Você está na página 1de 8

COMAIN

Light Modular Formwork

// Simple handset all-rounder

// Table of content

Features
Benefits
Solutions
Basic components

2
2
4
7

COMAIN Light Modular Formwork

// Features
Light crane-independent formwork for walls and
foundations.
Permissible concrete pressure: 40 kN/m2.
3 different panel heights: 2.4 m / 1.5 m / 1.2 m.
Panel widths of 0.9 m / 0.6 m / 0.45 m / 0.3 m / 0.2 m
in most heights.

// Benefits
Panels of maximum lightness.
Perfect for vertical structures in small or large areas: walls, foundations,
beam sides, overhanging slabs (wall-slab connection cast in one piece),
columns.

COMAIN Light Modular Formwork

Simple joining of panels with bolt


(consisting of bolt and captive wedge).

Sequence for panel assembly with bolt:

1.- Insert the bolt into the hole

2.- Turn the bolt 90

3.- Fix the wedge of the bolt

Utmost flexibility due to wide panels range (including


universal and corner panels) for any geometry and
dimension.
Optimised form tie placing.
Lifting, transfer and placing of entire formwork units
possible achieving highest efficiency.

Wide height range


0.2

0.3

0.45

0.6

3.0

0.9

2.4
1.8

1.2 m panel range


0.2

0.3

0.45

0.4

0.5

0.6

0.3

0.65

0.45

0.75

0.7

0.6

0.8

0.3

0.45

0.75

0.2

0.3

1.35

1.2

1.05

0.9

0.45

0.95

1.0

1.2

0.9

1.5 m panel range


0.6

0.9

1.1

1.5

1.65

1.8

1.95

2.1

2.25

2.4

2.55

2.7

2.85

0.6
3.0
2.4

2.4 m panel range


0.2

0.3

0.4

0.45

0.5

0.65

0.6

0.75

0.8

3.0

COMAIN Light Modular Formwork

// Solutions
Wall formwork

Straight walls

Circular walls

COMAIN in gallery wall

Climbing formwork

Formwork for foundations and footings

COMAIN Light Modular Formwork

Beam and slab formwork

COMAIN as beam side formwork

COMAIN on ENKOFLEX shored with ALUPROP towers

Slab edge

Column formwork

Tall columns surrounded with BRIO Modular Scaffolding for access and
working platforms

COMAIN columns stabilised with push-pull props

Other applications are as pier cap

COMAIN Light Modular Formwork

Technical solutions

Stabilisation

Working platforms

Fillers

Corners not 90

Corners at 90

Bulkhead

Pilasters

COMAIN Light Modular Formwork

Basic components
kg

kg

COMAIN Panel 2.4 x 0.6 (1.44 m2)

1850188

46.9

COMAIN Int Hinged Corner 2.4 m

1850212

47.4

COMAIN Panel 2.4 x 0.45 (1.08 m2)

1850197

40.6

COMAIN Int Hinged Corner 1.5 m

1850404

29.8

COMAIN Panel 2.4 x 0.3 (0.72 m2)

1850202

28.3

COMAIN Int Hinged Corner 1.2 m

1850137

24.5

COMAIN Panel 2.4 x 0.2 (0.48 m2)

1850207

24.1

COMAIN Out Hinged Corner 2.4 m

1850319

17.6

COMAIN Panel 1.5 x 0.9 (1.35 m2)

1850372

42.1

COMAIN Out Hinged Corner 1.5 m

1850411

11

COMAIN Panel 1.5 x 0.6 (0.9 m2)

1850378

30

COMAIN Out Hinged Corner 1.2 m

1850316

COMAIN Panel 1.5 x 0.45 (0.675 m2)

1850382

25.9

COMAIN Panel 1.5 x 0.3 (0.45 m2)

1850386

17.9

COMAIN Panel 1.2 x 0.9 (1.08 m )

1850100

34.4

COMAIN Panel 1.2 x 0.6 (0.72 m2)

1850113

24.4

COMAIN Panel 1.2 x 0.45 (0.54 m2)

1850118

21

COMAIN Panel 1.2 x 0.3 (0.36 m2)

1850124

14.4

COMAIN Panel 1.2 x 0.2 (0.24 m2)

1850129

12.2

Bolt

1850134

kg

COMAIN lifting hook

1850322

4.6

8.8

COMAIN walkway bracket

1850173

8.8

Handrail support

1850278

2.6

Safety handrail S-V

1860516

3.9

Padlock

1850364

0.45

Top tie bracket

1850315

0.97

0.29

COMAIN Inside Corner 2.4 m

1850220

61

COMAIN Waler 3

1850433

18.2

COMAIN Inside Corner 1.5 m

1850390

38.1

COMAIN Waler 1.6

1850159

9.8

COMAIN Inside Corner 1.2 m

1850145

31.2

COMAIN Waler 0.75

1850162

4.8

COMAIN Outside Corner 2.4 m

1850223

14.6

COMAIN Outside Corner 1.5 m

1850394

9.2

Foundation head CMN

1850446

1.7

COMAIN Outside Corner 1.2 m

1850149

7.4

Foundation plate 25

1850453

16.6

COMAIN Outside Corner 0.6 m

1850435

3.7

Foundation plate

1850301

1.7

Hook

1850164

0.45

Long hook

1850183

0.71

Plate nut 15

7238000

0.73

ULMA C y E, S. Coop.
Ps. Otadui, 3 - P.O. 13
20560 Oati, Spain
T. +34 943 034 900
F. +34 943 034 920

01FDS06

www.ulmaconstruction.com

IMPORTANT:
Any safety provisions as directed by the appropriate governing agencies must be observed when using our products. The pictures
in this document are snapshots of situations at different stages of assembly, and therefore are not complete images. For the
purpose of safety, they should not be deemed as definitive. All of the indications regarding safety and operations contained in
this document, and the data on stress and loads should be respected. ULMAs Technical Department must be consulted anytime
that field changes alter our equipment installation drawings. The loads featured in this document, related to the basic elements
of the product, are approximate. Our equipment is designed to work with accessories and elements made by our company only.
Combining such equipment with other systems is not only dangerous but also voids any or all our warrantees. The company

reserves the right to introduce any modifications deemed necessary for the technical development of the product.
All rights reserved. Neither all nor part of this document may be reproduced or transmitted in any way by any electronic or
mechanical procedure, including photocopy, magnetic recording or any other form of information storage or retrieval system
without the written permission.
Copyright by ULMA C y E, S. Coop

Você também pode gostar