Você está na página 1de 7

IPMIP-GS Series

Contents
Specifications summary Motherboard layout Rear panel connectors Internal connectors

Motherboard layout reference

This manual is meant as a general reference guide. Refer to the product itself for actual specifications.

Specifications summary
* The following components may be available depending on model. Model Super model H55 H57/Q57 CPU Chipset Memory Expansion slots HDMI port Optional No HDMI port No HDMI port Socket : Intel Socket 1156 Supports : Clarkdale North Bridge : Ibex peak (H55/H57/Q57) Dual-channel, 4 slots, Non-ECC, Unbuffered, 240 pin DDR3, Max. 16GB Types: 1066/PC3-8500, 1333/PC3-10600 1x PCI Express slot (x16) 1x PCI Express slot (x4) 1x PCI Express slot (x1) 1x PCI slot ALC888S-VC2 (8-channel) or ALC662 (6-channel) Gigabit: Intel hanksville (PHY) 14x USB 2.0 ports, 12/480Mbps (12 ports on H55 sku) 1x Mouse (PS/2) port + 1x Keyboard (PS/2) port 1x Display (VGA) port + 1x Display (DVI-I) port * Display (HDMI) port 1x LAN (RJ-45) port + 2x USB 2.0 ports 2x USB 2.0 ports + 1x e-SATA port 6x Audio jacks (* Audio Channel) 1x ATX CPU power connector 1x ATX power connector 1x CPU fan connector 1x System fan connector 5x SATA connectors 1x Front panel audio connector 2x Internal SPDIF output connectors 1x CD in connector 1x Internal serial port connector 5x USB 2.0 connectors 1x TPM connector 1x Chassis intrusion alarm connector 1x Front panel connector SPI 64Mb for H/Q SKU (AMI) microATX, 9.6 inches x 9.6 inches Audio Channel 8-channel or 6-channel 5.1 channel 8-channel or 6-channel

Audio LAN USB Rear panel I/O ports

Internal connectors

BIOS Form factor

IPMIP-GS motherboard layout reference

Motherboard layout
Keyboard Power selecter Keyboard & mouse (PS/2) ports System Fan Connector
KB PWR

ATX CPU Power Connector

CPU Fan Connector

KB +MS CPU FAN SYSTEM FAN

Display ports (DVI)(VGA)

DVI+VGA

Memory sockets

XIMM2

XIMM1

XIMM4

LAN + USB

ATXPOWER

LAN & USB connectors

ATX_CPU

XIMM3

*HDMI port (Depending on Model)

HDMI

Intel LGA1156 socket

ATX power connector

eSATA & USB connectors

eSATA + USB

Audio ports Chassis Intrusion Alarm Connector CD in connector PCIE4 slot Front panel audio connector PCIE1 slot PCI slot Internal SPDIF output connector

AUDIO

BATTERY

TPM Connector
TPM

PCIE X16 SLOT INTRUDER BUZZER BUZZER_HEADER PCIE X4 SLOT F_AUDIO SATA SATA0 SATA3 SATA1 SATA4 SATA2 SERIAL_A CMOS +PW PCI SLOT F_USB5 SPDIF_OUT2 SPDIF_OUT1 FLASH_OVERRIDE F_USB4 F_USB2 F_USB3 F_USB1 SW51 F_PANEL

PCIE16 slot Buzzer header ROM recovery connector SATA connectors Internal serial port connector Clear CMOS & password selectors Clear ME data selector

CD

ROM_RECOVERY

PCIE X1 SLOT1

Internal SPDIF output connector

FLASH override selecter

USB 2.0 connectors

USB 2.0 connectors

Front panel connector

IPMIP-GS motherboard layout reference

Rear panel connectors Super model:


Mouse (PS/2) port Display (VGA) port LAN (RJ-45) port USB2.0 ports

(Audio Channel: 8 or 6 channels) Black: Side Surround L/R Out Orange: Center/Subwoofer Blue: Line In Lime: Front L/R Out Pink: Mic In

Keyboard (PS/2) port

Display (DVI-I) port

Display (HDMI) port USB2.0 (optional) ports

e-SATA port

Gray: Rear Surround L/R Out

H55:
Mouse (PS/2) port Display (VGA) port LAN (RJ-45) port USB2.0 ports (Audio Channel: 5.1 channels) Blue: Line In Green: Front-L/R out Pink: Mic In Keyboard (PS/2) port Display (DVI-I) port USB2.0 ports e-SATA port

H57/Q57:
Mouse (PS/2) port Display (VGA) port LAN (RJ-45) port USB2.0 ports

(Audio Channel: 8 or 6 channels) Black: Side Surround L/R Out Orange: Center/Subwoofer Blue: Line In Lime: Front L/R Out Pink: Mic In

