Escolar Documentos
Profissional Documentos
Cultura Documentos
1030/1230 - SERVICE
SERVICE
SERVICE
Date of purchase
Date of purchase
Serial number
Serial number
1030/1230 - SERVICE
SUPPORT PROCEDURE
1030/1230 - SERVICE
SUPPORT PROCEDURE
SUPPORT PROCEDURE
SUPPORT PROCEDURE
RESOURCES
RESOURCES
Publications
Publications
1030/1230 - FOREWORD
1030/1230 - FOREWORD
FOREWORD
FOREWORD
Read this manual before using your equipment. Keep it with the
equipment at all times for future reference. If you sell your
equipment, be sure to give this manual to the new owner.
Read this manual before using your equipment. Keep it with the
equipment at all times for future reference. If you sell your
equipment, be sure to give this manual to the new owner.
1030/1230 - FOREWORD
1030/1230 - FOREWORD
Operator's Manual
Operator's Manual
1030/1230 - CONTENTS
CONTENTS
1030/1230 - CONTENTS
CONTENTS
SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Support Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Support Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
FOREWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
FOREWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Underground Hazards . . . . . . . . . . . . . . . . . . . . . . . . 16
Underground Hazards . . . . . . . . . . . . . . . . . . . . . . . . 16
Emergency Procedures . . . . . . . . . . . . . . . . . . . . . . . 17
Emergency Procedures . . . . . . . . . . . . . . . . . . . . . . . 17
Jobsite Classification . . . . . . . . . . . . . . . . . . . . . . . . . 20
Jobsite Classification . . . . . . . . . . . . . . . . . . . . . . . . . 20
Safety Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Safety Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
1030/1230 - CONTENTS
1030/1230 - CONTENTS
TRANSPORTATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
TRANSPORTATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Tiedown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Tiedown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Haul . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Haul . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Freewheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Freewheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Tow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Tow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Daily Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Daily Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Driving. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Trenching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Trenching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Lubrication Overview . . . . . . . . . . . . . . . . . . . . . . . . . 48
Lubrication Overview . . . . . . . . . . . . . . . . . . . . . . . . . 48
Lubrication Schedule . . . . . . . . . . . . . . . . . . . . . . . . . 49
Lubrication Schedule . . . . . . . . . . . . . . . . . . . . . . . . . 49
Maintenance Schedule . . . . . . . . . . . . . . . . . . . . . . . . 56
Maintenance Schedule. . . . . . . . . . . . . . . . . . . . . . . . 56
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
1030 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
1030 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
1230 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
1230 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
1030/1230 - OVERVIEW
1030/1230 - OVERVIEW
OVERVIEW
OVERVIEW
1. Trail wheel
1. Trail wheel
3. Engine
3. Engine
4. Operator station
4. Operator station
1030/1230 - OVERVIEW
1030/1230 - OVERVIEW
1030/1230 - CONTROLS
1030/1230 - CONTROLS
CONTROL CONSOLE OVERVIEW
CONTROLS
CONTROLS
1. Bail
1. Bail
5. Throttle (black)
5. Throttle (black)
7. Power switch
7. Power switch
10
1030/1230 - CONTROLS
10
1030/1230 - CONTROLS
Bail
Bail
Release to disengage.
Release to disengage.
ic1034.tif
ic1034.tif
ic0127h.eps
ic0127h.eps
11
1030/1230 - CONTROLS
11
1030/1230 - CONTROLS
ic0014c.tif
ic0014c.tif
Speed/Direction Control
(Orange)
Speed/Direction Control
(Orange)
ic0013c.tif
ic0013c.tif
12
1030/1230 - CONTROLS
12
1030/1230 - CONTROLS
Throttle (Black)
Throttle (Black)
ic0128h.eps
ic0128h.eps
Power Switch
Power Switch
1030/1230 - CONTROLS
13
1030/1230 - CONTROLS
2. Choke
2. Choke
3. Pull start
3. Pull start
13
14
1030/1230 - CONTROLS
14
1030/1230 - CONTROLS
Choke
Choke
This valve regulates air/fuel mixture. Close valve to help start cold
engine.
