Escolar Documentos
Profissional Documentos
Cultura Documentos
C A T A L O G
N I N E T E E N
www.LittleMachineShop.com
(800) 981 9663
396 W Washington Blvd #500 • Pasadena CA 91103
Email: info@LittleMachineShop.com
Welcome to LittleMachineShop.com…
…the premier source of tooling, parts, and accessories for bench top machinists.
Machines Tooling
CNC milling machines Boring heads
Mini lathes Clamping kits
Mini mills Collet chucks and closers
Collets (MT, R8, 5C, 3C, ER)
Accessories Drill chucks
End mill holders
Ball turning attachments Knurlers
Coolant spray units Live & dead centers
Lathe chucks Mill quick change tooling
Milling attachments Thin parallels
Quick change tool posts Vises
Rotary tables
Tool post grinders Upgrades & Conversions
Measuring Air spring conversion kits
Bed extension kits
Coaxial centering indicators Belt drive conversion kits
Dial indicators Digital position readouts
Dial test indicators Mini mill power feed kits
Electronic digital calipers Tachometers
Laser edge and center finders Tailstock cam lock kits
Machinist’s levels Tweaks & Enhancements Kits
Magnetic bases
Plus
Cutting Tools
DVDs, videos, and books
Boring bars Model kits and plans
Center drills Spare parts kits
Cut-off blades Spindle head assemblies
End mills Starter kits
Indexable tools X-Y table assemblies
Tool bits Replacement parts
• Bench top lathes sold by LittleMachineShop.com, Grizzly Industrial, Harbor Freight Tools,
Homier, Micro-Mark, ToolsNow.com (Cummins), and others
• Bench top milling machines sold by LittleMachineShop.com, Grizzly Industrial, Harbor Freight
Tools, Homier, Micro-Mark, ToolsNow.com (Cummins), and others
• Blades for 4×6 Band Saws sold by Grizzly Industrial, Harbor Freight Tools, Homier, and others
Visit our Web site at www.littlemachineshop.com to see large, full-color pictures along with more
products and more information than we can fit in this catalog.
Besides the products shown in this catalog, we have virtually every replacement part for the mini
lathes, mini mills, and micro mills sold by LittleMachineShop.com, Grizzly Industrial, Micro-Mark,
Homier, Harbor Freight, and ToolsNow.com (Cummins). Visit our Web site at
www.LittleMachineShop.com to find the parts you need.
Check our Web site at www.littlemachineshop.com for current prices. Prices are subject to change
without notice. Sale prices in this catalog are valid for a limited time only.
Contents
CNC Machines Lathe
Accessories 14 10x21 Lathe (C6) Accessories 43
CNC Milling Machines 15 4x5 Micro Lathe (C0)/Unimat 43
Software 15 Accessories
7x10/12/14 Mini Lathe (C2/C3) 44
Collets and Chucks
Accessories
3C Collets 16
7x10/12/14 Mini Lathe (C2/C3) 47
5C Collets 16
Assemblies
Brown & Sharpe Collets 17
9x20 Lathe Accessories 48
ER Collets 17
Tool Post Grinders 48
Morse Taper Collets 18
Tooling 49
R8 Collets 19
Lathe Chucks
Taig Collets 19 Accessories 50
Coolant Systems Adapters 51
Coolants & Lubricants 20
Chucks 52
Flood Systems 20
Machines
Mist Systems 21 Lathes 53
Cutting Tools Mills 54
Boring Bars 22
Mill
Cut-Off Tools 22 Micro Mill (X1) Accessories 54
Drill Sets 23 Mini Mill (X2) Accessories 54
Drills 24 Mini Mill (X2) Assemblies 55
End Mills 24 Quick Change Tooling 56
Engraving Tools 25 Sherline/Taig Mill Accessories 58
Indexable Inserts 26 Small Mill (X3/SX3) Accessories 59
Reamers 26 Tooling 59
Rotary Broaches 27 Models
Saw Blades 28 Flywheels 62
Screw Extractors 29 Fully Assembled & Kits 62
Taps & Dies 29 Precision
Threading 31 Calipers 63
Turning Tools 31 Edge and Center Finders 66
DROs Layout 69
Displays 34 Measuring 74
DRO Packages 34 Sets 88
Scales 35 Setup 89
Kits Project Plans
Conversion Kits 35 Boats 91
Spare Parts Kits 39 Conversions 91
Starter Kits 40 Engines 91
Tools 92
QC Tool Posts
QCTP Sets 93
Rotary Tables
Rotary Tables 96
Tooling
Arbors and Sleeves 98
Clamping Kits 99
Drill Chucks 101
Tools & Things
Abrasives 102
Adhesives 103
Apparel 103
Coolants & Lubricants 103
Gift Certificates 104
Lights 104
Things 105
Threading Tools 105
Tools 108
X-Y Tables 111
Videos and Books
Books 111
Videos 112
Vises
Accessories 120
Milling Vises 120
Other Vises 121
Screwless Vises 122
3501 CNC Milling Machine
The LittleMachineShop.com model 3501 CNC Milling
Machine provides a complete CNC solution. It’s not
a conversion or adaptation; these machines are
designed and built by the factory as CNC machines.
