CHRISTO·LUBE® Food Grade Lubricants
Lubrication Technology Inc. 7595 Gallia Pike
Franklin Furnace, OH 45629 Phone: (740}574-5150 Toll-free: (SOO) 477-S704
:b
Fax: (74O) 574-4740 ~
E-mail: sales@ubricationtechnology.com ~
..... 0'\ 7'0 s;
fY\
..
co en en
I
....... ....... N
REGISTERED In
~
o co
CHRISTO-LUBE® FOOD GRADE LUBRICANTS
Lubrication Technology, Inc. manufactures high technology synthetic lubricants based on perfluoropolyeth
CHRISTO·LUBE® Food Grade Lubricants
Lubrication Technology Inc. 7595 Gallia Pike
Franklin Furnace, OH 45629 Phone: (740}574-5150 Toll-free: (SOO) 477-S704
:b
Fax: (74O) 574-4740 ~
E-mail: sales@ubricationtechnology.com ~
..... 0'\ 7'0 s;
fY\
..
co en en
I
....... ....... N
REGISTERED In
~
o co
CHRISTO-LUBE® FOOD GRADE LUBRICANTS
Lubrication Technology, Inc. manufactures high technology synthetic lubricants based on perfluoropolyeth
Direitos autorais:
Attribution Non-Commercial (BY-NC)
Formatos disponíveis
Baixe no formato PDF, TXT ou leia online no Scribd
CHRISTO·LUBE® Food Grade Lubricants
Lubrication Technology Inc. 7595 Gallia Pike
Franklin Furnace, OH 45629 Phone: (740}574-5150 Toll-free: (SOO) 477-S704
:b
Fax: (74O) 574-4740 ~
E-mail: sales@ubricationtechnology.com ~
..... 0'\ 7'0 s;
fY\
..
co en en
I
....... ....... N
REGISTERED In
~
o co
CHRISTO-LUBE® FOOD GRADE LUBRICANTS
Lubrication Technology, Inc. manufactures high technology synthetic lubricants based on perfluoropolyeth
Direitos autorais:
Attribution Non-Commercial (BY-NC)
Formatos disponíveis
Baixe no formato PDF, TXT ou leia online no Scribd
CHRISTO-LUBE® Food Grade
Lubricants
Lubrication Technology Inc.
7595 Gallia Pike
Franklin Furnace, OH 45629
Phone: (740) 574-5150
Toll-free: (800) 477-8704
Fax: (740) 574-4740
E-mail: sales@lubricationtechnology.com
‘STVIISLYH SAY
Wer HAY RmR
REGISTERED
a
801S-Z22-998CHRISTO-LUBE®
FOOD GRADE LUBRICAN
Lubrication Technology, Inc. manufactures high technology synthetic lubricants based
on perfluoropolyethers, fluorinated polysiloxanes, esters, polyalphaolefins and synthetic
hydrocarbon cooligimers under the trade name CHRISTO-LUBE"”.
FOOD GRADE PRODUCTS
CHRISTO-LUBE® Food Grade Lubricants are certified by NSF (National
Sanitation Foundation) as an H-I lubricant. This certifies that the lubricants are
epted as a lubricant with incidental food contact (H1) for use in and around
food processing areas. The NSF Nonfood Compounds Registration Program is a
continuation of the USDA product approval and listing program, which is based
on meeting regulatory requirements including FDA 21 CFR.
CHRISTO-LUBE® Perfluoropolyether Lubricants are chemically inert,
oxygen compatible, non-migrating, odorless, non-toxic, non-flammable synthetic
greases. These materials operate over a wide temperature range and exhibit great
compatibility with plastics and/or elastomer seals. CHRISTO-LUBE® synthetic
lubricants can be custom formulated to meet specific customer demands.
>
&
CHRISTO-LURED Temperature Nia Certification =
Product RangeCF) 3
McG 110 10010 450 1 Hl 2
S
McG 111 -100 10 450 12 He B
MCG 111RP -100%0 450 2 HH
MCG 11RP-10 NIA Hel
McG 129 40 10 300 2 Hl .
