MLG Piston P/N S6125-50105 SRI 018.2 - Chrome plating/corrosion repair
Vector Repairs Available:
Cam Arm Dropper Retainer P/N S6110-25081 ACRO RI 420002 - Shaft bore oversize Damper Oil Reservoir Tank P/N S6110-26340 ACRO RI 420011 - Worn fitting threads Upper Hub Plate P/N S6110-23001
ACRO RI 420012 - Worn threads for lower cone seat pressure plate SRI 010 - To establish main rotor hub 0.725 cone seat limit SRI 016.1 - Corrosion on hinge bore lug surfaces Bifilar Bushings P/N S6112-23044
VA-HSNA RI 420031.1 - No chamfer on bushing OD required for interference fit Bifilar Support P/N S6112-23040
SRI 030.6 - Corrosion in: (A) weight lug surface & bore (B) lift (sling) lug faces Swash plate P/N S6110-24012 SRI 017 - Corrosion on socket bore
*Includes wheels and brakes
S61/H3/CH124 Series - Main Landing Gear Assembly*
OVERHAUL / REPAIR / INSPECT / MODIFY / TEST OEM Repairs Available - I.A.W OEM Manuals Vector Repairs Available: Lower Drag Link P/N S6125-50126 ACRO RI 420007 - Elongated ground lock pin hole Upper Drag Link P/N S6125-50104 SRI 027 - Indentation caused by cam follower MLG Piston P/N S6125-50105 SRI 018.2 - Chrome plating/corrosion repair *Includes wheels and brakes
S61/H3/CH124 Series - Main Landing Compression Strut
Upper Housing P/N S6135-20011 HRP 102 - Dia [-A-] Beyond Limits Reference SA-4045-83, Pg. 457, 65-1300 HRP 112 - Corrosion on inner mounting surface beyond limits specified in Sikorsky Manual SA-4045-83, Chapter 65-13-00, Pg. 450 Lower Housing P/N S6135-20670 ACRO RI 420013 - Cracks below stud holes, upper flange aft end ACRO RI 420023 - Input & rear cover flange bolt holt corrosion AHGS RI 420034 - Spot face machined beyond maximum depth
AHGS RI 420035 - Damage on bearing support pilot diameter VA-HSNA 420049 - Bearing support pilot diameter liner repair Input Housing Cover P/N S6135-20600 ACRO RI 420015 - Worn bushing hole, anti-rotating pin, torque meter Input Housing & Cover P/N S6135-20606 HRP 113 - Misalignment or wear of (#3) & (#4 pinion bores) ACRO RI 420001 - No studs on actuator mounting pads
VA-HSNA RI 420029.1 - Damaged rosan lock ring seat in oil fitting bores AHGS RI 420030 - Stripped threads on pressure checking port, spur gear bearing, L/H & R/H, input cover
AHGS RI 420036 - Damaged threads for slimsert AHGS RI 420038 - Sleeve bearing bore magnesium liner repair breakthrough to oil temperature probe cavity AHGS RI 420039 - Freewheel bore beyond depth limit VA-HSNA RI 420041 - Damaged thread in lower housing mounting stud hole ACRO RI 426001 - Damaged male pilot diameter SRI 003 - Oil cross feed hole out of position SRI 004 - Depth of sleeve bearing bore out of tolerance SRI 008.1 - Corrosion on torque meter bores in input cover SRI 009.1 - Corrosion on oil fitting bores SRI 024 - Misalignment of input bore SRI 029.1 - Freewheel bores out of alignment
Tail Take-off Housing P/N S6135-20603 ACRO RI 420024 - Worn bearing liner bore Rear Cover P/N S6135-20017 AHGS RI 420032 - Over machining past surface B Rear Cover P/N S6135-20060 SRI 002 - Worn generator freewheel unit liner location Oil Pump Housing P/N S6135-20688 AHGS RI 420033 - Damaged dowel hole E1, B2 & C2, ref. figure 1 & 2 Intermediate Oil Pump Housing P/N S6135-20689 AHGS RI 420033 - Damaged dowel hole E1, B2 & C2, ref. figure 1 & 2 Input Cover P/N S6135-20638 AHGS RI 420030 - Stripped threads on pressure checking port, spur gear bearing, L/H & R/H, input cover AHGS RI 420037 - Stripped threads or corrosion Torque Meter Housing P/N S6135-20634 SRI 012.1 - Wear or surface cracks on torque meter hsg piston bore Bearing Support P/N S6135-20014 SRI 032 - Corrosion in upper & lower flanges
S61/H3/CH124 Series - Rotor Brake Assembly
Vector Repairs Available:
Brake Housing P/N 9440273, 9440273-1, 9440274, 9440274-1 VA-HSNA RI 420040 - Damaged or corroded bolt hole and piston cavity SRI 022 - Corrosion in bolt boxes
S61/H3/CH124 Series - Tail Rotor Blade
S61/H3/CH124 Series - Oil Cooler Blower Assembly
OEM Repairs Available
- I.A.W OEM Manuals
OEM Repairs Available
- I.A.W OEM Manuals
S61/H3/CH124 Series - Tail Gearbox Assembly
S61/H3/CH124 Series - Input Shaft Assembly
OVERHAUL / REPAIR / INSPECT / MODIFY / TEST
OVERHAUL / REPAIR / INSPECT / MODIFY / BALANCE
OEM Repairs Available
- I.A.W OEM Manuals
OEM Repairs Available
- I.A.W OEM Manuals
OVERHAUL / REPAIR / INSPECT / BALANCE
Vector Repairs Available:
Bell Crank Support P/N S6140-66612 ACRO RI 420004.1 - Worn sealing surface Housing P/N S6135-66606, S6135-66607, S6135-66605 ACRO RI 420017 - Corrosion in flange mounting holes Center Housing P/N S6135-66602 ACRO RI 420014.1 - Mounting feet worn/damaged both holes