A rockbolt face plate or bearing plate serves the purpose to support the loose rock around the rockbolt head as well as to distribute the load that comes on the bolt head uniformly into the surrounding rock. However, the ability to accomplish this depends on the choice of face plate. The Swellex Face Plate is specially designed to support the surface rock without introducing unfavorable stresses in the bolt head. The elliptical hole as well as the dome ensure that the plate always sits flat against the rock surface independently of the roughness of the rock surface or the angle of the bolt. The Swellex Face Plate is made of HSLA steel (High Strength Low Alloy) chosen for its superior characteristics in very demanding underground conditions.
Specifications Part Number
3125 5655 01 for
Standard Swellex1)
3125 5655 11 for
Super and Midi Swellex1)
Minimum plate dimensions
Bolt hole dimensions Deflection at 30 kN, maximum Minimum breaking load
145 x 145 mm 2) 29 x 39 mm 0.5 mm 2.0 mm 50 kN
145 x 145 mm 2) 39 x 44 mm 0.5 mm 2.0 mm 50 kN
1) QUALITY STANDARDS: AC-STD 1295 K, 4559 K and 4560 K.
2) Standard plate dimension: 150 x 150 x 4 mm including a 1.5 ton capacity, 15 mm diameter attachment hole in one corner
This specification sheet replaces earlier released specifications.
Bearings And Bearing Metals: A Treatise Dealing with Various Types of Plain Bearings, the Compositions and Properties of Bearing Metals, Methods of Insuring Proper Lubrication, and Important Factors Governing the Design of Plain Bearings
ChatGPT Money Machine 2024 - The Ultimate Chatbot Cheat Sheet to Go From Clueless Noob to Prompt Prodigy Fast! Complete AI Beginner’s Course to Catch the GPT Gold Rush Before It Leaves You Behind