Escolar Documentos
Profissional Documentos
Cultura Documentos
1. Where should you set the KYK-13 MODE switch when you are
connecting or disconnecting?
ON.
OFF/CK.
Position containing the TEK.
Z.
AM-7239.
AM-7238.
RT-1439.
AS-3684.
PA.
HI.
LO.
M.
1.
2.
3.
4.
LE/3.
SEnd/OFST.
FREQ.
Sto/ENT.
7. What battery will you install in the KY-57 to supply operate power to a
manpack configuration?
BA-1372.
BA-3030.
BA-4386.
BA-5590.
8. When you press the BATT/CALL button the display shows 11. This
indicates that you--
20 hours.
40 hours.
60 days.
180 days.
KYK-13.
RT-1439.
KY-57.
All of the above.
6.
4.
5.
7.
12. Where should you set the RT FCTN switch to clear all memory and
extend the life of the battery?
LD.
ZA.
OFF.
STW.
AN/PRC-119.
AN/VRC-87.
AN/VRC-92.
AN/VRC-91.
AN/VRC-46.
AN/PRC-77.
AN/VRC-43.
All of the above.
16. What will appear on the display when you press and release the FREQ
button with the CHAN switch in MAN?
-----
Sto/ENT
30000
Ed
17. Where should you set the FCTN switch on the RT to turn it in to
maintenance?
REM.
SQ OFF.
TST.
STW.
18. Where should you set the FCTN switch to load a frequency?
LD.
ON.
LD-V.
SQ.
19. You press the BATT/CALL button on your AN/PRC-119 and the
display show 05. How much battery life do you have left?
20. How long do you have to store a frequency once you have entered it
from the keyboard?
10 seconds.
5 seconds.
15 seconds.
7 seconds.
21. Where should you set the RT FCTN switch to shut down temporarily
and maintain memory?
OFF.
STW.
OFF/CK.
ZA.
23. How would you start the clock after entering the battery life condition?
Press BATT/CALL.
Press Sto/ENT
Press time.
Press start.
24. Where should you set the RT FCTN switch for normal secure single-
channel operation?
SQ ON.
REM.
ON.
SQ OFF.
25. To operate in the secure mode you must set the KY-57 MODE switch
to--
C.
LD.
RV.
P.