Drafter is to confirm points below with drafting supervisor before starting d rafting. Selfcheck by the Drafter should be for all the points in the checklist. -Drawing Format and Scale -Graphic Scale -Color Codes -Line Weight and Layering -Background -Coordinates are at 0.
Drafter is to confirm points below with drafting supervisor before starting d rafting. Selfcheck by the Drafter should be for all the points in the checklist. -Drawing Format and Scale -Graphic Scale -Color Codes -Line Weight and Layering -Background -Coordinates are at 0.
Direitos autorais:
Attribution Non-Commercial (BY-NC)
Formatos disponíveis
Baixe no formato TXT, PDF, TXT ou leia online no Scribd
Drafter is to confirm points below with drafting supervisor before starting d rafting. Selfcheck by the Drafter should be for all the points in the checklist. -Drawing Format and Scale -Graphic Scale -Color Codes -Line Weight and Layering -Background -Coordinates are at 0.
Direitos autorais:
Attribution Non-Commercial (BY-NC)
Formatos disponíveis
Baixe no formato TXT, PDF, TXT ou leia online no Scribd
Drafter is to confirm points below with drafting supervisor before starting d
rafting 2. Selfcheck by the Drafter should be for all the points in the checklist. -Drawing Size and project standard border -Drawing Format and Scale -Graphic Scale -Color Codes -Line Weight and Layering -Background -Coordinates- Insertion/pick-up coordinates are at 0.0 or another reference poin t in lieu of zero -Matchlines are correct and aligned -Elevations and Dimensions (BOP, Centerline of Equipment) -Equipment Material Size and Identification -Proper Use of Model Space and Paper Space -Text Font & Height -Title Block Size, Text Font and Size -True North and Plant North representation -Tie In Points Identified -Drawing Name and Number per Document Register (fits in Key Plan) -Legends and Symbols per Company Standards -Section and Detail Call Outs -Clearance and Access Ways -Reference Drawings Identified -General or Specific Notes Listed and Identified -Bill of Materials -Information Holds -Revamp Scope of Work Clearly Shown (and Demolition, when applicable) -Changes Identified with Cloud and Triangle -Appropriate Revision Call Out & letter/number -Initials and Signatures in Rev. Block -Drawing Content per Engineering Mark-up Yellow Line Check -Plot settings and plotter settings are consistent -Saved in Autocad with specific version -Drawing Stored in Appropriate Project Folder