Escolar Documentos
Profissional Documentos
Cultura Documentos
Which first
correctly identifies the number of paces and approximate number of feet which
will evenly space the guy anchors around the antenna?
2. When in proper sequence, the last three steps used to replace a defective
transmitter tube, in order, are labeled: (Refer to Figure 1)
H,J,C.
3. When in proper sequence the first three steps used to replace a defective
transmitter tube, in order, are labeled: (Refer to Figure 1)
1E,A,F.
5. In a 35-foot antenna system assembled for vertical polarization, the dipole will be
in what position with respect to the ground?
None in particular.
6. When correctly arranged, the first six steps of the receiver tuning procedure, in
order, are those steps labeled:
B,E,G,D,F,I.
7. When correctly arranged, the last six steps of the receiver tuning procedure, in
order, are those steps labeled:
I,A,J,C,H,K.
8. You have already sequenced the steps for tuning the transmitter. According to
your sequence, steps 7 through 14 are those steps labeled:
N,I,K,B,J,S,D,Q.
9. The final step of the transmitter tuning procedure is the step labeled:
T.
10. In the transmitter tuning procedure, the tuning step following tuning step R is
tuning step:
H.
11. Select the answer that identifies indicators and controls A, C, F, G, and H, in the
figure above, the Receiver RF Head. (Refer to Figure 11-1)
12. Controls B, D, E, and I in the above figure, the Receiver RF Head, are identified
as: (Refer to Figure 12-1)
13. Which list correctly identifies the parts labeled in the figure above of the
AN/GRC-103 antenna?
15. In a 12-channel PCM radio terminal, as in the figure above, which connection on
the AN/GRC-103 is connected to PCM OUT on the multiplexer? (Refer to Figure
3)
16. In a 12-channel PCM radio terminal, as in the above figure, the multiplexer is
connected to the receiver using the following connections: (Refer to Figure 3)
PCM IN to PCM and TMG IN to TMG.
17. Of the answers provided below, which one correctly identifies the components
labeled A, B, C, and D in the figure, 12-Channel PCM Radio System, above?
18. In the figure above, Antenna and Launcher Assembled for Vertical Polarization,
Height of 35 feet, the red guy lines are identified by letters:
B, C, and E.
19. Which list identifies items "A," "C," and "D" in the above figure, the Transmitter
RF Head? (Refer to Figure 19-1)
20. Identify controls B, E, and F in the above figure, the Transmitter RF Head. (Refer
to Figure 20-1)
21. The steps below are used to lower the mast section of a 35-foot antenna and
disassemble the launcher and antenna.
C,E,B,F,A,D.
22. In constructing a 35-foot antenna system how many mast sections are used?
7.
23. The names of the items identified by letters E, F, G, and H in the above figure are:
(Refer to Figure 5)
E-Azimuth Plate.
F-Jacking Lever.
G-Automatic Stop.
H-Launcher.
24. The names of the items identified by letters A, B, C, and D in the figure above
are: (Refer to Figure 5)
25. In a 35-foot antenna system the 6 guy wires are anchored to the ground by the use
of:
3 guy stakes.
26. When correctly sequenced, what is the correct order for the following steps which
are used to replace a defective indicator lamp on the front panel of Radio Set
AN/GRC-103?
C,A,D,B.
27. Which list correctly identifies items "A" through "E" in the above figure, the
Transmitter Fixed Head of Radio Set AN/GRC-103? (Refer to Figure 27-1)
A-Meter.
B-Meter Switch.
C-INPUT Control.
D-AC POWER Switch.
E-AC POWER Lamp.
28. Which list identifies items "F" through "I" in the above figure, the Transmitter
Fixed Head of Radio Set AN/GRC-103? (Refer to Figure 28-1)
29. Which answer identifies indicators and controls A through D in the above figure,
the Receiver Fixed Head? (Refer to Figure 29-1)
A-Meter.
B-Meter Switch.
C-AC POWER Switch.
D-AC POWER Lamp.
30. The correct names for controls and indicators E through H in the above figure, the
Receiver Fixed Head, are: (Refer to Figure 30-1)