Você está na página 1de 1
BTEC 210 ~ Structural Theory Truss Design GIVEN: The steel truss profile shown below for a commercial office building. The loading on the roof consists of a DL = 78 PSF and a LL = 40 PSF. In addition, the steel members have the following allowable stresses + Allowable tensile stress = 21.6 KSI ‘+ Allowable compressive stress = 10 KSI 1. Determine the force in ALL of the members of the truss. Prepare a scale “summary sketch” clearly indicating the forces (in units of kips) and whether they are in Tension or Compression 2. Design the lightest weight members for all truss members using the allowable stresses as indicated above. Prepare a scale "summary sketch” clearly indicating the sizes used. Use the following + All top chord members shall be the same size equal-leg back-to-back double angles. + All bottom chord members shall be the same size equal-leg back-to-back double angles. + Alldiagonal interior members shall be the same size equal-leg single angles + All vertical interior members shall be the same size equal leg single angles. EQUAL | EQUAL |, EQUAL | EQUAL | EQUAL | EQUAL | | | i i CHORD MEMBERS. DIAGONAL INTERIOR MEMBERS VERTICAL INTERIOR_MEMBERS BOTTOM CHORD MEMBERS TRUSS SPACING = 0.c.

Você também pode gostar