Escolar Documentos
Profissional Documentos
Cultura Documentos
Comaand line ‘l’ enter select the point or give the distance or specify point (x,y) along with angle if
not a straight line
Circle
Polygon :
Arc:
3 point arc, angle, radius and centre point and length of arc
Osnap on for getting end pts centers tangent mid pts etc.,
Isoplane(f5) determines wheter the crosshair i.e. pointer lies in top isometric plane or other that is
top view front left etc.,
Grid(f7)
Multiple
Move
Copy
Offset
Extend:
Spline command used draw spline curve as drawn at the shaft ends in machine design
Rotate
Mirror command select obj , specify 1 and 2 point of mirror plane or any line about which object is to
be mirrored, click on the side where object is to be mirrored
Array
Specify type for rectangular—rows, columns, offset distance and direction./ for polar(circular)
angle, depending on no. I.e., 90 deg for 4 (360/no.)
Hatch
Matchprop matches properties of one line i.e., thickness width to other lines or elements like arc
etc.,
Layers
DDEDIT:
EDITS TEXT, DIMENSION TEXT,--- SHORTCUT MENU:SELECT A TEXT OBJECT RIGHT CLICK IN THE
DRAWING AREA AND CHOOSE MTEXT EDIT OR TEXT EDIT
USE DIMRADIUS COMMAND AND GET A LEADER LINE AND WRITE NECESSARY TEXT USING DIM EDIT