Escolar Documentos
Profissional Documentos
Cultura Documentos
M VsDuksykWth
CENTRAL INSTITUTE OF PLASTICS ENGINEERING & TECHNOLOGY
(jlk;u ,oa isVªksjlk;u foHkkx] jlk;u ,oa moZjd ea=ky;] Hkkjr ljdkj)
(Dept. of Chemicals & Petrochemicals, Ministry of Chemicals & Fertilizers, Govt. of India)
Ekq[;ky; : fx.Mh] psUuS - 600 032 / Corporate Office : Guindy, Chennai - 600 032.
Email : cipethq@vsnl.com, Website : www.cipet.gov.in
PROSPECTUS
ACADEMIC PROGRAMMES 2010-11
Welcome to Cipet
CIPET – a premier National Institution under the
Department of Chemicals & Petrochemicals,
Ministry of Chemicals & Fertilizers, Govt. of India is
fully devoted to Academic, Technology Support,
Research & Development activities in the area of
Plastics Engineering and Technology.
CIPET renders Technology Support Services in Design, Tooling, Processing, Testing & Quality Assurance for the
benefit of Plastics and allied Industries. The services are well utilized by the plastics industry for their growth and
prosperity. The organizations like Indian Space Research Organisation (ISRO), Hindustan Aeronautics Limited (HAL),
Ordnance Factory Board (OFB), Electronic Corporation of India Limited (ECIL) are few of the major Public Sector and
Govt. organizations recognized CIPET as their prospective vendor for precision tooling and Mould & Product
development. The Plastics Testing Centre is one of the best testing facilities in Asia and the laboratory is accredited by
NABL. Further, CIPET is in the process of getting NABCB Accreditation for pre –delivery inspection services.
The vision of two Research & Development Wings – Advanced Research School for Technology & Product Simulation
(ARSTPS) at Chennai and Laboratory for Advanced Research in Polymeric Materials (LARPM) at Bhubaneswar have
been conceived with objectives of transforming CIPET as a Global Research Centre on Polymeric Materials as well as a
resource centre for newer concept development & conversion of concept into reality by product development on
commercial scales. Technology transfers, Creation of Intellectual Property (CIP), knowledge base with validated
documentation are the key aspects of functioning of these R&D Wings.
CONTENTS
1. Institute Profile......................................................................................................................1
2. Objectives..............................................................................................................................1
3. Activities................................................................................................................................1
4. Academic ...............................................................................................................................2
CIPET Programmes.................................................................................................................2
Post Graduate Diploma //Diploma Programmes
i) Post Diploma in Plastics Mould Design..........................................................................2
ii) Diploma in Plastics Mould Technology...........................................................................2
iii) Diploma in Plastics Technology.....................................................................................2
iv) Post Graduate Diploma in Plastics Processing & Testing...............................................2
UG & PG Programmes............................................................................................................3
Post Graduate Degree Programmes......................................................................................3
i) M.Tech in Plastics Engineering/Technology....................................................................3
ii) M.Tech.in Polymer Nano Technology.............................................................................3
iii) M.E (CAD/CAM )...........................................................................................................4
Under Graduate Degree Programme.....................................................................................4
B.Tech.in Plastics Engineering/Technology.............................................................................4
5. Placement..............................................................................................................................5
6. Alumni...................................................................................................................................5
Beyond the Class Room..........................................................................................................6
7. Faculty...................................................................................................................................7
8. Library...................................................................................................................................7
9. Accreditation.........................................................................................................................7
10. Achievements........................................................................................................................8
11. Global Recognization ............................................................................................................8
12. Research & Development activities........................................................................................9
13. CIPET Publications................................................................................................................10
14. Facilities
a. Design/CAD/CAM/CAE.....................................................................................................10
b. Tool Room........................................................................................................................11
c. Testing & Quality Control..................................................................................................12
d. Plastics Processing...........................................................................................................13
15. Fee Structure .......................................................................................................................13
16. How to apply?......................................................................................................................14
17. Important Dates...................................................................................................................14
18. Selection Procedure.............................................................................................................14
19. Award of Stipend..................................................................................................................14
20. Meritorious Scholarship.......................................................................................................14
21. Admission Regulations........................................................................................................14
22. General Instructions............................................................................................................15
23. Training Rules & Regulations...............................................................................................15
1 INSTITUTE PROFILE 3 ACTIVITIES
Academic, Technology Support and Research &
Development.
