Escolar Documentos
Profissional Documentos
Cultura Documentos
Tork ialah momen daya yang dihasilkan pada benda yang bergerak pada paksinya, dalam hal ini ialah
crankshaft (aku xtau amende namanya, yang smbg kat rod tu), atau nama ringkasnya daya kilas;
Tork,T = r X F
τ is the torque vector and τ is the magnitude of the torque,
r is the displacement vector (a vector from the point from which torque is measured to the point
where force is applied), and r is the length (or magnitude) of the lever
arm vector,
F is the force vector, and F is the magnitude of the force,
x denotes the cross product,
Selain itu, Tork bole di derive :
T= F * d
T = Torque
F = Force (here, the force applied perpendicular to the axis)
d = Distance
Misalnya sebuah mesin yang mengandungi 90 milimeter (3.54 in) , dan 120 milimeter (4.72 in) stroke
mempunyai bore / stroke nilai dari:
90 mm / 120 mm = 0.75:1
credit to AsXdoX
Kalau bore jauh sgt dari stroke,xde masalah,lagi best.kalau stroke jauh dari bore tu yg menjadi
masalah.pasal characteristic tu,kita leh compare 125Z dgn RGV 120,satu square engine,satu oversquare
a.k.a short stroke.
memang short stroke,rpm lebih tinggi,utk 4-Stroke pun sama.sebab kalau 4-Stroke nak betul2 high
rpm,memang kena short stroke.contoh boleh tengok engine 4-Stroke yg high end,mcam Belang,FXR
semua short stroke,sebab nak main rpm tinggi,4-Stroke kalau nak capai power output yg tinggi,design
enjin kena betul dan high rpm.
kalau 2-Stroke pulak,engine square menjadi pilihan,sebab rpm takyah tinggi sgt,sampai >16k mcm 4-
Stroke.biasanya enjin 2-Stroke yg rpm tinggi,biasanya dipakai kat go-kart,sampai 19000rpm pun
ada.100cc pulak tu
credit to BarrySheene Jr.
----------------------------------------------------------------------------------------------------------------------------------
INFO-INFO BERGUNA
RXZ
stroker 2mm leh pakai blok saiz 2.00 @ 0.0 rxk.
maknanya,
stroker 1mm : blok standard rxz 0.0
stroker 1.5mm : blok saiz 1.00 rxz
stroker 2mm : blok saiz 2.00 rxz @ blok standard rxk.
credit to BikerBike