Specifications
Includes Mach 3 CNC software license
End Milling Capacity 0.4" (10 mm)
Class 5 precision hardened and ground
Face Milling Capacity 0.8" (20 mm) ball screws
Drilling Capacity 0.4" (10 mm)
Direct drive NEMA 23 hybrid stepper
Table Size 15" × 5.38" motors
(384 mm × 137 mm)
Zero backlash jaw couplings
X- Axis Travel 10.2" (260 mm)
Y-Axis Travel 4.3" (110 mm) Three stepper drivers for X,Y, and Z axes
Z-Axis Travel 7.1" (180 mm) Extra stepper driver for 4th axis pre-
Throat 5.1" (130 mm) wired with external socket
X-axis & Y-axis motors NEMA 23 12 lb-in (1.35 Variable spindle speed under full CNC
Nm) torque control
Z-axis motor NEMA 23 19.5 lb-in (2.2 Synchronous belt spindle drive (no gears)
Nm) torque
Limit switches and homing on all three
Positioning Accuracy 0.0005" (0.01 mm) axes
Spindle Taper 2 Morse taper
Parallel interface board optically isolates
Spindle Motor 0.67 hp (500 W) the machine from the computer
brushless DC
Emergency e-stop switch and chuck guard
Spindle Speed 100–7000 RPM
switch
Power Requirements 120 V 60 Hz 6.3 Amps
CE marking (comparable to UL listing)
Machine Weight 190 lb (86.4 kg)
CNC controlled coolant pump receptacle
Overall Dimensions 24.8" × 24.8" × 24.8"
(W × D × H) (630 mm × 630 mm × $3,495.00
630 mm)
Options
3789 Pentium 4 Computer includes the computer, a 17" flat screen
monitor, plus keyboard and mouse. It comes with a fully licensed copy
of Dolphin CAD/CAM. $895.00
3519 4th Axis Rotary Table The 4th axis rotary table plugs right into
the model 3501 CNC Milling Machine, which includes the 4th axis
driver. The rotary table is 4" in diameter, has a rotational accuracy of 5
seconds and backlash less than 0.002" (0.05 mm) adjustable to less
than 0.0005" (0.01 mm) $750.00
4100 HiTorque 7x12 Mini Lathe
The LittleMachineShop.com HiTorque Mini Lathe is the best in its class. It has the most power, most
torque, and a longer center distance than competitors’ lathes.
The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the
speed from 50 RPM to 2500 RPM continuously in both directions. There are no gears to shift.
The cross feed and compound rest dials are graduated in 0.001" and 0.025 mm. The lathe is equipped
with a 4-way indexing tool post set for 5/15" (8 mm) tools.
Real top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability.
You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per
inch, and you can create every American Standard Metric class 6h thread from 0.3 to 8 mm pitch with
the extra 21 tooth change gear that is included. $639.95
500 Watt output spindle motor Swing Over Bed 7" (180 mm)
No gears in spindle drive Swing Over Saddle 4.3" (110 mm)
E-stop safety power switch Distance Between 12.2" (310 mm)
Centers
Extended threading capability - inch and
Spindle Through Hole 0.8" (20 mm)
metric threads
Spindle Motor Output 0.7 hp (500
Rear apron shield to keep swarf out of the Watts)
mechanism
Range of Threads 4-80 TPI (0.3-8
Cam lock tailstock mm)
Four-way tool post Spindle Taper #3 Morse taper
The HiTorque Mini Mill has drill press handles for drilling
and fast motion of the mill's head. It also has Z-axis fine
feed with 0.001" resolution for milling operations.
Value packs offer tremendous savings over buying individual items. Get everything you need to
get started using your benchtop lathe or milling machine.
Starter Kits get you some basics to help get you going.
Tooling Packages provide everything you need to start making chips with your lathe or milling
machine.