Central Institute of Plastics Engineering & Technology (CIPET)
is a premier National Institution devoted to Academic, I. Academic
Technology Support & Research (ATR) for the Plastics & (a) Regular Long term Programmes
Allied industries, in India. First CIPET campus was established Ph.D.Programmes in Polymer Science / Material Science
?
by Government of India in 1968 at Chennai and subsequently 14 / Plastics Engineering at LARPM CIPET – Bhubaneswar
CIPET Campuses have been established by Government of Master of Technology in Plastics Engineering / Technology
?
India in the country. Today 15 CIPET Institutes – Ahmedabad, (M.Tech-PE/PT)
Amritsar, Aurangabad, Bhopal, Bhubaneswar, Chennai, Master of Engineering in CAD/CAM (M.E. CAD/CAM) at
?
Guwahati, Hajipur, Haldia, Hyderabad, Jaipur, Imphal, ARSTPS – CIPET, Chennai
Lucknow, Mysore and Panipat are contributing through ATR Master of Technology in Polymer Nano Technology
?
services to the industries in India and abroad. All the centres (M.Tech - PNT) at LARPM, CIPET, Bhubaneswar
have adequate infrastructural facilities in the areas of Design, Bachelor of Technology in Plastics Engineering /
?
CAD/CAM/CAE, Tooling & Mould Manufacturing, Plastics Technology (B.Tech-PE/PT)
processing, Testing and Quality Control. Post Graduate Diploma in Plastics Processing & Testing
?
(PGD-PPT)
The courses are designed to produce technically trained Diploma in Plastics Mould Technology (DPMT)
?
manpower for ready absorption in plastics industry. The Diploma in Plastics Technology (DPT)
?
infrastructure facilities in terms of machinery and equipment are Post Diploma in Plastics Mould Design (PD-PMD)
?
continuously upgraded/modernised to match with the (b) Short Term Programmes
technological development and needs of the industry globally. Skill & Technology Upgradation Programmes for Industry
?
To keep the industries abreast with the new technological Tailor-Made Courses
?
developments and update the skill levels of the personnel Modular programmes
?
working in the industry, short-term programmes, tailor-made Entrepreneural Development programmes
?
programmes, modular training programmes, technical seminars Training for Overseas Nationals
?
are conducted on Design, Tooling, Plastics Processing, Plastics II. Technology Support Services
Testing and Quality Assurance.
CIPET renders Technology Support Services (TSS) to
plastics and allied industries in different fields of Plastics
Engineering & Technology.
1
4 ACADEMIC
CIPET Programmes
(i) Post Diploma in Plastics Mould Design
Entry Qualification: 3 year Diploma in Mechanical, Plastics Technology, Tool/Production Engineering, Mechatronics,
Automobile Engineering, Tool & Die Making, DPMT/DPT (CIPET) or equivalent.
2
UG & PG Programmes
CIPET offers Post Graduate and Under Graduate Degree Programmes at
High Learning Centres at Ahmedabad, Bhubaneswar, Chennai, Lucknow
and also at Hajipur.
Affiliation
Affiliation
Bhubaneswar - Biju Patnaik University of Technology, Rourkela
.
*Selection and eligibility as per affiliating University norms.
3
(iii) Master of Engineering in CAD/CAM
Affiliation
Chennai - Anna University, Chennai.
Affiliation :
For Admission to Under Graduate programme(B.Tech-PE/PT), please apply through affiliating University.
4
5 PLACEMENT
CIPET plays a significant role in helping the plastics industry by providing vital input “Manpower” to achieve their
objectives with potential optimization. CIPET has forged close relationship with industrial and research establishments.