This valve regulates air/fuel mixture. Close valve to help start cold
engine.
Pull Start
Pull Start
If engine does not start after three pulls, turn power switch off and
check for fuel blockage or electrical system problems.
If engine does not start after three pulls, turn power switch off and
check for fuel blockage or electrical system problems.
15
1030/1230 - SAFETY
15
1030/1230 - SAFETY
SAFETY
SAFETY
16
1030/1230 - SAFETY
16
1030/1230 - SAFETY
ACCESSORIES
ACCESSORIES
ACCESSORIES
ACCESSORIES
Fire Extinguisher
Fire Extinguisher
Lighting Kit
Lighting Kit
If you need additional light, plug lighting kit into provided outlet.
Contact your Ditch Witch dealer for further information.
If you need additional light, plug lighting kit into provided outlet.
Contact your Ditch Witch dealer for further information.
UNDERGROUND HAZARDS
UNDERGROUND HAZARDS
Hazards include:
Hazards include:
Electric lines
Electric lines
Water lines
Water lines
Sewer lines
Sewer lines
Storage tanks
Storage tanks
1030/1230 - SAFETY
17
1030/1230 - SAFETY
17
EMERGENCY PROCEDURES
EMERGENCY PROCEDURES
EMERGENCY PROCEDURES
EMERGENCY PROCEDURES
power outage
power outage
smoke
smoke
explosion
explosion
popping noises
popping noises
arcing electricity
arcing electricity
18
1030/1230 - SAFETY
18
1030/1230 - SAFETY
EMERGENCY PROCEDURES
EMERGENCY PROCEDURES
If you suspect an electric line has been damaged and you are on
tractor, DO NOT MOVE. Remain on tractor and take the
following actions. The order and degree of action will depend
upon the situation.
If you suspect an electric line has been damaged and you are on
tractor, DO NOT MOVE. Remain on tractor and take the
following actions. The order and degree of action will depend
upon the situation.
If you suspect an electric line has been damaged and you are off
tractor, DO NOT TOUCH TRACTOR. Take the following actions.
The order and degree of action will depend upon the situation.
If you suspect an electric line has been damaged and you are off
tractor, DO NOT TOUCH TRACTOR. Take the following actions.
The order and degree of action will depend upon the situation.
LEAVE AREA.
LEAVE AREA.
1030/1230 - SAFETY
19
1030/1230 - SAFETY
19
EMERGENCY PROCEDURES
EMERGENCY PROCEDURES
If you suspect a gas line has been damaged, take the following
actions. The order and degree of action will depend on the
situation.
If you suspect a gas line has been damaged, take the following
actions. The order and degree of action will depend on the
situation.
Warn others that a gas line has been cut and that they should
leave the area.
Warn others that a gas line has been cut and that they should
leave the area.
20
1030/1230 - SAFETY
20
1030/1230 - SAFETY
JOBSITE CLASSIFICATION
JOBSITE CLASSIFICATION
JOBSITE CLASSIFICATION
JOBSITE CLASSIFICATION
Inspecting Jobsite
Inspecting Jobsite
Junction boxes
Junction boxes
Drop boxes
Drop boxes
Light poles
Light poles
Manhole covers
Manhole covers
Sunken ground
Sunken ground
Classify jobsite.
Classify jobsite.
21
1030/1230 - SAFETY
21
1030/1230 - SAFETY
JOBSITE CLASSIFICATION
JOBSITE CLASSIFICATION
Selecting a Classification
Selecting a Classification
If working . . .
If working . . .
within 10 (3 m) of a buried
electric line
electric
within 10 (3 m) of a buried
electric line
electric
within 10 (3 m) of a natural
gas line
natural gas
within 10 (3 m) of a natural
gas line
natural gas
other
other
22
1030/1230 - SAFETY
22
1030/1230 - SAFETY
JOBSITE CLASSIFICATION
JOBSITE CLASSIFICATION
Applying Precautions
Applying Precautions
1030/1230 - SAFETY
23
1030/1230 - SAFETY
23
JOBSITE CLASSIFICATION
JOBSITE CLASSIFICATION
24
1030/1230 - SAFETY
SAFETY ALERT CLASSIFICATIONS
24
1030/1230 - SAFETY
SAFETY ALERT CLASSIFICATIONS
Watch for the three safety alert levels: DANGER, WARNING and
CAUTION. Learn what each level means.
