Escolar Documentos
Profissional Documentos
Cultura Documentos
Assessment System
Time Remaining:
1Which BGP routers will become peers and share routing information?
BGP routers that are configured with the same network command
BGP routers share routing information with all routers in the same AS by default.
BGP routers that are configured with the neighbor command
BGP routers that are configured with the same peer command
Refer to the exhibit. BGP sessions are established between all routers. RTC receives route updates for network
209.165.200.224/27 from autonomous system 300 with the weight attribute set to 3000. RTB also learns about network
209.165.200.224/27 from autonomous system 200 with a weight of 2000. Which router will be used by RTA as a next hop
reach this network?
RTB because of the lowest weight
RTB because of the slow 64 kb/s link
RTB because of the shortest AS_Path
RTC because of the highest weight
RTC because of the longest AS_Path
RTC because of the T1 link
4
Refer to the exhibit. Router R2 is currently unable to access network 172.16.10.0/24. Based on the information in
the exhibit, which configuration would fix the problem?
R1(config)# router bgp 65100
R1(config-router)# network 10.0.0.0 mask 255.0.0.0
R1(config)# router bgp 65100
R1(config-router)# network 172.16.0.0 mask 255.255.0.0
R1(config)# router bgp 65100
R1(config-router)# no synchronization
R1(config)# router eigrp 1
R1(config-router)# no auto-summary
Refer to the exhibit. Which two configurations will allow router R1 to establish a neighbor relationship with router R2?
(Choose two.)
R1(config)# router bgp 100
R1(config-router)# network 192.168.20.0
R1(config)# router bgp 100
R1(config-router)# network 192.168.10.0
R1(config-router)# neighbor 209.165.200.226 remote-as 200
R1(config)# router bgp 200
R1(config-router)# network 192.168.20.0
R1(config-router)# neighbor 209.165.200.225 remote-as 100
R2(config)# router bgp 200
R2(config-router)# network 192.168.10.0
R2(config)# router bgp 200
R2(config-router)# network 192.168.10.0
R2(config-router)# neighbor 209.165.200.226 remote-as 200
R2(config)# router bgp 200
R2(config-router)# network 192.168.20.0
R2(config-router)# neighbor 209.165.200.225 remote-as 100
7 An enterprise must interconnect multiple sites. Which technology would provide secure and manageable
connections over the Layer 3 ISP network without the additional expense of leased lines?
IBGP
IP SLA
MPLS VPN
BGP dual-homed
BGP dual-multihomed
8 An enterprise has routers with limited resources but requires the best path to selected external networks. Which
multihoming option would provide the best solution?
multihoming with default routes from all providers
multihoming with full Internet routes from all providers
multihoming with default routes and partial Internet routes from all providers
multihoming with partial Internet routes from one provider and default routes from all other providers
9
Refer to the exhibit. An organization has configured a multihomed solution using EBGP between two edge
routers and two ISPs. The edge routers are receiving only default routes from each ISP EBGP peer. Which two
statements are true of this solution? (Choose two.)
EIGRP will choose the best route to exit the autonomous system.
Traffic between the ISPs will be routed through autonomous system 65500.
All routers in autonomous system 65500 must have complete knowledge of external routes.
A TCP session must be established between the edge routers and the ISP routers.
Full-mesh IBGP must be configured in autonomous system 65500 for internal hosts to reach the ISPs.
10
Refer to the exhibit. Autonomous system 65500 is routing traffic between two external BGP autonomous
systems, autonomous system 65200 and autonomous system 65100. Synchronization is disabled on BGP in
autonomous system 65500. Which routers should have IBGP peer relationships for routing between autonomous
system 65200 and autonomous system 65100 to work properly?
R1 and R5
R1, R3, and R4
R1, R3, R4, and R5
ISP A, R1, R5, and ISP B
11What is the range of autonomous system numbers reserved for private use?
1 to 32768
1 to 65535
32768 to 65535
64512 to 65535
65512 to 65535
12
Refer to the exhibit. BGP sessions are established between all routers. Router RTC has the local preference for network
209.165.200.224/27 set to 200 and router RTB has a local preference set to 150 for the same network. Which router will
by RTA as a next hop to reach network 209.165.299.224/27?
RTB because of the lowest local preference
RTB because of the slow 64 kb/s link
RTB because of the shortest AS_Path
RTC because of the highest local preference
RTC because of the longest AS_Path
RTC because of the T1 link
13
Refer to the exhibit. Router R1 is receiving the prefix 10.22.0.0/16 from an IBGP peer. The prefix appears in the
BGP table of R1, but not in the IP routing table. What could be preventing R1 from installing 10.22.0.0/16 in the
routing table?
automatic summarization disabled
EBGP multihop misconfiguration
incorrect use of the update-source command
route dampening
synchronization
Close Window
All contents copyright 1992-2010 Cisco Systems, Inc. Privacy Statement and Trademarks.
Close Window
Assessment System
Time Remaining:
16
Refer to the exhibit. Based on the show ip bgp summary and debug ip bgp output, which two statements must be true?
(Choose two.)
The router at 10.255.2.2 is an EBGP peer.
The ebgp multi-hop command is missing from the BGP configuration.
R1 has established an EBGP peering relationship.
R1 is directly connected to an IBGP peer.
R1 cannot route BGP packets to 10.255.2.2.
17Which BGP attribute is used by BGP to ensure a loop-free topology on the Internet?
Next_hop
As_path
local preference
Atomic aggregate
Origin
18
Refer to the exhibit. A network administrator in autonomous system 65100 has set up a dual-homed BGP
connection with an ISP. The administrator would like to ensure that all traffic from the ISP enters the
autonomous system through router R1. Which BGP attribute can the administrator configure on routers R1 and
R2 to accomplish this?
multi_exit_discriminator
local preference
aggregate
next-hop
weight
19 Which routes are available to a BGP speaker to advertise to peers once an adjacency is formed?
only routes in the IP routing table
only routes in the BGP forwarding database
only routes that are learned from IBGP peers in the same autonomous system
any route in either the IP routing table or BGP forwarding database
20 What is a disadvantage to multihoming and accepting only a default route from each ISP?
Because of load balancing between ISPs, suboptimal routing may occur.
Because routers will select the edge router based on the IGP metric, suboptimal routing may occur.
Because routing loops within the IGP routing domain may occur, only a single ISP connection can be used.
Because no more than one default route can be advertised into the IGP routing domain, only a single ISP
connection can be used.
Showing 2 of 2 <Prev 2 Next>
Page:
Close Window
All contents copyright 1992-2010 Cisco Systems, Inc. Privacy Statement and Trademarks.