It is further reinforced through technology upgradation programmes – workshops, seminars, and entrepreneurship
programmes to provide an ideal platform for industry institute interface.
Few of the prominent placement partners
Placement Statistics for the last 5 years
Placement Entrepreneur
100 7
5 6 7
90 4
Percentage of Students
80
70
60
50 92
93
89 89 90 91
40
30
20
10
0
2004-05 2005-06 2006-07 2007-08 2008-09
CIPET has an established brand equity in “Human Resource Market” and CIPET graduates enjoy good reputation among
plastics and allied industry in the domestic as well as international market. CIPET is the preferred destination for campus
and off campus recruitment for hundreds of reputed companies / organisations and business houses to fulfil their
manpower requirement.
.
Placement cell at CIPET Corporate and centres has constantly network with business houses and industry to update the
list of prospective employers and synchronise the training inputs to skill levels of students at required level in industry.
Placement cell facilitate the students in organising campus recruitements..
6 ALUMNI
CIPET has a vibrant alumni consists of 32,000 members spread across the globe in
various positions.CIPET Alumni has created a bond between them and their Alma
Mater. The strength of Alumni speaks about the quality of the Institution.They are
extending their support to the Institution in all possible ways.
CIPET Alumni has launched an E- magazine CIPET Alumni has launched a website
in May '09. www.cipetalumni.com
5
Beyond the Class Room
Apart from academics, CIPET trainees actively take part in extra curricular activities such as sports, cultural
programmes also.
Fresher’s Day
Sports Day
Cultural Activities
6
7 FACULTY Overseas Training of Faculty
8 LIBRARY
All the centres of CIPET across the country have a good library with
books related to Plastics Technology. The collection includes some
rare books on Plastics. The Total number of books in the libraries at all
the centres is around 35,000. Journals relevant to the Curriculum of all
the courses offered at CIPET are available at all libraries in order to
keep the students abreast with the latest development in their field of
study. Keeping in pace with the latest advancement in the Information
Technology, Digital library is being established wherein the students
will have access to the electronic books, journals and institutional
repositories. Specialised services like CAS will be implemented for
the benefit of the students.
?9 ACCREDITATION
ISO 9001 : 2000 certified institution for training and technical activities.
?
All India Council for Technical Education (AICTE), New Delhi has approved M.Tech and B.Tech Programmes
?
AICTE approved Diploma, Post Diploma and Post Graduate Diploma Programmes.
?
NABL Accreditation for CIPET Plastics Testing Laboratory
?
Recognised by Bureau of Indian Standards (BIS) for raw material and product evaluation.
?
Recognised centres for carrying out research work leading to Ph.D/Doctorate Programme at CIPET Chennai,
?
Bhubaneswar & Lucknow.
Recognised by Department of Scientific and Industrial Research (DSIR), Government of India, as Scientific and
?
Research organisation in the field of Plastics Technology.
In the process of getting NABCB Accreditation as per ISO/IEC -17020 for Pre Delivery Inspection Services.
?
7
10 ACHIEVEMENTS
CIPET has been bestowed with “Green Tech Environment Excellence Award in Silver Category” for the year 2002-03 for
its significant contribution in the field of Plastics & Environment Education & Management.
CIPET has been awarded with PLASTICON Award 2005 - Runner – up by Plastindia Foundation for “Outstanding
Contribution in Plastics Education & Training in India”.
11 GLOBAL RECOGNIZATION
The Institute is involved in collaborative programmes at international and national levels in order to remain at the forefront
on the technological development in the field of Plastics and allied areas and to share its experience with them. Some of
the facets of these collaborations include students and faculty exchange, joint research, Product development, creation
of electronic media and exchange of academic materials for training. In order to have close cooperation in research work,
the Institute has signed Memoranda of Understanding (MoUs) with foreign universities, research institutes and industrial
organizations.
