Power Manual DCL2V-9A UPS
Tho uso of irdustrial grade
electronic power components, the use
of international advanced technology
level), and its anti-interference
abil}, stable and reliabie.
First, the scope of application of
The power applied to a wariety of
batiding intercom, access a variety
of import end ‘export controls,
particularly applicable to a variety
Of electric locking drive,
Second, the Funct ienat
characteristics of
1) AC inpat Voltage Aci0ov-260V;
2) De output voltage of 12¥s
3) output current 0 ~ 5a;
4) output voltage accuracy of + 18;
5) The ripple voltage Up pS 50m;
6) output power: 60M.
Third, outesde the steel Sine: 212mm
x T7etm 70m
Waight: 3150; protection grade: 2
Fourth, the output terminal wiring
Glagram: Figure
V. terminal Description:
1:3: NO-side with the CoM client,
without “always output after the fall Sure Loa fall sate Lock Beene
output cf the trigger button Dc12v,
fnen electronically controlled lock (delay 0-15 seconds, 1 positive, 3 negative);
2-3: NC and COM client side, normally closed outpwy DC12V, triggered after the power button, and the
plug electric ox magnetic lock (0-18 seconds delay, 2 positive, 3 negative);
4-5: DC12V output regulator, 4 positive, 5 negative;
5-6: Input button to open the door (on the power supply negative), which can be accessed by switch:
autput (relay output, lew-level) access contral olectkic lack eontrollor;
5-7: Input button to open the door (on tho positive power supply), which can be accessed by switch:
output (rolay output, high) to control the access af electric locking controllers
8-9: 12V input voltage to open the door, designed to directly control the output voltage of the elect:
locking access controller; ;
10-11: access 12V battery.