Part no. Product Price Page
1259 Measurement Starter Kit with Dial Caliper $29.95 88
1260 Measurement Starter Kit with Digital Caliper $39.95 88
3766 Milling Attachment Package, Mini Lathe $184.95 46
3825 QC Turning Tool holder, A2Z CNC, Pack of 4 $67.00 93
1931 Rotary Table, 4" with Tailstock & Dividing Plate $349.95 96
2183 Rotary Table, 4" with Tailstock & Dividing Plate $239.95 97
3131 Rotary Table, 4" with Tailstock, Dividing Plate, & 3-Jaw Lathe $299.95 97
Chuck
3791 Rotary Table, 4" with Tailstock, Dividing Plate, & 3-Jaw Lathe $429.95 96
Chuck
3132 Rotary Table, 4" with Tailstock, Dividing Plate, & 4-Jaw Lathe $289.95 97
Chuck
3792 Rotary Table, 4" with Tailstock, Dividing Plate, & 4-Jaw Lathe $414.95 96
Chuck
2329 Rotary Table, 6" with Tailstock & Dividing Plate $399.95 98
1796 Starter Kit, Lathe (3/8" Tool Bits) $25.95 40
2653 Starter Kit, Micro Mill $78.95 40
1261 Starter Kit, Mini Lathe (5/16" Tool Bits) $22.95 40
1262 Starter Kit, Mini Mill $79.95 40
3491 Tooling Package, 2MT Micro Mill $229.95 40
3869 Tooling Package, 3501 CNC Mill $229.95 41
3490 Tooling Package, 3MT Mini Mill $299.95 42
3534 Tooling Package, 8x12, 8x14 Lathe $159.95 41
3786 Tooling Package, 9x20 Lathe $224.95 42
3514 Tooling Package, Atlas/Craftsman 6" Lathe $159.95 41
3486 Tooling Package, Mini Lathe $159.95 41
3489 Tooling Package, R8 Mini Mill $273.95 42
3527 Tooling Package, Small Lathe $219.95 42
3526 Tooling Package, X3 Mill $299.95 43
Rotary Tables
We carry a full range of small rotary tables. Dividing plate sets are available for all of our rotary tables
if you want to do indexing. We also have tailstocks for all the rotary tables.
See details about rotary tables beginning on page 96 and on page 124.
A2Z CNC Quick Change Tool Post Sets
This Quick Change Tool Post set works with many small lathes.
The tool post set includes 2 turning holders, a boring bar holder, and a cut-off tool holder. The turning
tool holders accept tools up to 3/8" square. The boring bar holder takes boring bars with a 3/8" round
shank. The cut-off tool holder uses 1/2" tall cut-off blades.
Mounting kits are available for 7×10, 7×12, and 7×14 mini lathes, Sherline, Taig, Prazi, Emco, Unimat,
and Atlas 6" lathes. A2Z CNC tool holders fit TS Engineering and Phase II Hobby tool posts.
See the complete line of quick change tool post sets on pages 93–96.
CNC Machines: Accessories
3519 4th Axis Rotary Table for CNC $750.00
● Includes stepper motor
● Includes tailstock
● Includes adapter to mount a 3" lathe chuck
● Includes hold down clamps to mount the rotary table on 3501 and 3503 CNC Mills.
The 4th axis rotary table plugs right into the model 3501 and 3503 CNC Milling Machine, which
includes the 4th axis driver.
Diameter - 4"
Capacity - 5 kg
Maximum Torque with 1.35 N/m motor - 54 N/m
Thru Hole - 12mm
Horizontal - Yes
Vertical - Yes
Vertical Center Height - 2.68"
Ratio - 40 to 1
Net Weight - 12kgs
Rotational Accuracy - 5 seconds
Backlash - Less than 0.05 mm, and within 0.01 mm after adjustment
Repeatability - 0.01 mm
T-Slot Size - 8mm
3429 4th Axis Rotary Table for CNC, No Stepper Motor $600.00
2827 Drill Set, 115 Piece Screw Machine Length HSS $224.95
● Made in USA
● Surface treated black finish
● Heavy duty 135º split point
115 Piece high speed steel drill set.
Set includes 1/16" - 1/2" by 64ths, A - Z, and No. 1 - 60.
These are screw machine length drills with straight shanks. Screw machine length drills are 5/8 as
long as normal jobber-length drills. These shorter drill bits are useful on mini lathes and mini mills
where there isn't much distance for tools.
Includes a Huot metal index for storing the drills.
2829 Drill Set, 29 Piece Jobber Length HSS $85.95
2830 Drill Set, 29 Piece Screw Machine Length HSS $74.95
Inserts, Carbide
Carbide inserts.
These inserts fit our indexable tools.
3601 Tap & Die Set, 39-Piece Solid Round Dies $121.95
● 39-piece machine screw & fractional tap and solid round die set
● Machine screw and fractional sizes of plug style taps plus 1" solid round dies
● Includes three tap handles and two die stocks
● 18-leaf standard thread pitch gauge and screwdriver
● Plastic case with lift-out tray
This USA-made Hansen brand 39 PC set can be used to create new threads.
The Hanson 39-Piece Machine Screw / Fractional Tap and Solid Round Die Set includes machine
screw taps, fractional plug style taps, plus 1-inch solid round dies. A adjustable guide diestock for
cutting external threads on metal cylinders is included, as well as a adjustable handle tap wrench
to create internal screw threads, and a T-handle tap wrench. There's also an 18-leaf standard
thread pitch gauge, a screwdriver, and a handy plastic case to keep everything organized.
