Escolar Documentos
Profissional Documentos
Cultura Documentos
Company name: POSCO-LILAMA E&C Welding Process (es): Supporting PQR No.(s):
JOINT DESIGN USE Type: Single: Backing: Yes Backing Material : Root Opening 0 Groove Angle Back Gouging: Yes BASE METALS Material Spec. Type or Grade Thickness: Groove: Fillet: Diameter (Pipe) : FILLER METALS AWS Specification: AWS Classification: SHIELDING Flux: Electrode-Flux (Class) :
Date:
Semi-Automatic Automatic
By: Date:
Fillet:
Vertical Progression:
Up
Down
to:
ELECTRICAL CHARACTERISTICS Transfer Mode(GMAW): Short-Circuiting Globular Spray Current: AC DCEP DCEN Pulsed Power Source: CC CV Other: Tungsten electrode (GTAW) Size : Type: TECHNIQUE Stringer or Weave Bead : Multi-pass or Single pass(per side): Number of Electrodes : Electrode Spacing: Longitudinal : Lateral: Angle : Contract Tube to Work Distance : Peening :
Interpass Cleaning:
POST-WELD HEAT TREATMENT Temp:
Max:
Time:
WELDING PROCEDURE
Pass or Weld Layer(s) Filler Metals Process Class Diam. (mm) Type & Polarity Current Amps (A) Volts (V) Travel Speed (Cm/Min)
BACK SIDE
1 of 2
Remark:
Prepared
Reviewed:
Approved :
2 of 2