3km away right direction.
Simple guide when
75
Root
CRA4803-A <75>
Guidance at the time of toll road running
In conjunction with the running of the car, branches and outlets, up to three times in
front of the toll, the voice guidance will flow. In addition, the
District name and branch illustrations at the timing
( P72)
Such as will appear.
About 2km away
It is a toll booth.
First
It will soon make a tollgate.
The cost is circle.
Third time
Approximately 1km away
It is a toll booth.
Second time
Memo
Rates displayed, by the vehicle information setting, midsize car, ordinary car, will be
switched to a light car.
"Setting the vehicle information
Yes "
(P113)
The fee assistance, rates from the entrance you set the route before entering the toll
road to the exit will be guided. Toll
If you set a route since the beginning of the road, or fee guidance is real and different,
and that the fee is not guided
I have.
Charges that are displayed, not in response to the various ETC discounted
rates. However, the dealer installed option on this machine
If you are connected to the navigation interlocking ETC system, you may be guided
discount rates for voice.
(
P72)
76
CRA4803-A <76>
Operations and functions in the route guidance
Operations that can be performed while route guidance, we'll explain the various
functions.
Self when you are out from the root
Dynamically to re-explore the route
If you have deviated from the route in assistance, automatically
Re-searching the route (auto re-route).
Memo
Driver intentionally whether out of the route, road
The judgment is made as to whether or not inside of a mistake, re-probe all routes
Do the search or return route re-search (Intel
Li stringent reroute).
77
Root
CRA4803-A <77>
To guide the traffic jam information on the route
Let
Congestion and regulatory information of VICS that occurred on the route
And it can be guided by the distribution maps and audio
You.
Memo
It will not work, such as when the VICS information can not be obtained
There is a thing.
In the speech, for example, "approximately 3 km away, 1 km of the congestion
But it will have occurred. About 5 minutes to pass takes or
Vinegar. "And it will be guided.
Congestion check
Congestion Whenyoutouch,canbegeneratedontheroute
Check the congestion information that are in the map display and voice guidance
You can be.
Memo
Congestion Eachtimeyoutouch,ofupto5locationsdestination
You can be guided in order to information.
If the root in guidance is not, and regulation of the area surrounding the vehicle
Only it will display and guide the information.
Route Information
Operation of
The sliding operation of the route information
Then, you can view the following information areas, the guide table
You can cancel the shows. Slide
For information about how to operate,
"Slide operation" (
P22)
Please visit.
Route Information
slide
It will release a guidance display.
slide
It will display the following information areas.
Memo
If you want to redisplay the guidance display,
Standing in
You Ji.
78
CRA4803-A <78>
One
Press the (menu), rooted
Collection touchthe
Page 79
79
Root
CRA4803-A <79>
Two
Change the search conditions search
Start Iwanttotouchon
Memo
Change of the search condition is temporary, function
Setting
( P101)
Memo
During the demonstration run is, on the right side of the screen duringthe
demonstration is displayed
You. When you touch, the confirmation of the demo running end message
Message appears. If you want to end Yes
It will touch on.
During the demonstration run, the root Edit menu
( P78)
The demonstrationrunend appears. Touch
You can end the demonstration run with.
Demonstration run is repeatedly performed until to the end
You.
Edit a route
Page 80
80
CRA4803-A <80>
You want to clear the route
If you want to cancel the route guidance and clear the route that you have set.
Memo
You can also be erased from the root Edit menu.
( P78)
One
Press (menu), rootconsumption
is removed by touchingthe
Two
Yes Iwanttotouchon
Page 81
81
Registration and editing operation
CRA4803-A <81>
You want to register the location
You can register in advance want to place that in mind, such as a home or friend's
home, Misao, such as Routing
Work easier.
Memo
You can register up to 1 001 points, including the home.
You can save the registered location information to the SD card, the data of the
registered location from the SD card, you can read into this machine
You can be.
"migrate the registered location"
(P85)
Registered location names and marks it will be able to change.
"edit the contents registered in the registration area."
(P83)
You want to register the location
Register the place visited by Looking place and drive
If you leave, I watched the next time you go there
You can explore the route to do.
In addition, automatically sound when approaching to the registered location
You can also play the.
One
Location Find ( P55)
Three
Touch to choose how to register
Four
Input end itwilltouchon
Memo
Such as the facility of calling in the genre list Search
If you want to register, and data on the telephone number to the facility
If there is, automatically the number is registered.
Procedure
Four
It can be used to change the name to be registered in
Vinegar.
"character input operation."
(P30)
Page 82
82
CRA4803-A <82>
For registration method to choose
Registration method
Registration contents
In "search facility name"
To register
"Looking for the location of the facility
Name "
Sign up for "individual place name."
Make
"Place name of looking for places"
Registered in the "home"
"Home"
Registered in the "Company"
The company
I want to register in the "home"
"Home"
To be registered in the "friend's house" "friend'shouse"
In "Grandpa's house"
To register
"Grandpa's house."
In "Grandma's House"
To register
"Grandma's House"
In the "uncle's house"
To register
"Uncle's house"
In "Aunt's house"
To register
"Aunt's house."
I want to register in the "countryside"
"Countryside"
To register in the "hometown" "hometown"
It is registered with "her home" "herhome"
To register in the "boyfriend's house" "boyfriend'shouse."
To register it with a name andanameofyourchoice
It is registered Te
Can you.
You want to register the location
Page 83
83
Registration and editing operation
CRA4803-A <83>
One
Press (menu), seted
Collection the navigation data editing andtouch
Make
Two
Registered location edit touchthe
Three
Touch the item you want to change
Name
And 20 the name you want to change in the full-size
Character to (20 characters in single-byte)
You can enter
Edit a registered location
Information about the registered location (name, telephone number, marks, sound
effects, position) to change the
You can.
Page 84
84
CRA4803-A <84>
Phone number
Enter the phone number. Power
If you set the story number, power
Search the place from story number
It will be able to. Or
Was, and if you connect the mobile phone
If, pieces of the phone in its place
Will.
2D mark
Registration area, which is displayed on the map
It will change the 2D mark.
Sound effect
The ringing when it approached the registration area
You can set the lath sound effects.
Position correction
It will correct the position of the registration area.
Four
End itwilltouchon
Private mapping
Sound sound effects how
From the setting of the sound effect has been registered location is the vehicle
Effect sounds and approaches within about 500 m
You.
Registration area is more than from the vehicle within about 500 m
In some cases, the effect sounds from close
You.
Or once the sound effect is heard, after 30 minutes
That it is not cycled the power of the machine (engine
It is not re over and) sound effect does not sound.
Than the registered location sound effects, route, and the VICS
Voice guidance takes precedence.
Erase the registered location
One
Clear Touchto(P83)
Memo
Erase All Whenyoutouch,
P85
Procedure
Four
The confirmation screen
View and erase all the registered land the plane.
Two
Touch the registered location you want to erase
85
Registration and editing operation
CRA4803-A <85>
Memo
Sort Whenyoutouch,thefollowingpop
-Up menu appears. Difference Touch
Ido menu appears.
Call date and time the order of sortingthelisttocallchronologicalorder
You.
From the vehicle position
Close order
In order to close the list from the vehicle position
Sort.
2D mark the order Isortbytypeofmark.
Three
Erasing Iwilltouchon
Read menu
Molly Card
Tow and stored on the SD card
It will not read the recording area to the unit.
( P86)
Password
Setting
Save of registration land, used at the time of reading
You set a password to use.
( P85)
Password
Initialization
the set password is initialized
You.
( P86)
Set a password
To do save and read of registered land, the path
Word setting is required.
One
Password setting touchthe
( P85)
Two
Enter the password inputend
It will touch on
Memo
You can enter a password, up to 4-digit half-width number
It is.
Password is set.
You want to save the registered location
One
86
CRA4803-A <86>
Three
Yes Iwanttotouchon
During the registration area to save it, or the power of the machine to OFF,
Please do not remove the SD card.
During the registration area reading is, the power of the machine is turned OFF
Or, please do not remove the SD card.
Password is initialized.
Memo
When performing the initialization of the password at the same time the
All aircraft registered destinations will be erased. To initialize
That case, to save the registration area in advance to the SD card
(
P85)
It is recommended that you.
87
Registration and editing operation
CRA4803-A <87>
You want to clear the search history
If you find a place, where you were looking for automatically detected
It will be stored until the 300 cases as search history
You.
It is possible to clear the search history in the next step
You.
One
Press (menu), seted
Collection the navigation data editing andtouch
Make
Two
Search history erasing itwilltouchon
Three
Touch the search history you want to erase
Make
One
88
CRA4803-A <88>
It wants to erase the traveling locus
It erases the running locus are displayed on the map screen
Thing I can.
Memo
It can also be automatically erase the traveling locus
Vinegar.
"function to the setting"
(P101)
One
Press (menu), seted
Collection the navigation data editing andtouch
Make
Two
Traveling locus erasing Iwilltouchon
89
CRA4803-A <89>
Use of various types of information
Use the FM-VICS information
It receives the FM-VICS information (provided from the VICS Center) in the vehiclemounted antenna, congestion information
You can check, etc. and regulatory information.
The VICS information
VICS (V ehicle I nformation &
Communication System: road traffic
The information communication system), the latest traffic information
Communication system for communicating to the driver
It is.
Upon receiving the VICS information, congestion and accidents, traffic
The land of navigation for the latest information, such as the regulation
You can be displayed on the diagram. In addition, simple ground
It can also be seen in FIG illustrations and character.
Display form of VICS information
The VICS information, from Level 1 Level 3 or
There are three types of display mode in. Dry
Bar is provided from the VICS center, next
You can take advantage of a road traffic information such as.
traffic congestion information (including favorable information)
travel time information traffic failure information
traffic control information parking information
Level 3: Map
Road traffic information to navigation on the map
It will be displayed directly.
Level 2: Simple graphic
Road traffic information in such a simple map illustrations
Broadcast will appear.
Level 1: Character
Road traffic information is displayed in character.
Memo
By the information provider side of the problem, garbled and the net
Error message is displayed, such as a work disorder
It might be.
Page 90
Ninety
91
Use the FM-VICS information
Use of various types of information
CRA4803-A <91>
Kind of VICS mark
The VICS information, mark, such as the following also map
It appears in the above.
Large closures
Disabled car
Work
Street disorder
Chain regulation
Freeze
Wrong way
Entrance limit
Closed to traffic, closed
Accident
Under construction
Inlet closing
One side alternating traffic
Face-to-face way
Lane regulation
Crawl
Automatically sounds the congestion information that was generated on the route
It will guide you in the voice.
Memo
Congestion auto guide, I can ON / OFF.
"machine
It makes the function settings "
(P101)
If the root in the guidance does not exist, the guide Salema
To do.
Congestion check
Congestion Whenyoutouch,canbegeneratedontheroute
traffic information map display and text information and who are
It can be confirmed by voice guidance.
Page 92
92
Use the FM-VICS information
CRA4803-A <92>
Memo
Congestion Eachtimeyoutouch,theastringencyofuptofivelocationsdestination
To the place residence you can be guided by the order.
If the root in guidance is not, and regulation of the area surrounding the vehicle
Only it will display and guide the information.
Memo
When all of the information screen consists of multiple pages,
< , > Ifyoutouch,yousendthepage.
Top / final Whenyoutouch,thefirstpage/top
Final page is displayed.
When all the information has not been acquired, and the current
The first page of the information that is standing acquisition, or the top
Final page is displayed.
Table of Contents Whenyoutouch,toreturntotheVICSmenu
You.
Tuning Whenyoutouch,thebroadcastingstationsofFMmultiplexbroadcasting
You can choose.
"select the station."
(P93)
Page 93
93
Use the FM-VICS information
Use of various types of information
CRA4803-A <93>
Select the station
When receiving the VICS information from FM multiplex broadcasting
Are, you choose a good broadcaster the most receiving sensitivity.
One
(Menu) Press, information on
Touch
Two
Congestion information Iwanttotouchon
Three
Broadcasting station selection itwilltouchon
Four
Touch the way to find a broadcast station
Auto
The VICS broadcast stations, depending on the vehicle position
It will be automatically selected.
List
Choose from the broadcast station list.
Seek
+ , - Touch,ownfrequency
We will do the dynamic tuning. Received
Toko which receives the signals broadcast stations
It will stop in a furnace.
For confirmation of the reception state of the broadcast station
The congestion information screen, broadcasting station name being received, Zhou
Wave number, such as the reception status is displayed.
Reception status display
Tuning method
(Auto / list / seek)
Reception status display, if the reception sensitivity is high
"High", when the reception sensitivity is low, "Low"
It will be displayed.
Page 94
94
CRA4803-A <94>
Use the ETC information
When you connect the navigation interlocking ETC system of dealer installed option
on this machine, ETC car
You can look at the registration information of the stored history information and ETC
board equipment to the soil, a guide at the time of ETC use
Setting of I can.
One
Press (menu), information ETC Itouchthe
Memo
Table from the usage history is a new one until the maximum of 100
It is shown.
When getting on and off the interchange name is unknown,
Appears interchange number.
If you display the history in the vicinity of the ETC gate, roadside
You may not be able to communicate with the wireless device.
Page 95
95
Use of various types of information
CRA4803-A <95>
Do ETC setting
One
ETC setting touchthe
( P94)
Two
Touch the item you want to set,
ON or OFF touchthe
ETC interrupt
Display
When utilizing the ETC, to use
The vinegar interrupt display of such fee
Performs Rukashi not of settings
You.
ETC voice guidance whenusingtheETC,touse
You can either voice guidance such as fee
We will do some setting not.
ACC on time
Alarm display
The engine switch or LOCK
When the Luo ACC, and ETC car
Displays such as soil anomaly on the screen
Performs Rukashi not of settings
You.
ACC on time
Warning voice guidance
The engine switch or LOCK
When the Luo ACC, and ETC car
And it is guided soil anomaly, and more at voice
Performs Rukashi not of settings
You.
Card Without forgetting
It is warning
Whether the engine switch ACC
When the Luo LOCK, and ETC
Notice the forgetting to pull out of the card
It is carried out either by not or set
You.
Use the ETC information
Page 96
96
CRA4803-A <96>
One
Press (menu), information Maintenance youwanttotouchon
( P96)
Two
Touch to select the item
Memo
The check mark in the already items that are Announcement
Click marked with.
Any input 1-5 Whenyouselecttheitemnameofthemenu
You can be set by manually input.
Three
Announcement distance or notice
Day Itouchthe
Example: engine oil exchange
Notice distance informthemileage(km)
Sets by entering the.
Announcement Date
Enter the date to inform
Set you.
Update
Update to the latest setting.
Setting clear
Is all set to unset state
You.
Page 97
97
Use of various types of information
CRA4803-A <97>
To Advanced
One
Advanced Iwanttotouchon
( P96)
Two
It is set to select the item
Automatic notification settings andyourknowledgeoftheexchangetimetotheunit
startup
Setting of whether or not to the racemate
That you will perform.
Setting Erase All
The setting was to inform the timing of items
It will erase all.
Automatic all update
Announcements time has passed item
All I will update.
Notice confirmation screen
It is to date you set the vehicle maintenance
And, the power of the machine ON (ON the engine)
Then, following announcement of the message
There will be displayed.
Memo
Bulletins are notdisplayednext to
When you touch, it does not appear until the next due date
Masu no longer. Todisplaythenexttime you touch to,
It will be displayed every time until you update to the next due date.
To update to the next due date,
P96
Procedure
Three
Screen
In update it will touch on.
Page 98
98
CRA4803-A <98>
Find the serial number
It is used to check the serial number of the machine
You can.
One
Press (menu), information System information Iwanttotouchon
Sensor learning
The current learning state ("3D hybrid mode"
Or "in the sensor initial learning") is displayed
You.
Trip meter / vehicle speed pulse number
Current number of trips the unit is aware, pulse
The number will be displayed.
Memo
Trip meter or vehicle speed pulse number standingin
To reset the number that has been accumulated when you switch
I can.
Sensor learning Whenyoutouch,utilizethesensor
It can be set. For more information,
"Sensor reset
About "
( P213)
Please visit.
Inclinometer
The top and bottom of the slope that is recognized by this machine is road
It is expressed in the slope.
Distance / azimuth / inclination learning level of (3D)
With respect to distance and direction (rotation of the left-right direction), tilt,
Whether the display of how learning results have been accumulated
Will. When the bar reaches the right end, the degree of learning
It represents that it is a bur highest.
Confirmation of traveling state always passenger performs, driver
Please dedicated to driving.
99
Use of various types of information
CRA4803-A <99>
Memo
Learning degree and the trip meter, vehicle speed pulse number
Failure of this unit, due to repair, it is clear
There is a thing. In addition, depending on the state of the machine,
There may not be accumulated.
Sensor in a state of un-learning, and other than the number of pulses
Display does not have a meaning.
Even the power of this unit to the OFF (OFF the engine),
Trip meter and the vehicle speed pulse number is integrated
You might want.
When the inclination (3D) learning level does not appear, vehicle speed
Pulse is not properly counted. Car
that fast signal input is not connected correctly
I thought you. Please consult your dealer.
Memo
<Previous page / next page> infromswitchingthescreen
Will.
Display case and a "measurement impossible" it does not appear correctly
If it is, please consult your dealer.