39-pc set in plastic case includes the following items:
Machine Screw Plug Tap and 1" Solid Round Dies in sizes: 4 - 40 NC, 6 - 32 NC, 8 - 32 NC, 10 - 24 NC,
10 - 32 NF, 12 - 24 NC
Fractional Plug Tap and 1" Solid Round Dies in sizes: 1/4" - 20 NC, 1/4" - 28 NF, 5/16" - 18 NC,
5/16" - 24 NF, 3/8" - 16 NC, 3/8" - 24 NF, 7/16" - 14 NC, 7/16" - 20 NF, 1/2" - 13 NC, 1/2" - 20 NF
Pipe Thread Plug Tap and 1" Solid Round Dies in sizes: 1/8" - 27 NPT
Threading Tools: Adjustable Die Stock - 1" Dies, T-Handle Wrench - Taps No. 0 to 1/4", Adj. Handle
Tap Wrench - Taps No. 0 to 1/2", 18 Leaf Standard Thread Pitch Gauge, Empty Plastic Case
3694 Turning and Boring Tools, 3/8" Indexable HSS Inserts $130.00
● Right and left hand turning tools with 0.375" shank 3.5" long
● Boring bar with 0.375" shank 5.0" overall length
● Includes three T-15 High Speed Steel CCMW-2-1.5-1 inserts for turning
● Includes two T-15 High Speed Steel CEMW-2-1.5-1 inserts for boring
● Includes two MS-1152S screws, four MS-1153 screws and one T-7 wrench
This A R Warner kit includes a 3/8" right-hand turning tool, a 3/8" left-hand turning tool, and a
3/8" boring bar.
The r ight hand turning bar has a 0.375” shank, and is 3.50” in overall length.
The left hand turning bar has a 0.375” shank, and is 3.50” in overall length. The left hand turning
bar has a second insert pocket in opposite end that provides a 50° side cutting edge angle. This
provides a way to use the two insert points that are not used in the other tool holders.
The boring bar has a 0.375” shank, and is 5.0” in overall length. It has 0.188" flat along length for
location, and requires a 0.365" minimum bore.
DROs: Displays
1990 Cable, DRO Mini-DIN $13.95
● These cables connect the inexpensive imported DRO scales to a display unit
● 4-pin mini-DIN connector on one end
● Proprietary 4-pin rectangular connector on other end
● Cable length is 2 meters (78 inches)
3483 Cable, DRO RJ-11 $13.95
DROs: Scales
2014 DRO Scale 12" (300 mm) $85.00
● Digital scale unit has a range of 0-12" (0-300mm)
● Includes two mounting brackets
● Resolution is 0.0005" (0.01mm) and the accuracy is 0.001" (0.03 mm)
● Data output jack works with our digital display units
● One SR 44 1.5V battery is included
The scale cross section is 16 mm x 4 mm. The scale is 420 mm long. With the mounting brackets
installed, it is 445 mm long overall.
This scale is the correct length for the X- and Z--axis on the mini mill as well as the carriage
motion on 7x10 and 7x12 mini lathes.
2015 DRO Scale 16" (400 mm) CLOSEOUT SALE $88.00
3091 DRO Scale 20" (500 mm) $160.00
2012 DRO Scale 4" (100 mm) $49.00
2013 DRO Scale 8" (200 mm) $69.00
2909 Metal Gear Kit for Mini Lathe & Mini Mill $71.60
● Replaces plastic spindle gears with metal gears
● Fits mini lathes and 3MT mini mills
● Includes installation tools
Once this kit is installed on your mini lathe or mini mill, you will no longer have to worry about
breaking the hard-to-replace gears on the spindle.
3448 Metal Transmission Gear Kit, Mini Lathe & 3MT Mini Mill $39.95
● Replaces both plastic transmission gears with metal
● Fits mini lathes and 3MT mini mills
Once this kit of steel gears is installed on your mini lathe or mini mill, you will no longer have to
worry about breaking the hard-to-replace gears inside the headstock.
On the mini lathe, the belt drive ensures that expensive parts don't break from overloads.
On the mini mill, the easy-to-replace intermediate gear on top of the headstock is still plastic.
This helps to ensure that you don't break expensive and hard to replace parts.
3451 Gear, 2-Speed Intermediate Shaft Metal $19.95
3453 Gear, 2-Speed Spindle Metal $22.95
3452 Gear, Intermediate Metal $11.95
3456 Gear, Spindle (2) Metal $15.95
3449 Metal Transmission Gear Kit, R8 Mini Mill $39.95
2949 Wood Turning Tool Rest and Center, Unimat 3 & 4, SIEG C0 Lathes $31.95
● Wood turning tool rest and spur center
● 150 mm long tool rest
● Includes spur center with 10 mm shank
● Fits Unimat 3 & 4 lathes
● Fits SIEG C0 lathes
If this product is out of stock, you may want to try our part number 2418 Steady Rest, Ball Bearing
as a substitute! It is the same Steady Rest just with the added ball bearing feature.
