Escolar Documentos
Profissional Documentos
Cultura Documentos
Control click on one of the layers with the letters to bring up its selection. Then go to
your channels menu and save the selection as a new channel. With the selection still
active do a series of Gaussian blurs starting at 16 then 8,4,2 and finally one.
Now go back to your layers palette, working on the top layer go to your lightening effects
(filters/render/lighting effects) I used the settings that you see on the right.
After the lightening effects your image will look like this. As you can see lighting effects
is a great tool in Photoshop, thanks Adobe.
You will notice that after the lightening effects the image looks a little rough. We can fix
that, just do a gaussian blur of 2 pixels over it to smooth it out. You may not notice a
Still working on the top layer, we are going to adjust the curves to start to give the image
its chrome look. Set your curves to the settings shown on the right. After you have
adjusted your curves your image will look like the one on the right. Which looks pretty
cool, but I like it better after the last step. The last thing to
do is add the plastic wrap. You can find the plastic wrap filter under filters/artistic/plastic
wrap. Set all the levels to their maximum.
That is all for this Photoshop tutorial folks. Any questions, comments or feedback please
Colorful 3D text
In this tutorial you will learn how to create this colorful 3D text effect:
Step 1
Create a blank document, size depends on the size of your text.
Step 2
Give your text some color and align it to your liking.
#bd64fa
#a8ed76
and
#fc9713
Step 3
Hit CTRL+T at every layer and rotate the letters a bit so it looks something like this:
Step 4
Right click your first text layer and choose Rasterize.
Select your 2d text layer and hit CTRL-E to merge it into the first layer.
Repeat until you only have one text layer (+background) left.
Step 5
With your text layer selected hold down ALT and press down and then left about 4 or 5
times.
Step 6
This is your layers palette right now:
Again, merge down until you are left with only two text layers:
Move your original text layer to the top:
Step 7
Select your copy text layer, hit CTRL-U and set it to something like this:
Merge the two text layers.
Drop Shadow
Inner Shadow
Color Overlay
-Now duplicate the text layer (right click on the layer->Duplicate layer),
-hide the top layer.
-select the bottom text layer as the working layer.
Now go to Layer->Merge Visible.
Now create a new Color Balance adjustment layer above this effects layer.
Double click on the color balance layer icon to adjust the colors.
Now just change the blending mode of the top layer. You might like 1 mode better than
the other. Here's what I set.
Blending mode: Overlay
This one I added a new layer with some Filter->Noise->Add Noise, then set the blending
mode to Darken.
Note: This only works in photoshop CS or later.
See below
To hide the paths so you can see your text better, press
CTRL+H.
DOWNLOAD PSD FILE
Use the type tool to create your text in white. Then CTRL+CLICK on your text layer to
make a selection of the text.
Press CTRL+D to reset your colors to black and white.
Now HIDE the original text layer so you only have the new clouds layer showing.
Now do the above again, this time Direction from the left.
Now CTRL+CLICK on the original text layer to load the original text's selection.(the one
that is hidden. just ctrl+click it, do not show it).
Then go to Select->Inverse
Now go to Filter->Stylize->wind
Method: Stagger. Direction: From the Right
Repeat the above step, but this time, direction: From the Left.
Now go to Filter->Distort->Twirl.
Set angle to around 350 (or any amount to your liking).
Another thing you can do is Show the original text layer and set its blending mode to
Exclusion, and move it on top of the effects layer.
Here is another version after adding some drop shadow to the effects layer:
Explosion
Blow up your text with a fiery background.
STEP 1
Start a new image and add your text, assuming white text on black background. Center
the text and make sure you have a decent margin around it.
STEP 2
Add some quick noise grunge by using the Mezzotint filter set at course dots.
Filter>Pixelate>Mezzotint... Accept that the layer will be rasterized. Apply the filter 2-5
times depending on how roughed up you want your text to look.
STEP 3
Lets add some depth now by punching the text using Filter>Distort>Pinch... I set the
amount to -50 to bring the text out. The distortion will depend on your image's aspect
ration (ration between width and height).
STEP 4
STEP 5
Apply a motion blur to the bottom two layers. One
at 45 and one at -45, each with 100 strength.
Merge the layers together. It should resemble
this...
Explosion Part 2
Blow up your text with a fiery background.
This is a multiple page tutorial because there are multiple layers, each adding to the
effect. Start on the first step.
STEP 6
Now apply a Gaussian Blur of about 3, then Filter>Stylize>Find Edges... The find edges
will emphasize the center area, essentially emphasizing the center explosion.
STEP 7
Now we'll use a levels adjustment layer
(Layer>New Adjustment Layer>Levels) to
bring out the basic shape and color of the
explosion. Put this layer above all layers.
STEP 8
Now unhide the text layer. Invert it and set its mode to Multiply.
Its up to you, but you can apply a slight Radial Blur, of about 10, to this text layer to
bring out the motion of the explosion on the text.
STEP 9
Unhide the lightthrough layer. Invert it and set its mode to Screen.
STEP 10
With the light through layer selected, apply a radial blur at full strength.
Filter>Blur>Radial Blur... Zoom mode at 100, best quality. Repeat the radial blur 2-5
times. Duplicate the layer to further pronounce the light through the holes of the text blast
effect.
And there you have it, the final version is easily cropped out. You may want to try
blurring the layer a little, though I like the sharp rays in this case.
