orifices existent on the actuator. Do not tight them completely. The bolts are not supplied with the mounting bracket and they must be in accordance with size and thread of the actuator holes.
2- Attach the magnet bracket to the
Actuator extremity (NAMUR). The end the valve shaft must comply with Namur Standard.
3 Fasten the hex screw.
4 Attach the magnet to the NAMUR
adapter. Do not fasten the bolts completely, allowing the magnet rotation.
5 Mounting the positioner bracket
through the threaded rods.
Mounting Instructions
BFY MOUNTING BRACKET FOR POSITIONER FY
6 Use the centralizer gadget to get the
bracket centralized with the magnet.
7 Adjust the positioner bracket using the
centralizer gadget and the nuts to get the height.
8 Place the nut and washers.
Do not fasten the nuts completely.
9 Tighten the clamp bolts to fasten them
to the actuator.
10 Fasten the positioner bracket bolts to
the clamps fastening.
11 Remove the centralizer gadget and
fasten the positioner to the positioner bracket.
Mounting Instructions
BFY MOUNTING BRACKET FOR POSITIONER FY
12 Put the pressure equivalent to the half
of the stem and adjust the magnet position to have the arrows matching.