8
12 RESEARCH & DEVELOPMENT ACTIVITIES
Dedicated efforts have been taken for the future R&D vision of CIPET to be recognized as the Global R&D Wing in the
area of Ploymer Composites, Nanocomposites, Biopolymers, Functional Plastics, Carbon Nanotubes, Polymer
Membranes, Conducting Polymers, Fuel cells, E-Waste recycling, Innovative Product concept Development &
Commercialization by aid of CAD/CAM/CAE expertise etc. Inline with the R&D vision, the below mentioned 2 R&D wings
have commenced the activities.
Facilities Available:
Fourier Transform Infrared Spectroscopy ( FTIR)
?
Differential Scanning Calorimetry ( DSC)
?
Thermomechanical Analyser (TMA )
?
Thermogravametric Analyser ( TGA )
?
Karl Fischer Moisture Analyser
?
Transmission Electron Microscopy
?
X-ray Diffractometer
?
Ultraviolet Visible Spectrophotometry UV/VIS
?
Cone-Colorimeter
?
Scanning Electron Microscopy (SEM)
?
Parallel plate viscometer
?
Torque rheometer
?
Biodegradation Test set up
?
Focussed Area:
Product development and enhancement
?
Innovative product design for Automobile, Aerospace, Medical and
?
Packaging industries.
Computer Aided Engineering.
?
Product and Tool design conceptualization (Modelling, Analysis,
?
Process Optimisation & Simulation)
E-Manufacturing of prototypes.
?
Rapid prototyping for lead time reduction.
?
Rapid engineering for metal and conventional product
?
substitution.
9
13 CIPET PUBLICATIONS
I) International Journal
The International Journal of Plastics Technology (IJPT) is published by the Laboratory for Advanced Research in
Polymeric Materials (LARPM) of the Central Institute of Plastics Engineering & Technology (CIPET) to disseminate
research advancements in the areas of Polymer/Plastics Engineering & Technology. This is co-published by M/s.
Springer India.
CIPET Times is an in-house publication which includes the activities of all the CIPET centres. It also has the
technological development and article from eminent academicians/industrialists, Alumni activities, etc.
Text book on Fundamentals of Plastics Mould Technology and Fundamentals of Plastics Testing were released for
the benefit of CIPET trainees as well as for the industry personnel.
14 FACILITIES
The facilities at CIPET centres are among the best not only in India, but in whole South-East Asia including Middle-East. It
is worth mentioning that CIPET has all the facility under one roof in respect of Plastics Technology viz. Design, Tooling,
Processing, Testing & Quality Control, etc.
The equipments & machineries are utilized for providing hands- on practical training for students as well as employed for
undertaking industrial assignments for processing, design & development of mould, testing & evaluation of plastics
products as well for R&D projects on product/application development.
(a) DESIGN/CAD/CAM/CAE
3D Solid Modeling
?
Product design and mould validation of
?
- Injection Moulding
- Compression Moulding and
- Transfer Moulding
Extrusion die design, pipe die, sheet die & co-extrusion dies
?
3D digitizing and 2D digitizing (CAD drawing conversion)
?
A-0 plotting services using inkjet / laser plotting
?
Generation of CNC part programming
?
10
SOFTWARE
Integrated CAD software
Pro-E & wild fire 4.0, CATIA V5 R17, UGNX6,
IDEAS 6.0, pro-E, wild fire 5.0, ANSYS 12.0
HARDWARE
Server
SGI INDI CO,2 HP PROLIANT HL350, IBM E 230, IGB RAM 220GB HDD.
