Escolar Documentos
Profissional Documentos
Cultura Documentos
SPECIFICATIONS:
Digital
0.1 gram (3 kg
BEAM BALANCE
balance sensitive to
capacity)
SPECIFICATIONS:
50 kg. capacity
SPECIFICATIONS:
30 kg. capacity
SPECIFICATIONS:
Refer to ASTM D4318 soil lathe box wood hard rubber as
base 7.5 cm. Thick, 10 cm. Wide and 15 cm. Long brass cup with
attachment to the crank wooden stand for attachment to the
brass cup and crank.
SPECIFICATIONS:
Refer to ASTM C131
SPECIFICATIONS:
Voltage 220 volts, capacity 17 liters cube, range of
temperature 0-225 deg. Centigrade. Sensitivity 2 degrees
centigrade.
SPECIFICATIONS:
Sieve size to be used #200, #100,#50,#40,#20, and #10.
SPECIFICATIONS:
Sieve size to be used 2, 1 , 1 , , , 3/8 , ,
#8, and # 4 .
SPECIFICATIONS:
Non-breakable such as plastic rather than glass
FLEXURAL MOLD
SPECIFICATIONS:
6X6X21
VICUT APPARATUS
SPECIFICATIONS:
Refer to ASTM C91, C141 , 6- inches diameter by 12-inches
SLUMP CONE
SPECIFICATIONS:
ASTM C31, C143 plain metal sheet gage 26 with an inner
diameter of 10 cm. At the top and 20 cm. At the base and 30 cm.
High.
CYLINDRICAL MOLD
SPECIFICATIONS:
ASTM C31, C39, and C192 Metal pipe 15 cm inside diameter
by 30 cm long which can be split on one side with two quick
acting clamp welded to the mold to allow the removal of the
specimen.
SPECIFICATIONS:
Refer to ASTM C231
SPECIFICATIONS:
3 kg capacity
EVAPORATING DISH
SPECIFICATIONS:
Porcelain or glass with capacity of 140 ml , outside diameter
8cm. and height of 5 cm.
STOP WATCH
SPECIFICATIONS:
DIAL GAUGE
SPECIFICATIONS:
2.5 cm capacity with the least reading of 0.01 mm.
SOIL AUGER
SPECIFICATIONS:
Iwan type of soil sampler consisting of a steel bar with a
diameter of 2.5 cm. and a 120 cm. long with the Iwan sampler at
one of the end a cross bar at the end of the sampler.
SPECIFICATIONS:
Accurate to 1 second and at least 5 second least
reading.
SPECIFICATIONS:
Standard size metal shovel and spade.
TROWEL
SPECIFICATIONS:
Made of metal plate 0.625 cm. thick and 10 x 10cm. in size
attached to metal handle for gripping.
RUBBER PESTLE
SPECIFICATIONS:
Rubber tipped 3.75 cm. in diameter and 12.5 cm. length and a handle 7.5 cm
long.
RUBBER MALLET
SPECIFICATIONS:
Rubber head 6.5 cm in diameter and 12.5 cm long attached
to a 27.5 cm wooden handle.
SPECIFICATIONS:
Drop hammer 63.32 kg chain or rope attached to yoke of the
tripod split spoon sampler attached to a guide pipe which the
drop hammer is inserted tripod set consist of 3 G.I. pipe 7.5 cm
and 5 m long when assembled with a yoke at the end to support
the rope or chain for the use of the drop hammer. It is supported
at the middle by a bracing of angle bars.
Extra pipes needed when the depth to undergo the SPT
exceeds 6 meters pump, water container and water supply is
needed to make the penetration to the soil depth faster.
SPECIFICATIONS:
SPTM no. 4 mesh wire 0.65 cm. in size is used to
make a circular basket 20 cm. in diameter and 20 cm in height .
SPECIFICATIONS:
8 X 12 , 10 X 12 , 14 X 12 cylindrical pail.
PAIL
SPECIFICATIONS:
# 26 G.I. Sheet 5000 ml. capacity
PLASTIC PAIL
SPECIFICATIONS:
5000 ml. a capacity
SPECIFICATIONS:
ASTM F5 least reading 1 degree centigrade and a range of
30-150 degrees centigrade .
SPECIFICATIONS:
Plastic bottle with 300 ml or more capacity with a spray
attachment at one of the end of the bottle. Used plastic wash or
spray bottle can be used as a substitute .
SCOOP
SPECIFICATIONS:
Aluminum or stainless steel minimum diameter 11.4 cm. and
scoop bowel 5.3 cm. depth and length of scoop 15 cm. and overall
length of 25 cm.
STIRRING ROD
SPECIFICATIONS:
Glass rod 0.625cm. in diameter and 20 cm long.
BRISTLE BRUSH
SPECIFICATIONS:
Use for cleaning sieves, the width is 7 cm and is 15 cm long
wood handle 3.8 high and 12 cm long is attached to the brush.
WIRE BRUSH
SPECIFICATIONS:
The same dimension as bristle brush except wire rods is
used for cleaning the sample.
SPECIFICATIONS:
ASTM D 4318 glass plate 1.5 cm thick and 15 cm by 15 cm
square
MITER BOX
SPECIFICATIONS:
Steel plate box 4 cm. high and 4 cm. wide and a length of 6
cm. long plate with a 2.5 cm. semicircle grove at the center of the
box with a cutting edge at one of the ends for slicing soil sample.
SPECIFICATIONS:
Pan is made up of stainless steel or G.I. sheet 5 cm high and
30 cm in width and 50 cm in length.
SPECIFICATIONS:
Made of plastic or aluminum or glass with a capacity of 30 ml
filter depth of 3.5 cm and a height of 9 cm.
SPECIFICATIONS:
Knife shaped with wooden handle 0.50 cm thick, 3.75 cm
wide and 7.5 cm long with handle of 10 cm long.
METER STICK
SPECIFICATIONS:
Tape measure 300 cm to 400 cm long and retractable meter
stick 100 cm long aluminum metallic and ruler 30 cm long plastic
or metal.
SPECIFICATIONS:
Thin wall cylinder 0.1 cm thick and inner diameter equal to 5
cm and a height of 20 cm. One of the end is sharp so that it will
easily be able to penetrate the soil strata.
HACK SAW
SPECIFICATIONS:
Sharp enough to slice soil sample.
SOIL MECHANICS
INSTRUMENTS
SOIL MECHANICS
TOOLS