MCG 152 200500 2 HA ig
MCG 1034 0%0450 NIA HH >
is
&
CHRISTO-LUBE® Synthetic Hydrocarbon Lubricants are multi-purpose =
greases designed for applications requiring food grade compatibility for use inor
around food processing equipment. CHRISTO-LUBE® synthetic hydrocarbon e
lubricants are suitable for use over a wide operating temperature range and are g
compatible with most elastomers and plastics
CURISTO-LUBE® Temperature NiGINe Ceriication 2
Product RangeCF) 3
q
McG 40s -$010 400 23 ha q
3
MCG 612 ~60 to 400 2 He &
S
3LUBRICATION TECHNOLOGY INC.
7595 Gallia Pike
Franklin Furnace, Ohio, USA 45629
Phone: 740-574-5150
Fax: 740-574-4740
CHRISTO-LUBE® MCG 110
CHRISTO-LUBE® MCG 110 is a wide temperature range, extreme pressure; anti-wear grease which was developed for use in
low-pressure systems where non-reactivity with chemicals, strong acids and oxidizers, fuels, solvents, etc. is an important factor
The grease is suitable for use in applications including valves, threads, screws, bearings and in systems employing elastomeric
and plastic seals, gaskets and o-rings. Although CHRISTO-LUBE® MCG 110 is very inert, newly exposed rubbing surfaces of
aluminum and magnesium may teact with the grease under certain extreme conditions,
PERFORMANCE TEST TEST METHOD CONDITION TYPICAL VALUE
Temperature Range “13°C 0232
NLGINo. °
Worked Penetration ASTM D-1403 60 strokes 355-285
Evaporation ASTM 12595 22 hrs, 208°C, max 10%
>
=
Oil Separation. FED-STD-791 30 hrs, 204°C, max 10.00% “
Method 321 =
m
z
Four-Ball Wear Test ASTM D266 1200 spm, 40k, 75°C, Ss
D100 stel, {hour &
0.92 mm
hours 130mm
Load Wear Index ASTM D-2596 4 .
=
i=
Low Temperature Torque ASTM D-1478 -54°C, Starting S75 gem >
60m, runing 300 g-em =
R
Copper Corrosion FED-STD-791 24 hrs, 100°C wb 5
Method 5309 a
FREE OF OZONE DEPLETION COMPOUNDS (ODO) iS
This information gives typical properties only and is not to be wsed for specification purposes. Lubrication Technology Inc. does not make any warranty, express dr
inp, or acept any Tabihy Te comcton wih ts Information ot ts uo. Labicaon Teetaclgy Ine. reciver the right to take addon, decors oF
tical to he information at any ne witout pier oticaion, For any healt hurd or environmental concerns, plese Fetes tethispodct terial sfety
Data Sheet
801S-Z22-998LUBRICATION TECHNOLOGY INC.
7595 Gallia Pike
Franklin Furnace, Ohio, USA 45629
Phone: 740-574-5150
Fax: 740-574-4740
CHRISTO-LUBE® MCG 111
CHRISTO-LUBE® MCG 111 is a wide temperature range, perfluoropolyether grease which was developed for use in systems
where non-reactivity with harsh chemicals including strong acids and oxidizers, fuels, solvents, ete. is an important factor. The
grease is suitable for use in applications including electrical contacts, valves, threads, screws, bearings and in systems employing,
elastomeric and plastic seals, gaskets and o-rings. Although CHRISTO-LUBE®MCG 111 is very inert, newly exposed rubbing
surfaces of aluminum and magnesium may react with the grease under certain extteme conditions, CHRISTO-LUBE® MCG
11 meets the specification requirements and has been qualified under Military Specification MIL-PRF-27617F, Types |, II, and
ML
PERFORMANCE TEST TEST METHOD CONDITION TYPICAL VALUE
Temperature Range ATVCF 023°C
NLGI No, 2
Worked Penetration ASTM D-1403 60 strokes, 265.295 ~
&
Evaporation ASTM D.2595 22 hrs, 204°C, max
port 22s, 208°C, g
R
Ot Separation FED-STD-791, Method 321 30s, 208°C, max 12.75% a
Four-Ball Wear Test ASTM D.2266 1200 epm, 40kg, 75°C, 1.00 mam
52100 seh, 1 hou
Dhours 150mm
ig
Low Temperature Torque ASTM D-1478 (@-54°C, Starting, max. 576 g-cm j=
60 min Running, max 300 g-em E>
iS
¥
Copper Corosion ASTM D-130 24 hrs, 100°C &
£
LOX Impact Sensitivity ASTM D.2512 20 Impacts No Reaction iE
fiom 1100 mm is
IF
Onidation Stability ASTM D492 LEC, 100 bs psi Drop
2
TREE OF OZONE DEPLETION COMPOUNDS (ODO) 3
tee we or speciation J, oes aot make ay waranty, expr
ar cee ay Tere oe she neh ty make hos, deletons of
‘modifications to te information a any tne
Data She
out prior notification, For any health hazard or environmental concer
plese refer to this products Material Sal@
801S:LUBRICATION TECHNOLOGY INC.
