Escolar Documentos
Profissional Documentos
Cultura Documentos
BEGIN
1 Your Headset's Battery 2 Feature My phone does not find my headset.
On Your Phone
Start Here > > > Make sure the blue light on your headset is
steadily lit when your phone is searching for
Before using this product, read the Important Safety and Charge your headset's battery for 2 hours: Your phone's Bluetooth feature is off by devices (see step 3).
Legal Information pamphlet and follow its instructions. default. To use your headset, turn on the
Bluetooth feature in your phone.
Take a moment before you get started to My headset worked before but now it's
familiarize yourself with your new For most Motorola phones: not working.
H500 H500 Handsfree Headset. Make sure your phone is on and the
Bluetooth® (Menu ) > Settings > Connection >
1 Select M( Bluetooth feature is turned on in your phone
Handsfree Headset
Earhook Volume Bluetooth Link > Setup. (see step 2). If the Bluetooth feature has
Buttons been turned off or was turned on only
1 Plug the Motorola charger into the end of 2 Scroll to Power. temporarily, you may need to restart the
Get Connected in the headset. Bluetooth feature (see step 2). If you have
Call Button confirmed the Bluetooth feature is on in your
4 Quick Steps
The blue indicator light turns on when the
3 Press Change. phone, pair your phone and headset again
1 - CHARGE battery is charging. It may take up to 1 (see step 3).
Blue minute for the light to turn on. When the 4 Scroll to On.
2 - START Indicator Support.
headset's battery is fully charged (about 2
BLUETOOTH Light hours), the blue indicator light turns off. 5 Press Select to turn on the Bluetooth If you need more help, contact us at
FEATURE feature. Bluetooth feature remains on until 1-877-MOTOBLU or visit us at
3 - PAIR 2 Unplug the charger from the headset. you turn it off. www.hellomoto.com/bluetooth and click
4 - TEST AND USE Note: These steps are for most Motorola phones. For
Support
Microphone Note: Headset is not functional while charging. other phones, see your phone's user's guide.
FOR MORE INFORMATION ON USING MAKING CALLS MAKING CALLS CONTINUED INDICATOR LIGHTS AUDIO TONES
YOUR MOTOROLA H500 The indicator light provides information about The audio tones provide information about your
Visit us at www.hellomoto.com/bluetooth and your headset status. headset status.
click Support. Function Action Function Action
Make a voice dial call Tap the Call button Toggle between two Press and hold Audio Tone Headset Status
With the Charger Plugged In
SUPPORT and speak the active calls the Call button Single high tone when Volume at minimum
name after the tone Headset Indicator Headset Status pressing volume button or maximum
If you need more help, contact us at Join a 3-way call Press and hold
1-877-MOTOBLU. End a call Tap the Call button both Volume buttons On (steady) Charging Five rapid high tones Low battery
Off Charging complete repeated every 60 sec.
Receive a call Tap the Call button Put an active call on Press and hold the
hold or resume a call Call button until you No audio indications; Out of range
Reject a call Press and hold the With No Charger Plugged In deteriorating quality
on hold hear a beep
Call button until you
hear a beep Transfer a call from the Tap the Call button Headset Indicator Headset Status Ring tone Incoming call
phone to the headset Off Power off Single high tone Pairing confirmation
Redial last call Press and hold the
Call button until you Disable or enable the Press and hold On (steady) Pairing mode Single low tone Voice activation
hear a beep indicator light both Volume 10 rapid flashes Pairing successful Dual high/low tone Voice tag not
buttons for 3 to 4 recognized
Answer a second Press and hold the Slow pulse Connected
seconds
incoming call Call button (places (on a call) Single high tone End call
first call on hold) Mute or unmute a call Tap both Volume
buttons Quick flash Standby Low to high tone Phone network
Note: Your H500 supports both Handsfree and Headset (not on call) not available
Profiles. Accessing call functions depends upon which Note: Some features are phone/network dependent.
Note: After 5 minutes of inactivity, the light stops flashing to Two ascending tones Mute enabled
profile your phone supports. See your phone's user's guide
conserve power, but the headset remains in standby mode. Two descending tones Mute enabled
for more information.