Você está na página 1de 1

AnTek Inc.

AN-0220 25VA Toroidal Transformers


www.antekinc.com

The 25VA toroidal transformers are commonly used


in the noise sensitive equipment or high end audio
products. They are specially designed to work on all
standard 115V or 230V at 50Hz or 60Hz. These
transformers have heavier gauge wires then the
normal requirement to avoid the copper lost during
the full power output. The dielectric test is more than
3500V in between primary and secondary coils.
Please see the test data for short circuit and open
circuit.
In most of the cases, this transformer can be output
20% more power from its rating at 60Hz power
source without any problem. This transformer comes
with 2 rubber pads and all mounting hardware.

RED GREEN

20V 12”
115V

BLACK BLUE

RED GREEN 1.6”

20V
115V

BLACK BLUE
3.0”

Weight = 1.3 LB

Open Circuit Test (core loss test): Voltage input Current input Power lost
TEST CONDITION: Apply variable voltage to primary coils (in 120V .01A 0.5W
parallel). Set voltages 120 and 140VAC at 60Hz. No load on secondary
coils. Measure the primary current and input power.
140V .01A 0.5W

Short Circuit Test (copper loss test): Voltage input Current rated Power lost
TEST CONDITION: Short all secondary coils, and apply variable 13.5V 0.21A 2.8W
voltage to (parallel) primary coils. Varies the voltage from 0-20VAC at
60Hz and freeze the voltage at rated primary current.

Load Test (operation test): Voltage output Current output Power output
TEST CONDITION: Input 120VAC 60Hz to the primary coils (in 20.1V 0.0A 0W
parallel), Output 1 and Output 2 in parallel to load, and measure voltage
19.6V 0.47A 8W
and current at different load levels.
18.6V 1.21A 20W

25 Ewing Ave. Tel: 201-991-3300


N. Arlington, NJ 07031 Fax: 201-955-2332

Você também pode gostar