Watch for the three safety alert levels: DANGER, WARNING and
CAUTION. Learn what each level means.
NOTICE can keep you from doing something that might damage
the machine or someone's property. It can also alert you against
unsafe practices.
NOTICE can keep you from doing something that might damage
the machine or someone's property. It can also alert you against
unsafe practices.
1030/1230 - SAFETY
25
1030/1230 - SAFETY
SAFETY ALERTS
SAFETY ALERTS
SAFETY ALERTS
SAFETY ALERTS
Moving digging
teeth will kill you or cut off arm or
leg. Stay away.
25
Moving digging
teeth will kill you or cut off arm or
leg. Stay away.
26
1030/1230 - SAFETY
SAFETY ALERTS
26
1030/1230 - SAFETY
SAFETY ALERTS
Jobsite hazards
could cause death or serious injury.
Use correct equipment and work
methods. Use and maintain proper
safety equipment.
Jobsite hazards
could cause death or serious injury.
Use correct equipment and work
methods. Use and maintain proper
safety equipment.
Crushing weight
could cause death or serious injury.
Use proper procedures and
equipment or stay away.
Crushing weight
could cause death or serious injury.
Use proper procedures and
equipment or stay away.
Moving parts
could cut off hand or foot. Stay
away.
Moving parts
could cut off hand or foot. Stay
away.
1030/1230 - SAFETY
27
1030/1230 - SAFETY
27
SAFETY ALERTS
SAFETY ALERTS
Fluid or air
pressure could pierce skin and
cause injury or death. Stay away.
Fluid or air
pressure could pierce skin and
cause injury or death. Stay away.
28
1030/1230 - SAFETY
SAFETY ALERTS
28
1030/1230 - SAFETY
SAFETY ALERTS
29
1030/1230 - SAFETY
29
1030/1230 - SAFETY
SAFETY ALERTS
SAFETY ALERTS
Avoid contact.
Avoid contact.
30
1030/1230 - SAFETY
SAFETY ALERTS
30
1030/1230 - SAFETY
SAFETY ALERTS
31
1030/1230 - TRANSPORTATION
31
1030/1230 - TRANSPORTATION
LIFT
LIFT
TRANSPORTATION
TRANSPORTATION
LIFT
LIFT
Lifting Points
Lifting Points
om1362.pcx
om1362.pcx
32
1030/1230 - TRANSPORTATION
32
1030/1230 - TRANSPORTATION
LIFT
Lifting Unit
LIFT
Lifting Unit
Crushing weight could cause
death or serious injury. Use proper procedures and
equipment or stay away.
33
1030/1230 - TRANSPORTATION
33
1030/1230 - TRANSPORTATION
TIEDOWN
TIEDOWN
TIEDOWN
TIEDOWN
Tiedown Points
Tiedown Points
om1363.pcx
om1363.pcx
34
1030/1230 - TRANSPORTATION
34
1030/1230 - TRANSPORTATION
HAUL
HAUL
HAUL
HAUL
Crushing weight could cause
death or serious injury. Use proper procedures and
equipment or stay away.
NOTICES:
NOTICES:
1030/1230 - TRANSPORTATION
35
1030/1230 - TRANSPORTATION
35
HAUL
HAUL
Loading
Loading
The 1030 and 1230 trenchers can be hauled in the bed of a light
truck or by trailer. To load:
The 1030 and 1230 trenchers can be hauled in the bed of a light
truck or by trailer. To load:
