The process of analysis is done in steps and the various steps done in this project till now are: 1. Planning - a detailed work plan for the analysis was developed. It includes software to use, 3-D model to make, dimensions of manifold etc.
The process of analysis is done in steps and the various steps done in this project till now are: 1. Planning - a detailed work plan for the analysis was developed. It includes software to use, 3-D model to make, dimensions of manifold etc.
The process of analysis is done in steps and the various steps done in this project till now are: 1. Planning - a detailed work plan for the analysis was developed. It includes software to use, 3-D model to make, dimensions of manifold etc.
The process of analysis is done in steps and the various steps
done in this project till now are: 1. Planning A detailed work plan for the analysis was developed. It includes software to use, 3-D model to make, dimensions of manifold etc. 2. Geometry The 3D design model of intake manifold is the geometry for the analysis process. It is imported in the Ansys workbench from SolidWorks (CAD software used in this project). 3. Meshing Mesh creation is the most important and time consuming process in the CFD analysis. Meshes are created such a way that to capture the air velocity stream coming in through the inlet of intake manifold and also to capture the air flow going out through outlet. Meshing is an important step because in meshing the geometry is divided into no. of elements and the computation is done on each and every part and then compiled to get the exact result. 4. Initialization In this step the meshing and other variables are checked and the boundary conditions are defined to the input variables. Also the equation and order of these equation are specified. No. of iteration, graphs, contours etc are set that we need to know the results of the problem.