GPS antenna
Of GPS antenna connection status is displayed.
When it is properly connected, "OK", it is connected
If not it will be displayed as "not connected". Its
Antenna of the illustrations that are displayed on the right side of the
You can check the reception status of the GPS antenna.
2 in a location with good radio waves received easy to view
This more than bar is good if it is displayed.
To the right, the current positioning state (three-dimensional positioning
The number of / 2-dimensional positioning / Not positioning) and the satellite being
received
There will be displayed. Satellite mark of orange in the positioning
The number of satellites being used, the yellow satellites mark
It shows the number of satellites in the capture. Three or more of Mamoru
Upon receiving the radio waves of the star can be positioning You are here
It will be. For more information about positioning
"In GPS
Positioning Night "
( P204)
Please visit.
Vehicle speed pulse
Currently the number of vehicle speed pulses that the unit is recognized
It will be displayed. "0" is displayed when parked
It is. When driving the vehicle, in response to the speed
Te to the dial tone of "beep", along with the numbers
Bar display will change.
Confirmation of the vehicle speed pulse, in a safe place, slow
Please go (about 5 km / h).
Mounting position
Installation status is displayed on this unit. A while
Hundred
CRA4803-A <100>
Back signal
Connection state of the back signal input is displayed.
The shift lever to "R"
It will be the position of the (reverse)
And the display is put changed over of "HIGH" and "LOW" or
Vinegar. Shifutore while stepping on the brake pedal
And make sure that you operate the bar, it is displayed correctly
Please be. This connection, car forward / reverse
It is intended to determine.
It is possible to correctly detect the forward and backward that it is not connected
Because there may be no, the vehicle position is deviated
There is a case. In addition, Bakkumoni optional
When connected to ter the shift lever
The even when the position of "R" (reverse) and automatic
This switching to the back of the video monitor to
Door can not.
Parking brake
Parking brake status is displayed.
When the parking brake is being applied
"ON", the display "OFF" when it is released
It is. Per while stepping on the brake pedal
And operating the parking brake, it displays correctly
Please make sure that.
Illumination
State Illuminator power is displayed. Car of the scan
When the mall light is lit and "ON",
When you're off it will be displayed as "OFF".
Power-supply voltage
And it is supplied to the unit from the car battery
The power supply voltage is displayed. It is multiplied by the engine
Normal if it is in range of 11V~15 V in the state
Chisuru
101
CRA4803-A <101>
Setting of navigation
Make the function settings
By changing the setting in accordance with the application and preferences, and easy
to use navigation
You can be.
Setting items of navigation, it has been classified into the following three menus for
each function.
Display map
( P102)
Route guidance
( P103)
congestion information
( P105)
One
Press (menu), seted
Collection touchthe
Two
Navigation function setting Touchto
Three
Touch the item you want to change the settings
Make
Memo
When you touch the classification tab, squirrel from the beginning of the function
It can be used to display the door.
Four
I want to touch on the setting
102
Make the function settings
CRA4803-A <102>
Setting details
Map display
* Is the factory default settings.
Auto highway map
"ON"
*
Automatically you want to highway mode.
"OFF"
Automatically and does not in highway mode.
City map
"ON"
*
Street map is displayed.
"OFF"
It appears normal map.
City map boundary display
1
"ON"
It will display the boundaries of the city map on the screen.
"OFF"
*
Without displaying the boundaries of the city map on the screen, you can switch to the
normal screen.
Map color switching
"Time Integration"
Color scheme of the screen will switch at sunset / sunrise time work.
"Illuminating linkage"
*
Color scheme of the screen will switch in the ON / OFF of small lights.
"Daytime color fixed"
It remains always daytime screen.
Traveling locus display
"ON"
*
103
Page 104
104
Make the function settings
CRA4803-A <104>
ETC lane guidance display
3
"ON"
*
ETC lane guidance in the vicinity of the toll of the toll road will be displayed.
"OFF"
ETC lane guide will not be displayed.
General road simple guide
"ON"
It is the voice guidance at the time of root induction simple.
"OFF"
*
It does not perform a simple guide.
Signal Just Us
"ON"
*
It will do the traffic lights just assistance.
"OFF"
It does not signal a machine just assistance.
Interrupt to the AV screen
"ON"
*
It will interrupt display such as intersection guide map even during the AV screen
display.
"OFF"
During AV screen display, it does not interrupt display and intersection guide map.
Toll road attention point-border guidance
"ON"
*
It is guided.
"OFF"
Not being guided.
Railroad crossing guidance
"ON"
*
It is guided.
"OFF"
Not being guided.
Refresh guidance
"ON"
*
It is guided.
"OFF"
Not being guided.
Heart full voice
4
"ON"
*
It will guide you by voice today's date at the time of the first start-up of the day.
"OFF"
It is not guided by voice today's date.
Light lighting guidance
"ON"
*
It is guided.
"OFF"
Not being guided.
e start guidance
"ON"
*
It is guided.
"OFF"
Not being guided.
Congestion auto guide
"ON"
*
Congestion information on the route will be voice guidance automatically.
"OFF"
Congestion information on the route does not automatically be the voice guidance.
Narrow street guidance
"ON"
*
It is guided.
"OFF"
Not being guided.
1 is a function that can only be set when not in route guidance.
105
Make the function settings
Setting of navigation
CRA4803-A <105>
Congestion information
* Is the factory default settings.
Congestion information display object road
"Toll road and general road"
*
Congestion information of the toll road and general road appears.
"Toll road only"
Only congestion information of the toll road will be displayed.
"General road only"
Only congestion information of the general road is displayed.
"Do not show"
Congestion information is not displayed.
Congestion information display
1
"ON"
*
It appears road fill.
"OFF"
It does not appear the way painted.
Steady display
2
"ON"
Based on the traffic jam information, traffic is smooth road appears road fill.
"OFF"
*
Steady display is not.
Regulatory display
1
"ON"
*
Congestion information mark and regulatory sections of the traffic regulation will be
displayed.
"OFF"
Congestion information mark and regulatory sections of the traffic regulations does
not appear.
Parking mark display
1
"ON"
*
Congestion information mark of parking will be displayed.
"OFF"
Congestion information mark of the parking lot will not be displayed.
1 is a function that "congestion information display target road" can be set when
other than "Do not show".
2 When "congestion information display target road" is other than "Do not show",
and is a feature that can be set when "congestion information display" is set to "ON".
Page 106
106
CRA4803-A <106>
Make the Bluetooth setting
Hands-free function and Bluetooth Audio function, such as smartphones cooperation
function Contact
To become use, you will need to pre-set the Bluetooth equipment.
Memo
You can register up to five Bluetooth devices. Switching type or deletion of the
method of Bluetooth devices
"I switch the Bluetooth device"
( P108), "we want to remove a Bluetooth device"
( P109)
Please visit.
If you register a Bluetooth-enabled mobile phone with the AV profile, priority contact
of Bluetooth Audio
It is set as connection equipment. For more information
"How to operate the Bluetooth Audio" ( P140)
The visit Kedah
Sai.
QUICK SETUP
( P15)
You can also set in.
Do Bluetooth settings
One
Press (menu), seted
Collection telephone and communications Bluetooth
Setting ittouchesthe
Memo
Mobile phone menu screen
( P179)
And, Bluetooth
Audio screen
( P140)
In Bluetoothsetting standing in
There is also a way to manipulate the switch.
Two
Touch and select the item to be set
Make
Device registration
Bluetooth to Bluetooth connection
We will register the equipment to this unit. Oh
Luo advance Bluetooth equipment
Go to the Bluetooth set to ON
Please.
( P107)
Equipment change
Bluetooth device to be Bluetooth connection
When you have registered two or more, the manual
It can be switched.
(
P108)
Equipment Delete
The Bluetooth registered Bluetooth
107
Setting of navigation
CRA4803-A <107>
Passkey
Changing the passkey of the unit
I can.
( P109)
Radio launch
ON the radio wave from the unit /
It can be OFF.
(
P110)
Mobile phone di
Forget Chikomi
Guide
After you boot the machine, a predetermined time
The connection of this unit and the mobile phone within
The to ON / OFF a guide if not
Rukoto I can.
( P110)
You want to register a Bluetooth device
One
Device registration itwilltouchon
( P106)
Memo
If the Bluetooth Audio is playing, medium playback
They are cross-sectional. The confirmation message is displayed
Because you will, if you register by interrupting Yes
And if you do not want to interrupt No go choose
Please.
It has already been Bluetooth devices registered five
If, equipmentremoved by touching the Bluetooth machine
Make the deletion of the vessel
( P109)
, Bluetooth
Please do the registration of the device.
Registration completion message appears.
Make the Bluetooth setting
Page 108
108
CRA4803-A <108>
Four
Sure touchthe
One
Equipment change Iwanttotouchon
( P106)
Make the Bluetooth setting
Page 109
109
Setting of navigation
CRA4803-A <109>
Two
Bluetooth devices to switch
It will touch on
Three
Touch to select the item
Hands-free
Using the hands-free function
You use.
Bluetooth Audio BluetoothAudioequipment
It uses as.
Smartphone
Cooperation
Smartphone cooperation machine
It uses the function.
Memo
If set to "hands-free" is
,
If you are set to "Bluetooth Audio",
"Scan
The authors If you set the smartphone cooperation "
Icon is displayed.
When set to "Bluetooth Audio", AV
That it has switched the source to Bluetooth Audio
It becomes a priority connection equipment to be automatically connected to a tree
You.
One
Equipment Delete Iwanttotouchon
( P106)
Two
To Bluetooth devices that you want to delete
Touch
Three
Yes Iwanttotouchon
110
CRA4803-A <110>
I ON / OFF the radio launch
One
Radio wave itwilltouchon
( P106)
Two
ON or OFF touchthe
ON
We will do the radio wave.
OFF
It does not perform the radio wave.
Memo
If you set the radio wave to OFF, registered from the machine
You can not change the recording operation and passkey.
No.
Make the Bluetooth setting
Page 111
111
CRA4803-A <111>
Setting of navigation
Make the volume settings
Guidance volume and hands-free navigation
Adjustment of earpiece volume and ring volume of time, the operation sound
You set the ON / OFF.
Memo
QUICK SETUP
( P15)
In it is also to be set
You can.
One
Press (menu), set
Edit volume settings youwilltouchon
Memo
Setting and editing Telephone and communication volume setting standingin
There is also a way to manipulate the switch.
Two
Touch the item you want to set
Information volume
+
Guidance volume will increase.
Guidance volume will decrease.
Beep
ON
Operation sounds.
OFF
Operation sound does not sound.
Receiver volume
+
Earpiece volume will increase.
Earpiece volume is reduced.
Ring volume
+
Ring volume will increase.
Ring volume will be smaller.
If the operation sound is set to OFF, SD card inserted
Warning sound, such as input failure does not sound. Rather Notes
Please.
Page 112
112
CRA4803-A <112>
Three
Standing in the speaker you want to output
Chisuru
Front L itwillbeoutputfromthefrontleftside.
Front L +
Front R
It will be output from the front left and right.
Front R itwillbeoutputfromthefrontrightside.
Set the volume of the navigation
Page 113
113
CRA4803-A <113>
Setting of navigation
Setting the vehicle information
Toll classification and parking limit of vehicle, length, width, set the height.
Content that has been set here will be reflected in the guidance of the parking and toll
road fee.
Memo
QUICK SETUP
( P15)
You can also set in.
One
Press (menu), set
EDIT touchthe
Two
Vehicle information setting Touchto
Three
Set the contents by selecting each item
Toll segment tollroadduringrunningoffeeku
You set the minute.
( P113)
Parking limited (model) carlimitatthetimeofparking
I set.
( P113)
Parking restrictions
(Vehicle size)
Vehicle dimensions when parking
You set the limit.
(
P114)
Memo
In the case of route guidance during and highway mode, Yes
Fee can not be toll classification settings.
Four
End itwilltouchon
Setting of toll classification
One
Toll segment itwilltouchon
( P113)
Two
Touch to choose the appropriate classification
Setting of parking restriction (model)
One
Parking limited (car) touchthe
( P113)
Two
Touch to choose the appropriate type of vehicle
Make
Indicator of the chosen vehicle lights
is, you can choose continue.
Memo
If there is no corresponding model, nothing is not set
Give me.
Three
Back toTouch
Page 114
114
CRA4803-A <114>
Setting of parking restriction (vehicle size)
One
Parking limited (vehicle size) Touch
and ( P113)
Two
Touch to select the item to be input
Three
Enter the dimensions in reference to such car verification
is, theinputend to touch the
Example: length(L) If you choose
it is possible to continue to enter the other items
You. To terminate the input back to standing
Please to switch.
Memo
To clear once the set value, and of each
In the input screen unset it will touch on.
115
CRA4803-A <115>
Setting of navigation
Make the other settings
We want to correct the misalignment of the vehicle position
If the vehicle position is shifted to, be modified
Can you. In state vehicle position fix you always stop
Please go.
One
Press (menu), set
Edit vehicle position correction andtouch
Make
Two
Vehicle position correction Iwanttotouchon
Three
Touch the 8-direction arrow keys
I adjust the cross-hair cursor to You are here
Memo
Tweak Whenyoutouch,tableof8directionarrowkeys
You can switch the View / Hide.
8 directional arrow keys when you start running while displaying
It is finetuning the 8-direction arrow key Touch to consumption
Succoth is, I can only once.
Four
Decision itwilltouchon
Five
Di Touch the left and right of the rotation arrow
Adjust the car orientation
Six
Decision itwilltouchon
Page 116
116
CRA4803-A <116>
Setting the Security
By the security settings, theft deterrent
Effects and theft prevention effect is I can be expected.
It is always theft Your use of this function
It is not mean lead to prevention. From car
Lock the door and remove the always key when you leave
To, such as basic measures attention on your own
And you will be as you please.
One
Press (menu), settingandediting
- SystemSettings touch the
Two
Security settings youwilltouchon
Security
Function
This unit is once removed from the battery
If that was, passwords match
Unless, you can not use the main function
You can set as
Vinegar. Set security features,
It required at the time of the security release
And password that, you enter it
Set a hint that is displayed when that
To you.
( P116)
Indicator effectivelysetthesecurityfunction
If you were boss, OFF the power of the machine
To (OFF the engine switch)
Then security as a theft prevention
It flashes the utility indicator
It can be set to so
Vinegar.
( P118)
You want to set the security features
One
Security features itwilltouchon
( P116)
Two
Setting ittouchesthe
Memo
If you already a password is set, pa
Of the message does not either change the password
There will be displayed. If you want to change it, yes standing
Enter the current password by switch inputend
It will touch on.
Configuration Tips
Three
Set in a multi-word or
Setting than the fixed sentence touchbyselectingthe
Make
Multi-word
Setting
The words of your choice password
117
Setting of navigation
CRA4803-A <117>
Setting than the fixed sentence offivepasswordfromafixedsentence
It can be set by selecting the tips
You.
Example: When you select a setting than the fixed sentence
Four
The selected tips from five fixed sentence
I want to touch in
Memo
Set in a multi-word whenyouchose,yourpreferred
Words to the input as hints Mino, inputend to
Touch.
Password Settings
Five
Enter the set you want to password
is, theinputend to touch the
Memo
You can enter a password, single-byte or double-byte
Is less than 12 characters.
Six
the set a password and tips
Make sure, theend to touch the
118
CRA4803-A <118>
Three
Sure touchthe
One
Indicator itwilltouchon
( P116)
Two
ON or OFF touchthe
ON
LED flashes.
OFF
LED does not blink.
You want to release the security function
If you want to cancel the security function, the following
It can be operated as below.
One
Security features itwilltouchon
( P116)
Two
Release Iwilltouchon
Three
Yes Iwanttotouchon
Four
Confirmation Touchtothepassword
Enter, theinputend to touch the
119
Setting of navigation
CRA4803-A <119>
View the slide frame
To display the frame indicating the range that allows slide operation
You can be.
One
Press (menu), settingandediting
- SystemSettings touch the
Two
Slide frame display settings andtouch
Make
Three
ON or OFF touchthe
ON
Slide frame appears.
OFF
Slide frame does not appear.
To return the set to the initial state
To return the set function of the state of the factory
Thing I can.
One
Press (menu), settingandediting
- SystemSettings touch the
Two
Setting initialization touchthe
Three
Touch to the item you want to initialize
Four
Yes Iwanttotouchon
Page 120
120
CRA4803-A <120>
To return to the factory default state at once
To return to the factory default state whenyoutouchthetail
Customer is was content and records were set after your purchase
Child to return to the state of the factory at once data
You bet you can.
Once erased data can not be undone. Sufficient
Please operate after carefully.
The required information, please note of in advance.
121
CRA4803-A <121>
Audio Basics
The basic operation of the audio
You want to display the AV source screen
One
At the time of the navigation screen
I press the (audio)
Memo
Operation touch keys, close to touch on whether the 8
Nothing it will disappear and not operate seconds.
AV source icon
122
The basic operation of the audio
CRA4803-A <122>
Memo
Of AV source icon >> When you touch, Table
AV source icon that can not be shown a display
It is. When you touch again, to its original state
It will be back.
In the case of the video-based AV sources such as TV, once the picture
Touch the surface, or to display the operation touch key
Please be et operation.
During the navigation screen display is cut only voice
The Instead, press the (audio), AV source
Screen appears.