6. Lock axle.
6. Lock axle.
36
1030/1230 - TRANSPORTATION
36
1030/1230 - TRANSPORTATION
HAUL
HAUL
Unloading
Unloading
1. Remove tiedowns.
1. Remove tiedowns.
5. Engage bail.
5. Engage bail.
1030/1230 - TRANSPORTATION
37
1030/1230 - TRANSPORTATION
FREEWHEEL
FREEWHEEL
FREEWHEEL
FREEWHEEL
37
sf1014
sf1014
38
1030/1230 - TRANSPORTATION
38
1030/1230 - TRANSPORTATION
TOW
TOW
TOW
TOW
To tow:
To tow:
39
1030/1230 - OPERATION
39
1030/1230 - OPERATION
DAILY INSPECTION
DAILY INSPECTION
OPERATION
OPERATION
DAILY INSPECTION
DAILY INSPECTION
Check fuel lines and hydraulic lines and fittings for signs of
leakage, wear, or other damage.
Check fuel lines and hydraulic lines and fittings for signs of
leakage, wear, or other damage.
Check that all signs, guards, and shields are in place and
readable.
Check that all signs, guards, and shields are in place and
readable.
40
1030/1230 - OPERATION
40
1030/1230 - OPERATION
STARTUP
STARTUP
STARTUP
STARTUP
1030/1230 - OPERATION
41
1030/1230 - OPERATION
STARTUP
STARTUP
41
NOTICES:
NOTICES:
42
1030/1230 - OPERATION
42
1030/1230 - OPERATION
DRIVING
DRIVING
DRIVING
DRIVING
Incorrect procedures could result
in death, injury, or property damage. Learn to use
equipment correctly.
1030/1230 - OPERATION
43
1030/1230 - OPERATION
TRENCHING
TRENCHING
TRENCHING
TRENCHING
Jobsite hazards
could cause death or serious injury.
Use correct equipment and work
methods. Use and maintain proper
safety equipment.
43
Jobsite hazards
could cause death or serious injury.
Use correct equipment and work
methods. Use and maintain proper
safety equipment.
NOTICE: Know and comply with regulations covering One-Call
service and utility notification before digging.
44
1030/1230 - OPERATION
44
1030/1230 - OPERATION
TRENCHING
TRENCHING
1030/1230 - OPERATION
45
1030/1230 - OPERATION
TRENCHING
TRENCHING
45
NOTICES:
NOTICES:
om0045c
om0045c
46
1030/1230 - OPERATION
46
1030/1230 - OPERATION
TRENCHING
TRENCHING
47
47
TRENCHING
TRENCHING
LUBRICATION AND
MAINTENANCE
LUBRICATION AND
MAINTENANCE
Recommended Lubricants
Recommended Lubricants
GEO
Gasoline engine oil (see chart for appropriate SAE viscosity rating) meeting API engine
service classification SD
GEO
AGMA-7
AGMA-7
MPG
Multipurpose grease
MPG
Multipurpose grease
THF
Tractor hydraulic fluid, similar to Phillips 66 HG, Mobilfluid 423, Chevron Tractor Hydraulic
Fluid, Texaco TDH Oil, or equivalent
THF
Tractor hydraulic fluid, similar to Phillips 66 HG, Mobilfluid 423, Chevron Tractor Hydraulic
Fluid, Texaco TDH Oil, or equivalent
Gasoline engine oil (see chart for appropriate SAE viscosity rating) meeting API engine
service classification SD
NOTICES:
NOTICES:
48
48
LUBRICATION OVERVIEW
LUBRICATION OVERVIEW
LUBRICATION OVERVIEW
LUBRICATION OVERVIEW
AGMA-7
(MPG) Multipurpose
grease
AGMA-7
(MPG) Multipurpose
grease
Filter
Check level
Filter