Keyboard (PS/2) port

Display (DVI-I) port

USB2.0 ports

e-SATA port

Gray: Rear Surround L/R Out

IPMIP-GS motherboard layout reference

LAN port LED indications


Left (ACTIVITY) Orange : Activity Off : No Link Right (LINK) Green : 1G Link Orange : 100M Link Off : 10M Link

LAN port

Function Selectors

CMOS
5 3 1 6 4 2 5 3 1 6 4 2

PW
5 3 1 6 4 2 5 3 1 6 4 2

(Default) Clear CMOS

(Default) Clear Password

CLEAR CMOS SELECTOR


To erase the CMOS RTC RAM user settings: 1. Turn OFF the computer and unplug the power cord. 2. Move the cap to clear for 5 to 10 secs, then move cap back to default. 3. Plug the power cord and turn ON the computer. 4. During the boot process, enter BIOS setup to re-enter user settings.

CLEAR PASSWORD SELECTOR


To erase the CMOS RTC RAM password: 1. Turn OFF the computer. 2. Move the cap to Clear, then turn ON the computer to POST screen. 3. Press the power button to turn OFF the computer. 4. Move the cap back to Default. 5. Turn ON the computer. 6. Enter BIOS setup to verify or configure new settings.

KBPWR
1 2 3 1 2 3

+5VSB +5V_DUAL (Default)

FLASH_OVERRIDE
1 2 3 1 2 3

(Default) Flash override

KEYBOARD & MOUSE POWER SELECTOR

FLASH OVERRIDE (Intel Management Engine) SELECTOR

SW51
1 2 3 1 2 3

Normal Clear (Default)

CLEAR ME DATA SELECTOR

IPMIP-GS motherboard layout reference

Internal connectors
ATX_CPU
Ground +12V DC

ATXPOWER
+3 Volts +12 Volts +12 Volts +5V Standby Power OK Ground +5 Volts Ground +5 Volts Ground +3 Volts +3 Volts Ground +5 Volts +5 Volts +5 Volts 5 Volts Ground Ground Ground PSON# Ground 12 Volts +3 Volts

ATX CPU POWER CONNECTOR CPU_FAN

Ground +12V DC

ATX POWER CONNECTOR

SYSTEM_FAN
Ground +12V Rotation

CPU FAN CONNECTOR

CPUFAN_PWM CPUFAN_TACH +12V GND

SYSTEM FAN CONNECTOR

SATA 0 SATA 3 SATA 1


Ground SATA_TX(+) SATA_TX(-) Ground SATA_RX(-) SATA_RX(+) Ground

F_AUDIO
GROUND F_AUDIO_DET# MIC_JD LINE_JD

Ground SATA_RX(+) SATA_RX(-) Ground SATA_TX(-) SATA_TX(+) Ground

SATA 4 SATA 2

SATA CONNECTORS

FRONT PANEL AUDIO CONNECTOR

SPDIF_OUT1 SPDIF_OUT2
SPDIF out Ground

SPDIF out Ground

INTERNAL SPDIF OUTPUT CONNECTORS

+5V

+5V

CD IN CONNECTOR

SERIAL_A
RRXD* DDTR*# DDSR*# CCTS*#

MIC*_L MIC*_R LINE*_R JACK_SENSE LINE*_L

CD1
Left Audio Channel Ground Ground Right Audio Channel

F_USB1 F_USB5 F_USB4 F_USB2 F_USB3


SBV USB*(-) USB*(+) Ground NC SBV USB*(-) USB*(+) Ground

INTERNAL SERIAL PORT CONNECTORS

DDC*# TTXD* Ground RRTS*# RRT*#

USB CONNECTORS

IPMIP-GS motherboard layout reference

Internal connectors (cont.)


TPM
SMB_CLK_M CLKRUN# SERIRQ +BATT GND LAD1 LAD2 SMB_DATA_M NC GND LPCPD# GND +3P3VSB LDRQ1# LAD0 +3P3V LAD3 S_PLTRST# LFRAME# CK_33M_TPM

INTRUDER
GND R_INTRUDER# NC +5VSB

TPM (Trusted Platform Module) CONNECTOR F_PANEL


PWR_LED PWR_BTN
PLED(+) PLED(-) PWR Ground

CHASSIS INTRUSION ALARM CONNECTOR

HD_LED RESET

FRONT PANEL CONNECTOR

HDLED(+) HDLED(-) Ground Reset NC

IPMIP-GS motherboard layout reference

Você também pode gostar