Escolar Documentos
Profissional Documentos
Cultura Documentos
1. The substation bus bar is made up of 2 in. round copper bars 20 ft. long What is the resistance of
each bar if resistivity is 1.724 X 10^-6 ohm-cm.
A. 7.21X10^-5 ohm
B. 13.8X10^-6 ohm
C. 5.185X10^-5 ohm
D. 2.96 X10 ^-5 ohm
2. Determine the resistance of a bus bar made of copper if the length is 10 meters long and the
cross section is a 4X 4 sq. cm. Use the 1.7241 micro ohm-cm.
A. 2.121X10^-4ohm
B. 4.312 X10^-4 ohm
C. 3.431 X10^-5 ohm
D. 1.078 X10 ^-4 ohm
3. Nichrome ribbon resistor elements each have a resistance of 1 ohm. The element is made from
sheet of nichrome alloy, 0.025 cm. thick .If the width of the ribbon is 0.3 cm., what length is
required per element? Assume specific resistance of nichrome to be 109 micro ohm-cm
A. 68.8 cm
B. 62.1 cm
C. 70.7 cm
D. 67.4 cm
4. A coil has 6000 turns of wire and a resistance of 380 ohms. The coil is rewound with the same
quantity (weight) of wire, but has 13,400 turns. How many ohms will the new coil have?
A. 1895 ohms
B. 1825 ohms
C. 1792 ohms
D. 1905 ohms
5. A conductor whose diameter is 0.175 in. has a resistance of 0.5 ohm. The wire is drawn through
a series of dies until its diameter is reduced to 0.08 in. Assuming the specific resistance of the
material remains constant what is the resistance of lengthened conductor?
A. 11.45 ohms
B. 10.22 ohms
C. 12.75 ohms
D. 10.82 ohms
6. The resistance of a copper wire at 30 ℃ is 50 ohms. If the temperature coefficient of copper at
0℃ is 0.00427, what is the resistance at 100 ℃?
A. 72.26 ohms
B. 54.25 ohms
C. 63.24 ohms
D. 58.15 ohms
7. The shunt field winding of shunt generator has a resistance of 80 ohms at 20 ℃. After several
hours of continuous operation, the winding temperature rises to 50 ℃. How much is the
winding resistance under this condition. Assume the resistance temp. coef. Of copper to be
0.004 ohm per degree at 0℃.