Nodes
SGI 02 Nodes , IBM Intellistation M-pro,512 MB RAM 40 GB HDD
Plotter
FAROARM
Workstation
HP INITIAW STATION xw 6400
IBM WORKSTATION
Inspection Facilities
· Co-ordinate Measuring Machine Universal Milling Machine Vertical Milling Machine
CNC Lathe
11
(C) TESTING & QUALITY CONTROL
Mechanical Laboratory
· Universal Testing Machine
· Izod/Charpy Impact Tester
· Xenon Arc Weatherometer
· Burst Strength Tester
· Climatic Chamber
· Tear Strength Tester
· Folding Endurance Tester
· Gas Permeability Apparatus
· Stiffness Tester
· Creep Tester
Thermal Laboratory
· Heat Distortion Temperature/Vicat Softening Point
· Melt Flow Indexer
· Oxygen Index Tester
· Flammability Tester
· Low Temperature Brittleness Point Apparatus
· Thermal Conductivity Apparatus
· Co-efficient of Thermal Expansion Apparatus
Chemical Laboratory
· Carbon Black Content Apparatus
· Biodegradability Testing apparatus Transmission Electron
Microscope
· Gas Chromatography
· ESCR Apparatus
12
(d) PLASTICS PROCESSING
· All Electric Injection Molding Machine
· Microprocessor Two color Injection Molding Machine
· Microprocessor Injection Moulding Machines
· Multilayer Blown Film Extrusion Plant
· Pipe & Blown Film Extruders
· Extruder for tubing
· Compression moulding machine
· Thermoforming machine
· Vacuum forming machine
· Rotational moulding machine
· Blow moulding machine
· Stretch Blow Moulding
Two Colour Microprocessor Controlled Injection All Electric Microprocessor Controlled Two Colour Microprocessor Controlled Injection Moulding Machine
Moulding Machine Automatic Injection Moulding Machine
15 FEE STRUCTURE
COURSE FEE (Per Semester - Six Months)
S.No. COURSE SPONSORED OPEN Hostel Room Charges & Electricity charges and CMD
(Rs) (Rs) (Based on CIPET center location)
1 M.TECH. 30,000 22,000 Hostel aspirants should have necessary amount to meet their
personal monthly expenses.
2 PD-PMD 20,000 10,000
2
5
3 4
13
16 HOW TO APPLY?
Information Brochure and Application form can be obtained from any of CIPET Centres against payment of Rs. 100/- for
general candidates and Rs.25/- for SC/ST candidates in cash or Demand Draft drawn in favour of “CIPET
CORPORATE” A/c No. 10565622390 payable at Chennai and the form can also be downloaded from our website
www.cipet.govt.in . Candidates belong to North - Eastern states can get the application forms and apply on free of cost
by producing their residential proof / appropriate support documents.
17 IMPORTANT DATES
Last date for issue of Application form ……………………………………….... 04th June 2010
Last date for submission of filled-in-Application form ……………………….11th June 2010
Joint Entrance Examination ………………………………………………….......11th July 2010
Commencement of Academic Session ………………………………………....16th Aug. 2010
18 SELECTION PROCEDURE
Selection for all courses is as below.
1. CIPET Programmes – based on academic record and performance in the Joint Entrance Examination.
2. For PG Programmes - selection through respective affiliating universities norms / through CIPET JEE
3. For UG Programmes - selection through respective affiliating university.
19 AWARD OF STIPEND
Stipend is awarded to meritorious students on merit-cum-means basis (condition apply).
20 MERITORIOUS SCHOLARSHIP
Industry Endowment Scholarship instituted by Industries like M/s Reliance Industries Ltd., M/s Supreme Industries Ltd.,
M/s Jain Irrigation Systems Ltd., Plastindia Foundation, Ferromatik Milacran India Ltd., Tamil Nadu Plastics
Manufacturers Association is being awarded to meritorious students as per norms.
21 ADMISSION REGULATIONS
Selection for admission to M.Tech/M.Sc Programmes will be as per the prescribed eligibility norms of the respective
affiliating universities. Only limited seats in M.Tech/M.Sc will be filled through JEE as per affiliating University norms.
· For all other Post Graduate Diploma, Post Diploma & Diploma courses, selection will be based on academic and
the performance in the Joint Entrance Examination, which is to be conducted on 11th July 2010.
· CIPET reserves a quota for SC/ST, OBC(NCL) candidates and physically challenged candidates as per norms.