Source that is not connected to the equipment is accustomed to use
No.
The steering switch vehicles, MODE scan
It can be switched in turn the source on match
You.
One
Press or the (volume adjustment)
Volume will increase.
Volume will decrease.
Memo
If the guidance voice of navigation in the output, sound
You may not be able to the amount of the adjustment. Guidance sound
It operates in a state where the voice is not output
Give me.
Also to adjust the difference in volume of each AV source
You can.
"source level adjuster setting"
(P147)
When the guidance voice output of the navigation, automatically
To or smaller turn off the sound of the audio
I can also.
"mute setting" (P148)
The visit
Give me.
The steering switch vehicles, - / + scan
You can adjust the volume with the switch.
Page 123
OFF
It does not display the clock.
Reception of emergency warning broadcasting (EWS)
About Shin
EWS (Emergency Warning System)
And receives the emergency alert on TV, disaster
This is a system to inform the occurrence. Seg
Receiving a broadcast, there has been EWS at the viewing program
If, emergency message with a warning voice
It will be displayed.
The playable media on this unit
Type and file of
Renewable media in this unit and the file format
The combination of is limited. Following
You look at the table, correspondence of the variable () whether ()
Mounted on a check, please use.
In addition, the file format and extension of the corresponding Allowed
Even if, such as in how to create a file
drunk may not be played
(
P201)
. Also, it is described in the table below
You can not play file format other than.
File
Format
Extension
CD-R / RW
SD card
WMA
.wma
MP3
.mp3
AAC
.m4a
WAV
.wav
Page 124
124
CRA4803-A <124>
Listen to the radio
We'll explain how the reception of radio.
Receive a radio broadcast
One
The AV source to FM or AM
and ( P121)
Two
Touch the station you want to receive
Memo
List table preset frequency and broadcasters
It is shown.
Also broadcast stations have been listed, it is here of the ring
Some border and radio wave condition, it may not be received
There.
Display switching
The frequency scale display screen
It will switch. Frequency scan
The Touch with kale display screen
And that, turn off the list display screen
Instead you.
( P124)
Scan
If you touch more than 2 seconds, reception
It is automatically a good broadcaster of state
It is registered in the user preset
You recorded.
( P126)
SEEK also
The SEEK
( P124)
When operating in the slide:
During radio reception in the frequency scale display screen
Is, it can be done following the slide operation. Sly
For de method of operation,
"Slid"
(
P22)
Please visit.
Page 125
125
It wants to receive a broadcast
CRA4803-A <125>
slide
It met the preset channel
You flops.
slide
The da preset channel
You luck.
slide
It will cancel the mute.
slide
We want to mute.
Choose the type of preset
broadcasting station that the user has registered (user preOr call the set), previously the unit to
Broadcasting stations near the vehicle position has been registered (d
Choose whether calling a rear preset).
One
Preset switching touchthe
( P124)
SEEK / SEEK
Touch to
Station you want to register with (frequency)
The pick ( P124)
Three
2 to the frame of the registration you want to preset
Touch sec
126
CRA4803-A <126>
Automatic registration of broadcasting stations
User pre-set a good broadcaster reception state
You can be automatically registered into the city.
One
Scan itwilltouchmorethan2secondsto
( P124)
CANCEL Ifyoutouchin,stoptheautomaticregistration
You.
127
CRA4803-A <127>
It wants to receive a broadcast
It wants to receive traffic information
One
Make the AV source in the traffic information
( P121)
I press the
We want to 1 620 kHz.
I press the
We want to 1 629 kHz.
When operating in the slide:
During the traffic information received, the following slide operation
Can you. For details on how to operate the slide,
"Slid"
( P22)
Please visit.
slide
You will receive a 1 629 kHz.
slide
You will receive a 1 620 kHz.
slide
It will cancel the mute.
slide
We want to mute.
Memo
When you are receiving traffic information, and then adjust the volume
If that, be set as the volume for traffic information
You can. The volume switch to other AV source
To be adjusted, then when receiving the traffic information,
You can listen at the volume set last time.
128
CRA4803-A <128>
Receive a one-segment broadcasting
One
Make the AV source to TV
( P121)
When the parking brake is being applied in the stop, you can see the image on the
monitor. Run
For row in safety, it does not appear in the video on the monitor.
Page 129
129
See the one-segment broadcasting
It wants to receive a broadcast
CRA4803-A <129>
If you operate the buttons on the body:
Or
The
Push
To order a preset channel
I send to
Or
The
Long press
It can be received physical channel
Icon List
By the broadcast content, the next icon AV source
It appears to the nest plate.
Stereo broadcasting
Yes more than one voice
Yes subtitle
Receiving sensitivity of the antenna
Conversion cut the type of preset
Obtain
broadcasting station that the user has registered (Yu Zapuri
Or call the set), previously the unit to
Broadcasters around the vehicle that are registered (e Rear
Choose whether calls the preset).
One
Preset switching touchthe
( P128)
Page 130
130
See the one-segment broadcasting
CRA4803-A <130>
You want to register a broadcast station manually
Manually up to 12 stations to the user presets
You can register (manual preSet).
One
You want to "User Preset"
( P129)
Two
CH / CH
Touch to registered
To select the station you want to record
( P128)
Three
Preset list you want to register
It will touch more than 2 seconds in the frame
Page 131
131
See the one-segment broadcasting
It wants to receive a broadcast
CRA4803-A <131>
You want to view the program content
It will display the program content of the program being viewed.
One
Program content touchthe
( P128)
Program name
Icon
Program content
Memo
Exit Whenyoutouch,toreturntothenormalbroadcastscreen
You.
CANCEL Ifyoutouchin,stopthescan
You.
Switch the subtitles
When there is a subtitle to the program, the language and the table of subtitles
It switches the shows of ON / OFF.
One
Subtitle switching touchthe
( P128)
132
See the one-segment broadcasting
CRA4803-A <132>
To the function setting of one-segment
Set the function in receiving one-segment broadcasting
You.
One
Press (menu), set
Edit Audio TV set in
Touch
Two
Select the station
Relay station + affiliate stations
Relay station-affiliated stations automatically
Looking for you.
Relay station
We are looking for a relay station automatically.
OFF
Relay station-series station Sagashima
To do.
Page 133
133
Use music disk
CRA4803-A <133>
Listen to the music CD
We'll explain how to basic playback of music CD.
Reproduce
One
To insert the disk ( P27)
Push
Track down / up
Or
The
Long press
Rewind / fast forward
When operating in the slide:
During CD playback, the following slide operation line
For example you. For details on how to operate the slide,
"Scan
Ride Operations "
( P22)
Please visit.
slide
I will up the track.
slide
You go down the track.
slide
It will cancel the mute.
slide
We want to mute.
Memo
It is already the disk you want to play has been inserted
If so, please switch the AV source.
(
P121)
Order to perform such as a disk discrimination is time before playback
Between takes.
For disks that can be played back
"Play can Ru
Kind of disk "( P200)
Refer to the Teku 's
Sai.
Album name, song title, artist name, CD Only if the information can be obtained from the TEXT display of
Will. In otherwise, the table as below shown are
You.
Album name: No Title
Music name: No Title
Artist name: No Name
Music data (CD) and WMA / MP3 data
Page 134
134
Listen to the music CD
CRA4803-A <134>
Play to choose from the list
To view the list, direct election the song you want to play
Bukoto I can.
One
Song list itwilltouchon
( P133)
Two
Touch to a song (track) you want to listen
Make
Memo
To return to the normal playback screen, end or Back
It will touch on.
Repeat Play
to be played repeatedly the specified range
You can. For example, the range of repeat play
If you specify to TRACK REPEAT, during playback
You can listen to repeatedly track.
One
Repeat Iwilltouchon
( P133)
REPEAT
This is the normal playback state. It is playing
I will repeat the disk.
TRACK
REPEAT
Track of playing (the song)
Repeat.
Memo
It is beyond the scope of repeat playback during Repeat Play
That operation (TRACK REPEAT during the selection of music operation, etc.)
If you do, place the range of repeat play is changed
There is a case.
Aiko the selected repeat play range on the screen
It is displayed in emissions but, ALL is the normal playback
REPEAT does not appear on the screen.
Random play
You can play by changing the song order.
One
Random touchthe
( P133)
Page 135
135
Use music disk
CRA4803-A <135>
Reproduce
One
To insert the disk ( P27)
Sai.
slide
It will upload the file.
slide
I will down the file.
slide
It will cancel the mute.
slide
We want to mute.
Memo
It is already the disk you want to play has been inserted
If so, please switch the AV source.
(
P121)
Order to perform such as a disk discrimination is time before playback
Between takes.
For disks that can be played back
"I can play
Kind of disk "( P200)
It's going reference to
Sai.
ID3 Tag / WMA Tag
( P202)
Title from
If you can get the information, song title or album
Name, artist name is displayed.
The following is if you did not get the title information
It appears as.
Album name: folder name
Music name: file name
Artist name: No Name
Place there is an Author information of Tag at the time of the WMA
If, to display as an artist name.
file that DRM (digital rights management) has been set
Il can not be played.
Music data (CD) and WMA / MP3 data (CD-R /
Play the disk where the data of RW) are mixed
If it is played CD only.
136
CRA4803-A <136>
Play to choose from the list
To view the list, direct election the song you want to play
Bukoto I can.
One
Song list itwilltouchon
( P135)
Memo
Song list andalongertouch,therootfolder
It will display a list of the Dah.
Two
standing want to listen to music (file name)
Chisuru
Memo
Of the top hierarchy folder When you touch
Contents I Lists.
The folder name in the folder list display
List When you touch, the contents of the folder
Displays.
Folder number up to 192, which is displayed in the list,
Number of files is 255.
Repeat Play
It is played repeatedly the specified range
I can. For example, the range of repeat play
Random play
You can play by changing the song order.
One
Random touchthe
( P135)
Memo
If the range of repeat playback of FILE REPEAT,
If ON random playback, repeat playback
Automatically cut converted to range FOLDER REPEAT
Wari you.
FOLDER REPEAT and the other in random play
If you play a song of the folder, FOLDER
REPEAT is no longer, again of random play only
It will be raw.
137
CRA4803-A <137>
SD
Use the card
How to SD of operation
Operation of music files in the SD card that is connected to this unit (WMA / MP3 /
AAC / WAV)
We will describe.
And out of the SD card, please go in established procedure.
"out of the SD Card"
(P28)
If you do out in the different procedures, there is a case where the data on the SD card
may be damaged.
Memo
This unit supports the following media.
SD card: maximum capacity 32 GB, file system FAT 32/16, SDHC support
For playable files
"Media and file types that can be played on this unit" ( P123)
Please visit.
Reproduce
One
Make the AV source to SD
( P121)
It is played from a file that was last playing
You.
Folder No. /
Album name
File type
Of the file being played
Elapsed time
Artist name
Music name
File No.
Song list
It will show the song list.
( P138)
Six
During playback, you will pause. To stop one o'clock
During stop it will resume playing.
folder thefolderIwilldown.
Folder
slide
It will upload the file.
slide
I will down the file.
slide
It will cancel the mute.
slide
We want to mute.
Page 138
138
CRA4803-A <138>
Memo
The Tag to MP3 / WMA / AAC file during playback
If the information is present, the song name and album name,
Artist name is displayed.
If and WAV files can not be retrieved the Tag information
It appears as follows if Il.
Album name: folder name
Music name: file name
Artist name: No Name
Place there is an Author information of Tag at the time of the WMA
If, to display as an artist name.
Folder No. is, Yu the hierarchy of deep folder
Order to the percentage that was found earlier from the file system
Ri swung.
File No., the file in the same folder
It is allocated in the order in which they are found from the system.
Further, files in the media playback order which is connected
It will depend on the configuration.
file that DRM (digital rights management) has been set
Il can not be played.
Two
touch to want to listen to the song (file)
Make
Memo
Of the top hierarchy folder When you touch
Contents I Lists.
If you touch the folder name, the folder
It will list the contents of a Zehnder.
Folder number up to 300, which is displayed in the list,
Number of files can be up to 5 000.
Repeat Play
It is repeatedly playing a specified range
Can you.
One
Repeat Iwilltouchon
( P137)
How to SD of operation
Page 139
139
SD
Use the card
CRA4803-A <139>
Random play
By changing the playback order you will be able to play.
One
Random touchthe
( P137)
How to SD of operation
Page 140
140
CRA4803-A <140>
How to operate the Bluetooth Audio
That wirelessly connect a Bluetooth device and this unit corresponding to the AV
profile
In, you can play the music data in the Bluetooth Audio equipment with this unit.
The type and version of the AV profile, among which are functional and display can
be operated
Contents will differ.
Connection profile
Voice transmission
Music selection operation
Special playback operation
Information display
A2DP Ver1.0
Sign up
To you have a Bluetooth Audio equipment
To advance Bluetooth in this unit
You need to register the Audio equipment.
Reproduce
One
The source to Bluetooth Audio
to switch ( P121)
Song list
It will show the song list.
(
P142)
Display switching
It switched to the play list screen
You.
Three
Play. During the pause, play
My resume.
Eight
It will pause.
group Iwilldownthegroup.
Groups
141
How to operate the Bluetooth Audio
B
l
u
e
t
o
o
t
h
A
u
d
i
o
I use
CRA4803-A <141>
Repeat
It switches the repeat range.
(
P142)
Random
The random play I ON / OFF.
( P142)
Disconnect
This unit and of Bluetooth Audio equipment
It will release the connection. Bluetooth
For Audio equipment are not connected, andthemachine
Vessel connection appears.Touch
line connection from the navigation side by
There you.
( P143)
Bluetooth
Setting
In addition to the settings of Bluetooth devices
Vinegar.
( P106)
Playlist screen
Show play list that contains the currently playing song
To you. Selection of music in the same play list is possible
It is a function. I want to song selection from another playlist
Huang,
"Playing by selecting from the list" ( P142)
Please visit.
Playlist item
Play the selected track.
If you operate the buttons on the body:
Or
The
Push
Track down / up
Or
The
Long press
Rewind / fast forward
When operating in the slide:
Bluetooth Audio during playback, the following slide
Ido operation done. Method of operating the slide
For,
"Slid"
( P22)
The visit
Give me.
slide
I will up the track.
slide
You go down the track.
slide
It will cancel the mute.
slide
We want to mute.
Memo
Automatically If the playback does not start, 3 standing
Please to switch.
By your Bluetooth Audio equipment
Is, 3 playback does not start when you touch the
There is a case. In that case, Bluetooth
Please let me start playing the Audio equipment side.
Depending on the Bluetooth Audio equipment, rewind and / fast
There are times when it does not appear as if the sound comes out in Feed
You.
If A2DP connection only 3 and 8 and Misao, such as
Create touch key can not be selected. In that case
Is, I'm going to operate in the Bluetooth Audio equipment side
Sai.
In Bluetooth Audio use, hands-free equipment
When you use the ability and phone book transfer function, temporarily
Function of Bluetooth Audio will stop.
Even in the case of A2DP + AVRCP connection, depending on the model
Theory that has been described in the case and this book can not be operated Te
You might want to behave differently from the Ming.
Page 142
142
How to operate the Bluetooth Audio
CRA4803-A <142>
Play to choose from the list
To view the list, direct election the song you want to play
You can to drive.
One
Song list itwilltouchon
( P140)
Two
Touch the song you want to hear
Repeat Play
It is played repeatedly within a specified range
You can.
One
Repeat Iwilltouchon
( P141)
Random play
repeat the chosen
Playback
In range, and change the song order
You can play Te.
One
Random touchthe
( P141)
Page 143
143
How to operate the Bluetooth Audio
B
l
u
e
t
o
o
t
h
A
u
d
i
o
I use
CRA4803-A <143>
Of Bluetooth Audio equipment
About connection
If the temporarily connected is disconnected
Bluetooth Audio connection to this unit was successful
Equipment temporarily for the following reasons
If a Bluetooth connection is disconnected, automatically
It will re-connect to.
If you switch the AV source
If you OFF / ON the ACC
If you have made a phone book transfer
If the radio waves launch was OFF / ON
To start a connection with the Bluetooth Audio equipment
You.
Page 144
144
CRA4803-A <144>
Use the AUX
When you connect an external audio device such as a portable audio player to this
unit, the
You can hear the voice as AV source of this unit (AUX).
Memo
To connect an external audio equipment to this unit, you need a commercially
available 3.5 mm mini-plug cable.
Page 145
145
CRA4803-A <145>
Setting Audio
Make a set of audio
To your liking, you can be set, such as audio of the sound and function.
One
Press (menu), seted
Collection
Audio
It will touch on
Two
Audio settings youwilltouchon
Two
|
, |, |, \before Touch
And to adjust the balance of the rear left and right that
Balance of the front and rear left and right of the sound at the position of the cursor
You can see the nest.
Page 146
146
Make a set of audio
CRA4803-A <146>
Loudness setting
The factory is as follows.
Setting: "OFF"
Effect: "MID"
One
Loudness setting touchthe
( P145)
Two
ON touchthe
If you do not exert the loudness, OFF the
Select this.
Three
Or
In LOW / MID /
Set from HIGH
Equalizer settings
The factory is "FLAT".