7595 Gallia Pike
Franklin Furnace, Ohio, USA 45629
Phone: 740-574-5150
Fax: 740-574-4740
CHRISTO-LUBE® MCG 111RP
CHRISTO-LUBE® MCG ILIRP is a wide temperature range, perfluoropolyether grease which was developed for use in systems
where non-reactivity with harsh chemicals including strong acids and oxidizers, fuels, solvents, etc. is an important factor. The
grease is suitable for use in applications including electrical contacts, valves, threads, screws, bearings and in systems employing.
clastomeric and plastic seals, gaskets and o-rings. Although CHRISTO-LUBE® MCG 11 IRP is very inert, newly exposed
rubbing surfaces of aluminum and magnesium may react with the grease under certain extreme conditions
PERFORMANCE TEST TEST METHOD CONDITION TYPICAL VALUE
‘Temperature Range 13°C 10 28PC
NLGINo 2
Worked Penetration ASTM D-1403 60 suokes 268.298
>
Evaporation ASTM D.2595 22s, 208°C,max 1.70% =
=
poration FED.STD-701, Method 321 301s, 204°C max_——_12.75% x
8
Ss
Four-Ball Wear Test ASTM D266 1200 rpm, 404g, 75°C, 1.00 mam z
2100 ech hour
Zhous ——1.50.mm
Low Temperature Tomue ASTM D-1478 @-54°C Stuting, max $76 g-em «
6omin Running. max 300 g-em if
le
Ee
Copper Comosion ASTM D.130 dais, 100°C rm s
LOX Impact Sensitivi ASTM D-2512 20 Impacts No Reaction, ie
From T100 mom IR
5
Oxidation Stability, ASTM D-492 121°C, 100 hrs O psi Drop
TREE OF OZONE DEPLETION COMPOUNDS (ODO) a
se pecans perpen Lanttae ekoolgy Ie deg hat abe ay warauy ep ru 6h
mation or is use. Lubrication Technology Ine. reserves the right to make additions, deletions 0
oat prior notification, Fer any health harard or environmental concerns, please refer to this products Material Safe
Data Sheet
801S-ZZ.LUBRICATION TECHNOLOGY INC.
7595 Gallia Pike
Franklin Furnace, Ohio, USA 45629
Phone: 740-574-5150
Fax: 740-574-4740
CHRISTO-LUBE® MCG 129
CHRISTO-LUBE® MCG 129 is a low to intermediate temperature range grease which was developed for use in mildly low-
pressure systems where non-reactivity with chemicals, strong acids and oxidizers, fuels, solvents, ete. is an important factor. The
grease is suitable for use in applications including electrical contacts, valves, threads, screws, bearings, and in systems employing
clastomeric and plastic scals, gaskets and o-rings. Although CHRISTO-LUBE® MCG 129 is very inert, newly exposed rubbing
surfaces of aluminum and magnesium may react with the grease under certain extreme conditio
PERFORMANCE TEST ST METHOD CONDITION TYPICAL VALUE
Temperature Range PCr0 149°C
NLGINo. 2
>
=
Worked Penetration ASTM D-1403, 60 strokes 265.295 =
3
a
z
Evaporation ASTM 12595 22s, 149°C, max 10.1% =
Oil Separation FED-STD-791, Method 321 30 hts, 149°C, max 3.0%
ie
=
Four-Ball Wear Test ASTM D-2266 1200 rpm, 40kg, 75°C, 0.80 mm. ie
$2100 steel, 1 hour >=
iS
R
Four-Ball EP, Weld Load ASTMD-2596 700k iF
R
LOX Impact Sensitivity ASTM D2512 20 Impacts No Reaction is
fiom 1100 mm iH
TREE OF OZONE DEPLETION COMPOUNDS (ODO)
Drpoes. Labriation Technology Ine, doesnt make ay warranty, expressg@
ake additions, deletions
please eter to this products Material Sat6B>
vdiicatins tothe information at any tine without prior notiieatlon. Fer any Reali, hard or environmental concer
Data Sheet.
