Escolar Documentos
Profissional Documentos
Cultura Documentos
E-Mail: info@rotorcomp.de
Page 1
User:
Gonzalo Fernandez
Project:
Note:
Ambient data
Atmospheric pressure:
Ambient temperature:
0.921 bar(a)
20
13.35
psi(a)
68
19.042 g/mol
0.976
0.998
1.275
0.03
bar(g)
Suction temperature:
30
Relative humidity:
60
0.5
86
psi(g)
F
0.07
bar
1.0
psi
0.14
bar
2.0
psi
Final pressure:
5.17
bar(g)
75.0
psi(g)
1.00
bar
14.5
psi
0.55
MCMD
0.27
kg/min
0.48
MSCMD
0.27
kg/min
0.53
MCMD
40
0.6
lb/min
0.6
lb/min
104
0.5
kW
0.5
BTU/s
0.2
kg/h
0.5
lb/h
Disclaimer of Warranty: Although this program was designed with utmost care, errors may occur during application. Therefore, only the data
in our technical data sheets shall apply. The utilisation of the program is at users risk. Rotorcomp Verdichter GmbH or further involved sub
supplier does not assume any form of liability in connection with the utilisation of the program.
E-Mail: info@rotorcomp.de
Page 2
EVO2-NK-Gas-V1
Drive:
Belt
4.12
4.12
(standard)
Driveshaft speed:
2750
rpm
2750
rpm
Gear ratio:
Tip speed (MRS):
m/s
74.3
2.1
kW
2.8
bhp
Specific power:
3.82
kW/MCMD
5.13
bhp/MCMD
Torque:
Nm
5.3
lb-ft
kg*cm
3.0
lb*in
Discharge temperature:
80
176
56
133
10
l/min
2.7
gal/min
kW
1.3
BTU/s
Volumetric efficiency:
Oil data
Oil volume flow:
Oil heat rejected:
Oil injection temperature:
Recommended oil viscosity class ISO VG:
Separator load:
1.4
75
168
ISO VG 100
52
Power consumption is based on an oil and operting temperature of at least 50 C. At colder operating
conditions the required power consumption can be much larger.
Disclaimer of Warranty: Although this program was designed with utmost care, errors may occur during application. Therefore, only the data
in our technical data sheets shall apply. The utilisation of the program is at users risk. Rotorcomp Verdichter GmbH or further involved sub
supplier does not assume any form of liability in connection with the utilisation of the program.
E-Mail: info@rotorcomp.de
Page 3
Curves of optimized type at standard conditions: EVO2-NK-Gas-V1; Vi=4.1; without gear box
Disclaimer of Warranty: Although this program was designed with utmost care, errors may occur during application. Therefore, only the data
in our technical data sheets shall apply. The utilisation of the program is at users risk. Rotorcomp Verdichter GmbH or further involved sub
supplier does not assume any form of liability in connection with the utilisation of the program.
E-Mail: info@rotorcomp.de
Page 4
Curves of optimized type at standard conditions: EVO2-NK-Gas-V1; Vi=4.1; without gear box
Disclaimer of Warranty: Although this program was designed with utmost care, errors may occur during application. Therefore, only the data
in our technical data sheets shall apply. The utilisation of the program is at users risk. Rotorcomp Verdichter GmbH or further involved sub
supplier does not assume any form of liability in connection with the utilisation of the program.