One
Equalizer settings Iwanttotouchon
( P145)
Two
Touch your favorite setting
Off
Click
To
Re
Over
Mosquitoes
Over
Breakfast
SUPER BASS basshasathicknessofpowerful
A bass will sound.
POWERFUL bassandtreblehasathickness,
Up-tempo song Meri
You will hear the needle well.
NATURAL
In a natural balance, listen
A pleasant sound that is not tired
Play.
VOCAL
Mid-high range is has a thickness, Shin
The Kiwa-ritsu the Biya Kana vocal
Make myself understood you.
FLAT
It is not the correction of sound. Setting
The boss was equalizer curve
By switching to alternate with, equalizer
Ensure the effect of the riser
, Please use when.
CUSTOM1 ,
CUSTOM2
CUSTOM is registered in memory
Call the adjustment value that was recorded
You.
Memo
CUSTOM1 willberegisteredforeachAVsource
But, those made in the same setting is as follows.
- FM, AM
- CD, CD-R / RW
Page 147
147
Make a set of audio
CRA4803-A <147>
Setting Audio
We want to correct the equalizer
your chosen factory curve, at each frequency
It is possible to correct the finer levels
You. The corrected values are registered in CUSTOM1
It is.
Memo
CUSTOM2 correctionvalueisperformedbyselectingthe
It will be registered in CUSTOM2.
Already equalizer settings
( P146)
In,
CUSTOM1 case registered a correction value to, here
In the corrected value is overwritten.
One
Choose the factory curve
( P146)
Two
Advanced Iwanttotouchon
Three
To select the frequency to be corrected, or
Other the level by touching the
Correct
1 0 0 H z, 3 1 5 H z, 1. 2 5 k H z,
You can choose the frequency from 3.15 kHz, 8 kHz.
2 dB your between -12 dB ~ +12 dB
It can be adjusted to the door.
Source level adjuster
Setting
The factory is " 0 dB".
Memo
The volume of the other AV sources relative to the volume of the FM
To adjust, when listening to FM, the saw
It is possible to set the scan level adjuster
No.
It is registered to each AV source, but in the same setting
One
Source level adjuster
Set totouchthe(P145)
Two
+ or - youwanttotouchon
Each 2 dB in the range of -8 dB ~ + 8 dB
It can be adjusted to.
Page 148
148
Make a set of audio
CRA4803-A <148>
Mute setting
The factory is as follows.
Mute timing: "Telephone"
Mute Level: "- 20 dB"
One
Mute setting touchthe
( P145)
Two
Touch the item you want to set
Mute timing
Guidance and telephone
Voice guidance and hands-free communication
The volume of the audio at the time of arrival of the
My Lower.
Phone
At the time of arrival of the hands-free phone call
It will lower the volume of the audio.
OFF
It does not reduce the volume of the audio.
Mute level
-10 DB
It will be the volume 1/3.
-20 DB
Volume will be 1/10.
MUTE
Volume will be 0.
Page 149
149
CRA4803-A <149>
Use the camera function
Use the back guide monitor
Back guide monitor options, Asis a driving operation of the recession (especially
during parking)
Collected by. Guide lines that are displayed as a reference retreat operation in the car
behind the video, audio proposal
By driving operation in accordance with the internal, easily parked child also one
weaker parking
You bet you can.
(Display setting of the combined guide line to your car will be made in dealer)
Back guide monitor Nitsu
Notes of stomach
PLEASE NOTE
Please driving with care without overconfidence this function.
Situations such as road-specific characteristics and the road surface, also of driving
operation
The pre-dispersion and, due to the correction state of the angle sensor
You may not be able to park on the measurement position.
This function must be set in each model. And therefore
When such as your replacement purchases the car, put the machine to the other car
The back guide monitor set in the always dealer when changing
Please use the changed value of the (vehicle data)
(In other cars may not accustomed to use this function
Masu).
Please do not overestimate the back guide monitor. One
As well as general of the car, be sure to check behind and around the safety directly
Please carefully recession while. In particular, it parked around
It's going to avoid contact with such as car and obstacles are
Sai.
And, never to retreat while watching the screen only
Give me.
The actual status and image are reflected on the screen are different
Yes, you can hit the car and retreat to look at the screen only,
There is a possibility to cause an unexpected accident. To retreat
Rutoki, always cheap in such visual and mirrors behind and around
Memo
Due to the nature of the lens of the camera, and Ya who reflected on the screen
Obstacle is different from the actual position and distance.
Notes on camera
The camera, attached to the rear of the vehicle
Masu (mounting position of the rear of the vehicle by vehicle type
Location is different).
PLEASE NOTE
The late back guide monitor is not working properly
Please note the following things because there is a record.
Page 150
150
Use the back guide monitor
CRA4803-A <150>
Select the guide how how
The back guide monitor has the following three modes.
course display mode parking guide line display mode parallel parking guide mode
When you parallel park (garage)
Course display mode or parking guide line display,
It uses the mode.
Course display mode
( P152)
Expected course line such as that linked to the handle operation
In this mode, but is displayed.
Parking guide line display mode
( P155)
Crosscut point of handle (parking guide line)
This mode is displayed. And accustomed to vehicle sense
Was better (and parking without the need for a course display mode
possible person), please use.
When the parallel parking
Column guide mode or parking guide line table,
It uses the display mode.
Column guide mode
( P157)
In most parallel parking by the screen display and voice guidance
This mode is for assistant.
Parking guide line display mode
( P166)
Crosscut point of handle (parking guide line)
This mode is displayed.
In the parking without the need for a column guide mode
Do not be used to kill people and column guide mode
Please use such as in Itoki.
Course erase
Column guide
Please check around the vehicle directly
Re-voice
Guide stop
Please check around the vehicle directly
Course erase
Column guide
Please check around the vehicle directly
Course erase
Column guide
Please check around the vehicle directly
Page 151
151
Use the back guide monitor
CRA4803-A <151>
Use the camera function
152
Use the back guide monitor
CRA4803-A <152>
Memo
By the situation of the car and the road surface, reflected range may be different.
The range that is reflected in the camera there is a limit, those at the bottom of the
near both ends and bumper of the bumper is not reflected.
Since the back guide monitor of camera you are using a special lens, the sense of
distance of the image reflected on the screen actually
Distance with me is different.
When the following circumstances, the screen may be difficult to see, but it is not a
malfunction.
153
Use the back guide monitor
CRA4803-A <153>
Use the camera function
distance reference line (green)
It will show the distance of the car backward (from bumper rear end).
it represents approximately 0.5 m away.
distance reference line (red / yellow) I shows the distance of the car backward
(from bumper rear end).
it will work with the steering wheel operation. It will move along with the expected
course line.
In each of the center position, about 0.5 m away (red), about 1 m away (yellow) is
shown
To you.
handle error occurs when not in straight (straight state)
You.
In the above screen, the actual distance (red distance guide lines are shown: about 0.5
m away,
Yellow: Table than about 1 m away), on the right side of the close position, on the left
side of the distant position
It is shown.
PLEASE NOTE
Due to the number of passengers, load capacity, the position indicated by the guide
line of the screen will change. Always backward and surrounding safety
Please driving while checking directly.
when the handle is shifted straight predicted course in (straight state) and the vehicle
width extension line is, as much as possible to bend
There is no such corner curve, please traveling more than about five minutes a little
road of congestion in advance. Still, such repaired
Itoki, please have it inspected by the dealer.
Car width extension lines appear wider than the actual car width. When you retreat,
safety directly always behind and around
Please driving while checking.
Memo
Course erase Whenyoutouch,theexpectedcourselinevehiclewidthextensionlines
willnotbedisplayed.Also,atthistimedistanceeyes
Cheap line is fixed (not in conjunction with the steering wheel). Coursedisplay to
return to the original When you touch.
Memo
If you have not become a path display mode, please course display mode.
"display of the parking guide line"
(P171)
Course erase
Column guide
Please check around the vehicle directly
<Car condition>
Page 154
154
Use the back guide monitor
CRA4803-A <154>
Two
By operating the handle so that the predicted course line enters into the parking
space,
It will slowly retreat
Three
Once the car back is entered in the parking space, the vehicle width extension
lines and the parking space
As the distance between the left and right of the section line is much the same in
the vicinity of the position of the car,
I operate the steering wheel
Four
Once the parallel section line of parking and vehicle width extension lines,
straight handle
In (straight state), until the car enters all the parking spaces, slowly retreat
Make
Course erase
Column guide
Please check around the vehicle directly
Expected course line
Course erase
Column guide
Please check around the vehicle directly
It will be about the same interval
Section line of parking
Vehicle width extension lines
<Car condition>
Parking space
Course erase
Column guide
Please check around the vehicle directly
<Car condition>
<Car condition>
Page 155
155
Use the back guide monitor
CRA4803-A <155>
Use the camera function
Memo
When you park, because the actual situation with the video of the screen there is a
different thing, please be sure to check directly.
Distance may appear to parallel the guide line and the rear end of the parking space
screen, there may not be actually parallel to.
When parking section line there is only one side, parallel to the vehicle width
extension line and the left edge of the parking space (right) screen
This may look (see below), there may not be actually parallel to.
The parallel parking (parking guide line display mode)
Screen of seeing how
vehicle width extension line
It shows the measure of the course when it was straight back the car.
You can display wider than the actual car width.
distance guide lines
It will show the distance of the car backward (from bumper rear end).
it represents approximately 0.5 m away.
parking guide line
Recession by turning the handle to the full (most small turn) the indication of the
course of time
I shows.
It is a measure of the position to manipulate the handle to the parking time.
PLEASE NOTE
Due to the number of passengers, load capacity, the position indicated by the guide
line of the screen will change. Always backward and surrounding safety
Please driving while checking directly.
Car width extension lines appear wider than the actual car width. When you retreat,
safety directly always behind and around
Please driving while checking.
Memo
Course erase Whenyoutouch,thevehiclewidthextensionlines,parkingguideline
willnotbedisplayed.Route display andtouch
Then it will return to the original.
Course erase
Column guide
Please check around the vehicle directly
Section line of parking
Course erase
Column guide
Please check around the vehicle directly
156
Use the back guide monitor
CRA4803-A <156>
We want to start a parallel parking
If you want to park in the parking space of the following procedure in reverse
direction, the steering will be all right and left reversed.
One
Make the shift lever to the R (reverse)
The video of the back guide monitor is displayed.
Memo
If you have not become a path display mode, please course display mode.
"display of the parking guide line"
(P171)
Two
The stop parking guide line is retracted to fit the partition line of the left edge of
the parking space
Memo
When you retreat to match the partition lines and the parking guide line as of the
screen, in the case where the width of the parking space of about 2.2 m
It will enter almost in the center. Please adjust the in stop position according to the
width of the parking space.
Three
Turn the handle to the right full, slowly retreat
<Car condition>
Course erase
Column guide
Please check around the vehicle directly
Compartment line
Parking guide line
Course erase
Column guide
Please check around the vehicle directly
<Car condition>
Page 157
157
158
Use the back guide monitor
CRA4803-A <158>
Flow of screen and audio
<Screen 1>
<Screen 2>
<Screen 3>
<Screen 4>
<Screen 5>
Re-voice
Guide stop
Please check around the vehicle directly
Green vertical line, to retreat to fit to the rear end of the car, which is parked next to.
"Behind the green vertical line next to the car
Stop by back until it fits. "
Audio assist
Re-voice
Guide stop
Please check around the vehicle directly
Retreat to here.
Re-voice
Guide stop
Please check around the vehicle directly
To match the location where you want to park the green frame.
and "while stopped, or the handle
By I, and parking space the green frame
It will fit in. "
Audio assist
Re-voice
Please check around the vehicle directly
Once you adjust the "frame, the handle
Check the periphery of the vehicle to the left
While it will be back. "
Audio assist
Re-voice
Please check around the vehicle directly
Green of the curve I retreat to fit on the left side of where you want to park.
Re-voice
Please check around the vehicle directly
Where we want asked the car "green line
If there on, the handle stopped
It will crosscut the way to the right. "
Audio assist
Re-voice
Please check around the vehicle directly
And distance reference line as a reference, to retreat to confirm the peripheral visually
and mirrors.
"The handle intact, car
Back while checking both peripheral
To you. "
Audio assist
Page 159
159
Use the back guide monitor
CRA4803-A <159>
Use the camera function
PLEASE NOTE
In no road a flat-straight such as curve and slope, please do not use.
Please operation must be performed in the state that stopped the car steering wheel
operation.
Memo
If you want to cancel the guide, you can touch the guide stop.
If you want to hear the voice guidance again, and then touch to re-voice.
Volume of voice guidance it can be adjusted.
"Setting the column guide of volume"
(P170)
Two
160
Use the back guide monitor
CRA4803-A <160>
Three
Check the position of the car, touching the column guide
Cormorant than rear tire of the car, which is parked on the screen
We will make sure that the part of the white is reflected
Please.
Before to the correct position the car when it is not reflected
The advance is to retry the operation.
Four
Once you have verified that the stopped car in the same position as the displayed
screen,
Next Iwanttotouchon
Memo
This display omitted from the next time whenyoutouchon,thisscreenwillnotbe
displayed.Again,Iwouldliketodisplay
Huang
"Display of the beginning of the tips"
( P171)
Please reference to.
Guide stop Ifyoutouch,youreturntothepreviousscreen.
Five
If you are guided by the voice, the green while in the handle straight (straight
state)
Stop vertical line is retracted to a position that meets the rear end of the car,
which is parked next to
Retract the car
<Car condition>
Re-voice
Guide stop
Please check around the vehicle directly
Green vertical line
"Behind the green vertical line next to the car
Stop by back until it fits. "
Audio assist
Re-voice
Guide stop
Please check around the vehicle directly
The stop is retracted to here.
Green vertical line
Course erase
Column guide
Please check around the vehicle directly
Page 161
161
Use the back guide monitor
CRA4803-A <161>
Use the camera function
Memo
When the recession is not straight (straight state) the handle, there is a thing that
would go to the next voice guidance
You. In that case, first to advance the car to a position to stop the car, please try again.
Even a shift lever to a position other than R (reverse), and returned to the R (reverse)
within 10 seconds, this screen
It will be back.
Six
When you see the green frame is guided by the voice, the handle to the left while
stopped
Turn to, to match the location where you want to park the green frame
Re-voice
Guide stop
Please check around the vehicle directly
and "while stopped, or the handle
By I, and parking space the green frame
It will fit in. "
Audio assist
162
Use the back guide monitor
CRA4803-A <162>
PLEASE NOTE
Please make sure that there are no obstacles in the green frame always. If there is an
obstacle in the green frame, the column
Guide mode can not be used.
When you match the location where you want to park the green frame, car green line
extending always in front is parked in front
Please do not take to the tire. And parked in front Together to the point where you
want to park the green frame
If it takes the car you are, please combined in a range that does not take.
Memo
Message may be displayed in the screen.
By-frame becomes red, message, such as the right is displayed
Et al., It can not be the guide, and return the handle
Give me.
Even if-frame matches the correct parking position, such as on the right
you may receive a message is displayed. In this case, the car
Because you believed that you are too far away from the shoulder, parked next to
Please check the interval (about 1m) of the car you have car.
Seven
When you see the green frame is guided by the voice, the handle to the left while
stopped
Turn to, to match the location where you want to park the green frame
<Car condition>
Re-voice
Please check around the vehicle directly
The extension is applied to the tire
Handle intact
Once you adjust the "frame, the handle
To the left, check the peripheral vehicle
While it will be back. "
Audio assist
Please check around the vehicle directly
Please return the handle does not guide
Please return the handle does not guide
Please check around the vehicle directly
Please return the handle does not guide
Please return the handle does not guide
Page 163
163
Use the back guide monitor
CRA4803-A <163>
Use the camera function
PLEASE NOTE
The right front end of the car to be careful not to hit in front of the obstacle, please
slowly retreat.
Memo
When the recession is not straight (straight state) the handle, following
You may inadvertently go up to voice guidance. In that case,
First to advance the car to a position where stopped the car, we go again
Sai.
Even a shift lever to a position other than R (reverse), and returned to the R (reverse)
within 10 seconds, this screen
It will be back.
Eight
When you see the green curve is guided by the voice, as it is of the state of the
handle
To to retreat to
Green of the curve, it will stop if there a point of the left edge of the position where
you want to park.
164
Use the back guide monitor
CRA4803-A <164>
Memo
When the speed of the recession is too fast, it may guidance is not in time.
Nine
While stopping the car, turn the steering wheel fully to the right
Please operate the handle Always be sure to stop the car.
Ten
When the screen is guided by the switched voice, the handle to the intact
And then to retreat
<Car condition>
The green curve
It fits in here
Green curve
As it is the handle
To to retreat to
Turn the handle to the right full
Re-voice
Please check around the vehicle directly
<Car condition>
"The handle intact,
While checking the periphery of the vehicle
165
Use the back guide monitor
CRA4803-A <165>
Use the camera function
PLEASE NOTE
And being careful not to hit the car that is parked on the left front end of the car to the
front, please slowly retreat.
Eleven
Once the car becomes parallel to the road (or shoulder), straighten the handle
(straight-shaped
Return to Thailand)
Twelve
The distance guide line as a reference, check the front and back of the car must
always visually or mirror, slowly
And stops by recession
When the car is nearly straight, column guide mode will end by being the voice
guidance.
Re-voice
Please check around the vehicle directly
Distance guide lines
"I finished the column guide."