· Age limit shall be as on 31st July 2010. Over-aged candidates will not be considered and hence need not apply.
· Age limit is relaxable upto five years for sponsored candidates in the case of Diploma / Post Diploma / Post
Graduate Diploma Programmes and thus are not eligible for the award of stipend.
· In the case of applicants belonging to SC/ST category & North Eastern Region, age limit is relaxable by five years
for all the categories of courses in the case of Diploma / Post Diploma / Post Graduate Diploma Programmes
· Limited Stipend is awarded to meritorious students of all courses based on merit-cum-means.
· Over-qualification will not carry any added advantage.
· In the case of PGD-PPT course, 2 years degree course (10+2+2) will not be considered and hence need not
apply.
· Candidate appearing for entry qualification examination can also apply. (Necessary documents to be submitted
on or before JEE.) Their selection and admission is subject to their eligibility for higher studies on successful
passing of the entry qualifications.
14
. Candidates not matching with the entry qualification and age limit will not be considered for admission and need
not apply.
. Limited hostel accommodation is available. Allotment of hostel accommodation is on need basis and
availability.
· No request for change of centre allotted for admission will be entertained during the course of study.
· The provisional selection will be cancelled for the candidate not accepting the allotment of admission within the
stipulated time indicated in the call letter and the wait list will be operated to fill the vacancies.
22 GENERAL INSTRUCTIONS
· The candidates selected for admission must deposit tuition and other fees on or before the specified date
stipulated in call letter.
· All fees from second semester onwards are to be paid within 2 weeks from the date of re-opening.
· Pattern of collection of fees :
1st Week - No Fine
2nd Week - Fine of Rs. 25/- leviable
Beyond 2nd week-
· The name will be automatically struck off from the rolls. Re-admission will be made on payment of Rs. 500/-
before the last working day of 3rd week, failing which they will be removed from the rolls.
· The selected candidates have to sign the code of conduct proforma at the time of admission.
· The selected candidates have to submit original certificates in support of their entry qualification, date of birth,
community certificates and any other reservation quato certificate (if applicable) for verification at centre.
· Practical oriented training is conducted on shift basis depending on the exigencies. The students are required to
attend the training programmes in rotational shifts in alive industrial environment.
· The institute reserves the right to dismiss/terminate any student from the course on grounds of communicable
diseases / unsatisfactory performance / lack of attendance / misconduct / ragging.
· As per the Hon'ble Supreme Court of India Order, “any incident of ragging comes to the notice of the
authority, the concerned student shall be given liberty to explain and if his explanation is not found
satisfactory, the authority would expel him/her from the institution.”
· No individual correspondence of any sort will be entertained.
A trainee is eligible for award of CIPET Diploma/Degree only upon successful completion of the course of study
(theory/practical/dissertation/industrial training) for a period stipulated against each course from time to time as per the
prescribed syllabus/curriculum.
The subjects of study – theory / practicals / dissertation / industrial training will be in accordance with the syllabus /
curriculum prescribed from the time to time.
15
· Trainees who fail to compensate the lack of attendance will be debarred from continuing their course of study to
the next semester.
· No student will be allowed to appear for the examinations unless he/she has attended 90% of the training
programmes during the semester.
· Semester examination will be conducted at the end of each semester both in theory and
practicals/seminar/project/viva voce.
· The scheme of evaluation is through internal assessment and semester examination.
· The internal assessment/sessional marks for each subject/practical is awarded on the basis of continual
evaluation of each trainee by the faculty of concerned for a maximum of 20/40/50/100 marks accordingly.
· Semester examinations are conducted for each subject/practical for a maximum of 30/60/100 marks
accordingly.
· Seminar/Project Viva Voce examination are conducted for a maximum of 100 marks.
· A trainee who fails in any subject is ought to appear for the supplementary examination to clear the arrear/s and
is allowed to continue the course of study without any break as such. There is no limit on the number of
attempts for the supplementary examination. However, he/she shall have to clear the arrear subject/s
within a period of two years from the date of completion of the course. Failing which, he/she will not be eligible to
appear for the supplementary examinations after the period of two years as stipulated above.
