Appendix A
Sketch Geometry Creation Options
AMGU00O0D000ASCENT - Center fr Technical Knowtedge®
Geometry
‘The geometry creation tools are described in Table At.
Table A-1
Procedure
Line
Five
Enables you to sketch straight ines or arced
‘Segments. Soloct two points to create a line.
Selecting a third point wil create aline between
the second and third point
Line \
Spline |
“Usine =
Enables you to sketch a free-form curve. Select
‘multiple points to create the spline. The spline
willbe éravm through each point
Se
Figure A-2
‘Center point circle
O Galerranderdd
Enables you draw a circle by selecting ts
‘center point and a point on its perimeter.
“Tangent circle
oreaiew
Draws a circle based on three ines that you
‘solect. The crce will be tangent to all three
lines. There may be more than one circle that
‘can be drawn for any three given lines. You can.
contol which circle appears based on where
you select the lines. Selec the line near the
locations where the circle should touch.
Elipse
Sane
Creates an ellipse based on ts center, and one
point on each of ts major and minor axes.
Inventor: Irroduction to Sole Mesiling
AS