Using the Type Tool, type a word in White. For the sake of this tutorial, I will use
Impact at Size 60pt with the text "N-sane ART"
Rasterize the layer ( Layer > Rasterize > Layer ) and name it "templight". Make sure
layer "templight" is activated on the Layer Palette.
Select All ( Select > All or Ctrl-A ).
Cut and Paste the selection and name the new layer "Light". This makes the text
perfectly centered.
Here comes the fun part! Activate layer "Light" on the Layer
Palette and use the Polar Coordinates Filter ( Filter > Distort > Polar Coordinates )
and choose Polar to Rectangular
This should create the distorted image you see to the left. Basically, Photoshop has just
changed the image's coordinate system from a rectangular one (x,y) to a polar one
(angle,distance).
Step 3 - Wind
Use the Wind Filter ( Filter > Stylize > Wind ) and choose Wind
for the method and From the right for the Direction. Press CTRL-F.
Now you need to create wind that is going the opposite direction. Do the same thing as
above except this time choose the option From the Left.
Rotate your canvas to the right ( Image > Rotate Canvas > 90 CW )
Use the Wind Filter ( Filter > Stylize > Wind ) and choose Wind
for the method and From the right for the Direction. Press CTRL-F.
Rotate your canvas to the left ( Image > Rotate Canvas > 90 CCW ) to return your image
to the proper orientation.
You are almost done! Use the Polar Coordinates Filter ( Filter
-> Distort -> Polar Coordinates ) and choose Rectangular to Polar.
Looks cool doesn't it? Now, Select the Text Tool and write the
text you first started with. Color it a different color such as Black and move it over the
white to create some contrast. You are done!
Step 5 - Color
One extra thing you can do is to add some color to your Light Blast Text. There are many
ways to do this. Our favorite way is to use overlays.
All you need to do is create a new layer above the blast layer, fill this new layer with
whatever color you want, and change it's blending mode to "Overlay"
In the image below, we filled the color layer with a radial gradient that went from red to
blue.
Glowing Plastic Text
This plastic text with a glow is what you are going to create:
Step 1
Create a blank document of the desired size. (This one is 360 x 250 pixel)
Type your text, right click it's layer and choose Rasterize Type.
Step 2
Apply Box Blur to the text (click Filter --> Blur --> Box Blur)
Step 4
Now Use Filter --> Brush Strokes --> Accented Edges.
It will look like this now:
Step 5
Hit CTRL-U and choose a color.. the values below will result in the blue of the example.
This is what you get:
Step 6
Now, if you want to remove the excessive glow above the text go to Image -->
Adjustments --> Levels and set it to this:
There's your final plastic text:
Tool make sure the brush color is black set the brush size to 2 Pixels.
Click on the Pen Tool using the setting below and draw the path shown.
With the Pen Tool selected right click on the selection, click Stroke Path.
After adding the Stroke Path With the Pen Tool selected right click on the selection and click Delete
Path.
Duplicate the String Layer, which should now be String Layer copy and move the layer under the text
layer. Therefore, the Text Should be sandwich in between the two string layers. Click over to the main
string layer and click on the Eraser Tool using the setting below.
Drop Shadow
Click ok, to add the setting.
Your image should look like the screenshot below.
Create a new layer, Layer New Layer , name it String Shadow Click on the Brush Tool make
sure the brush color is black set the brush size to 2 Pixels.
Click on the Pen Tool using the setting below and draw the path shown.
With the Pen Tool selected, right click on the selection click Stroke Path. After adding the Stroke
Path With the Pen Tool selected right click on the selection and click Delete Path.
At this point, your image should look like the screenshot below.
Finished:
Well that is it, hope it came out to what you expected. I also created a video tutorial for this example. The
file is a 12 MB flash file. I have the link up on the video section on the forums. Users have to register to
view the file, click here to register and view file. If you have any question or comment about this
tutorial, feel free to post a message on the forum.
Description:Here you will learn how to create multi layered text effect which you can
apply to both texts and other layers. A Great effect for logos, and signage.
Drop Shadow
Inner Shadow
Bevel and Emboss
Gradient Overlay
Inner Shadow
Bevel and Emboss
Gradient Overlay
Stroke
Also in this tutorial I am going to include the text styles used so you can apply them
easier and learn from them. I don't want this to be a bording tutorial where you have to
enter values into the bleding options so simple load up the styles and apply them where I
tell you to. Then experiment with them. Change the values and colors and learn from
them
The images for this tutorial are also saved with low quality so that they load faster so
they will not reflect your actualy results.
Now apply "Tutorial Text #1" to it. Right click the layer and go to Bleding Options to
have a look at what changes the Style has made. Experiment with the values. Ctrl click
the text layer. The layer should become slected. Now go to Select>Modify>Expand and
expand by 8 px or whatever you think suits the chosen font best. Make a new layer with
the selection still active. Then fill the selection with #8fb02f color. Experiment with the
color if you want. Keep in mind that the second layer style will appear differently
depending on what color you choose. Apply "Tutorial Text #2" to this layer. This is what
I have so far -
Duplicate Layer 2 (which is the layer you filled black). You can turn the layer styles
applied to it off by either deleting them by draging them to the bin or by hiding the eye
icon next to them.
Before:
After:
Then drag the layer down a bit to add a 3dish effect. You could alternatively continue
selecting and expanding the selection to make more strokes. This is what I have -
This is my final result after adding a bit -