Check level
49
49
LUBRICATION SCHEDULE
LUBRICATION SCHEDULE
LUBRICATION SCHEDULE
LUBRICATION SCHEDULE
Interval
Task
Page
Interval
Task
Page
Each use
50
Each use
50
51
51
52
52
54
54
52
52
52
52
53
53
54
54
55
55
55
55
100 hours
50
100 hours
50
250 hours
51
250 hours
51
500 hours
51
500 hours
51
54
54
53
53
10 hours
25 hours
50 hours
1000 hours
10 hours
25 hours
50 hours
1000 hours
50
50
LUBRICATION SCHEDULE
LUBRICATION SCHEDULE
Engine Oil
Engine Oil
Check
Check
Change
Change
51
LUBRICATION SCHEDULE
LUBRICATION SCHEDULE
Check
Check
Change
Change
51
52
52
LUBRICATION SCHEDULE
LUBRICATION SCHEDULE
Tires
Tires
Pivot
Pivot
Axle Lock
Axle Lock
53
LUBRICATION SCHEDULE
LUBRICATION SCHEDULE
Pivot Gearbox
Pivot Gearbox
Check
Check
Change
Change
53
54
54
LUBRICATION SCHEDULE
LUBRICATION SCHEDULE
Worm Drive
Worm Drive
Check
Check
om0049c
Change
Change
om1571
om1571
55
LUBRICATION SCHEDULE
LUBRICATION SCHEDULE
Digging Boom
Digging Boom
om0056c
Greaseable Boom
Greaseable Boom
om0056c
55
56
56
MAINTENANCE SCHEDULE
MAINTENANCE SCHEDULE
MAINTENANCE SCHEDULE
MAINTENANCE SCHEDULE
Interval
Task
Page
Interval
Task
Page
Each use
56
Each use
56
56
56
100 hours
56
100 hours
56
As needed
57
As needed
57
57
57
59
59
Trail Wheel
Trail Wheel
Tire Pressure
Tire Pressure
Air Filter
Air Filter
57
MAINTENANCE SCHEDULE
MAINTENANCE SCHEDULE
Adjustment Screw
Adjustment Screw
om1565
om1565
57
58
58
MAINTENANCE SCHEDULE
MAINTENANCE SCHEDULE
Grease Cylinder:
Grease Cylinder:
59
MAINTENANCE SCHEDULE
Drive Belts
Drive Belts
1
A
rg0020c.eps
1
A
rg0020c.eps
2
B
rg0012c.eps
59
MAINTENANCE SCHEDULE
B
rg0012c.eps
60
60
61
1030/1230 - SPECIFICATIONS
61
1030/1230 - SPECIFICATIONS
1030
1030
SPECIFICATIONS
SPECIFICATIONS
1030
1030
om0050c.eps
om0050c.eps
DIMENSIONS
U.S.
METRIC
DIMENSIONS
U.S.
METRIC
30 in
760 mm
30 in
760 mm
Trench width
4.3 - 6 in
110-150 mm
Trench width
4.3 - 6 in
110-150 mm
60
60
60
60
C1
Boom travel up
47
47
C1
Boom travel up
47
47
8.60 in
220 mm
8.60 in
220 mm
L2
Length
88 in
2.2 m
L2
Length
88 in
2.2 m
W2
Width
32 in
810 mm
W2
Width
32 in
810 mm
H2
Height
47 in
1.2 m
H2
Height
47 in
1.2 m
W4
Tread
26 in
660 mm
W4
Tread
26 in
660 mm
A3
Angle of departure
65
65
A3
Angle of departure
65
65
L4
Wheelbase
32 in
810 mm
L4
Wheelbase
32 in
810 mm
62
1030/1230 - SPECIFICATIONS
62
1030/1230 - SPECIFICATIONS
1030
DIMENSIONS
1030
U.S.
METRIC
DIMENSIONS
U.S.
METRIC
E1
15 in
381 mm
E1
15 in
381 mm
E2
17 in
432 mm
E2
17 in
432 mm
10.6 in
270 mm
10.6 in
270 mm
A2
Angle of approach
35
35
A2
Angle of approach
35
35
GENERAL
GENERAL
Ditch Witch model 1030, self-propelled, pedestrian, manually steered, twowheel drive rigid frame, chain type trencher
Ditch Witch model 1030, self-propelled, pedestrian, manually steered, twowheel drive rigid frame, chain type trencher
OPERATIONAL
OPERATIONAL
U.S.
METRIC
Vehicle speeds
U.S.
