Escolar Documentos
Profissional Documentos
Cultura Documentos
2. KIT CONTENTS
No. Part Name QTY
1 RIGHT CURVED TUBE ASSEMBLY 1
2 LEFT CURVED TUBE ASSEMBLY 1
3 CENTER TUBES 3
4 BOLT ON BRACKET 2
5 LONG SPACERS FOR BOLT ON BRACKET 2
6 SHORT SPACERS FOR BOLT ON BRACKET 2
7 PT SCREWS 6
8 WEDGES 6
9 M6 x 25 HEX HEAD BOLT 4
10 M6 FLAT WASHER 4
11 INSTALLATION INSTRUCTION 1
5
3
6
2 4
10
11
9
1
8 7
AMP-LS500 A005339INS
Date: 07/15/02
3. TOOLS REQUIRED Page: 2 of 4
Torque
Wrench T-20 and 10mm
T-30 Torx Wrench Rubber Drill
Wrench Mallet ½” (13mm)
Socket
Socket Drill Bit
4. MEANING OF CHARACTERS
Dispose Tightening
Remove Install Pull
torque
5. BRACKET INSTALLATION
1 2
T-30
Max 3” (76mm)
3 Long spacer
4
Bracket
M6 Hex
bolt and
T: 66 ± 15 in-lbs. washer
(7.5 ± 2 N-m). (X6)
Short spacer
NOTE: Long spacer goes on top, and short
spacer goes on bottom. Repeat steps 1 through 3 for the opposite side.
AMP-LS500 A005339INS
Date: 07/15/02
6. EXTENDER ASSEMBLY / INSTALLATION Page: 3 of 4
1 Width
Min. 3” (76mm) 44 3/32”
overlap (1120mm)
NOTE: Make sure there is a minimum of 3” (76mm) overlap between the center tubes and
the curved tubes.
Wedges (X6)
T-20
Tap with rubber mallet in the outward direction NOTE: Install wedges into wedge pockets
if need it. one complete upright at a time.
AMP-LS500 A005339INS
Date: 07/15/02
Page: 4 of 4
6 7
“Click”
(X2)
NOTE: Pull the tailgate release handle to NOTE: Depress the latch pin to disengage
disengage the tethers. the tethers.
AMP-LS500 A005339INS