Escolar Documentos
Profissional Documentos
Cultura Documentos
Note:
Do not base your design decisions solely on the data presented in this report. Use this information in conjunction
with experimental data and practical experience. Field testing is mandatory to validate your final design.
Simulation helps you reduce your time-to-market by reducing but not eliminating field tests.
Comments:
This is a bottle made of Nylon 101 made for ITCD 315.
Table of Contents
Table of Contents............................................................................................................. 2
List of Figures................................................................................................................. 2
Description.................................................................................................................... 3
Assumptions................................................................................................................... 3
Model Information........................................................................................................... 3
Study Properties.............................................................................................................. 3
Units............................................................................................................................ 4
Material Properties........................................................................................................... 4
Loads and Restraints......................................................................................................... 5
Connector Definitions....................................................................................................... 5
Contact......................................................................................................................... 5
Mesh Information............................................................................................................ 5
Sensor Results................................................................................................................ 6
Reaction Forces............................................................................................................... 6
Free-Body Forces............................................................................................................ 6
Bolt Forces.................................................................................................................... 6
Pin Forces...................................................................................................................... 7
Beams........................................................................................................................... 7
Study Results.................................................................................................................. 7
Conclusion..................................................................................................................... 9
List of Figures
BOTTLE-Study 1-Stress-Stress1.................................................................................. 8
BOTTLE-Study 1-Displacement-Displacement1..........................................................8
BOTTLE-Study 1-Strain-Strain1................................................................................... 9
Description
Summarize the FEM analysis on BOTTLE
Assumptions
Model Information
Document Name
Configuration
Document Path
Date Modified
BOTTLE
Default
E:\IET_301\LAB
8\BOTTLE.SLDPRT
Study Properties
Study name
Study 1
Analysis type
Static
Mesh Type:
Solid Mesh
Solver type
FFEPlus
Inplane Effect:
Off
Soft Spring:
Off
Inertial Relief:
Off
Thermal Effect:
Input Temperature
298.000000
Units
Kelvin
Off
Friction:
Off
Off
Off
Units
Unit system:
SI
Length/Displacement
mm
Temperature
Kelvin
Angular velocity
rad/s
Stress/Pressure
N/m^2
Material Properties
No.
Body Name
Material
Mass
Volume
SolidBody
1(Fillet1)
Nylon 101
0.141172 kg
0.000122758 m^3
Material name:
Nylon 101
Description:
Material Source:
Material Model Type:
Application Data:
Property Name
Value
Units
Value Type
Elastic modulus
1e+009
N/m^2
Constant
Poisson's ratio
0.3
NA
Constant
Mass density
1150
kg/m^3
Constant
Tensile strength
7.929e+007
N/m^2
Constant
Yield strength
6e+007
N/m^2
Constant
Thermal expansion
coefficient
1e-006
/Kelvin
Constant
Thermal conductivity
0.53
W/(m.K)
Constant
Specific heat
1500
J/(kg.K)
Constant
Selection set
Description
Fixed-1 <BOTTLE>
Load
Load name
Selection set
Loading type
Pressure-1 <BOTTLE>
on 4 Face(s) with
Pressure 5 psi along
direction normal to
selected face
Sequential Loading
Connector Definitions
No Connectors were defined
Contact
Contact state: Touching faces - Free
Mesh Information
Mesh Type:
Solid Mesh
Mesher Used:
Standard mesh
Automatic Transition:
Off
Smooth Surface:
On
Jacobian Check:
4 Points
Element Size:
0.24651 in
Description
Tolerance:
0.012325 in
Quality:
High
Number of elements:
8874
Number of nodes:
17752
00:00:06
Computer name:
LA241-16-88983
Sensor Results
No data available.
Reaction Forces
Selection set
Units
Sum X
Sum Y
Sum Z
Resultant
Entire Body
-0.0011958
-107.427
-0.000437498
107.427
Free-Body Forces
Selection set
Units
Sum X
Sum Y
Sum Z
Resultant
Entire Body
0.000248995
9.67314e-005
0.000150552
0.00030663
Free-body Moments
Selection set
Units
Sum X
Sum Y
Sum Z
Resultant
Entire Body
N-m
1e-033
Bolt Forces
No data available.
Pin Forces
No data available.
Beams
No data available.
Study Results
Default Results
Name
Type
Min
Location
Max
Location
Stress1
VON: von
Mises Stress
2744.26 N/m^2
(2.39278e-006
in,
2.08877e+006
N/m^2
(0.384316 in,
8.17504 in,
Node: 5680
Node: 17676
7.40869 in,
0.458732 in)
0.648404 in)
Displacement1
URES:
Resultant
Displacement
0 mm
(-0.204924 in,
0.111838 mm
(0.00782192 in,
Node: 7
8.14163 in,
Node: 2108
0.00440205 in,
0.562243 in)
Strain1
ESTRN:
Equivalent
Strain
2.37836e-006
Node: 17676
(2.39278e-006
in,
8.17504 in,
0.648404 in)
-0.0116555 in)
0.00181027
(0.384316 in,
Node: 5680
7.40869 in,
0.458732 in)
BOTTLE-Study 1-Stress-Stress1
BOTTLE-Study 1-Displacement-Displacement1
BOTTLE-Study 1-Strain-Strain1
Conclusion
Overall study was successful with given material.