METRIC
Vehicle speeds
155 fpm
47 m/min
155 fpm
47 m/min
155 fpm
47 m/min
155 fpm
47 m/min
276 fpm
84 m/min
276 fpm
84 m/min
Outer diameter
12 in
305 mm
Outer diameter
12 in
305 mm
Inner diameter
4 in
102 mm
Inner diameter
4 in
102 mm
Length
9 in
229 mm
Length
9 in
229 mm
900 lb
408 kg
900 lb
408 kg
POWER
U.S.
METRIC
POWER
U.S.
METRIC
Fuel: gasoline
Fuel: gasoline
Number of cylinders: 1
Number of cylinders: 1
Displacement
20.6 in3
337 cm3
Displacement
20.6 in3
337 cm3
Bore
3.22 in
82 mm
Bore
3.22 in
82 mm
Stroke
2.52 in
64 mm
Stroke
2.52 in
64 mm
11 hp
8.2 kW
11 hp
8.2 kW
63
1030/1230 - SPECIFICATIONS
63
1030/1230 - SPECIFICATIONS
1030
1030
POWER
U.S.
METRIC
POWER
U.S.
METRIC
3400 rpm
3400 rpm
3400 rpm
3400 rpm
10.2 hp
7.5 kW
10.2 hp
7.5 kW
.89 gph
3.4 L/h
.89 gph
3.4 L/h
20
20
20
20
1.7 gal
6.5 L
1.7 gal
6.5 L
2.3 pt
1.1 L
2.3 pt
1.1 L
POWER TRAIN
POWER TRAIN
Tires
Tires
Drive, standard: 16x6.50x8
Trail: 13x5.00x6
Trail: 13x5.00x6
Digging teeth: bolt-on cup teeth with hard-surfaced edge of tungsten carbide
Digging teeth: bolt-on cup teeth with hard-surfaced edge of tungsten carbide
NOISE LEVELS
NOISE LEVELS
VIBRATION LEVELS
VIBRATION LEVELS
64
1030/1230 - SPECIFICATIONS
64
1030/1230 - SPECIFICATIONS
1230
1230
1230
1230
DIMENSIONS
U.S.
METRIC
DIMENSIONS
U.S.
METRIC
36 in
915 mm
36 in
915 mm
Trench width
4.3-6 in
110-150 mm
Trench width
4.3-6 in
110-150 mm
60
60
60
60
C1
Boom travel up
47
47
C1
Boom travel up
47
47
8.60 in
220 mm
8.60 in
220 mm
L2
Length
88 in
2.2 m
L2
Length
88 in
2.2 m
W2
Width
32 in
810 mm
W2
Width
32 in
810 mm
H2
Height
47 in
1.2 m
H2
Height
47 in
1.2 m
W4
Tread
26 in
660 mm
W4
Tread
26 in
660 mm
A3
Angle of departure
65
65
A3
Angle of departure
65
65
L4
Wheelbase
32 in
810 mm
L4
Wheelbase
32 in
810 mm
E1
15 in
381 mm
E1
15 in
381 mm
E2
17 in
432 mm
E2
17 in
432 mm
10.6 in
270 mm
10.6 in
270 mm
65
1030/1230 - SPECIFICATIONS
DIMENSIONS
A2
65
1030/1230 - SPECIFICATIONS
1230
1230
Angle of approach
U.S.
METRIC
DIMENSIONS
35
35
A2
Angle of approach
U.S.
METRIC
35
35
GENERAL
GENERAL
Ditch Witch model 1230, self-propelled, pedestrian, manually steered, twowheel drive rigid frame, chain type trencher
Ditch Witch model 1230, self-propelled, pedestrian, manually steered, twowheel drive rigid frame, chain type trencher
OPERATIONAL
OPERATIONAL
U.S.
METRIC
Vehicle speeds
U.S.
METRIC
Vehicle speeds
155 fpm
47 m/min
155 fpm
47 m/min
155 fpm
47 m/min
155 fpm
47 m/min
276 fpm
84 m/min
276 fpm
84 m/min
Outer diameter
12 in
305 mm
Outer diameter
12 in
305 mm
Inner diameter
4 in
102 mm
Inner diameter
4 in
102 mm
Length
9 in
229 mm
Length
9 in
229 mm
900 lb
408 kg
900 lb
408 kg
POWER
U.S.
