Escolar Documentos
Profissional Documentos
Cultura Documentos
SECTION
DATE
FILE welded_connection_1.xls
TIME
TITLE
1
03/22/16
7:49 AM
DESCRIPTION
Note: The lifting lug shown above is used in lifting pipes for placement in the shaft of the water filtration plant.
Pipe wall thicknesses vary between 32 mm and 12 mm with variation in pipe weights. For this application it will be assumed that
the maximum force is as shown above and acts on the maximum pipe wall thickness.
INPUT
performance factor
load factor
weld size ( leg )
lug thickness
lug length
wall thickness
applied force
ultimate plate strength
ultimate electrode strength
angle of axis force/weld line
phiw =
lf
=
ws
=
tlug =
llength =
twall =
Vf
=
Fu
=
Xu
=
theta =
CALCULATIONS
min. plate thickness
cross section plate
weld length
cross section weld
shear resistance base metal
shear resistance weld
resulting shear resistance
t
=
Am
=
wlengt =
Aw
=
Vrfb =
Vrfw =
Vrf
=
0.67
1.4
10
25
300
32
212
0.45
0.48
45
MIN(tlug,twall)
=
t*wlength
=
llength*2
=
ws*wlength
=
0.67*phiw*Am*Fu
=
0.67*phiw*Aw*Xu*(1+.5*SIN(RADIANS(=
MIN(Vrfb,Vrfw)
=
= Vrf/(Vf*lf)
25
15000
600
6000
3030.1
1521.4
1521.4
5.1
mm
mm
mm
mm
kN
kN/mm2
kN/mm2
degree
mm
mm2
mm
mm2
kN
kN
kN
$13.13.2.2
$13.13.2.2
$13.13.2.2
This template provides necessary macros to build up engineering calculations for quick re-calc
and clear
presentation.
Key
functions:
- set up formulae
- page setup
HOW TO USE
[0]
[1]
Save this file first with another appropriate name. Ensure this file is put in the same directory as
your the
newly
saved
file.
Use
styles
as in
sheet 'sample' to fill in title, logo, etc.
[2]
Define variables, equations, units. Make sure not to use cell locations as variable names!
[3]
Use macro 'formatted' to calculate the defined formulae. Bring up a list of macro by ALT-F8.
SHEET STRUCTURE
Ranges:
Column A:
section descriptions
Column B:
variable/formula description
Column C:
formulae
Column G:
Column H:
units
MACRO DESCRIPTIONS
formatted
validate and calculate all the variables and formulae. All variable referenced in the formulae have
to
be defined in the same sheet. The name of variable cannot duplicate the 'reserved words' of
setWidth
Adjust column widths so that it looks like that in sheet 'sample'.
CREDITS
This template is first created by Mr. Michael Gedig using the ideas from Dr. S. F. Stiemer's and
Mr. David S.K. "auto123.wks". Mr. Ye Zhou got his hands on it and further improved it a bit.