2858 Steady Rest, 8x12, 8x14 Lathes $51.95
3398 Steady Rest, C4 Lathe $53.95
2496 Steady Rest, C6 Lathes $53.95
1685 Wood Turning Tool Rest and Center, Mini Lathe $35.95
The tool rest clamps in the standard tool post so you can turn wood on your mini lathe.
The driving center fits in the lathe spindle.
Machines: Lathes
4100 HiTorque 7x12 Mini Lathe $639.95
● Most powerful lathe in its class
● Most low-speed torque in its class
● No gears in spindle drive
● Cam lock tailstock
The LittleMachineShop.com HiTorque Mini Lathe is the best in its class. It has the most power,
most torque, and a longer center distance than other lathes in its class.
The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary
the speed from 50 RPM to 2500 RPM continuously in both directions. There are no gears to shift.
The cross feed and compound rest dials are graduated in 0.001" and 0.025 mm. The lathe is
equipped with a 4-way indexing tool post set for 5/16" (8 mm) tools.
Real top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading
capability. You can create every American Standard Unified class 2A inch screw thread from 4 to
80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.3
to 8 mm pitch with the extra 21 tooth change gear that is included.
The lathe includes a chip tray, a backsplash guard, and spreaders to give the feet a broader stance.
The LitleMachineShop.com model 4100 HiTorque Mini Lathe is a version of the SIEG SC2.
3107 Tuff Nuts T-Slot Nuts for Mini Mill (8 pieces) $16.75
● 10-32 thread
● Set of 8 T-slot nuts
● Fits 12 mm T-slot on Mini Mill
● Steel T-nut with black oxide finish
● Lifetime Warranty
Mill: Tooling
1626 Boring Head Shank R8 $19.95
This boring head shank has an R8 taper on one end and a 7/8 - 20 thread on the other.
The boring head shank adapts our boring head to mills with an R8 spindle.
Precision: Calipers
1707 Battery, LR44 Alkaline $0.95
These LR44 alkaline batteries fit most electronic digital calipers.
11.6 mm diameter, 5.4 mm thick.
1.50 volts (nominal), 105 mAh.
These batteries interchange with AG13, D357, 357, A76, LR44W, CX44, SR44.
2975 Batteries (10), LR44 Alkaline $5.95
2976 Battery, SR44 Silver Oxide $2.49
3966 Edge and Center Finder, Laser 3/8" Shank Concentric Circles $157.50
● 3/8" shank fits collets and end mill holders
● 3.375" overall length
● Uses common SR44 batteries (included)
● Accuracy to 0.001"
● Includes polarizing attachment to adjust line width
The Laser Center/Edge Finder™ is a tool for your mill that saves setup time. It eliminates the
frustrations and doubts of using the century-old indirect method with a conventional edge finder
or wiggler.
This Laser Center/Edge Finder projects a series of concentric rings, making it easy to center over
an existing hole. See the pattern on the Chris' Tips tab.
The Laser Center/Edge Finder projects a fine laser beam that directly indicates the edge of the
workpiece. Move the beam to the edge of the work and set your dial to zero. It is that easy. No
more calculating half the diameter of the edge finder.
You can also use the Laser Center/Edge Finder to locate scribed or center-punched locations.
Simply move the laser beam to the location on the workpiece and the spindle is aligned.
The Laser Center/Edge Finder is easy to align so you can be sure it is always accurate.
The batteries last for over 3 hours of continuous operation. That's 6 months to a year of normal use.
Precision: Layout
1250 Combination Square Set, 12" $36.95
● 12" combination square set
● Includes square head, center head, and protractor head
● Stainless steel blade with graduations of 8ths, 16ths, 32nds, and 64ths
This 4-Piece combination square set features a stainless steel blade, and includes a square head, a
center head, and a protractor.
Precision: Measuring
3103 Angle Gage Set $21.95
● Set of 18 angle gages
● 5° to 90° by 5° increments
● Satin chrome finish
● Eight gaging surfaces on each gage
● Check primary angle, 1/2 primary and complementary angles
The angle gage set is furnished in a vinyl case for storage.
3547 Depth Gage, Starrett Steel Rule 0-6" Range, 32nds/64ths $44.50
● Starrett steel rule depth gage, 0-6" range, 32nds/64ths
● Starrett catalog number 237
These very handy depth gages can be used to quickly obtain measurements in 64th of an inch by
simply adjusting the rule to the required depth.
The gage consists of a nicely finished, hardened steel head and an accurate, machine divided,
tempered steel rule. The rule is Starrett No. 610N.
The gage can be smoothly adjusted to the required measurement and then locked into position by
a knurled nut
The base is cut out on one side, adjacent to the rule, permitting easier readings and more
accurate measurements
3548 Dial Test Indicator, Starrett With Dovetail Mount, 0-5-0 x 0.0001" $253.00
● Starrett dial test indicator with dovetail mount
● Starrett catalog number 708AZ
● Dial test indicator with 0.0001" graduations
● Range is 0.010"
These precision test indicators were designed to be positioned for easy and accurate readability.