METRIC
POWER
U.S.
METRIC
Fuel: gasoline
Fuel: gasoline
Number of cylinders: 1
Number of cylinders: 1
Displacement
23.7 in3
389 cm3
Displacement
23.7 in3
389 cm3
Bore
3.53 in
90 mm
Bore
3.53 in
90 mm
Stroke
2.52 in
64 mm
Stroke
2.52 in
64 mm
13 hp
9.7 kW
13 hp
9.7 kW
66
1030/1230 - SPECIFICATIONS
66
1030/1230 - SPECIFICATIONS
1230
1230
POWER
U.S.
METRIC
POWER
U.S.
METRIC
3600 rpm
3600 rpm
3600 rpm
3600 rpm
12 hp
8.9 kW
12 hp
8.9 kW
.89 gph
3.4 L/h
.89 gph
3.4 L/h
20
20
20
20
1.7 gal
6.5 L
1.7 gal
6.5 L
2.3 pt
1.1 L
2.3 pt
1.1 L
POWER TRAIN
POWER TRAIN
Tires
Tires
Drive, standard: 16x6.50x8
Trail: 13x5.00x6
Trail: 13x5.00x6
Digging teeth: bolt-on cup teeth with hard-surfaced edge of tungsten carbide
Digging teeth: bolt-on cup teeth with hard-surfaced edge of tungsten carbide
NOISE LEVELS
NOISE LEVELS
VIBRATION LEVELS
VIBRATION LEVELS
67
1030/1230 - WARRANTY
67
1030/1230 - WARRANTY
WARRANTY
WARRANTY
Major components are warranted for a period of 1000 hours of use or one year,
whichever occurs first, beginning on date of delivery of any such new product. The
Major Component Limited Warranty covers only Major Components listed under
Major Component Limited Warranty that are manufactured and distributed by The
Charles Machine Works, Inc. (CMW). Replacement parts and other serial
numbered products (Products) that are not listed under Major Component
Limited Warranty, and non-major components are covered under Product Limited
Warranty.
Major components are warranted for a period of 1000 hours of use or one year,
whichever occurs first, beginning on date of delivery of any such new product. The
Major Component Limited Warranty covers only Major Components listed under
Major Component Limited Warranty that are manufactured and distributed by The
Charles Machine Works, Inc. (CMW). Replacement parts and other serial
numbered products (Products) that are not listed under Major Component
Limited Warranty, and non-major components are covered under Product Limited
Warranty.
Frames.
Frames.
Mechanical transmissions.
Mechanical transmissions.
Hydraulic, hydrostatic, and fluid pumps, motors and components that control or
Auxiliary hydraulic control valves and electrical components used for controlling
hydraulic components.
Hydraulic cylinders and components excluding repair kits.
electrical systems.
Pierce Airrow bodies, strikers, and tailpieces.
Auxiliary hydraulic control valves and electrical components used for controlling
hydraulic components.
Hydraulic, hydrostatic, and fluid pumps, motors and components that control or
protect pumps and motors.
Free replacement parts and labor will be provided at any authorized dealership for
any part of Major Component which has a defect in material or workmanship
within warranty period. Defects will be determined by an inspection of major
component or part by CMW or its authorized dealer. The product containing a
major component or part must be presented to CMW or its authorized dealer for
inspection within 30 days of the date major component or part fails. CMW will
provide the location of its inspection facilities or its nearest authorized dealer upon
inquiry. CMW reserves the right to supply remanufactured replacement parts as it
deems appropriate.
Free replacement parts and labor will be provided at any authorized dealership for
any part of Major Component which has a defect in material or workmanship
within warranty period. Defects will be determined by an inspection of major
component or part by CMW or its authorized dealer. The product containing a
major component or part must be presented to CMW or its authorized dealer for
inspection within 30 days of the date major component or part fails. CMW will
provide the location of its inspection facilities or its nearest authorized dealer upon
inquiry. CMW reserves the right to supply remanufactured replacement parts as it
deems appropriate.