PASSING REQUIREMENTS
· A trainee is declared to have passed the examination in a subject if he/she secures not less than 40% in theory
and 50% in practicals / seminar / project work / viva voce examinations both in internal assessment (for theory
subjects and practical only) and semester examination of the total prescribed maximum marks.
· In the case of supplementary examinations, 40% in theory and 50% in practicals / seminar / project / viva voce
examination are the required passing mark of the total prescribed total marks (internal assessment/sessional
marks of the first appearance will be taken into account).
· Course completion certificate will be issued to the trainees only on successful completion of all semesters
(passing all subjects) excepting the final semester. A trainee who has arrear/s in the previous semester/s is not
eligible for the course completion certificate.
AWARD OF DIPLOMA
· A trainee will be eligible for the award of diploma only upon successful passing of all subjects of all semesters.
· Failed candidates will be eligible for the award of diploma only upon successful passing of arrear subject/s of all
semesters within two years from the date of completion of the course. Otherwise, they are not eligible for award
of diploma.
· A successful trainee who secures an aggregate of not less than 80% marks in all the semesters is declared to
have passed in First Class with Distinction provided the trainee passes all the subjects of semester
examinations in first attempt.
· A successful trainee who secures an aggregate of not less than 60% marks in all the semesters is declared to
have passed in First Class provided the trainee passes all the subject/s of semester examination in first attempt.
· All other successful trainees will be declared to have passed in Second Class.
***
16
CIPET Corporate & Centres
GUJARAT BIHAR
Deputy Director Deputy Director
CIPET CIPET
Plot No. 630, Phase-IV, GIDC, Vatva, EPIP Complex, Hajipur Industrial Area,
Ahmedabad – 382 445. Hajipur – 844 101.
Tel : +91-79-25832267, 40083901 Tel : +91-6224-277424, 273515
Fax : +91-79-25835236 Fax : +91-6224-275316
Email : cipetad1@sancharnet.in Email : cipetpat@sancharnet.in
ORISSA RAJASTHAN
Chief Manager(Project) Manager (Project)
CIPET CIPET
B-25, CNI Complex, PO-Patia SP-1298, Sitapura Industrial Estate,
Bhubaneswar – 751 024. Phase – III,Tonk Road, Jaipur - 302 022
Tel : +91-674-2743767, 2743462 Tel : +91-141-3239784
Fax : +91-674-2743863. Fax: +91-141-2770736
E-mail: cipet_bbsr@sify.com Email : cipet_jaipur@yahoo.co.in
TAMILNADU KARNATAKA
Deputy Director
Deputy Director
CIPET
CIPET
437/A, Hebbel Industrial area
Thiru-vi-ka Industrial Estate, Guindy,
Mysore –570016
Chennai-600032.
Karnataka.
Tel : +91-44-22254710, 22254701 – 706
Tel : +91-821-2511903, 2510618
Fax : +91-44-22254707
Fax : +91-821-2510990
Email : cipetchn@eth.net
Email : cipetmys@sancharnet.in
ASSAM HARYANA
Deputy Director
Manager (Project)
CIPET
CIPET
P.O: Changsari,District: Kamrup,
GT Road, Sewah Gaon,
Guwahati – 781 101
Panipat-132108, Haryana
Tel : +91-361-2680747, 2680622
Tel : +91-180-3297993
Fax : +91-361-2680281
Fax: +91-180-2565097
Email : cipetghy@vsnl.net,
Email : cipetpanipat@yahoo.co.in
cipet_ghy@rediffmail.com
MANAGER (Training)
CIPET Corporate Office: TVK Industrial Estate, Guindy, Chennai - 600 032. INDIA
Tel: 044-22254780,22254783,22254784, Fax: +91-44-22254779
E-mail: ctpc1@rediffmail.com, cipethq@vsnl.com Website: www.cipet.gov.in