The versatility of the angled head, combined with the three dovetail mounts eliminates the need
for having both vertical and horizontal style test indicators. These are the features that make this
series of test indicators superior to ordinary types.
Angled head for better reading position
Large 1 3/8" (35mm) dial diameter
Precision gear-driven design with smooth, jeweled movement
Meet or exceed ISO accuracy specification
For extreme accuracy we recommend positioning the lever contact so that it is approximately 15°
from being horizontal with the workpiece.
Three dovetail positioning mounts work with existing test indicator accessories
Inch reading indicators are available with easy-to-read, shaded white, solid red, or solid black
dials - millimeter reading indicators with solid yellow dials
Contact point reverses automatically, always maintaining clockwise hand rotation
Narrow body for inreach ability
Satin chrome finish for durability
Long carbide contacts 13/16" (20mm) are furnished as standard.
Contacts are frictionally adjustable and replaceable
The gage has a black matte finish with information steel stamped on one side and white marked on
the reverse side for quick, clear reading. The gage is thoroughly tested for accuracy after
hardening. Approximate size, 5/64" thick by 2 5/16" wide by 6 1/4" long.
3073 Electronic Indicator, Electronic Caliper, and Magnetic Base Set $89.50
● 0-1" Electronic digital Indicator, 0.001" resolution, 0.001" accuracy
● 0-6" Electronic digital caliper, 0.0005" resolution, 0.001" accuracy
● Magnetic base with fine adjustment
● Includes fitted case
● PEC Tools brand
There are three buttons on the indicator and caliper; ON/OFF for power, ZERO to zero the display,
and INCH/MM to switch between display of inches and mm.
3790 Sensitive Drill Feed and 1/8" (3 mm) Keyless Drill Chuck $99.95
● Fingertip control for drilling small holes
● Helps prevent drill breakage
● 0JT taper, 1/2" straight shank, 3/4" travel
● 1/8" ( 3 mm) capacity keyless drill chuck
To use the sensitive drill feed, grasp the knurled ring and pull it down to feed the drill into the
workpiece. The internal spring retracts the drill when the ring is released.
No chuck key is required with this self-tightening design. The chuck is made from hardened tool
steel to ensure accuracy and extended life.
The rated capacity is of the drill chuck is 0 to 3 mm. It has a number 0 Jacobs taper mount and
0.002" (0.05 mm) maximum runout.
3665 Sensitive Drill Feed $49.95
Locktite Products
Visit our Web site for full information about these Locktite products.
3986 Loctite 222 Purple Low Strenght Threadlocker for Small Fasteners $12.95
3987 Loctite 242 Medium Strength Blue Threadlocker $12.95
3988 Loctite 271 High Strength Red Threadlocker $12.95
3989 Loctite 7649 Primer for Threadlockers $10.95
3866 V-TapGuide Hand Tap Guide Set, Inch, Metric & Free Hat $39.90
● Both inch and metric threads, plus a free hat
● Eliminate tap breakage due to improper alignment
● Automatically squares up the tap with the surface
● 90 degree V-groove along the bottom allows perpendicular alignment on round parts or corners
● Portable, pocket size. Protective plastic storage tube is included
V-TapGuide™ by Big Gator Tools™ is made of a special alloyed steel that is ground and heat treated
for durability. The guide holes are smooth, unlike drilled or reamed holes. Guide holes are sized
for ANSI standard ground taps.
The standard inch V-TapGuide can handle tap sizes of 0-80, 1-64, 1-72, 2-56, 2-64, 3-48, 3-56, 4-36,
4-40, 4-48, 5-40, 5-44, 6-32, 6-36, 6-40, 8-32, 8-36, 8-40, 10-24, 10-32, ¼-20, ¼-28, 5/16-18, 5/16-
24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, ½-13, ½-20, 5/8-11, and 5/8-18.
The metric V-TapGuide can handle tap sizes of 1.6mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 5mm,
6mm, 8mm, 10mm, 12mm, 14mm, and 16mm.
3865 Hat, Big Gator Tools $9.95
3427 V-TapGuide Hand Tap Guide for Inch Threads $19.95
3428 V-TapGuide Hand Tap Guide for Metric Threads $19.95
With just three 360° turns, the easy to use adjusting screw will tension the blade up to 28,000 psi
(2,000kg/cm) which prevents the blade from twisting and binding when bearing down on the cut.
Each K153 Heavy Duty High-Tension Frame is shipped with a Starrett Bluestripe bi-metal unique
ground tooth hacksaw blade.
1849 Hacksaw Blade, Bi-Metal, 14 TPI, Starrett $1.62
2193 DVD: Building a Spindle Gauge for the Mini Lathe $33.00
This video, by Jose Rodriguez, provides a 2 hour study on how to build a spindle gauge to check the
size of adapters and other accessories you make to fit the spindle of your lathe.