* Equipment owners in countries other than U.S., Canada, Mexico, and Puerto
Rico should refer to Ditch Witch International Warranty Policy.
* Equipment owners in countries other than U.S., Canada, Mexico, and Puerto
Rico should refer to Ditch Witch International Warranty Policy.
68
1030/1230 - WARRANTY
68
1030/1230 - WARRANTY
Products are warranted for 90 days from date of delivery of any new product. Free
replacement parts and labor will be provided at any authorized dealership for any
product which has a defect in material or workmanship within warranty period.
Replacement parts are warranted for 90 days from date of delivery of any such
replacement part. Any part of a product subject to ground contact is warranted
only for defects in material or workmanship and only for the period of operational
life of such part, which period shall not in any event exceed 90 days. Defects will
be determined by an inspection of the product or part by CMW or its authorized
dealer. The product or part must be presented to CMW or its authorized dealer for
inspection within 30 days of the date of failure. CMW will provide the location of its
inspection facilities or its nearest authorized dealer upon inquiry. CMW reserves
the right to supply remanufactured replacement parts as it deems appropriate.
Products are warranted for 90 days from date of delivery of any new product. Free
replacement parts and labor will be provided at any authorized dealership for any
product which has a defect in material or workmanship within warranty period.
Replacement parts are warranted for 90 days from date of delivery of any such
replacement part. Any part of a product subject to ground contact is warranted
only for defects in material or workmanship and only for the period of operational
life of such part, which period shall not in any event exceed 90 days. Defects will
be determined by an inspection of the product or part by CMW or its authorized
dealer. The product or part must be presented to CMW or its authorized dealer for
inspection within 30 days of the date of failure. CMW will provide the location of its
inspection facilities or its nearest authorized dealer upon inquiry. CMW reserves
the right to supply remanufactured replacement parts as it deems appropriate.
69
1030/1230 - WARRANTY
69
1030/1230 - WARRANTY
Exclusions
Exclusions
Specifically excluded from Major Component and Product Limited Warranty are:
Specifically excluded from Major Component and Product Limited Warranty are:
Parts subject to ground contact (including but not limited to drill pipe, downhole
Parts subject to ground contact (including but not limited to drill pipe, downhole
installation, alteration, neglect, or uses other than those for which products
All defects, damages, or injuries caused by improper training, operation, or
were intended.
recommendations.
manufacturers warranty).
recommendations.
were intended.
All implied warranties not expressly stated herein, including any warranty of
fitness for a particular purpose and merchantability.
Ditch Witch products have been tested to deliver acceptable performance in most
conditions. This does not imply they will deliver acceptable performance in all
conditions. Therefore, to assure suitability, products should be operated under
anticipated working conditions prior to purchase.
Ditch Witch products have been tested to deliver acceptable performance in most
conditions. This does not imply they will deliver acceptable performance in all
conditions. Therefore, to assure suitability, products should be operated under
anticipated working conditions prior to purchase.
This limited warranty applies to the owner of the product. Some states do not
allow exclusion or limitation of incidental or consequential damages, so above
limitation of exclusion may not apply. Further, some states do not allow exclusion
of or limitation of how long an implied warranty lasts, so the above limitation may
not apply. This limited warranty gives owner specific legal rights and the owner
may also have other rights which vary from state to state.
This limited warranty applies to the owner of the product. Some states do not
allow exclusion or limitation of incidental or consequential damages, so above
limitation of exclusion may not apply. Further, some states do not allow exclusion
of or limitation of how long an implied warranty lasts, so the above limitation may
not apply. This limited warranty gives owner specific legal rights and the owner
may also have other rights which vary from state to state.
70
1030/1230 - WARRANTY
70
1030/1230 - WARRANTY
For information regarding this limited warranty, contact CMWs Product Support
department, P.O. Box 66, Perry, OK 73077-0066, or contact your local Ditch Witch
dealer.
For information regarding this limited warranty, contact CMWs Product Support
department, P.O. Box 66, Perry, OK 73077-0066, or contact your local Ditch Witch
dealer.