Você está na página 1de 1

HOME ASSIGNMENT QUESTIONS

1) Design a dual input , balanced ouput differential amplifier with a constant current bias to
satisfy the following requirements: differential voltage gain Ad=4010, current supplied
by the constant current bias circuit=4mA, supply voltages Vs=10V
2) Design the op-amp circuit which can give the output as V0=2V1-3V2+4V3-5V4.
3) Design a practical integrator circuit with a DC gain of 10, to integrate a square wave of
10KHZ.
4) Design an op-amp Schmitt trigger with the following specifications: UTP=2V, LTP=-4V,
and the output voltage swings between 10V.
5) Design a triangular wave generator with a frequency of f0=5KHZ, V0(p-p)=10.5V,. The opamp saturation voltage is 15V.
6) Design a Notch filter for fN =8KHZ and Q=10. Choose C=500pF.
7) Design a wide band reject filter having fH =200HZ and fL =1KHZ. Assume necessary data.
8) Design 4-bit R-2R ladder type DAC with a resolution of 0.5V.
9) Design a voltage regulator using IC723 to get a voltage output of 3V.
10) Design a monostable multivibrator for a pulse width of 10ms by using IC555.

Você também pode gostar