80LS-ZLLLUBRICATION TECHNOLOGY INC.
7595 Gallia Pike
Franklin Furnace, Ohio, USA 45629
Phone: 740-574-5150
Fax: 740-574-4740
CHRISTO-LUBE® MCG 132
CHRISTO-LUBE® MCG 132 is a wide temperature range, perfluoropolyether grease which was developed for use in low=
pressure systems where non-reactivity with chemicals including strong acids and oxidizers, fuels, solvents, etc. is an important
factor. ‘The grease is suitable for use in applications including electrical contacts, gears, valves, screws, bearings, and in systems
employing clastomeric and plastic scals, gaskets, and o-rings. Although CHRISTO-LUBE® MCG 132 is very inert, newly
exposed rubbing surfaces of aluminum and magnesium may react with the grease under certain extreme conditions.
PERFORMANCE TEST TEST METHOD CONDITION TYPICAL VALUE
Temperature Range 29°C 10 260°C
NLGINo, 2
‘Worked Penetration ASTM D-1403 60 strokes 265-295
>
Evaporation ASTM D.2595 22 hs, 204°C, max 1.00% =
Copper Corrosion FED-STD-791, Method $309 24 hrs, 100°C la s
=
Oil Separation FED-STD-791, Method 321 30 hrs, 204°C, max 12.00% 2B
=
Low Temperature Torque ASTM D-1478 @-20°C, Starting, max .
6500 g-em
60:min Running, max
4875 gem
=
High Temperature Bearing ASTM D-3336 204°C, 10,000 rpm. 1000 hes = iE
Performance
PS
ES
iA
LOX Impact Sensitivity ASTM D.2512 20 Impacts No Reaction ¥
fom 1100 mn RR
FREE OF OZONE DEPLETION COMPOUNDS (ODO) RK
and is ot tobe wed for specification parposs. Lubrication Technology Inc docs not make any warranty, expres|.bF
ith ths Tnformaton ors ne. Lubrication Technology In. reserve the right to make additions, ‘ye
oat pir mlifeaton Far any Rea, hard or environmental concern please refer ta his product Material Salgy
801S-Z22-998LUBRICATION TECHNOLOGY INC.
7595 Gallia Pike
Franklin Furnace, Ohio, USA 45629
Phone: 740-574-5150
Fax: 740-574-4740
CHRISTO-LUBE® MCG 405
CHRISTO-LUBE® MCG 405 is a multi-purpose synthetic grease designed for the lubrication of ball, roller, needle and plain
bearings, gears and sliding surfaces in food processing equipment. ‘The grease is suitable for use over a very wide operating
temperature range. MCG 405 has been approved idental food contact by the United States Department of
Agriculture (USDA)
PERFORMAN ST METHOD CONDITION TYPICAL VALU
Temperature Range “°C 10 20"C
NLGINo. 23
Unworked Penetration ASTM D-1403 ase
Worked Penetration ASTM D-1403 69 stokes
Worked Stbility FED-S1D-791, 100,000 strokes
Meihod 313
Dropping Point ASTM D-2265 ae
Evaporation ASTM D.2595 Dh I7TPC max 44%
Oil Separation FED-STD-791, Method 321 30 hrs, 177°C, max 8.00%
Bomb Oxidation ASTM D942 Too hrs @ 100°C 1 psi drop ~
500 hrs @100PC 2psi drop z
Dint Count FED-STD-791, Method 3005-25-74 microns 1540 =
Over 75 microns ice 3
zm
R
Elastomer Compatibility FED-STD-791, Method 3603, “L” Stock, 168 brs, Ss
mc &
Four Ball Wear ASTM D266 1200 rpm, 40g, $2100 1.00 mm
steel, 75°C,
2hs
Load Wear Index ASTMD-2596 25°C so
Weld Ping, Load 250k if
le
E>
Rust Preventive Properties ASTMD.1743 sB hm @SEC A iS
¥
Low-Temperature Torque ASTM D-1478, 54°C, Starting iS
Running iS
R
High-Temperature Bearing ASTM 3336 10,000 pm, 17°C $00* hs min I
Performance 5
This intrmatinn avs Hp propeir oy awd ot Fe we Tor pesto pfposes Taatin Tchay T dos rma any wavany es
lumped or accept any lability in connection with this Information of ls use. Lubrication Technology Inc. reserves the right to make additions, deletions oF
‘modifications t the information at any time withot prior notification, For any health, hsrard or environmental concern, please refer te this product Material Safety
Data Sheet
801S-Z22-998LUBRICATION TECHNOLOGY INC.