Audio assist
<Car condition>
Page 166
166
Use the back guide monitor
CRA4803-A <166>
And parallel parking (parking guide line display mode)
Screen of seeing how
vehicle width extension line
It shows the measure of the course when it was straight back the car.
You can display wider than the actual car width.
distance guide lines
It will show the distance of the car backward (from bumper rear end).
it represents approximately 0.5 m away.
parking guide line
Recession by turning the handle to the full (most small turn) the indication of the
course of time
I shows.
It is a measure of the position to manipulate the handle to the parking time.
PLEASE NOTE
Due to the number of passengers, load capacity, the position indicated by the guide
line of the screen will change. Always backward and surrounding safety
Please driving while checking directly.
Car width extension lines appear wider than the actual car width. When you retreat,
safety directly always behind and around
Please driving while checking.
Memo
Course erase Whenyoutouch,thevehiclewidthextensionlines,parkingguideline
willnotbedisplayed.Route display andtouch
Then it will return to the original.
Course erase
Column guide
Please check around the vehicle directly
167
Use the back guide monitor
CRA4803-A <167>
Use the camera function
Two
Stops After retreat parking guide line is to fit the left edge of the position that you
want to park
Three
Turn the steering wheel to the right full, slowly retreat
PLEASE NOTE
And being careful not to hit the car that is parked on the left front end of the car to the
front, please slowly retreat.
Course erase
Column guide
Please check around the vehicle directly
<Car condition>
The position where you want to park
Course erase
Column guide
Please check around the vehicle directly
<Car condition>
Page 168
168
Use the back guide monitor
CRA4803-A <168>
Four
Once the car becomes parallel to the road (or shoulder), straighten the handle
(straight-shaped
It will be in Thailand)
The screen to check the front and back of the car must always visually and mirrors to
reference, and finished the parking retracted until the optimum position
You.
Error between the actual road surface and the screen
When the following conditions, will cause an error in the Distance course on the
actual road surface with the guide of the screen (Ira
List shows the case of a standard camera mounting position).
When a steep uphill is in the rear
169
Use the back guide monitor
CRA4803-A <169>
Use the camera function
When a steep downhill is in the rear
when the downhill is in the rear, you will see the distance guide lines in the back than
the actual distance. Down
If there is an obstacle on the hill, it looks like there is in fact than in the vicinity.
Error will also occur in the actual path on the road surface as well as guide lines.
when the car is tilted
Number of passengers, when the tilted car due to load capacity, the actual distance,
the course and the error will occur.
Notes when the three-dimensional object is near
Guide of the screen has a plane product (such as roads) to the target. Threedimensional object with overhang (track
When the clauses of the obstacles, such as the loading platform) is nearby, and so that
it does not collide with the following in mind
Please be in.
170
Use the back guide monitor
CRA4803-A <170>
Distance guide lines
The distance guide lines that are displayed to the road surface, can be determined the
distance between the solid object
To do.
On the screen, it looks like truck is parked in about 1m away by the distance reference
line (the position of the B) or
But, actually to be retracted to the position of A, it will hit.
The screen looks close to A, B, in the order of C, but the actual distance in the A and
C are the same distance, B to A, from C
171
Use the back guide monitor
CRA4803-A <171>
Use the camera function
Display of the beginning of the tips
Is displayed in the column guide mode "the beginning of the
You can set whether or not to display the knack. "
You.
One
Press (menu), settingandediting
- SystemSettings touch the
Two
Back guide monitor settings to
Touch
Three
The beginning of the tips display Itouchthe
Four
will be or to not totouchthe
Five
End itwilltouchon
Display of the parking guide line
Or course display to the parking guide line display mode
Either mode, you can set.
One
Press (menu), settingandediting
- SystemSettings touch the
Two
Back guide monitor settings to
Touch
Three
Parking guide line display Iwanttotouchon
Four
will be or to not totouchthe
Make
It will be in the parking guide line display mode.
are not youwillcoursedisplaymode.
Five
End itwilltouchon
Page 172
172
Use the back guide monitor
CRA4803-A <172>
It is displayed during system initialization
When it came out
Decrease battery desorption battery capacity of
If in such as you have, and the screen during system initialization
There will be displayed.
In this case, you will choose one of the following
Sai.
In a state where the parked car, left the handle sect
After you turn the stomach, turn fully to the right (left
Right it is acceptable in either first).
There is no such possible corner curve,
About 5 minutes following the road that are not congested in advance
The top running.
Returning to the normal screen, it is finished setting.
While the system initialization in screen is displayed
Manotoki is, you will have it inspected by dealer
Sai.
Memo
On the screen during system initialization, touch the Help
And, it will be able to display how to operate.
Do displayed on the screen, the normal picture
This is the setting Exit Returning to the surface.
During system initialization, or help screen is displayed
When the still be, and it will undergo inspections dealer
Please.
Exit Whenyoutouch,youreturntotheoriginalscreen.
Battery of desorption, or
When it was replaced put this unit
Battery of desorption, or the machine to another car
Such as in the case of recombinant put, a confirmation screen is displayed
It is.
In this case, the following operation or reseller
Setting is required.
Yes Whenyoutouch,thesettingoftheguideline
It will be deleted. Moth that is tailored to your car
The display setting of lines of latitude, ask the dealer
Give me.
No Touchto,anddisplaytheguideline
And then, it will be able to mirror the rear of the car.
(When it was replaced put the unit in another car, was placed
guide line a table of car that was set before changing
Is indicated)
Returning to the normal screen, it is finished setting.
173
CRA4803-A <173>
Use the camera function
Use the back monitor
When fitted with optional back monitor, and shifts to reverse gear, the unit
Automatic behind the camera video and guide lines on the monitor screen of the (car
width and sense of distance of vehicle
You can mirror the auxiliary line) to compensate for the sense (the display of the
combined guide line for your car
Setting I will do in the dealer).
When replacing the tires, please consult your dealer. When you replace a tire, screen
There is an error occurs in the position indicated by the distance guide lines and guide
lines to be displayed in.
PLEASE NOTE
Please do not overestimate the back monitor.
This unit (back monitor), a confirmation of such obstacles
Please use as an auxiliary means for.
When such as raindrops is attached to the camera unit, reflected adversely
There is Kunar fear.
The vehicle of the situation (the number of passengers, load capacity), and the field
Position indicated by the surface of the guide line will change. It has to,
Luck while checking the rear and peripheral safety directly
Please be rolling death.
It is retracted while looking at the only monitor screen
Please do not absolutely. Always room mirror,
The combination of door mirrors, rear and the surrounding safety
Please be fully confirmed.
The Do not use in situations such as:
There. The frozen or, slippery road surface, also
The snow-covered road back door is not completely closed
When the tire chain, use the emergency tire
Road is not flat like-hill when you are
when the display is cold, the video is the tail
You can pull, and less likely to be recognized darker than usual
There are times when it becomes. The periphery of the safe to direct always
Please driving while checking in the eye.
Page 174
174
CRA4803-A <174>
The video of the back monitor
It mirrors the rear of the video
One
The shift lever I to R (reverse)
The rear of the video is reflected on the monitor screen automatically.
When the shift lever other than R (reverse)
It will return to the normal screen.
When the back monitor image, in the lower right corner of the screen guide
Page 175
175
CRA4803-A <175>
Use the camera function
For see how the screen
Only display line way
When the shift lever to R (reverse), the monitor screen is switched to the image of the
back monitor,
Back guide line to compensate for the vehicle width and distance sensation appears.
vehicle width extension line
It shows the measure of the course when it was straight back the car.
It can display actual wider than the vehicle width.
distance guide lines
It will show the distance of the car backward (from bumper rear end).
It does not work with handle operation.
In each of the center position, about 0.5 m away (the first run), about 1 m away (two
eyes), about 2 m away (3 rd)
I shows.
PLEASE NOTE
Car width extension lines appear wider than the actual car width. When you retreat,
safety directly always behind and around
Please driving while checking.
Memo
By the situation of the car and the road surface, reflected range may be different.
Range reflected in the camera there is a limit, those at the bottom of the near both
ends and bumper of the bumper is not reflected.
The rear of the image might be different from the actual color.
You can adjust the depth, contrast, brightness of the hue and black depth and color of
the screen.
"image quality
To adjust the "(P25)
It may back guide line is displayed shifted to the left and right by the vehicle, but it is
not a malfunction.
176
CRA4803-A <176>
Distance guide lines
Since the distance guide lines that are displayed to the road surface, not be able to
determine the distance between the three-dimensional object.
On the screen, it looks like tracks are parked about 1 m away by the distance reference
line (the position of the B)
The painting you, but in fact when you retreat to the position of A, you can hit.
The screen looks close to A, B, in the order of C, but the actual distance A and C at the
same distance, B is A, C
It is located in the farther distance.
Memo
When the following circumstances, the screen may be difficult to see, but it is not a
malfunction.
Dark -. (Such as at night)
Lens temperature is high in the vicinity, or when it is low.
And when with a drop of water to the camera, when humidity is high. (Rainy weather,
etc.)
When a foreign object (such as mud) is attached to the vicinity of the camera.
When the light of the sun and head lamp hits the lens of the camera directly.
When the high brightness point (such as the sun reflected on the vehicle body) is
reflected in the camera, the CCD camera-specific smear phenomenon
*
There departure
You may want to live.
* Sumiya phenomenon: high brightness point (such as the sun reflected on the vehicle
body)
That point up and down (vertical direction when but reflected on the camera
Phenomenon to pull the tail in direction).
177
CRA4803-A <177>
Use the camera function
When a steep downhill is in the rear
When the downhill is in the rear, you will see the actual distance guide lines in the
back than the distance. Downhill
If there is an obstacle to, it looks like there is in fact than in the vicinity.
Error will also occur in the actual path on the road surface as well as guide lines.
<Car condition>
1.0m
0.5m
<Screen>
Error
Error
1.0m
0.5m
Use the back monitor
Page 178
178
CRA4803-A <178>
Use a mobile phone
When this unit and the mobile phone Bluetooth connection, you can use the telephone
functions of this machine.
Make a hands-free phone call
A mobile phone when Bluetooth connected to this unit,
You can make a hands-free call.
Memo
As easy listening voice of the other party is, reception
Please adjust the volume.
( P111)
The following cases, this is voice to the communication partner side
There is that it becomes difficult to hear.
When running on a rough road
During high-speed driving
When you have opened the window
Aim the air conditioning vent towards the microphone
When was
When the large air-conditioner fan of sound
When you close the mobile phone to the microphone
To mobile phones and network of influence to be used
Ri, the sound quality is worse (noise, echo, etc.) that
I have.
For safety operation, it calls while driving as much as possible
Please avoid. The forced call while driving
through to make sure the safety of the well around if you want to
Please do exit briefly talk.
( "of navigation
I set the volume. "
(P111))
Speak with one keep breathing in each other
A guide audio output of the passenger side of the speaker
Set to learn
( "a guide / Phone Speaker setting
and "(P111))
However, the navigation inside the body of the echo canceller
On the mechanism of, completely eliminating the echo
You ca n't. Also, call the other party loud voice
In addition it will difficult to hear and speak with.
Memo
Also adjust the earpiece volume in the call in the menu
You can.
( P181)
Depending on the mobile phone, the place where some functions are limited
There is a case. For more information, contact your dealer
Please let.
Page 179
179
Use a mobile phone
CRA4803-A <179>
Other operations
Memo
The sound of "To~ururururu" The phone will incoming
Once sounding, to indicate an incoming call.
In the part of the mobile phone, the ring tone from the speakers
There may not be output.
To match the phone number that has been registered in the registration area
And, the name of that point will be displayed.
Memory dial
( P182)
Registered
If there is a match with the telephone number, registered in the memory dial
Has been name appears (registered land and Memorida
If the phone number of the dial is the same, of the registered location
The name will be displayed).
By usage of Caller ID service
The telephone number and name of the person who has missing display
It will not be.
Also answer the call by pressing the mobile phone button
You can.
Even in response hold the mobile phone side,
Touch to
You can cancel the response hold by.
Phone cut single-edged,
"Operation of the call in the menu" (
P181)
Please visit.
Two
Touch on how to make a phone call
Dial
A phone call by entering the phone number
Over you.
( P180)
Memory dial Mobilephones,cellularitisloadedintothemachine
The memory dial list of story
The call to make the call.
( P180)
Call History
When you connect the unit and the mobile phone
Outgoing, incoming (including missed calls)
To display the history that was, the phone
You can apply.
(
P180)
Redial
Li to the telephone number that was applied just before
Dial.
( P181)
Bluetooth set tolinethesettingsofBluetoothdevices
There you.
( P106)
Memo
Loading the memory dial of a mobile phone to the unit
If not out, the memorydial can be selected
No.
During transmission, during a call, mark of the phone in the upper left of the screen
Or call in the menu
( P181)
There is displayed
You.
Page 180
180
Use a mobile phone
CRA4803-A <180>
Make a phone call by entering the phone number
One
Dialing touchthe
( P179)
Two
Enter the phone number, outgoing standing in
Chisuru
One
Memory dial touchthe
( P179)
Two
Touch to choose a destination
Three
Phone number that is included in the chosen destination
181
Use a mobile phone
CRA4803-A <181>
Other operations
Make a phone call in the redial
One
Redial ittouchesthe
( P179)
Two
Outgoing touchthe
Page 182
182
Use a mobile phone
CRA4803-A <182>
Edit a mobile phone information
Reading of the memory dial and erasing, each history
Memo
Procedure
One
~
Two
In, settingandediting - Telephoneandcommunication
- mobilephonedataediting to be operated by touching the
Method is also available.
One
Memory dial touchthe
( P182)
Two
Read Iwanttotouchon
Memo
If you already have a data read, andoverwrite
Zan read or add read Iwillchoosethe
Sai.
Page 183
183
Use a mobile phone
CRA4803-A <183>
Other operations
Three
It operates the mobile phone, Memorida
It will transfer the dial
One
Memory dial touchthe
( P182)
Two
Erasing Iwilltouchon
Three
Touch the phone number you want to erase
Page 184
184
Use a mobile phone
CRA4803-A <184>
Four
Erasing Iwilltouchon
One
Highlight the history items that you want to erase
Touch ( P182)
Two
Touch to erase you want history information
Three
Erasing Iwilltouchon
185
CRA4803-A <185>
Other operations
Use eco Manager
Acquisition, depending on the contribution of eco-driving confirmation of the (eco
prize) can be animal images and Ekoun
Rolling I will do history confirmation of evaluation. Also, fuel consumption setting
for performing an eco route display
Do you.
One
Press (menu), Ekoma
Neja touchthe
Two
Touch to select the item
Eco prize thumbnailimageofecoprize
It will display the surface.
( P186)
Fuel consumption set
General road, the fuel consumption of the high-speed road and its
Re you set respectively.
( P186)
Eco-driving evaluation
History
Latest eco luck and past 9 minutes
It will show the rolling evaluation history.
Memo
It is calculated from the speed and elapsed time. Sensor
Such as when in the initial learning, the vehicle speed is not calculated
There are times when it is not calculated correctly in the state.
"Navigation Works"
(P204)
Eco-driving evaluation by the traveling environment, such as steep road
Because there are times when it is low evaluation, rather than acknowledge
Please.
Point pressurized depending on the number of eco-driving evaluation
It is calculated, the acquisition level of eco prize is Kemah
Ri you. For more information
"About Eco Prize" (
P186)
Please visit.
( P70)
Sensor initial learning in
( P98)
Page 186
186
Use eco Manager
CRA4803-A <186>
Eco prize
The poi cumulative results of eco-driving evaluation until the day before
The cement was converted, the level of the field that corresponds to the point
It will display the image.
Eco prize thumbnail screen
Thumbnail
Image
detail image of the selected thumbnail image
It will display the surface.
( P186)
<< / >>
Eco prize thumbnail image
It will send to the previous page / next page.
Memo
Have points of eco-driving evaluation has reached the level
Image is not ?Appears in the display, touch eco
Prize detailed description message appear
Vinegar.
Depending on the image acquired in the eco prize, and Per
"User icon", "Beep" of Sonaraizu,
It can be set in the "induction icon". Personalized
For more information about the Izu,
"The personalization features
To use "
( P187)
Please visit.
Page 187
187
CRA4803-A <187>
Other operations
Use the personalization features
And personalization features, in the case where the unit to become used with more
than one person, such as among family members, and use
Person (owner, user) different settings by your favorite (map display and volume
settings
Etc.) and it is also possible to separately registered, by switching the user, the original
configuration
Vinegar.
( P188)
Settings
Erasure of history
You can erases all of the operation history.
User switching newregistrationandcutoftheuser
Instead, you can delete.
(
P191)
Memo
Operation history that is not registered in the favorites,
More than 30 reviews and will continue to be overwritten in the old order
You.
Favorites registration, you can register up to 30.
If you do erase history, all of it except for the favorite
Operation history is erased.
Page 188
188
CRA4803-A <188>
Setting the User
Settings and the navigation map display method for each user
Me you can, such as volume settings of Geshon.
One
Settings User Settings andtouch
and ( P187)
P189)
Beep change
You set the operation sound.
(
P189)
Input keyboard keyboardsetatthetimeofcharacterinput
It is a constant.
( P189)
Character expansion of map ON/OFFofcharacterexpansionofmap
I set.