Jose says: "Make all the spindle accessories you will need for your lathe with a simple, easy to
make spindle gauge. This tape will take you through a full two hour, detailed demonstration on
how to make a precision spindle gauge directly on your 7 x 10 that you can then use to machine
matching spindle tooling not presently available for this lathe. All this without having to remove
the chuck! You will need to remove it only once in the beginning to take two initial micrometer
measurements for the diameter and thickness of the mounting back plate / flange. The author has
adapted a four jaw chuck for it, has made a slotted face plate, a driving catch plate and dog clamp
and is presently working on a collet chuck with frontal collet closer that will directly mount to the
spindle. A must have for those wishing they could have more spindle tooling than just the three
jaw chuck the lathe comes equipped with!"
Best of all, the principle of the oscillating cylinder can be put into use for much more complicated
projects. SwarfRat took the basic kit and a few inches of aluminum stock to make another simple
cylinder and piston, ending up with a variable-angle twin cylinder engine.
You could easily make multi-cylinder engines in boxxer, V-twin or radial format using this
principle, and they'd be buildable with only basic machinist skills. This is truly a learning
experience.
The DVD includes (on disk, not printed) a complete set of drawings for the engine, a materials list,
and instructions.
3962 DVD: Lathe Tool Sharpening and 1/4" Tool Bits $42.90
● Lathe Tool Sharpening DVD
● 10 Lathe tool bits, 1/4" Square 2-1/2" Long M2 HSS
This DVD video, by Jose Rodriguez, provides an hour and a half instruction on sharpening lathe
cutting tools and other grinding tasks.
Learn how to create perfect lathe cutting tools from high speed steel tool bit blanks with a bench-
top grinder. Create perfect left or right hand lathe cutting tools for brass, aluminum and steel.
Produce a 60 degree threading tool that is as good as any commercially available threading tool
bit. Learn how to prepare a parting tool for optimum results. Watch Jose as he revives an old
jobber-length drill bit to give it a new lease on life. Put a new edge on worn two flute end mills
and get many more hours of work out of them. Regrind screw driver tips to keep them from
slipping off screw heads.
Grinding is an art that can take months or years to fully master but with the right grinder and a bit
of patience, you will be able to produce perfect results right in your shop.
3964 DVD: Lathe Tool Sharpening and 3/8" Tool Bits $54.90
● Lathe Tool Sharpening DVD
● 10 Lathe tool bits, 3/8" Square 2-1/2" Long M2 HSS
This DVD video, by Jose Rodriguez, provides an hour and a half instruction on sharpening lathe
cutting tools and other grinding tasks.
Learn how to create perfect lathe cutting tools from high speed steel tool bit blanks with a bench-
top grinder. Create perfect left or right hand lathe cutting tools for brass, aluminum and steel.
Produce a 60 degree threading tool that is as good as any commercially available threading tool
bit. Learn how to prepare a parting tool for optimum results. Watch Jose as he revives an old
jobber-length drill bit to give it a new lease on life. Put a new edge on worn two flute end mills
and get many more hours of work out of them. Regrind screw driver tips to keep them from
slipping off screw heads.
Grinding is an art that can take months or years to fully master but with the right grinder and a bit
of patience, you will be able to produce perfect results right in your shop.
3963 DVD: Lathe Tool Sharpening and 5/16" Tool Bits $43.90
● Lathe Tool Sharpening DVD
● 10 Lathe tool bits, 5/16" Square 2-1/2" Long M2 HSS
This DVD video, by Jose Rodriguez, provides an hour and a half instruction on sharpening lathe
cutting tools and other grinding tasks.
Learn how to create perfect lathe cutting tools from high speed steel tool bit blanks with a bench-
top grinder. Create perfect left or right hand lathe cutting tools for brass, aluminum and steel.
Produce a 60 degree threading tool that is as good as any commercially available threading tool
bit. Learn how to prepare a parting tool for optimum results. Watch Jose as he revives an old
jobber-length drill bit to give it a new lease on life. Put a new edge on worn two flute end mills
and get many more hours of work out of them. Regrind screw driver tips to keep them from
slipping off screw heads.
Grinding is an art that can take months or years to fully master but with the right grinder and a bit
of patience, you will be able to produce perfect results right in your shop.
3567 DVD: The Vise Squad - Precision Workholding and Measuring Techniq $19.95
● Mini Machines 202 series
Have you wanted to learn how to use a sine bar? How to set up and hold a precise angle when
milling a part? How to deal with the trigonometry involved with finding the correct spaceblock
height for a sinebar or vise?
This volume will demonstrate and explain the use of precision, Kurt style and Sine vises, as well as
sine bars and sine plates.
Some of the topics covered are: Intro & Shop Safety, General vise mounting and basics, Screwless
precision and sine vises, Angle plates, Law of Sines
Space blocks, Sine bars, plates, vises, compound angles, Kurt Anglelock Vise, and angular
tramming.