7595 Gallia Pike
Franklin Furnace, Ohio, USA 45629
Phone: 740-574-5150
Fax: 740-574-4740
CHRISTO-LUBE® MCG 612
CHRISTO-LUBE® MCG 612 is characterized by exceptional mechanical stability, high dropping point, high load carrying
performance, reduced wear, and excellent resistance to water and corrosion. CHRISTO-LUBE® MCG 612 is a certified HI
grease for incidental food contact. It is designed for use in all food processing operations including mixing, stirring, baking,
frying, cooking, freezing, cleansing, packaging, canning and bottling
PERFORMANCE TEST ‘TEST METHOD. ‘CONDITION TYPICAL VALUE
Temperature Range “51°C 0 208°C
Thicker pe Cali Sato
Unwed Ponti sinus ase esas
Word Reston asmpany 60 sie
ion sok, %
chee >
z
Dron Pin asia. aise S
3
=
Foor al Wa asm pans osm 8
S
Oil Seperation % Loss ASTM DI742 -
:
Ras Prtesion asm pains E
5
is
R
e
‘modifications to the Information at any tne without prior wotfcaion, Fer any hea
Data Sheet
savard or environmental concerns, please refer to this products Material Salty
801S-Z22-998LUBRICATION TECHNOLOGY INC.
7595 Gallia Pike
Franklin Furnace, Ohio, USA 45629
Phone: 740-574-5150
Fax: 740-574-4740
CHRISTO-LUBE® MCG 1034
CHRISTO-LUBE® MCG 1034 oil is insoluble in most solvents, non-reactive with strong acids and alkalis, compatible with
plastics, elastomers and most metals, is non-toxic and has a wide operating temperature range. Because of its unique properties,
CHRISTO-LUBE® MCG 1034 can be used in environments of extreme corrosivity, oxidation, radiation, and low vapor
ressures where conventional oils would fail to function.
PERFORMANCE TEST TEST METHOD CONDITION TYPICAL VALUE
Temperature Range AIBC w23C
Specific Gravity, Mohr Westphal 20°C 1.92 g/ml
Viscosity ASTM D-445 2c 1850 est
4c 510 St
100°C a7
Viscosity Index ASTM D-2270 135
>
Pour Point ASTM D.9T -20°¢ &
=
Evaporition ASTM D-2595 2 hs @14erc 050% s
2 hrs (204 "% ay
22 his @204°C 1.20 3
Ss
Flash and Fire Point ASTM D-92 None =
Copper Comasi FED-STD-791 24 hrs. @100°C 1A
Method 5309
Four Ball Wear ASTM D266 1200 gpm, 75°C, 40k 120mm
52100 steel, | hr
Four Ball E.P. Weld Load ASTM D-2596 500 ke,
LOX Impact Sen:
ivity ASTM D212 20 Drops @43.3" No Renetion
FREE OF OZONE DEPLETION COMPOUNDS (ODO)
This information zives typical properties only and isnot tobe used for specification purposes. Lubrication Technology Ine. does not make any warranty, expres
Implied, or accept any Tabi n connection with this information or Ht wae. rieation Technolegy Ine. reserves the right #9 make additions, deletion
‘modifications to the information tau tne Without prior notification. For any health, hazard or euvironmental concer, please refer to this products Material Sa
Data She
Pe hy mam
801S-Z22-998