( P189)
Map view
Set the display method of map
You.
( P190)
Logo
A logo to be displayed map
Set you.
( P190)
Induction icon
Induction icon to display map
You set the pattern.
( P191)
Setting initialization
Factory settings to initialize
It will return to the state at the time.
Two
When you are finished, end standing in
Chisuru
You want to set the user icon
User icon or 20 kind of icon
I can et al setting.
The factory is the "pattern 1".
One
Icon Iwanttotouchon
( P188)
Two
It will touch on your favorite icon
Memo
Icon acquired in eco prize (up to 12 species
You can also set Louis). Eco prize
189
CRA4803-A <189>
Other operations
Set the volume
Ringtone of navigation of the guide volume and phone
The adjustment of the amount and the receiver volume, the ON / OFF of the operation
sound
You can set.
One
Volume totouchthe(P188)
Two
Set each item
Memo
Setting operation of volume,
"I set the volume of the navigation
A constant "
( P111)
This is the same as for.
190
CRA4803-A <190>
Two
ON or OFF touchthe
Three
Back toTouch
You want to set the display method of map
You can set the display method of the map.
The factory is "normal view".
One
Map view Iwanttotouchon
( P188)
Two
Normal view or Sky
View Iwanttotouchon
Three
Back toTouch
You want to set the display of the logo
Child to display the logo of the facility on the map
You bet you can.
The factory is as follows.
Display: "ON"
Display Type: "0 Type"
One
Logo Iwanttotouchon
( P188)
Two
Full list Iwanttotouchon
Memo
Here return to the map screen when you touch to the genre
Ri, all the facilities of the selected genre on the map
It will be displayed.
List customize according to your taste
You bet you can.
( P45)
Three
Ja you want to display the logo
Touch the Nru
Four
Facility you want to display the logo
It will touch on
191
CRA4803-A <191>
Other operations
Memo
When you touch the facility again, the indicator consumption
The lights will be deselected.
To select the other genres of facilities, toreturn Touch the
Procedure
Three
Returning to the screen, the procedure
Three
~
Four
Repeatedly to
Give me.
The display setting display:OFF in the case of, thedisplay:OFF Display: ON bytouch,changethedisplaysettings
Give me.
Four
Back Back Back Touchto
Make
Memo
Logo display setting operation,
"Logo
You want to display settings "
( P44)
This is the same as for.
One
User switching touchthe
( P187)
Two
New registration Iwilltouchon
192
CRA4803-A <192>
Switch the user
Settings for each registered user value and operation footwear
To use the gravel, you can switch the user.
One
User switching touchthe
( P187)
Two
Touch to users who want to switch
Make
Page 193
193
CRA4803-A <193>
Other operations
Use a smartphone cooperation function
Using the smartphone, the operation of the map (change of scroll or scale) and
destination
Setting, you can make the operation of the audio.
Memo
In order to use this function, the smart a dedicated application (NaviCon or smart
nAVVi Link)
You will need to download the Tofon. For information on setting up and usage of
smartphones, and App
Please refer to the help of Store or Google Play.
After preparation of the smartphone side is well-equipped, set to use the smartphone
cooperation function with this unit and the Bluetooth connection
Please be a constant.
"do Bluetooth Settings"
(P106)
When the setting is complete, the smartphone cooperation mark is displayed at the
bottom of the screen.
: Registration and set to the unit of the smartphone has been completed.
: Smart phone is connected. (Android smartphone will not be displayed)
: Connect the smartphone is complete, it is cooperation with the machine.
It does not allow operation of this function from the smartphone in hands-free
connection while driving.
For the connection corresponding smartphone, please contact your dealer.
Depending on the version up of a dedicated application, you may actual function is
manual and different.
Note
Please use always fixed smartphone. Rolling during traveling, and enters the bottom
of the brake pedal
And it is very dangerous.
The place to be in the way of to become the location and visibility interfere with the
operation when the safety device of the car, such as an air bag worked
Please do not fixed.
Please do not leave the passenger compartment smartphone. (Such as the scorching
sun, there are times when the passenger compartment becomes a high temperature.)
Please do not use as close to the machine the smartphone. If it is too close, connection
state child worsening
There is a door.
One
By operating the smartphone
Start NaviCon app, ground
You want to display a figure screen
Two
194
CRA4803-A <194>
Memo
In the search result screen of this machine guidancestart without touching the
To, when newly send the destination, it is displayed
That search results are canceled, new route
It is searched.
If you set multiple destinations in NaviCon, this unit
In point 1 is the destination, point 2 or later and place stop-off
And then it will be set. Ascending from the stop-off place point 2
It is set as close stop-off place in the destination.
One
By operating the smartphone
the smart nAVVi Link app
Start
195
CRA4803-A <195>
Other operations
Make the audio operation
One
the smart nAVVi Link app
The operation to audio cooperation mode
I go to
Two
Li smart nAVVi Link app
In remote control screen, the audio operation
Make
I play.
Track
Track / file and preThe Dow set channel
You down.
When you long touch, and rewind
I play.
+ Volume
Volume will increase.
- Volume
Volume will decrease.
Memo
When the AV source touches to OFF at MODE,
It becomes AV source prior to the AV source to OFF
You.
AV source is long touch to ON at MODE
And, AV source is turned OFF.
196
CRA4803-A <196>
Adjust the touch position of the touch panel
For example, when you feel a shift in the touch position that actually react with the
touch key on the screen to adjust to
Rukoto I can. (Touch panel calibration)
And 4-point adjustment to be performed on the screen four corners in the adjustment,
there is a 16-point adjustment to be performed in detail in the whole screen.
Please touch lightly on the screen using the ones that are not always pointed tip of a
cotton swab.
Memo
When ending the touch panel adjustment midway, long press (menu) or (current
location) or (O
Please press the audio).
If you press, to return to the screen of the navigation,
If you press,
It will return to the AV screen.
One
(Menu) press for more than 2 seconds
Adjustment results are saved.
Five
Press again (menu)
Seven
(Menu) press for more than 2 seconds
Exit adjustment and displayed before performing the image quality adjustment
It is to return to the screen had.
Memo
If the touch panel adjustment can not be performed properly
, Please consult your dealer.
Page 197
197
CRA4803-A <197>
With
Recording
Handling Precautions
Correct how to use the LCD screen
Handling Precautions
If you put a commercially available liquid crystal protection film, touch
It may be detrimental to the operation of the panel
You.
LCD screen should use it within a specified temperature range
There.
( P222)
Be used for a long time in a state in which the direct sunlight
Once, a fear that it becomes high temperature, the LCD screen fails
I have. direct sunlight as much as possible
Please do not.
LCD screen, in order to improve visibility in the car
It has become exposed. The failure to fear
Since there will, without pressing strongly LCD screen
Give me.
Since it becomes a cause of scratches and dirt, liquid crystal image
When you touch the surface, and make sure that you touch with your fingertips
Sai.
About the LCD screen
The shiny little black dots or bright in the LCD screen
You may leave a point (bright point). Is this,
This is not a malfunction on the LCD screen of the peculiar phenomenon.
If the direct sunlight on the LCD screen, the light reflection
It is because it becomes difficult to see the screen, direct sunlight
Please block the.
If the ambient temperature becomes your in a low situation
The characteristics on the afterimage of a liquid crystal is easily noticeable
There is the image quality is degraded. Ambient temperature
If the Takamare to return to normal image quality.
Page 198
198
CRA4803-A <198>
Use a disk that can be printed on the label surface
to time, instructions and notes of disk
Please check. Depending on the disc,
There are things that can not be inserted or taken out
You. The use of such disks,
It may cause a malfunction of your camcorder.
The disk, One stuck a commercially available label
Please do not only. Warpage occurs in the disk
Te, it can cause you can not be reproduced. Or
It was, when the label is peeled off during playback, disc
Clause no longer be taken out, the cause of the failure of this unit
It will be.
Memo
Although we are conscious on the product design, and walk on the mechanism
Due to the handling of the usage environment disk,
Scratch degree no practical use hindrance to the disk surface
You may have to stick. In this, the product failure
It is not. The faster your understanding as a general exhaustion
Please.
The kinds of disc that can be played or file format
Etc. For
The "Types of Playable disc" (
P200)
Please visit.
Cleaning
When the disc is dirty, soft and beautiful
In such a cloth, and from the inside of the disc to the outside
Please wipe lightly Te.
To disk, volatile such as benzene or thinner
Please do not put the departure of the chemicals. In addition,
The disk, for analog phonograph record
Cleaner, do not use such as antistatic agent
Please Do not.
Precautions storage
Disk, hit the place and high of direct sunlight
Where you become hot, please do not keep.
So the disk is not empty, always the case
Please keep it put.
Handling Precautions
Page 199
199
CRA4803-A <199>
With
Recording
Notices radio waves
This unit is small power data communication is based on the Radio Law Shea
As stem radio station equipment, technical standards Conformity Certificate
We have received a light. Therefore, using this machine
A radio station license is not required when you want to
It does. Also this machine can be used only in Japan
You.
That you do the following matters to be punished by law
I have.
The decomposition / remodeling that.
And peel off the certification label that is attached to the machine
Thing.
Wireless functions of this machine, the frequency band of 2.4 GHz
I hate the radio waves. This frequency band
Of radio waves various equipment (microwave oven, no
Line LAN equipment, etc.) is No uses
In, due to the interference of radio waves, the wireless functions of this machine
Child it becomes difficult to voice it is heard or interrupted
There is a door. In addition, the Ya operation of other equipment
It can affect performance. This
In the machine less susceptible to interference method
But, please note the following contents.
AV equipment and security utilizing a wireless LAN
In an environment that is using such equipment, the unit
If you use the wireless feature, choppy voice,
A significant impact on the operation of the wireless LAN equipment
It may give.
Other, also in the following equipment, 2.4 GHz of the frequency
There are those that use radio waves in several zones or
Vinegar. In the vicinity of these devices, voice abrasive
It can be, it may become unusable. Or
It was, to affect the operation of the other device
I have.
Fire alarms, wireless AV equipment (hand
*
*
*
*
*
*
Automatic control equipment and other, Bluetooth
Versus
instruments and VICS (road transportation network system)
Amateur radio stations, etc.
200
CRA4803-A <200>
About disk
Sai. )
Page 201
201
CRA4803-A <201>
With
Recording
For WMA / MP3 / AAC / WAV file
Folders and WMA / MP3 /
About AAC / WAV file
Disc that was recorded the WMA / MP3 files
Click or, WMA / MP3 / AAC / WAV file
The WMA?
The WMA, "Windows Media Audio"
It stands for, in the United States Microsoft Corporation
Therefore it is an audio compression method has been developed.
WMA data, Windows Media Player
It is encoded using the Ver.7 later
I can.
Memo
Application that was encoded WMA files
Some tion, it is not working properly and Kotogaa
Ri you.
Application that was encoded WMA files
Some tion, and character information, such as the album name
There is that will not be displayed correctly.
Page 202
202
For WMA / MP3 / AAC / WAV file
CRA4803-A <202>
To WMA files that can be played
About
Memo
When you name the WMA files, and files
Please with the extension (.wma) after the filename.
File this unit, the extension (.wma) are attached
It will play as a WMA file. Noise Ya
It will be the cause of failure, WMA files or more
Please do not put the extension (.wma) to the outside.
In this machine, Windows Media Player Ver7 /
WMA files that were encoded using the 8/9
You can play the.
Play the WMA file that contains the image data
If, it can take a long time before playback begins
There.
And MP3?
MP3 and is, of "MPEG Audio Layer 3"
It stands, standard Four on voice compression technology
Matt.
in can be played MP3 file
About
Memo
ITunes of you encode MP3 files
Depending on the version, the characters, such as file name
There is that information is not displayed correctly.
When naming an MP3 file, and file
Please with the extension (.mp3) after the name.
File this machine, that with the extension (.mp3)
It will play as MP3 files. Noise and late
It can cause disability, other than the MP3 file
Please do not put the extension (.mp3) to.
Page 203
203
For WMA / MP3 / AAC / WAV file
CRA4803-A <203>
With
Recording
The AAC?
The AAC, and "Advanced Audio Coding"
Stands, sound is used in MPEG2, MPEG4 in
This is the standard format for voice compression technology.
To AAC files that can be played
About
Memo
ITunes of you writing the AAC file
Depending on the version, the characters, such as file name
There is that information is not displayed correctly.
When you name the AAC files, and file
Please with the extension (.m4a) after the name.
This machine, the extension that has been created in iTunes (.m4a)
as AAC files a file that is attached
Play. The No cause noise or failure
In, other than AAC file extension (.m4a)
Please do not put.
A place to play the AAC file containing the image data
If, it takes time before playback begins Kotogaa
Ri you.
And WAV?
The WAV,
It stands for "Waveform", Windows
Page 204
204
CRA4803-A <204>
how the current position is found
In this machine, the better to positioning the current position (vehicle position)
In addition to GPS, modulo, and measurement by autonomous navigation
Much is possible.
The positioning by GPS
Electricity for position measurement from the GPS satellite (satellite)
System that receives the wave, and measures the current location
There GPS (Global Positioning System:
It is a global positioning system).
GPS satellites around the earth advanced 21 000
It has been launched in km. Three or more
Upon receiving a radio wave of the GPS satellite, positioning is possible
It will be. The positioning by the GPS, three-dimensional
There are two types of positioning and two-dimensional positioning.
Type
Content
And receive the radio waves of three-dimensional positioning GPS satellite in good
condition
When you can trust is, latitude, longitude, and
It can positioning with a high degree of three-dimensional.
To be able to receive radio waves of two-dimensional positioning a GPS satellite
Also, is not very good reception state
The time, measured in a two-dimensional latitude and longitude
Place to. Altitude it was not able positioning
Eyes, and positioning than in the three-dimensional positioning
Error of is slightly larger.
The positioning by autonomous navigation
Built-in 3D hybrid sensors, ran
The distance from the car of the vehicle speed pulse, crooked and who
In the counter-vibration gyro sensor, the slope of the road surface
In an inclinometer (G sensor) detects each
Te, it is indexing the current location.
Features of positioning that combines GPS and dead reckoning
And the current location of the data by GPS, dead reckoning
Always combining location data by
In order that, to perform more highly accurate positioning
Thing I can.
Electric wave of the GPS satellite can not be received
Also it is followed by positioning the autonomous navigation
You can.
Alone positioning by autonomous navigation, of You are here
the display may come shifted gradually or
Vinegar. The combination of GPS and dead reckoning,
Fix the deviation of the autonomous navigation by GPS positioning
Since it is possible to, the positioning accuracy is high
Will.
To enhance positioning accuracy
Mechanism
The role of 3D hybrid sensor
Built-in 3D hybrid sensors, self-reliance
In order to increase the positioning accuracy of the navigation itself, a high precision
It is utilized in degrees 3D hybrid system
There you.
High precision 3D hybrid system
When the vehicle speed pulse is input, the 3D
And Ken the altitude difference by hybrid sensor
The ability to leave, or enable highly precise positioning is
To (high-precision 3D hybrid system).
Navigation mechanisms
Page 205
205
CRA4803-A <205>
With
Recording
Map matching
Error is raw in the positioning by GPS and autonomous navigation
Because there is a thing Jill, it is here is in addition to the road
It may become. In such cases, "car
I believe that those running on the road ", the current location is near
A map-match function to modify to Kuno on the road
It is the ring.
If you map matching
In this machine, a high accuracy GPS and dead reckoning
About error
When the following situations, the error is it big
There is Rukoto.
The error caused by the GPS positioning disabled
When you are in the following locations, GPS satellite
Can not be received radio waves of the star is blocked
Therefore, it can not be positioning by GPS
I have.
Between the dense trees
Highway of two-layer structure
Under the
The Ya in the tunnel
Building parking
Crowd area of high-rise buildings
Navigation mechanisms
Page 206
206
CRA4803-A <206>
We ran the angle of the small Y-shaped intersection
Case.
The straight lines and gentle curve,
Shortly after that I ran long distance.
Gravel roads and snow-covered road, etc., Thailand
If ya have slip.
If you have a meandering operation.
Such as steep mountain road gradient, high and low
If you ran the road with a difference.
When fitted with a chain
And, in the tire of a different size
If you replaced.
In such as parking, turn
And carried out the turning of the table
Case was.
Hairpin curve was followed
Case.
If the road is close
(Such as a toll road and the side road).
Turning and cutting, etc. multistory parking garage
If you have repeated returns Ri.
It does not can positioning by GPS
If stomach state lasted long.
It passed through the loop, such as Bridge
Case.
For other error
Navigation mechanisms
Page 207
207
CRA4803-A <207>
With
Recording
Failure kana? If you think
Before requesting repair, please check the following content. The repaired even if the
check
If not, please consult your dealer.
Common items
Symptom
Cause
Treatment
"Cis that it detects a high or low temperature
It will pause the tem. Until the return
Please be patient. Message that "
Sage is displayed.
Air conditioning vents
Such that it has installed near
But because, navigation
The internal temperature of the body down high
Kumata was lower.
Until the temperature to operate normally
Please wait. The return to the normal temperature
And that, [whether high or low temperature state
Luo system is ready for operation
It has returned. ] And it will be displayed.
Message referred to as "running can not be operated."
Sage is displayed.
It can not be operated while driving
It was operated the function.