With the purchase of this DVD, you've also purchased a single-user license to use the SineBuddy
sine bar & space block calculator included on the DVD. This calculator takes care of the
trigonometry involved in calculating angles and spaceblocks.
Vises: Accessories
Vise Comparison
See the vise comparison chart at the back of this catalog.
Description 2" Quick 4" Quick 3" Milling 3" Precision 3" Precision 4" Precision 1" Screwless 2" Screwless 3" Screwless 3" Screwless
Vise Vise Vise Milling Vise Milling Milling Vise Vise Vise Sine Vise
Vise, Heavy Vise, Heavy
Price $35.95 $49.95 $54.95 $89.95, $129.95 $99.95 $129.95 $34.95 $44.95 $49.95, $79.95 $109.00
Jaw width 1.95" 3.94" 3.15" 3.1" 3.15" 4" 1.00" 1.97" 2.88" 3.15"
Jaw depth 0.63" 0.88" 1.21" 1.0" 1.04" 1.18" 0.36" 0.98" 1.38" 1.25"
Maximum 1.48" 3.23" 2.56" 2.85" 3.0" 4.0" 1.00" 2.39" 3.95" 4.0"
jaw
opening
Weight 1.7 lbs 11 lbs 13.5 lbs 19 lbs 22 lbs 35 lbs 0.5 lbs 3 lbs 8.5 lbs 10 lbs
Height 1.55" 2.63" 3.60" 3.87" 4.21" 4.72" 1.14" 1.95" 2.76"
(w/o base) (2.75") (2.87") (3.05")
Length 5.50" 10.50" 8.63" 10" 10.85" 13.4" 2.57" 5.32" 7.63" 7.63"
Width 2.35" 3.92" 6.30" 7.25" 7.75" 9" 1.00" 1.97" 2.88" 3.05"
(w/o base) (4.10") (5.5") (5.15")
Mounting 1.78" 2.20" 5.50" 6.38" 6.50" n/a n/a n/a n/a
bolt (3.00") (3.95") (4.25")
centers
(w/o base)
Ratio 72 to 1 72 to 1 72 to 1 72 to 1 90 to 1
T-slot size 8 mm 6 mm 6 mm 10 mm 10 mm
1669 3/8" Turning Tools, 1724 TCGW-21.51 1/64" 3416 TCMT-21.50 0.008"
Phase II 1725 TCGW-21.52 1/32" 1670 TCMT-21.51 1/64"
3417 TCMT-21.52 1/32"
2286 1/2" Turning Tools 3698 TCMW-321 1/64" 2381 TCMM-321 1/64"
1779 3/8" Boring Bar, Phase II 3696 CCMW-2-1.5-1 1/64" 1781 CCMT 21.51 1/64"
1780 1/2" Boring Bar, Phase II 3573 CCMW-3-2.5-.5 0.008" 1795 CCMT 32.52 1/32"
3574 CCMW-3-2.5-1 1/64"
3575 CCMW-3-2.5-2 1/32"
2431 Profiling Tool, 3/8" HSS 3470 VCMW-222 1/32" 3471 VCMT-222 1/32"
& Carbide Inserts
3572 Grooving & Cutoff Tool, 3576 1/64" (0.015") Groover 0"
A R Warner 3577 1/32" (0.031") Groover 0"
3578 1/16" (0.062") Groover 0"
Rated capacity
Part Center
number Chuck Diameter hole Inside jaws Outside jaws
Rated capacity
Part Center
number Chuck Diameter hole Inside jaws Outside jaws
Rated capacity
Part Center
number Chuck Diameter hole Inside jaws Outside jaws
Phone Phone
Email Fax
I would like to receive occasional announcements of sales and new products by email.
Subtotal
Shipping & handling (see table below)
California residents add 8¼% sales tax
Total
Shipping & Handling: Web For next-day shipping and secure credit card
payment, place your order on our web site:
Less than $25.00 $7.00
www.LittleMachineShop.com
$25.00 to $49.99 $9.00
Mail Mail your order with your credit card information or
$50.00 to $74.99 $10.00 a check to:
$75.00 to $99.99 $11.00 LittleMachineShop.com
$100.00 to $12.50 396 W Washington Blvd Ste 500
$149.99 Pasadena CA 91103-2002
$150.00 to 8% of Phone Call us at 800 981 9663 or 626 797 7850 to place
$399.99 subtotal your order.
$400.00 or more 6% of Fax Fax this page with your credit card information to
subtotal 626 797 7934.
Ground service to US addresses Card
only. Contact us for rates for Number
other services and destinations.
Expiration Security
Date Code
PRSRT STANDARD
U.S. POSTAGE
The premier source of tooling, parts,
and accessories for bench top machinists. PAID
PASADENA, CA
396 W Washington Blvd #500 • Pasadena, CA 91103 PERMIT NO. 648