Você está na página 1de 3

USING THE FORENSIC VM HARD DRIVES

ii. Select Hard Disk (SCSI) and click


Remove

1. Plug the USB hard drive into the cable on the desk.
Do not us the front USB ports as these are slower.
Make sure that the USB hard drive is the only USB
storage device plugged in.
2. Start VMware WorkStation For Forensics from
the VMWare folder on the Start Menu
3. From the File menu in VMWare choose Open and find
Ubuntu or Windows 7 from the I: drive
4. The first run of either will require you to set up your
hard drive.
a. For Windows
i. On the left of the VMWare window click
Edit virtual machine settings
iii. Choose add and select Hard Disk
and click Next
iv. Make sure SCSI is selected and the click
Next
v. Choose Use a physical disk and
click Next
vi. Select PhysicalDrive 1 and Use
individual partitions and then click
Next

vii. Select Partition 0, Partition 1 and


Partition 2 and click Next

If PhysicalDrive1 is not available close


VMWare and make sure the USB drive is
plugged in and go back to step 1
viii. Click Finish to save the disk
configuration and then choose OK on
the Virtual Machine Settings dialogue

b. For Linux
i. Follow the same procedure as above
but when selecting partitions choose
Partition 0 and Partition 1 ONLY

5. You can now power on your virtual machines.

Você também pode gostar