Some features, Misao while driving for safety
It does not allow you to work. Safety
Parking brake in stop at a place
Please operate it from over the trees.
Navigation
Symptom
Cause
Treatment
You can not positioning the vehicle position.
Positioning error is large.
And shielding the radio waves on top of the GPS antenna
We have things at that.
Do not put anything on top of the GPS antenna
Please Do not.
3D hybrid sensor is properly academic
Learning that are not.
Memo 3D hybrid sensor
Reset Lee
( P98)
And then learning
Please to try again.
Vehicle position is shifted.
Positioning error.
For prone location of positioning error,
"About error" and ( P205)
Please visit.
Memo 3D hybrid sensor
Reset Lee
( P98)
And then learning
Please to try again.
Hands-free calling time to,
Sound size in the call the other side
Ku hear.
Of the other party side voice (from the speakers
Voice) is enters into the microphone. Eh
Coe is the other party's voice the vehicle speakers
It caused to enter the microphone through
In I will occur.
Improved by decreasing the earpiece volume
It may be able to
( "Navigation
To set the volume of the tion "(P111))
.
However, on the mechanism of the machine, completely sound
Can be eliminated trees (echo)
To do. Also, call the other party loud voice
208
CRA4803-A <208>
Audio
Common items
Symptom
Cause
Treatment
No sound.
Volume is set to 0.
Please raise the volume.
It is muted.
Please cancel the mute.
No picture.
It does not apply a parking brake. The Kaketekuda the parking brake
Sai.
It has become the navigation standby state.
And be sure to release the Navi standby
There.
temporarily turn off the "screen (Nabisuta
-Standby) "
(P24)
The navigation on the monitor
Image of not displayed.
Monitor, the navigation screen
It is not switched.
(You are here) it is going to change the screen
Please.
Speed before or behind
No sound from the car.
It is appropriate adjustment of the front and rear volume balance
No.
Please properly adjusted and set.
"fader / balance setting"
(P145)
Left or right speaker
No sound from.
It is a proper regulation of the left and right volume balance
No.
I can not image quality adjustment.
It does not apply a parking brake. Please take the parking brake.
In the LCD screen, small
There are black spots and bright spots.
In the liquid crystal of the peculiar phenomenon, and there is a malfunction
To do.
Of display image is jagged
It is.
Wide screen phenomenon peculiar, in failure
No.
FM / AM
Symptom
Cause
Treatment
"Gee during radio reception
Gee, miscellaneous of heavy rainfall "
Sound often.
Radio broadcasting station is weak.
You should be try to tune the other broadcast stations
There.
"receive a radio broadcast"
(P124)
Such as there is an obstacle around, the reception state
It is not good.
When the reception state becomes good, noise is also small
Masu no longer.
It can not be automatic tuning.
There is no strong radio broadcast stations.
Manual Please be tuning in.
"Radio
You receive the broadcast. "
(P124)
Failure kana? If you think
Page 209
209
CRA4803-A <209>
With
Recording
CD / CD-R / RW (WMA / MP3)
Symptom
Cause
Treatment
Play the CD-R and CD-RW
Can not.
Disc is finalized
Not.
Please to finalize the disc.
The WMA / MP3 files again
I can not live.
And ".wma" to WMA files,
The expansion of the ".mp3" to MP3 files
Papier-mache is not attached.
Extension ".wma" to WMA files, MP3
Disk with the extension ".mp3" to the file
Please replace bother.
ISO9660 level 1, level
2, Romeo, in compliance with the Joliet
Not recorded.
Les Bell 1 of ISO9660, Les Bell 2,
Romeo, was recorded in accordance with Joliet
Please replace the disk.
Bit rate that does not correspond to
In are recorded.
It was recorded at a bit rate which corresponds to
Please be in WMA / MP3 files.
210
CRA4803-A <210>
TV
Symptom
Cause
Treatment
Screen is stopped.
Screen reflected and jittery,
It has dropped frames.
Square of the noise on the screen
It reflected.
such as when the reception state worsens,
It becomes such symptoms. These
Divided.
when the reception environment has changed, and Chan
Please refer to the channel scan.
"Registering automatically broadcast stations (channels
Rusukyan) "
(P131)
Reception level is lowered, broadcast reception
Can not.
Go to a stable location of the receiving state
Please viewing.
Message of "ANTENNA"
Sage is displayed.
There is a problem with the one-segment for the antenna. Please consult your dealer.
"Antenna connection error possible
There is a potential. Called "
Message is displayed.
"Channel is registered
It does not have. Message that "
Sage is displayed.
The tea in the preset channel list
Tunnel is not registered.
And be sure to channel scan
There.
"broadcasting station is registered automatically (tea
Down channel scan) "
(P131)
"Capable of receiving Sabisugaa
Must not. Message that "
Hemorrhoids are displayed.
Service is not registered.
"This channel is registered
You ca n't. Message that "
Sage is displayed.
It can be memory to user presets
If you try to register a no channel
It was.
Registration is looking for a channel that can be registered
Please be.
Failure kana? If you think
Page 211
211
CRA4803-A <211>
With
Recording
Symptom
Cause
Treatment
"Currently, this service
It can not be viewed. Called "
Message is displayed.
It exists as a broadcast (service)
But it is not broadcast.
"There is no video information."
Message is an indication that
It is.
It is a program of voice only.
"While driving voice only in the Contact
Please enjoy. Called "
Message is displayed.
I tried to watch TV while driving.
For safety, the child to see the video while driving
You can not. And stop in a safe place
Or over the parking brake by
Please Ragoran.
SD card
Symptom
Cause
Treatment
WMA / MP3 / AAC / WAV
You can not play the file.
".wma" To WMA files, MP3
".mp3" To the file, AAC files
".m4a" Le, the WAV file
It does not have the extension ".wav".
Extension ".wma" to WMA files,
Extension ".mp3" to MP3 files,
Extension ".m4a" to AAC files,
The extension ".wav" to the WAV file
Please put.
Sage is displayed.
SD card has not been fully inserted
No.
You should be in the SD card is fully inserted
There.
"out of the SD Card"
(P28)
Failure kana? If you think
Page 212
212
CRA4803-A <212>
ETC
Symptom
Cause
Treatment
That "it is inserted failure of the ETC card."
Message is displayed.
Insert failure of the ETC card.
Stop the vehicle at the toll booth
Place but that is guided (display)
There is a case.
To check the insertion state of ETC card
Up, please insert again.
Still error No. and message
If the message is displayed for purchasing
The consultation Kedah dealer of up have
Sai.
Not read out "of the ETC card data
No Could. Message is an indication that "
It is.
[When ETC card insertion]
The inserted ETC card
Read out soil data
No.
Please insert again. So
Error No. and messages
The purchase, if that someone is displayed
Please consult your dealer.
"Inserted card is in the ETC card
I could not be sure. The Make a card
213
CRA4803-A <213>
With
Recording
For reset
About body reset
When the following circumstances, it will continue to reset the machine
Please.
When correctly it does not work
When the screen is not displayed correctly
Memo
Even after the body reset, it has been registered in this machine
That content and settings do not disappear.
One
(Audio) and (menu)
Press at the same time for more than 2 seconds
One
Press (menu), information System information
- sensorlearning
Situation
It will touch on
Two
Sensor learning itwilltouchon
Three
All reset or distance learning
Reset ittouchesthe
Four
Yes Iwanttotouchon
214
CRA4803-A <214>
VICS information pay broadcasting service contract agreement
Chapter 1 General Provisions
(Application of the clause)
Article 1
General Foundation road traffic information communication system cell
Centers (below I referred to as "the Centre".)
The Broadcast Law (1950 Law No. 132) No.
In accordance with the provisions of Article 147, this VICS information Yes
Fee Broadcasting Service Agreement (hereinafter referred to as "this Agreement"
I called. Has established), thereby VICS information
It provides boric pay broadcasting service.
(Change of Terms and Conditions)
Article 2
The Center, subject to change this agreement
Ri you. In this case, the supply condition of the service
Is, VICS information pay-TV service contracts after the change
We are more in agreement about.
(Definition of terms)
Article 3
In this Agreement, each of the following terms next
It uses in the sense of.
(1) VICS Service
This center has a subscriber in using the car
In the eyes, and it is transmitted from the FM multiplex broadcasting stations, and
road
215
CRA4803-A <215>
With
Recording
Chapter 4 Rates
(Payment obligations of the fee)
It is a thing.
2 VICS service, multi-radio wave of FM broadcasting
Since by weight are provided, the broadcasting
If the change of the transmission system or the like is performed,
by the receiver the subscriber has purchased the original
The or you can no longer use the VICS service
Vinegar. The Center, is unavoidable circumstances
If it finds that that there is a period of more than three years
With a, of VICS service "Notice"
The screen or the like, after the well-known to the subscriber and the
It is subject to change in the transmission method of broadcast
You.
Appendix viewing fee
Viewing fee: 300 yen (excluding tax)
However, it is included in the vehicle unit purchase price.
VICS information pay broadcasting service contract agreement
Page 216
216
CRA4803-A <216>
Other information
The database in search
About
And depending on the data that has become a base to look for location
Te point, to be displayed (position) the actual port
There are times when you are away with the points.
About town page data
Based on the position data of the NTT town page
It has established a, but the original data its
In some cases, what is wrong.
In addition, street address is a vast place and the original
We can not identify the appropriate facility from data
In places, it is a representative point of the specified district
It will be displayed.
The purpose of the location that does not appear in the correct position
When you set the route as the earth, and its
Away the last of the guide land from facilities
It may become.
For data related to natural objects
And not the search point representing the facility to play
And Tokoro itself, the natural objects such as mountains and rivers
Notes on route
When the route search, automatically route / voice
Guidance will be set. Day of the week, with the time regulations
Te are those of the route searched time is reflected
You. For example, the time in the road of the "morning-way possible"
The lapse between, and running the site to "noon"
Exchange and such a result not pass the set route
There are times when it is contrary to the through regulation.
And in accordance with the always actual traffic signs when driving
Give me.
In addition, the support part in such as winter closed to traffic
Page 217
217
CRA4803-A <217>
With
Recording
How to route search
Traveling direction and opposite route currently set
It may be constant.
The route guiding the opposite side of the river and station
It may become. When such
It is close to the road that you want to use the destination
Please try to move.
Congestion consideration route, toll road avoidance, Fe
In such as Lee route avoidance, other appropriate Lou
It is not be avoided if there is no To Kotogaa
Ri you.
place it recommended route is less than six
If, that what this one is the same root
There.
That you can not route search by location
There is a door. In such cases, the eye
"Large intersection near the target point and the departure point
Point go try to set a stop-off place in the vicinity. "
Please.
The"bigintersection",narrowstreets(100m
Gray display narrow road on a scale
( "Ki
No. Mark List "(P235))
What road other than
This is the tooth of the intersection.
For road-painted route
Depending on the road shape, and from down the road painted
There are cases where the road appear to protrude
You.
Departure, destination, in the front and back of the stop-off place and Michinuri
You may or may not Risa. For this reason,
As root in the vicinity of the place stop-off is interrupted
It may appear.
About voice guidance
In the case of auto re-route, to the original route
The guide point to return will not be guided.
However, that point is guided by such turn right
Other information
Page 218
218
CRA4803-A <218>
Notes on VICS information
About FM multiplex broadcasting
Using the FM multiplex broadcasting from the VICS Center
VICS information that you use is, NHK-FM of FM multiIt is provided by the radio waves of heavy broadcast.
Because the information is updated in a constant cycle, information
It takes time to broadcast gather.
Broadcast time may vary depending on the broadcasting station or
Vinegar. It was confirmed by such VICS Center information
Please be.
Contact the VICS Center
VICS of concept, planning, or FM multiplex broadcasting
Matters relating to the VICS information to be provided more
Can contact the (goods) VICS Center
Give me.
Telephone Hours: 9:30 to 17:45
(Saturdays, Sundays and public holidays, year
End New Year of Center holiday
I except)
Phone number: 0570-00-8831
(And from the whole country in the Navi
I in available at local call rate
Will)
FAX reception time: 24 hours
219
CRA4803-A <219>
With
Recording
From Hanshin Expressway Co., Ltd.
Contacting
Undeveloped District network to Hanshin Expressway
In order to interpolate between, it receives the transit ticket, one
Again in the transit ticket after it has passed through the road,
Take the Hanshin Expressway without paying the toll
Can there is a "transit zone". (Riding
ETC is available in the following section. ) In addition, the "power
Ri For details of the next section ", the following
Please visit.
No. 3 Kobe line (Kyobashi Maya doorway) 5 Pat Bay
Shore line (Sumiyoshihama doorway)
No. 4 Wangan (Ohama doorway) No. 15 Sakai-sen (Sakai
Doorway)
No. 3 Kobe line (Nakanoshima west exit) 1 No. loop line
(Dojima entrance)
No. 16 Osaka Port line (Namiyoke exit) 1 No. loop line
(Dojima entrance)
About recording database
For map data
It supports the Japan geodetic system.
And no to the copyright holders in any form
The reproduction of all or part of the map by the cross-sectional
It is, is strictly prohibited to take advantage.
In preparing this map, general goods
Dan Japan digital road map Association departure
Nationwide digital road map database of line
We've used vinegar. (Surveying Law Article 44
Achievements use approval is based on the 90-063) "
Other information
Page 220
220
CRA4803-A <220>
About VICS service area
VICS area that is included in this product
Following prefectures will be subject to.
Hokkaido (Kitami) (Asahikawa) (Sapporo) (Kushiro) (box making
Cans), Aomori, Akita, Iwate, Yamagata Prefecture,
Miyagi, Fukushima, Tochigi, Gunma, Ibaraki Prefecture,
Chiba, Saitama, Tokyo, Kanagawa, Yamanashi
Prefecture, Niigata Prefecture, Nagano Prefecture, Shizuoka Prefecture, Aichi
Prefecture, three
Heavy Prefecture, Gifu Prefecture, Ishikawa, Fukui Prefecture, Toyama Prefecture,
Shiga Prefecture, Kyoto, Osaka, Hyogo, Okayama Prefecture,
Nara prefecture, Wakayama prefecture, Tottori, Shimane Prefecture, Hiroshima
Prefecture, Yamaguchi Prefecture, Tokushima, Kagawa, Ehime Prefecture, high
Kochi Prefecture, Fukuoka, Saga, Nagasaki, Kumamoto Prefecture,
Oita Prefecture, Miyazaki Prefecture, Kagoshima Prefecture, Okinawa Prefecture
Even VICS service area is enlarged,
Service that has been newly expanded with this product
Level in the area 3 (map display type) display
You can not.
For data of the broadcast station list
VICS, AM, FM, digital terrestrial TV
Broadcasting station name list during the investigation in May 2013
It is a thing of the point.
Other information sources
Other information
Page 221
221
CRA4803-A <221>
With
Recording
For after-sales service
Warranty
1. Warranty
Toyota dealer, or to Toyota vehicles Toyota specified service factory and your
attachment to Toyota Jun
Materials positively goods, or if the manufacturing defects occur, in accordance with
terms and conditions shown below
This will be a free repair.
(Below, called the warranty repair this free of charge repair.)
Warranty repair is done by the exchange or repair of parts. Also, remove the bug parts
DOO
It will become the property of Toyota.
2. Period of guarantee, How to Get
warranty period
Period to obtain warranty repair, the date of your mounting products to Toyota
vehicles from your start date
Suppose you have it counted three or annual Te. However, mileage even within that
period is up to 60 000km
To you.
of warranty repair to Get
Toyota dealer when it comes to accept a warranty repair, or to Toyota specified service
factory own
I have in the state attached to the motion vehicles, please tell us the warranty repair.
3. Guaranteed matters not
Even within the warranty period, the problems caused by the following does not
guarantee repair.
mounting of Toyota's dealers, or other than Toyota specified service factory, repair
and Toyota
such as remodeling other is not allowed.
handling practices and different use and improper storage, and the like, and
earthquake shown in handling documents, typhoon, water
Natural disasters and accidents, fires, such as harm.
Cost of the following things is not our burden.
such as consumable parts and oils and fats. (Fuse, and various light bulb.)
And such inconvenience and loss caused by the fact that it was not able to use
commodity.
4. The application of the guarantee
It will apply only if it is used in Japan.
5. Other
Reseller for purchasing If you are unsure about repairs after the warranty period,
please contact
Please.
Minimum holding period of repair performance parts
The (parts required for functional maintenance) for repair performance parts of the
product, after production discontinuation least 6 years
It owns.
For such as after-sales service, when it is not in you can see is,
Please contact your dealer.
Page 222
222
CRA4803-A <222>
Specification
common unit
Use voltage ................................................ ..13.2 V DC
(10.5 V ~ 16.0 V available)
Maximum current consumption ............................................... ...... 15 A
223
CRA4803-A <223>
With
Recording
Trademark, copyright, etc.
This product, based on the Telecommunications Business Law and the Radio Law
We're getting a design certification that brute.
D11-0044001
007WWDUL0613
Microsoft, Windows, Windows Vista, your
And Internet Explorer, the United States Microsoft
Of the Corporation, the United States, Japan and other
They are registered trademarks or trademarks in the country.
This product, the US Microsoft Corporation
We are using the technology to ownership. In addition, the United States
Used without permission of Microsoft Licensing Inc.
Use or can not be distributed.
The MP3 is an abbreviation of "MPEG Audio Layer 3",
This is the standard format for audio compression technology.
If you want to provide the machine, personal non-commercial purposes
Only license will be provided. Following broadcast *
In, we can provide a license to use this machine, squid
Whether it is format intended to mean the right use
It is not. Use this machine in the following broadcast *
If, each requires a unique license
Will. For more information, on the Internet Home
Page http://www.mp3licensing.com
Please visit.
*
Commercial purposes, that is real to the generation of profits
-Time broadcasting (terrestrial broadcasting, satellite broadcasting, cable TV
It is set to the beginning media), and using the Internet
Broadcasting and data transfer was, and O started the intranet
Network or Pay audio, Ya to
Electronic, such as audio on-demand system
Such as the broadcast program of the distribution system.
iTunes are registered in the US and other countries
It was a trademark of Apple Inc..
And "Made for iPhone", the iPhone only
It is designed to connect, sex Apple set
By developers and meets the performance criteria
It indicates that it is a certified Electronic Accessories
You. Apple, function and safety of this product
And negative the responsibility for compliance with the standard
No. Use this accessory with iPhone
By, it will affect the wireless performance
Please note that there is a possibility.
Generally Foundation road traffic
Information and Communication System Center
Of a trademark.
SDHC logo is a trademark of SD-3C, LLC.
Bluetooth
Word mark and logos,
is a trademark owned by Bluetooth SIG, Inc.,
Pioneer Corporation, to use these trademark
That we have received the permission. All other trade marks
And trade names are the property of their respective holders owned.
"ATOK" is a registered JustSystems Co., Ltd.
It is a trademark.
"Map code" and "MAPCODE", the stock
Page 224
224
CRA4803-A <224>
Note 1: all described in the "final customers license the terms of the above-mentioned
For details on the contents of the tree matters ", Article 5 second
In this Appendix, in the case of 3 and fourth terms as "Attachment
With soft copy of "the phrase is" this matter equipment
To use Embedded for runtime ", and Article 6 second
In this Annex in the case of the term is "bundled software replication
Things "the phrase is" binding accompanying software "
You shall be deemed to be replaced respectively.
Note 2: Article 6 Paragraph 1, Item 3 or same Article 2 Section
The bundled software improved version based on the provisions of No. 2
Follow the final customers license terms according to the present Exhibit
If stomach instep to create, in this Exhibit "attached Seo
Shift copies of "the phrase is" bundled software breaks
It shall be deemed to be replaced with good version ".
Here, the software that is used in this product
We have been described for the use license of the (license)
You. To hold the exact content, textual (English)
I will not describe.
bsdiff
Copyright 2003-2005 Colin Percival
All rights reserved
Redistribution and use in source and binary
libjpeg
This software is based in part on the work of
the Independent JPEG Group
FreeType
Portions of the software in this product are
copyright 1996 - 2009 The FreeType Project
(Www.freetype.org). All rights reserved.
Licensed under the FreeType Project LICENSE,
2006-Jan-27. (Http://www.freetype.org/FTL.TXT)
225
CRA4803-A <225>
With
Recording
Index
Menu Index
Information Menu
(Menu)
Information
Destination
Name P55
Address P56
Genre P57
Surrounding facilities P57
Telephone number P59
Registration area P59
Search history P60
Home P54
Map code P60
Setting and editing menu
(Menu)
Navigation
TV setting P132
Movie screen clock display P123
Telephone and communications
226
CRA4803-A <226>
Mobile phone menu
(Menu)
Cellular phone
Dial P180
Memory dial P182
Call History P180
Redial P181
Bluetooth Settings P106
Edit and erase P182
Eco Manager menu
(Menu)
Eco Manager
Route editing
Index
Page 227
227
CRA4803-A <227>
With
Recording
Concordance
Syllabary order
Oh
Feed Na was revealed
26
Brightness
Twenty five
After-sales service
221
Arrow Guide
71
Information volume
111
Information areas
71
Equalizer
146
Correction
147
Eject (disk)
27
Pause
133, 1 35, 137, 140
General road simple guide
104
Illustrations information (facility)
52
Irumine Sho down
Hundred
Tint
Twenty five
Color temperature
Twenty five
Color strength
Twenty five
Indicator
26
Indicator (security)
118
Interchange (IC)
50 , 64, 67
Intelligent reroute
76
Consideration Hours
58, 216
Video screen clock display
One two three
Eco-driving evaluation
185
Echo (reverberation)
178
Eco prize
186
Eco Manager menu
37, 185
Area preset
1 25, 129
Make the audio operation
195
Upper / lower case
31
AUDIO SETUP
145
Auto (VICS broadcast station selection)
93
Auto highway map
102
Auto highway mode
49
Auto broadcasting station search
132
Auto re-route
76
It sends sound
26
Music CD
133
Audio compression method
201
Audio assist
73, 157
Voice switching
131
Volume
16, 1 11, 170, 189
Or
Tachometer
98
External device
144
Learning route erase
87
Learning route search
69, 103
Angle adjustment
Twenty four
Image quality adjustment
Twenty five
Screen switching
(Navigation AV source scan )
Twenty three
Symbol
34
Regulatory display
105
Locus display
39
Function settings
101
Congestion information
105
Map display
102
Route guidance
103
Keyboard system (character input)
Thirty
Line feed
26
Distance
98
Search by Keyword
56
The received Nitsu of emergency warning broadcasting (EWS) have 123
Automatic display of emergency information
91
Depth of black
Twenty five
Inclinometer
98
Cellular phone
Receive
178
Play
179
Switching
108
Mobile phone information
182
Edit a mobile phone information
182
Mobile telephone system (character input)
Thirty
Mobile phone menu
37
Mobile phone brought forget guidance
110
Mobile phone brought to forget to set the guidance Teisu Ru 110
Use a mobile phone
178
You are here screen
21, 39
Display of current location information
102
Border guidance
48, 104
Search history
87
Look for from the search history
Sixty
Wide area
41
Sound effect
84
Intersection guidance display
71, 103
High precision 3D hybrid system -time
204
Traffic regulation information
89
Index
Page 228
228
CRA4803-A <228>
Traffic Fault information
89
Transportation information
89, 127
Candidate display screen
47
Go to here
63
I register here
81
Error
205
Contrast (light and dark)
Twenty five
Narrow street guidance
48, 73, 104
Playback
133, 135, 137, 140
Re-search (root)
78
Side map
46
Service area (SA)
50, 52
Service switching
130
Coordinate
46
Sampling frequency
202
Time regulations
69
Seek (VICS broadcast station selection)
93
City name
56
Vehicle position correction
115
Facility information
50, 51
Home
Return
54
Sign up
16, 54
City map
42, 102, 218
City map boundary display
102
Automatic registration (broadcaster)
1 26, 131
Subtitle switching
131
Vehicle speed pulse
98, 99
Vehicle information
17, 113
Vehicle Maintenance
96
Search by Category
57
Cross-hair cursor
38, 41
Look for in Address
56
Congestion auto guide
77, 91
Congestion and regulatory information
77, 91
Congestion consideration route search
69, 103
Congestion information
89 , 92, 93
Congestion information display
105
Congestion information display (highway Lee mode)
52
Congestion information display object road
105
Congestion check
77, 91
Look for the surrounding facilities
57
Parallel parking
1 57, 166
Recording database
219
Main voice
131
Reception status
93
Departure specified
68
Steady display
105
Specification
222
Mute timing
148
Mute level
148
Erasure
Learning route
87
Search history
87
Vehicular swept path
88
Registered location
84
Root
79, 80
Getting on and off IC specified
67
Details (scale of the map)
41
Detailed city map Shitima -up
42, 218
Details Routing
66
Information screen
47
Information Menu
35
The expendables
96
Initialization
119
Shortcut menu
38
Serial number
98
Autonomous navigation
204
Satellite
204
Traffic light
49
Signal Just Us
104
Direction guiding
73
Vibration gyro sensor
204
Simple guide
74
Sky View
42
Scan
19, 126
Scan automatic registration
131
Scroll confirmation screen
65
Scroll screen
41
Graphic information (VICS information)
92
Scale
41
Steering switch
Twenty one
Stereo broadcasting
1 24, 129
Use a smartphone cooperation function
193
Smart IC
Fifty
Smart IC consideration route search
69, 103
Slide operation
Twenty two
View the slide frame
119
Shift (vehicle position)
115
Security Features
116
Security Settings
16, 116
Connection Status
99
Setting initialization
119
Setting and editing menu
36
Index
Page 229
229
CRA4803-A <229>
With
Recording
Safety Information
48
Before and after G
98
Sensor learning
98, 213
Center information (VICS Center )
92
Traveling locus auto-erase
102
Traveling locus erase
88
Traveling locus display
102
Beep
1 11, 189
Operation touch key
128
Source level adjuster
147
It was
Dial Q2
59
Dial
180
Town page
216
Stop-off place
66
Postponement
79
Delete
67
Add to
66
Sorting
67
Touch key
Twenty two
Touch panel
Twenty two
Touch panel calibration down
196
The feed tab
26
Search conditions
64, 78
Speed dial
59
Check mark
26
Checklist
26
Map color switching
102
Look at the map
55
Or to a telephone number that has been registered in the map kicking 181
Channel scan
19, 131
Parking information
89
Parking mark display
105
Parking limited (models)
113
Parking limited (vehicle size)
114
Roadblock consideration auto re-route
76
During a call menu
181
Operation of a call in the menu
181
Data version
Hundred
Demonstration run
79
Power-supply voltage
Hundred
Radio launch
110
I ON / OFF the radio launch
110
Look for the phone number
59
Or a phone call by entering the phone number kicking
180
You receive a phone call
178
Make a phone call
179
Dial
180
Phone number that has been registered in the map
181
Memory dialing
180
Redial
181
Expected time of arrival
70
Estimated arrival time rate (general road)
103
Estimated arrival time speed (surcharge road)
103
Sign up
Home
16, 54
Scale
44
Location
81
Registered location
Erasure
84
Edit
83
Name display (private mapping) 84
Registration land transition
85
Look for from the registration area
59
Road traffic information communication system V IC S
89
Display clock (video screen)
One two three
Urban expressway
72
State Name
56
Track
133
Tripmeter
98
I
Navigation screen (map screen )
Twenty three
Navi standby
Twenty four
Navi menu
35
Input keyboard
189
Fuel consumption
17
Fuel consumption set
186
Normal view
42
The
Heart full voice
104
Highway mode
42, 46, 50
Parking area (PA)
50, 52
Parking brake
Hundred
Location
Look for
55
Sign up
81
Passkey
109
You want to change the passkey
109
Password
85, 117
Personalized
18, 187
Back guide monitor
149
Back signal
Hundred
Index
Page 230
230
CRA4803-A <230>
Back monitor
173
Transmission
180, 181
Caller identification service
179
Call History
180
A phone call from the call history I bet
180
Program content
131
Program guide
130
Hands-free calling
1 07, 178
Make a hands-free phone call
178
Band
125
Fine adjustment (scroll)
Forty
Bit rate
202
Display method
41, 190
Factory curve
146
Fader / Balance
145
Ferry route use conditions
103
Folder
13 6, 138, 201
Sub-audio
131
Physical channel
129
Railroad crossing guidance
48, 104
Private mapping
84
Preset
Area preset
1 25, 129
User presets
1 25, 129
Preset channel
124, 129
Branch (toll road)
72
Information of the branch destination
51
Branch facility
50, 51
Parallel parking
1 52, 155
The feed page
26
Induction icon
191
Toll road attention point-border guidance
48, 104
Toll road
49
Toll road use conditions
103
Toll classification
113
User icon
188
User switching
191
User setting
188
User presets
1 25, 129
Et al.
Light lighting guidance
48, 104
Loudness
146
Radio
124
Random play
134 , 136, 139, 142
Lamp
Fifty
List (VICS broadcast station selection)
93
List screen
25, 47
Reset (sensor learning)
98, 213
Redial
181
Make a phone call in the redial
181
Index
Page 231
231
CRA4803-A <231>
With
Recording
Grade separation
71
Repeat Play
134, 136, 138, 142
Refresh guidance
48, 104
Fee Station
50, 53
Tollgate ( inlet and outlet)
72
Fee indicator
51
Travel time information
89
History information
184
Erase the history information
184
Route guidance
70
Route guidance start screen
64
Route Information
70, 77
The re-search the route
78
Route re-search Otoriru To
76
Root erase
79, 80
Route search
63
Learning route search
69
Home
54
A
A2DP
140
AAC (Advanced Audio Coding)
203
ALL REPEAT
142
Apple Lossless
203
ATOK
Thirty
AUX
144
AVRCP
140
Interrupt to the AV screen
104
AV source icon
121
AV source screen (audio screen ) 2 3, 121
AV source plate
121
AV profile
140
B
Bluetooth Audio
140
Switch the Bluetooth equipment
108
Bluetooth Settings
17
Do Bluetooth settings
106
Bluetooth profiles
106
C
CD
1 33, 200
CD-EXTRA
200
CD-R / RW
135
Copy Control CD
200
D
DDCD
200
DISC REPEAT
134, 136
DRM (digital rights management)
135
E
ETC card expiration date
Hundred
Index
Page 232
232
CRA4803-A <232>
ETC card expiration notification
53
ETC information
94
ETC mounted state
Sixteen
ETC unit (ETC-board unit)
Hundred
ETC lane guide
53, 104
e start guidance
48, 104
F
FILE REPEAT
138
FLAT
146
FM-VICS
89
FM multiplex broadcasting
93, 218
FOLDER REPEAT
1 36, 138
G
GPS
204
GPS antenna
99
GROUP REPEAT
142
I
ID3 Tag
202
ISO9660
201
iTunes
203
J
Joliet
201
M
m3u
201
MP3
135, 202
MP3i (MP3 interactive)
201
MP3 PRO
201
MPEG2
203
MPEG4
203
MPEG Audio Layer 3
202
N
NATURAL
146
Use NaviCon app
193
NON STOP SEEK
124
P
POWERFUL
146
Q
QUICK SETUP
Fifteen
R
Romeo
201
S
SDHC
137
SD card
28, 137, 198
SEEK
124, 129
smart nAVVi Link app I use
194
SUPER BASS
146
T
TRACK REPEAT
13 4, 136, 142
V
VBR
202
VICS (Vehicle Information &
Communication System)
89
VICS information provision time
Ninety
Display of VICS information
89, 90, 92
VICS Center
218
VICS mark
91
VOCAL
146
W
WAV
203
Windows Media Audio
201
Windows Media Audio 9 Lossless 202
Windows Media Audio 9 Pro fess ional 202
Windows Media Audio 9 VOIC e
202
Windows Media Player
201
WMA
1 35, 201
Index
Page 233
CRA4803-A <233>
233
Memo
Page 234
CRA4803-A <234>
234
Page 235
235
Symbol marks List
symbols and marks, there are times when it is not displayed by the view and scale.
might be different from the actual color.
Congestion
Congestion
Favorable
Regulation section
Inlet closing-way stop
Speed limit
Wrong way
Closed to traffic, closed
Large closures
Face-to-face way
One side alternating traffic
Crawl
Lane regulation
Chain regulation
Freeze
Disabled car
Construction
Work
Accident
Obstacle-road failure
Entrance limit
Inlet closing
Parking (empty)
Parking (congestion)
Parking (full car)
Parking (closure)
Parking (Unknown)
Weather
Event
Disaster
Fire
Cause / events None
General way: white frame
Toll road: blue frame
Parking guidance point
Other guidance point of
Destination
Stop-off place
Point of departure
Information areas
Guidance in the root (surcharge road)
Guidance in the root (general road)
Guidance in the root (narrow streets)
Fast and pay road
National highway
Major local roads
Prefectural road
General road
Narrow streets
Railway
State border
National highway number
Prefectural road number
Toll road road number
One Way
Sea, rivers and lakes
Such as parks, green spaces, lawn
Facility site
Facility
Station building
Interchange / lamp name
Intersection name
Lamp entrance
Lamp exit
Traffic light
Designated point
Mountain
Park
Factory
Tunnel entrance
Mansion
Service area
Parking area
Interchange
Tollgate Smart IC gate
Parking Garage
Tennis court
Museums
Zoo
Botanical garden
Aquarium
Hall theater
Shrine
Temple
Church
Castle
Pasture
Racecourse
Department store
DIY shop
Hotels
Roadside station
Airport
Heliport
Ferry landing
Tourism pier
Tower
Lighthouse
Cemetery
Public facility
Police station
Fire station
Hospital
Post office
NTT
High school
Primary school
Junior high school
University
College
Automobile-related facilities
Hot Springs
Amusement parks and other
Equestrian club
Campsite
Bowling alley
Sports Facilities
Golf course
Other sports
Baseball field Stadium
Gymnasium
Ski resort
Bathing beach
Yacht harbor
Motor sports
Search and root-related
Map-related
Congestion information related
CRA4803-A <235>
Page 236
NSCP-W
<NVF-0028ZT>
<KFWZ13L> <CRA4803-A>
Distribution source
Navigation
&
Audio book
Navigation mounting record book
Mounting store name and mounting shop name
Mounting Date
Mounting when traveling kilometers
Remarks
(Such as repair note and guarantee inheritance information)
CRA4803-A <236>